From: Yuval Shaia <yuval.shaia@oracle.com>
To: yuval.shaia@oracle.com, marcel.apfelbaum@gmail.com,
dmitry.fleytman@gmail.com, jasowang@redhat.com,
eblake@redhat.com, armbru@redhat.com,
shamir.rabinovitch@oracle.com, qemu-devel@nongnu.org
Subject: [Qemu-devel] [PATCH 12/18] vmxnet3: Move some definitions to header file
Date: Mon, 5 Nov 2018 14:45:53 +0200 [thread overview]
Message-ID: <20181105124559.21561-13-yuval.shaia@oracle.com> (raw)
In-Reply-To: <20181105124559.21561-1-yuval.shaia@oracle.com>
pvrdma setup requires vmxnet3 device on PCI function 0 and PVRDMA device
on PCI function 1.
pvrdma device needs to access vmxnet3 device object for several reasons:
1. Make sure PCI function 0 is vmxnet3.
2. To monitor vmxnet3 device state.
3. To configure node_guid accoring to vmxnet3 device's MAC address.
To be able to access vmxnet3 device the definition of VMXNET3State is
moved to a new header file.
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
---
hw/net/vmxnet3.c | 116 +-----------------------------------
hw/net/vmxnet3_defs.h | 133 ++++++++++++++++++++++++++++++++++++++++++
2 files changed, 134 insertions(+), 115 deletions(-)
create mode 100644 hw/net/vmxnet3_defs.h
diff --git a/hw/net/vmxnet3.c b/hw/net/vmxnet3.c
index 3648630386..54746a4030 100644
--- a/hw/net/vmxnet3.c
+++ b/hw/net/vmxnet3.c
@@ -18,7 +18,6 @@
#include "qemu/osdep.h"
#include "hw/hw.h"
#include "hw/pci/pci.h"
-#include "net/net.h"
#include "net/tap.h"
#include "net/checksum.h"
#include "sysemu/sysemu.h"
@@ -29,6 +28,7 @@
#include "migration/register.h"
#include "vmxnet3.h"
+#include "vmxnet3_defs.h"
#include "vmxnet_debug.h"
#include "vmware_utils.h"
#include "net_tx_pkt.h"
@@ -131,23 +131,11 @@ typedef struct VMXNET3Class {
DeviceRealize parent_dc_realize;
} VMXNET3Class;
-#define TYPE_VMXNET3 "vmxnet3"
-#define VMXNET3(obj) OBJECT_CHECK(VMXNET3State, (obj), TYPE_VMXNET3)
-
#define VMXNET3_DEVICE_CLASS(klass) \
OBJECT_CLASS_CHECK(VMXNET3Class, (klass), TYPE_VMXNET3)
#define VMXNET3_DEVICE_GET_CLASS(obj) \
OBJECT_GET_CLASS(VMXNET3Class, (obj), TYPE_VMXNET3)
-/* Cyclic ring abstraction */
-typedef struct {
- hwaddr pa;
- uint32_t size;
- uint32_t cell_size;
- uint32_t next;
- uint8_t gen;
-} Vmxnet3Ring;
-
static inline void vmxnet3_ring_init(PCIDevice *d,
Vmxnet3Ring *ring,
hwaddr pa,
@@ -245,108 +233,6 @@ vmxnet3_dump_rx_descr(struct Vmxnet3_RxDesc *descr)
descr->rsvd, descr->dtype, descr->ext1, descr->btype);
}
-/* Device state and helper functions */
-#define VMXNET3_RX_RINGS_PER_QUEUE (2)
-
-typedef struct {
- Vmxnet3Ring tx_ring;
- Vmxnet3Ring comp_ring;
-
- uint8_t intr_idx;
- hwaddr tx_stats_pa;
- struct UPT1_TxStats txq_stats;
-} Vmxnet3TxqDescr;
-
-typedef struct {
- Vmxnet3Ring rx_ring[VMXNET3_RX_RINGS_PER_QUEUE];
- Vmxnet3Ring comp_ring;
- uint8_t intr_idx;
- hwaddr rx_stats_pa;
- struct UPT1_RxStats rxq_stats;
-} Vmxnet3RxqDescr;
-
-typedef struct {
- bool is_masked;
- bool is_pending;
- bool is_asserted;
-} Vmxnet3IntState;
-
-typedef struct {
- PCIDevice parent_obj;
- NICState *nic;
- NICConf conf;
- MemoryRegion bar0;
- MemoryRegion bar1;
- MemoryRegion msix_bar;
-
- Vmxnet3RxqDescr rxq_descr[VMXNET3_DEVICE_MAX_RX_QUEUES];
- Vmxnet3TxqDescr txq_descr[VMXNET3_DEVICE_MAX_TX_QUEUES];
-
- /* Whether MSI-X support was installed successfully */
- bool msix_used;
- hwaddr drv_shmem;
- hwaddr temp_shared_guest_driver_memory;
-
- uint8_t txq_num;
-
- /* This boolean tells whether RX packet being indicated has to */
- /* be split into head and body chunks from different RX rings */
