From: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
To: qemu-devel@nongnu.org, qemu-block@nongnu.org
Cc: mreitz@redhat.com, kwolf@redhat.com, den@openvz.org,
vsementsov@virtuozzo.com
Subject: [Qemu-devel] [PATCH 3/7] qcow2: move decompression from qcow2-cluster.c to qcow2.c
Date: Thu, 1 Nov 2018 21:27:34 +0300 [thread overview]
Message-ID: <20181101182738.70462-4-vsementsov@virtuozzo.com> (raw)
In-Reply-To: <20181101182738.70462-1-vsementsov@virtuozzo.com>
Compression is done in threads in qcow2.c. We want to do decompression
in the same way, so, firstly, move it to the same file.
The only change is braces around if-body in decompress_buffer, to
satisfy checkpatch.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
---
block/qcow2-cluster.c | 70 ------------------------------------------
block/qcow2.c | 71 +++++++++++++++++++++++++++++++++++++++++++
2 files changed, 71 insertions(+), 70 deletions(-)
diff --git a/block/qcow2-cluster.c b/block/qcow2-cluster.c
index d37fe08b3d..e2737429f5 100644
--- a/block/qcow2-cluster.c
+++ b/block/qcow2-cluster.c
@@ -1571,76 +1571,6 @@ again:
return 0;
}
-static int decompress_buffer(uint8_t *out_buf, int out_buf_size,
- const uint8_t *buf, int buf_size)
-{
- z_stream strm1, *strm = &strm1;
- int ret, out_len;
-
- memset(strm, 0, sizeof(*strm));
-
- strm->next_in = (uint8_t *)buf;
- strm->avail_in = buf_size;
- strm->next_out = out_buf;
- strm->avail_out = out_buf_size;
-
- ret = inflateInit2(strm, -12);
- if (ret != Z_OK)
- return -1;
- ret = inflate(strm, Z_FINISH);
- out_len = strm->next_out - out_buf;
- if ((ret != Z_STREAM_END && ret != Z_BUF_ERROR) ||
- out_len != out_buf_size) {
- inflateEnd(strm);
- return -1;
- }
- inflateEnd(strm);
- return 0;
-}
-
-int qcow2_decompress_cluster(BlockDriverState *bs, uint64_t cluster_offset)
-{
- BDRVQcow2State *s = bs->opaque;
- int ret, csize, nb_csectors, sector_offset;
- uint64_t coffset;
-
- coffset = cluster_offset & s->cluster_offset_mask;
- if (s->cluster_cache_offset != coffset) {
- nb_csectors = ((cluster_offset >> s->csize_shift) & s->csize_mask) + 1;
- sector_offset = coffset & 511;
- csize = nb_csectors * 512 - sector_offset;
-
- /* Allocate buffers on first decompress operation, most images are
- * uncompressed and the memory overhead can be avoided. The buffers
- * are freed in .bdrv_close().
- */
- if (!s->cluster_data) {
- /* one more sector for decompressed data alignment */
- s->cluster_data = qemu_try_blockalign(bs->file->bs,
- QCOW_MAX_CRYPT_CLUSTERS * s->cluster_size + 512);
- if (!s->cluster_data) {
- return -ENOMEM;
- }
- }
- if (!s->cluster_cache) {
- s->cluster_cache = g_malloc(s->cluster_size);
- }
-
- BLKDBG_EVENT(bs->file, BLKDBG_READ_COMPRESSED);
- ret = bdrv_read(bs->file, coffset >> 9, s->cluster_data,
- nb_csectors);
- if (ret < 0) {
- return ret;
- }
- if (decompress_buffer(s->cluster_cache, s->cluster_size,
- s->cluster_data + sector_offset, csize) < 0) {
- return -EIO;
- }
- s->cluster_cache_offset = coffset;
- }
- return 0;
-}
-
/*
* This discards as many clusters of nb_clusters as possible at once (i.e.
* all clusters in the same L2 slice) and returns the number of discarded
diff --git a/block/qcow2.c b/block/qcow2.c
index 9eab2dbfb6..b45a6c4135 100644
--- a/block/qcow2.c
+++ b/block/qcow2.c
@@ -3758,6 +3758,34 @@ static ssize_t qcow2_compress(void *dest, size_t dest_size,
return ret;
}
+static int decompress_buffer(uint8_t *out_buf, int out_buf_size,
+ const uint8_t *buf, int buf_size)
+{
+ z_stream strm1, *strm = &strm1;
+ int ret, out_len;
+
+ memset(strm, 0, sizeof(*strm));
+
+ strm->next_in = (uint8_t *)buf;
+ strm->avail_in = buf_size;
+ strm->next_out = out_buf;
+ strm->avail_out = out_buf_size;
+
+ ret = inflateInit2(strm, -12);
+ if (ret != Z_OK) {
+ return -1;
+ }
+ ret = inflate(strm, Z_FINISH);
+ out_len = strm->next_out - out_buf;
+ if ((ret != Z_STREAM_END && ret != Z_BUF_ERROR) ||
+ out_len != out_buf_size) {
+ inflateEnd(strm);
+ return -1;
+ }
+ inflateEnd(strm);
+ return 0;
+}
+
#define MAX_COMPRESS_THREADS 4
typedef struct Qcow2CompressData {
@@ -3911,6 +3939,49 @@ fail:
return ret;
}
+int qcow2_decompress_cluster(BlockDriverState *bs, uint64_t cluster_offset)
+{
+ BDRVQcow2State *s = bs->opaque;
+ int ret, csize, nb_csectors, sector_offset;
+ uint64_t coffset;
+
+ coffset = cluster_offset & s->cluster_offset_mask;
+ if (s->cluster_cache_offset != coffset) {
+ nb_csectors = ((cluster_offset >> s->csize_shift) & s->csize_mask) + 1;
+ sector_offset = coffset & 511;
+ csize = nb_csectors * 512 - sector_offset;
+
+ /* Allocate buffers on first decompress operation, most images are
+ * uncompressed and the memory overhead can be avoided. The buffers
+ * are freed in .bdrv_close().
