From: David Hildenbrand <david@redhat.com>
To: qemu-devel@nongnu.org
Cc: "Michael S . Tsirkin" <mst@redhat.com>,
Igor Mammedov <imammedo@redhat.com>,
Marcel Apfelbaum <marcel.apfelbaum@gmail.com>,
Alexander Graf <agraf@suse.de>,
David Gibson <david@gibson.dropbear.id.au>,
Eduardo Habkost <ehabkost@redhat.com>,
"Dr . David Alan Gilbert" <dgilbert@redhat.com>,
Cornelia Huck <cohuck@redhat.com>,
Christian Borntraeger <borntraeger@de.ibm.com>,
Richard Henderson <rth@twiddle.net>,
qemu-ppc@nongnu.org, qemu-s390x@nongnu.org,
David Hildenbrand <david@redhat.com>
Subject: [Qemu-devel] [PATCH v2 04/10] pci/pcie: stop plug/unplug if the slot is locked
Date: Mon, 5 Nov 2018 11:20:38 +0100 [thread overview]
Message-ID: <20181105102044.20547-5-david@redhat.com> (raw)
In-Reply-To: <20181105102044.20547-1-david@redhat.com>
We better stop right away. While at it, properly move the check
to the pre_plug handler.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
---
hw/pci/pcie.c | 25 +++++++++++++++++--------
hw/pci/pcie_port.c | 1 +
include/hw/pci/pcie.h | 2 ++
3 files changed, 20 insertions(+), 8 deletions(-)
diff --git a/hw/pci/pcie.c b/hw/pci/pcie.c
index 44737cc1cd..ccba29269e 100644
--- a/hw/pci/pcie.c
+++ b/hw/pci/pcie.c
@@ -316,10 +316,10 @@ static void pcie_cap_slot_event(PCIDevice *dev, PCIExpressHotPlugEvent event)
}
static void pcie_cap_slot_plug_common(PCIDevice *hotplug_dev, DeviceState *dev,
- uint8_t **exp_cap, Error **errp)
+ Error **errp)
{
- *exp_cap = hotplug_dev->config + hotplug_dev->exp.exp_cap;
- uint16_t sltsta = pci_get_word(*exp_cap + PCI_EXP_SLTSTA);
+ uint8_t *exp_cap = hotplug_dev->config + hotplug_dev->exp.exp_cap;
+ uint16_t sltsta = pci_get_word(exp_cap + PCI_EXP_SLTSTA);
PCIE_DEV_PRINTF(PCI_DEVICE(dev), "hotplug state: 0x%x\n", sltsta);
if (sltsta & PCI_EXP_SLTSTA_EIS) {
@@ -330,14 +330,19 @@ static void pcie_cap_slot_plug_common(PCIDevice *hotplug_dev, DeviceState *dev,
}
}
+void pcie_cap_slot_pre_plug_cb(HotplugHandler *hotplug_dev, DeviceState *dev,
+ Error **errp)
+{
+ pcie_cap_slot_plug_common(PCI_DEVICE(hotplug_dev), dev, errp);
+}
+
void pcie_cap_slot_plug_cb(HotplugHandler *hotplug_dev, DeviceState *dev,
Error **errp)
{
- uint8_t *exp_cap;
+ PCIDevice *hotplug_pdev = PCI_DEVICE(hotplug_dev);
+ uint8_t *exp_cap = hotplug_pdev->config + hotplug_pdev->exp.exp_cap;
PCIDevice *pci_dev = PCI_DEVICE(dev);
- pcie_cap_slot_plug_common(PCI_DEVICE(hotplug_dev), dev, &exp_cap, errp);
-
/* Don't send event when device is enabled during qemu machine creation:
* it is present on boot, no hotplug event is necessary. We do send an
* event when the device is disabled later. */
@@ -367,11 +372,15 @@ static void pcie_unplug_device(PCIBus *bus, PCIDevice *dev, void *opaque)
void pcie_cap_slot_unplug_request_cb(HotplugHandler *hotplug_dev,
DeviceState *dev, Error **errp)
{
- uint8_t *exp_cap;
+ Error *local_err = NULL;
PCIDevice *pci_dev = PCI_DEVICE(dev);
PCIBus *bus = pci_get_bus(pci_dev);
- pcie_cap_slot_plug_common(PCI_DEVICE(hotplug_dev), dev, &exp_cap, errp);
+ pcie_cap_slot_plug_common(PCI_DEVICE(hotplug_dev), dev, &local_err);
+ if (local_err) {
+ error_propagate(errp, local_err);
+ return;
+ }
/* In case user cancel the operation of multi-function hot-add,
* remove the function that is unexposed to guest individually,
diff --git a/hw/pci/pcie_port.c b/hw/pci/pcie_port.c
index 73e81e5847..7982a87880 100644
--- a/hw/pci/pcie_port.c
+++ b/hw/pci/pcie_port.c
@@ -154,6 +154,7 @@ static void pcie_slot_class_init(ObjectClass *oc, void *data)
HotplugHandlerClass *hc = HOTPLUG_HANDLER_CLASS(oc);