- bool rx_packets_compound;
-
- bool rx_vlan_stripping;
- bool lro_supported;
-
- uint8_t rxq_num;
-
- /* Network MTU */
- uint32_t mtu;
-
- /* Maximum number of fragments for indicated TX packets */
- uint32_t max_tx_frags;
-
- /* Maximum number of fragments for indicated RX packets */
- uint16_t max_rx_frags;
-
- /* Index for events interrupt */
- uint8_t event_int_idx;
-
- /* Whether automatic interrupts masking enabled */
- bool auto_int_masking;
-
- bool peer_has_vhdr;
-
- /* TX packets to QEMU interface */
- struct NetTxPkt *tx_pkt;
- uint32_t offload_mode;
- uint32_t cso_or_gso_size;
- uint16_t tci;
- bool needs_vlan;
-
- struct NetRxPkt *rx_pkt;
-
- bool tx_sop;
- bool skip_current_tx_pkt;
-
- uint32_t device_active;
- uint32_t last_command;
-
- uint32_t link_status_and_speed;
-
- Vmxnet3IntState interrupt_states[VMXNET3_MAX_INTRS];
-
- uint32_t temp_mac; /* To store the low part first */
-
- MACAddr perm_mac;
- uint32_t vlan_table[VMXNET3_VFT_SIZE];
- uint32_t rx_mode;
- MACAddr *mcast_list;
- uint32_t mcast_list_len;
- uint32_t mcast_list_buff_size; /* needed for live migration. */
-
- /* Compatibility flags for migration */
- uint32_t compat_flags;
-} VMXNET3State;
-
/* Interrupt management */
/*
diff --git a/hw/net/vmxnet3_defs.h b/hw/net/vmxnet3_defs.h
new file mode 100644
index 0000000000..6c19d29b12
--- /dev/null
+++ b/hw/net/vmxnet3_defs.h
@@ -0,0 +1,133 @@
+/*
+ * QEMU VMWARE VMXNET3 paravirtual NIC
+ *
+ * Copyright (c) 2012 Ravello Systems LTD (http://ravellosystems.com)
+ *
+ * Developed by Daynix Computing LTD (http://www.daynix.com)
+ *
+ * Authors:
+ * Dmitry Fleytman <dmitry@daynix.com>
+ * Tamir Shomer <tamirs@daynix.com>
+ * Yan Vugenfirer <yan@daynix.com>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2.
+ * See the COPYING file in the top-level directory.
+ *
+ */
+
+#include "net/net.h"
+#include "hw/net/vmxnet3.h"
+
+#define TYPE_VMXNET3 "vmxnet3"
+#define VMXNET3(obj) OBJECT_CHECK(VMXNET3State, (obj), TYPE_VMXNET3)
+
+/* Device state and helper functions */
+#define VMXNET3_RX_RINGS_PER_QUEUE (2)
+
+/* Cyclic ring abstraction */
+typedef struct {
+ hwaddr pa;
+ uint32_t size;
+ uint32_t cell_size;
+ uint32_t next;
+ uint8_t gen;
+} Vmxnet3Ring;
+
+typedef struct {
+ Vmxnet3Ring tx_ring;
+ Vmxnet3Ring comp_ring;
+
+ uint8_t intr_idx;
+ hwaddr tx_stats_pa;
+ struct UPT1_TxStats txq_stats;
+} Vmxnet3TxqDescr;
+
+typedef struct {
+ Vmxnet3Ring rx_ring[VMXNET3_RX_RINGS_PER_QUEUE];
+ Vmxnet3Ring comp_ring;
+ uint8_t intr_idx;
+ hwaddr rx_stats_pa;
+ struct UPT1_RxStats rxq_stats;
+} Vmxnet3RxqDescr;
+
+typedef struct {
+ bool is_masked;
+ bool is_pending;
+ bool is_asserted;
+} Vmxnet3IntState;
+
+typedef struct {
+ PCIDevice parent_obj;
+ NICState *nic;
+ NICConf conf;
+ MemoryRegion bar0;
+ MemoryRegion bar1;
+ MemoryRegion msix_bar;
+
+ Vmxnet3RxqDescr rxq_descr[VMXNET3_DEVICE_MAX_RX_QUEUES];
+ Vmxnet3TxqDescr txq_descr[VMXNET3_DEVICE_MAX_TX_QUEUES];
+
+ /* Whether MSI-X support was installed successfully */
+ bool msix_used;
+ hwaddr drv_shmem;
+ hwaddr temp_shared_guest_driver_memory;
+
+ uint8_t txq_num;
+
+ /* This boolean tells whether RX packet being indicated has to */
+ /* be split into head and body chunks from different RX rings */
+ bool rx_packets_compound;
+
+ bool rx_vlan_stripping;
+ bool lro_supported;
+
+ uint8_t rxq_num;
+
+ /* Network MTU */
+ uint32_t mtu;
+
+ /* Maximum number of fragments for indicated TX packets */
+ uint32_t max_tx_frags;
+
+ /* Maximum number of fragments for indicated RX packets */
+ uint16_t max_rx_frags;