+ */
+ if (!s->cluster_data) {
+ /* one more sector for decompressed data alignment */
+ s->cluster_data = qemu_try_blockalign(bs->file->bs,
+ QCOW_MAX_CRYPT_CLUSTERS * s->cluster_size + 512);
+ if (!s->cluster_data) {
+ return -ENOMEM;
+ }
+ }
+ if (!s->cluster_cache) {
+ s->cluster_cache = g_malloc(s->cluster_size);
+ }
+
+ BLKDBG_EVENT(bs->file, BLKDBG_READ_COMPRESSED);
+ ret = bdrv_read(bs->file, coffset >> 9, s->cluster_data,
+ nb_csectors);
+ if (ret < 0) {
+ return ret;
+ }
+ if (decompress_buffer(s->cluster_cache, s->cluster_size,
+ s->cluster_data + sector_offset, csize) < 0) {
+ return -EIO;
+ }
+ s->cluster_cache_offset = coffset;
+ }
+ return 0;
+}
+
static int make_completely_empty(BlockDriverState *bs)
{
BDRVQcow2State *s = bs->opaque;
--
2.18.0
next prev parent reply other threads:[~2018-11-01 18:27 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-01 18:27 [Qemu-devel] [PATCH 0/7] qcow2 decompress in threads Vladimir Sementsov-Ogievskiy
2018-11-01 18:27 ` [Qemu-devel] [PATCH 1/7] qcow2: use Z_OK instead of 0 for deflateInit2 return code check Vladimir Sementsov-Ogievskiy
2018-11-05 15:30 ` [Qemu-devel] [Qemu-block] " Alberto Garcia
2018-11-01 18:27 ` [Qemu-devel] [PATCH 2/7] qcow2: make more generic interface for qcow2_compress Vladimir Sementsov-Ogievskiy
2018-11-05 15:45 ` [Qemu-devel] [Qemu-block] " Alberto Garcia
2018-11-01 18:27 ` Vladimir Sementsov-Ogievskiy [this message]
2018-11-05 15:45 ` [Qemu-devel] [Qemu-block] [PATCH 3/7] qcow2: move decompression from qcow2-cluster.c to qcow2.c Alberto Garcia
2018-11-01 18:27 ` [Qemu-devel] [PATCH 4/7] qcow2: refactor decompress_buffer Vladimir Sementsov-Ogievskiy
2018-11-06 10:45 ` [Qemu-devel] [Qemu-block] " Alberto Garcia
2018-11-01 18:27 ` [Qemu-devel] [PATCH 5/7] qcow2: use byte-based read in qcow2_decompress_cluster Vladimir Sementsov-Ogievskiy
2018-11-06 13:53 ` [Qemu-devel] [Qemu-block] " Alberto Garcia
2018-11-06 15:18 ` Vladimir Sementsov-Ogievskiy
2018-11-01 18:27 ` [Qemu-devel] [PATCH 6/7] qcow2: aio support for compressed cluster read Vladimir Sementsov-Ogievskiy
2018-11-06 15:06 ` [Qemu-devel] [Qemu-block] " Alberto Garcia
2018-11-06 15:13 ` Vladimir Sementsov-Ogievskiy
2018-11-06 15:30 ` Alberto Garcia
2018-11-06 16:24 ` Vladimir Sementsov-Ogievskiy
2018-11-09 13:51 ` Alberto Garcia
2018-11-01 18:27 ` [Qemu-devel] [PATCH 7/7] qcow2: do decompression in threads Vladimir Sementsov-Ogievskiy
2018-11-06 14:03 ` [Qemu-devel] [Qemu-block] " Alberto Garcia
2018-11-06 23:40 ` [Qemu-devel] " Paolo Bonzini
2018-11-12 15:32 ` [Qemu-devel] [PATCH 0/7] qcow2 decompress " Kevin Wolf
2018-11-12 16:16 ` Vladimir Sementsov-Ogievskiy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181101182738.70462-4-vsementsov@virtuozzo.com \
--to=vsementsov@virtuozzo.com \
--cc=den@openvz.org \
--cc=kwolf@redhat.com \
--cc=mreitz@redhat.com \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).