qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: "Michael S. Tsirkin" <mst@redhat.com>
To: qemu-devel@nongnu.org
Cc: Peter Maydell <peter.maydell@linaro.org>,
	Laszlo Ersek <lersek@redhat.com>,
	Alex Williamson <alex.williamson@redhat.com>,
	Gerd Hoffmann <kraxel@redhat.com>,
	Igor Mammedov <imammedo@redhat.com>,
	Marcel Apfelbaum <marcel.apfelbaum@gmail.com>,
	Paolo Bonzini <pbonzini@redhat.com>,
	Thomas Huth <thuth@redhat.com>,
	Laurent Vivier <lvivier@redhat.com>
Subject: [Qemu-devel] [PULL 25/33] tests/bios-tables-test: add 64-bit PCI MMIO aperture round-up test on Q35
Date: Mon, 5 Nov 2018 13:16:55 -0500	[thread overview]
Message-ID: <20181105181353.39804-26-mst@redhat.com> (raw)
In-Reply-To: <20181105181353.39804-1-mst@redhat.com>

From: Laszlo Ersek <lersek@redhat.com>

In commit 9fa99d2519cb ("hw/pci-host: Fix x86 Host Bridges 64bit PCI
hole", 2017-11-16), we meant to expose such a 64-bit PCI MMIO aperture in
the ACPI DSDT that would be at least as large as the new "pci-hole64-size"
property (2GB on i440fx, 32GB on q35). The goal was to offer "enough"
64-bit MMIO aperture to the guest OS for hotplug purposes.

Previous patch fixed the issue that the aperture is extended relative to
a possibly incorrect base.  This may result in an aperture size that is
smaller than the intent of commit 9fa99d2519cb.

This patch adds a test to make sure it won't happen again.

In the test case being added:
- use 128 MB initial RAM size,
- ask for one DIMM hotplug slot,
- ask for 2 GB maximum RAM size,
- use a pci-testdev with a 64-bit BAR of 2 GB size.

Consequences:

(1) In pc_memory_init() [hw/i386/pc.c], the DIMM hotplug area size is
    initially set to 2048-128 = 1920 MB. (Maximum RAM size minus initial
    RAM size.)

(2) The DIMM area base is set to 4096 MB (because the initial RAM is only
    128 MB -- there is no initial "high RAM").

(3) Due to commit 085f8e88ba73 ("pc: count in 1Gb hugepage alignment when
    sizing hotplug-memory container", 2014-11-24), we add 1 GB for the one
    DIMM hotplug slot that was specified. This sets the DIMM area size to
    1920+1024 = 2944 MB.

(4) The reserved-memory-end address (exclusive) is set to 4096 + 2944 =
    7040 MB (DIMM area base plus DIMM area size).

(5) The reserved-memory-end address is rounded up to GB alignment,
    yielding 7 GB (7168 MB).

(6) Given the 2 GB BAR size of pci-testdev, SeaBIOS allocates said 64-bit
    BAR in 64-bit address space.

(7) Because reserved-memory-end is at 7 GB, it is unaligned for the 2 GB
    BAR. Therefore SeaBIOS allocates the BAR at 8 GB. QEMU then
    (correctly) assigns the root bridge aperture base this BAR address, to
    be exposed in \_SB.PCI0._CRS.

(8) The intent of commit 9fa99d2519cb dictates that QEMU extend the
    aperture size to 32 GB, implying a 40 GB end address. However, QEMU
    performs the extension relative to reserved-memory-end (7 GB), not
    relative to the bridge aperture base that was correctly deduced from
    SeaBIOS's BAR programming (8 GB). Therefore we see 39 GB as the
    aperture end address in \_SB.PCI0._CRS:

> QWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite,
>     0x0000000000000000, // Granularity
>     0x0000000200000000, // Range Minimum
>     0x00000009BFFFFFFF, // Range Maximum
>     0x0000000000000000, // Translation Offset
>     0x00000007C0000000, // Length
>     ,, , AddressRangeMemory, TypeStatic)

Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
 tests/bios-tables-test.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/tests/bios-tables-test.c b/tests/bios-tables-test.c
index b14c8eaa17..d661d9be62 100644
--- a/tests/bios-tables-test.c
+++ b/tests/bios-tables-test.c
@@ -708,6 +708,21 @@ static void test_acpi_q35_tcg_bridge(void)
     free_test_data(&data);
 }
 
+static void test_acpi_q35_tcg_mmio64(void)
+{
+    test_data data = {
+        .machine = MACHINE_Q35,
+        .variant = ".mmio64",
+        .required_struct_types = base_required_struct_types,
+        .required_struct_types_len = ARRAY_SIZE(base_required_struct_types)
+    };
+
+    test_acpi_one("-m 128M,slots=1,maxmem=2G "
+                  "-device pci-testdev,membar=2G",
+                  &data);
+    free_test_data(&data);
+}
+
 static void test_acpi_piix4_tcg_cphp(void)
 {
     test_data data;
@@ -875,6 +890,7 @@ int main(int argc, char *argv[])
         qtest_add_func("acpi/piix4/bridge", test_acpi_piix4_tcg_bridge);
         qtest_add_func("acpi/q35", test_acpi_q35_tcg);
         qtest_add_func("acpi/q35/bridge", test_acpi_q35_tcg_bridge);
+        qtest_add_func("acpi/q35/mmio64", test_acpi_q35_tcg_mmio64);
         qtest_add_func("acpi/piix4/ipmi", test_acpi_piix4_tcg_ipmi);
         qtest_add_func("acpi/q35/ipmi", test_acpi_q35_tcg_ipmi);
         qtest_add_func("acpi/piix4/cpuhp", test_acpi_piix4_tcg_cphp);
-- 
MST

  parent reply	other threads:[~2018-11-05 18:17 UTC|newest]