+
+ /* Index for events interrupt */
+ uint8_t event_int_idx;
+
+ /* Whether automatic interrupts masking enabled */
+ bool auto_int_masking;
+
+ bool peer_has_vhdr;
+
+ /* TX packets to QEMU interface */
+ struct NetTxPkt *tx_pkt;
+ uint32_t offload_mode;
+ uint32_t cso_or_gso_size;
+ uint16_t tci;
+ bool needs_vlan;
+
+ struct NetRxPkt *rx_pkt;
+
+ bool tx_sop;
+ bool skip_current_tx_pkt;
+
+ uint32_t device_active;
+ uint32_t last_command;
+
+ uint32_t link_status_and_speed;
+
+ Vmxnet3IntState interrupt_states[VMXNET3_MAX_INTRS];
+
+ uint32_t temp_mac; /* To store the low part first */
+
+ MACAddr perm_mac;
+ uint32_t vlan_table[VMXNET3_VFT_SIZE];
+ uint32_t rx_mode;
+ MACAddr *mcast_list;
+ uint32_t mcast_list_len;
+ uint32_t mcast_list_buff_size; /* needed for live migration. */
+
+ /* Compatibility flags for migration */
+ uint32_t compat_flags;
+} VMXNET3State;
--
2.17.2
next prev parent reply other threads:[~2018-11-05 12:46 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-05 12:45 [Qemu-devel] [PATCH 00/18] Add support for RDMA MAD Yuval Shaia
2018-11-05 12:45 ` [Qemu-devel] [PATCH 01/18] contrib/rdmacm-mux: Add implementation of RDMA User MAD multiplexer Yuval Shaia
2018-11-05 12:45 ` [Qemu-devel] [PATCH 02/18] hw/rdma: Add ability to force notification without re-arm Yuval Shaia
2018-11-05 12:45 ` [Qemu-devel] [PATCH 03/18] hw/rdma: Return qpn 1 if ibqp is NULL Yuval Shaia
2018-11-05 12:45 ` [Qemu-devel] [PATCH 04/18] hw/rdma: Abort send-op if fail to create addr handler Yuval Shaia
2018-11-05 12:45 ` [Qemu-devel] [PATCH 05/18] hw/rdma: Add support for MAD packets Yuval Shaia
2018-11-05 12:45 ` [Qemu-devel] [PATCH 06/18] hw/pvrdma: Make function reset_device return void Yuval Shaia
2018-11-05 12:45 ` [Qemu-devel] [PATCH 07/18] hw/pvrdma: Make default pkey 0xFFFF Yuval Shaia
2018-11-05 12:45 ` [Qemu-devel] [PATCH 08/18] hw/pvrdma: Set the correct opcode for recv completion Yuval Shaia
2018-11-05 12:45 ` [Qemu-devel] [PATCH 09/18] hw/pvrdma: Set the correct opcode for send completion Yuval Shaia
2018-11-05 12:45 ` [Qemu-devel] [PATCH 10/18] json: Define new QMP message for pvrdma Yuval Shaia
2018-11-05 15:58 ` Eric Blake
2018-11-06 9:49 ` Yuval Shaia
2018-11-07 8:11 ` Yuval Shaia
2018-11-05 12:45 ` [Qemu-devel] [PATCH 11/18] hw/pvrdma: Add support to allow guest to configure GID table Yuval Shaia
2018-11-05 12:45 ` Yuval Shaia [this message]
2018-11-05 12:45 ` [Qemu-devel] [PATCH 13/18] hw/pvrdma: Make sure PCI function 0 is vmxnet3 Yuval Shaia
2018-11-05 12:45 ` [Qemu-devel] [PATCH 14/18] hw/rdma: Initialize node_guid from vmxnet3 mac address Yuval Shaia
2018-11-05 12:45 ` [Qemu-devel] [PATCH 15/18] hw/pvrdma: Make device state depend on Ethernet function state Yuval Shaia
2018-11-05 12:45 ` [Qemu-devel] [PATCH 16/18] hw/pvrdma: Fill all CQE fields Yuval Shaia
2018-11-05 12:45 ` [Qemu-devel] [PATCH 17/18] hw/pvrdma: Fill error code in command's response Yuval Shaia
2018-11-05 12:45 ` [Qemu-devel] [PATCH 18/18] hw/rdma: Remove unneeded code that handles more that one port Yuval Shaia
2018-11-05 17:20 ` [Qemu-devel] [PATCH 00/18] Add support for RDMA MAD no-reply
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181105124559.21561-13-yuval.shaia@oracle.com \
--to=yuval.shaia@oracle.com \
--cc=armbru@redhat.com \
--cc=dmitry.fleytman@gmail.com \
--cc=eblake@redhat.com \
--cc=jasowang@redhat.com \
--cc=marcel.apfelbaum@gmail.com \
--cc=qemu-devel@nongnu.org \
--cc=shamir.rabinovitch@oracle.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).