dc->props = pcie_slot_props;
+ hc->pre_plug = pcie_cap_slot_pre_plug_cb;
hc->plug = pcie_cap_slot_plug_cb;
hc->unplug_request = pcie_cap_slot_unplug_request_cb;
}
diff --git a/include/hw/pci/pcie.h b/include/hw/pci/pcie.h
index 735f8e8154..d9fbcf4a4a 100644
--- a/include/hw/pci/pcie.h
+++ b/include/hw/pci/pcie.h
@@ -131,6 +131,8 @@ void pcie_ari_init(PCIDevice *dev, uint16_t offset, uint16_t nextfn);
void pcie_dev_ser_num_init(PCIDevice *dev, uint16_t offset, uint64_t ser_num);
void pcie_ats_init(PCIDevice *dev, uint16_t offset);
+void pcie_cap_slot_pre_plug_cb(HotplugHandler *hotplug_dev, DeviceState *dev,
+ Error **errp);
void pcie_cap_slot_plug_cb(HotplugHandler *hotplug_dev, DeviceState *dev,
Error **errp);
void pcie_cap_slot_unplug_request_cb(HotplugHandler *hotplug_dev,
--
2.17.2
next prev parent reply other threads:[~2018-11-05 10:25 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-05 10:20 [Qemu-devel] [PATCH v2 00/10] pci: hotplug handler reworks David Hildenbrand
2018-11-05 10:20 ` [Qemu-devel] [PATCH v2 01/10] pci/pcie: rename hotplug handler callbacks David Hildenbrand
2018-11-06 6:03 ` David Gibson
2018-11-06 8:43 ` David Hildenbrand
2018-11-19 15:43 ` Igor Mammedov
2018-11-05 10:20 ` [Qemu-devel] [PATCH v2 02/10] pci/shpc: " David Hildenbrand
2018-11-06 8:14 ` David Gibson
2018-11-19 15:56 ` Igor Mammedov
2018-11-05 10:20 ` [Qemu-devel] [PATCH v2 03/10] s390x/pci: " David Hildenbrand
2018-11-06 8:14 ` David Gibson
2018-11-08 12:38 ` Cornelia Huck
2018-11-19 15:59 ` Igor Mammedov
2018-11-05 10:20 ` David Hildenbrand [this message]
2018-11-06 23:10 ` [Qemu-devel] [PATCH v2 04/10] pci/pcie: stop plug/unplug if the slot is locked David Gibson
2018-11-07 9:03 ` David Hildenbrand
2018-11-05 10:20 ` [Qemu-devel] [PATCH v2 05/10] pci/pcihp: perform check for bus capability in pre_plug handler David Hildenbrand
2018-11-05 10:20 ` [Qemu-devel] [PATCH v2 06/10] pci/pcihp: overwrite hotplug handler recursively from the start David Hildenbrand
2018-11-19 16:31 ` Igor Mammedov
2018-11-05 10:20 ` [Qemu-devel] [PATCH v2 07/10] pci/pcihp: perform unplug via the hotplug handler David Hildenbrand
2018-11-19 16:36 ` Igor Mammedov
2018-11-05 10:20 ` [Qemu-devel] [PATCH v2 08/10] pci/pcie: " David Hildenbrand
2018-11-07 0:55 ` David Gibson
2018-11-19 16:46 ` Igor Mammedov
2018-11-05 10:20 ` [Qemu-devel] [PATCH v2 09/10] pci/shpc: " David Hildenbrand
2018-11-07 0:59 ` David Gibson
2018-11-19 17:09 ` Igor Mammedov
2018-11-20 10:11 ` David Hildenbrand
2018-11-20 14:13 ` Igor Mammedov
2018-11-20 14:34 ` David Hildenbrand
2018-11-05 10:20 ` [Qemu-devel] [PATCH v2 10/10] spapr_pci: " David Hildenbrand
2018-11-05 10:31 ` [Qemu-devel] [Qemu-ppc] " Greg Kurz
2018-11-05 10:33 ` David Hildenbrand
2018-11-07 4:22 ` [Qemu-devel] " David Gibson
2018-11-08 3:08 ` [Qemu-devel] QEMU bootup hang in tcg model using mainline QEMU code gengdongjiu
2018-11-19 17:13 ` [Qemu-devel] [PATCH v2 10/10] spapr_pci: perform unplug via the hotplug handler Igor Mammedov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181105102044.20547-5-david@redhat.com \
--to=david@redhat.com \
--cc=agraf@suse.de \
--cc=borntraeger@de.ibm.com \
--cc=cohuck@redhat.com \
--cc=david@gibson.dropbear.id.au \
--cc=dgilbert@redhat.com \
--cc=ehabkost@redhat.com \
--cc=imammedo@redhat.com \
--cc=marcel.apfelbaum@gmail.com \
--cc=mst@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=qemu-ppc@nongnu.org \
--cc=qemu-s390x@nongnu.org \
--cc=rth@twiddle.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).