Thread overview: 53+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-11-05 18:14 [Qemu-devel] [PULL 00/33] pci, pc, virtio: fixes, features Michael S. Tsirkin
2018-11-05 18:14 ` [Qemu-devel] [PULL 01/33] tests: Move tests/acpi-test-data/ to tests/data/acpi/ Michael S. Tsirkin
2018-11-06 13:27   ` Philippe Mathieu-Daudé
2018-11-05 18:14 ` [Qemu-devel] [PULL 02/33] tests: Move tests/hex-loader-check-data/ to tests/data/hex-loader/ Michael S. Tsirkin
2018-11-06 13:27   ` Philippe Mathieu-Daudé
2018-11-06 14:13     ` Michael S. Tsirkin
2018-11-06 15:15       ` Philippe Mathieu-Daudé
2018-11-06 15:31         ` Peter Maydell
2018-11-06 16:02           ` Michael S. Tsirkin
2018-11-06 16:08         ` Michael S. Tsirkin
2018-11-06 16:16         ` Laurent Vivier
2018-11-08 10:24           ` Stefan Hajnoczi
2018-11-08 14:30             ` Laurent Vivier
2018-11-08 15:15               ` Philippe Mathieu-Daudé
2018-11-05 18:14 ` [Qemu-devel] [PULL 03/33] configure: Rename FILES variable to LINKS Michael S. Tsirkin
2018-11-06 13:27   ` Philippe Mathieu-Daudé
2018-11-05 18:14 ` [Qemu-devel] [PULL 04/33] configure: Use LINKS loop for all build tree symlinks Michael S. Tsirkin
2018-11-05 18:15 ` [Qemu-devel] [PULL 05/33] virtio-blk: fix comment for virtio_blk_rw_complete Michael S. Tsirkin
2018-11-06  3:17   ` Dongli Zhang
2018-11-06  3:44     ` Michael S. Tsirkin
2018-11-05 18:15 ` [Qemu-devel] [PULL 06/33] intel_iommu: introduce vtd_reset_caches() Michael S. Tsirkin
2018-11-05 18:15 ` [Qemu-devel] [PULL 07/33] intel_iommu: better handling of dmar state switch Michael S. Tsirkin
2018-11-05 18:15 ` [Qemu-devel] [PULL 08/33] intel_iommu: move ce fetching out when sync shadow Michael S. Tsirkin
2018-11-05 18:16 ` [Qemu-devel] [PULL 09/33] intel_iommu: handle invalid ce for shadow sync Michael S. Tsirkin
2018-11-05 18:16 ` [Qemu-devel] [PULL 10/33] vhost-user-blk: start vhost when guest kicks Michael S. Tsirkin
2018-11-05 18:16 ` [Qemu-devel] [PULL 11/33] x86_iommu: move the kernel-irqchip check in common code Michael S. Tsirkin
2018-11-05 18:16 ` [Qemu-devel] [PULL 12/33] x86_iommu: move vtd_generate_msi_message in common file Michael S. Tsirkin
2018-11-05 18:16 ` [Qemu-devel] [PULL 13/33] x86_iommu/amd: remove V=1 check from amdvi_validate_dte() Michael S. Tsirkin
2018-11-05 18:16 ` [Qemu-devel] [PULL 14/33] x86_iommu/amd: make the address space naming consistent with intel-iommu Michael S. Tsirkin
2018-11-05 18:16 ` [Qemu-devel] [PULL 15/33] x86_iommu/amd: Prepare for interrupt remap support Michael S. Tsirkin
2018-11-05 18:16 ` [Qemu-devel] [PULL 16/33] x86_iommu/amd: Add interrupt remap support when VAPIC is not enabled Michael S. Tsirkin
2018-11-05 18:16 ` [Qemu-devel] [PULL 17/33] i386: acpi: add IVHD device entry for IOAPIC Michael S. Tsirkin
2018-11-05 18:16 ` [Qemu-devel] [PULL 18/33] x86_iommu/amd: Add interrupt remap support when VAPIC is enabled Michael S. Tsirkin
2018-11-05 18:16 ` [Qemu-devel] [PULL 19/33] x86_iommu/amd: Enable Guest virtual APIC support Michael S. Tsirkin
2018-11-05 18:16 ` [Qemu-devel] [PULL 20/33] MAINTAINERS: list "tests/acpi-test-data" files in ACPI/SMBIOS section Michael S. Tsirkin
2018-11-05 18:16 ` [Qemu-devel] [PULL 21/33] pci-testdev: add optional memory bar Michael S. Tsirkin
2018-11-05 18:16 ` [Qemu-devel] [PULL 22/33] hw/pci-host/x86: extract get_pci_hole64_start_value() helpers Michael S. Tsirkin
2018-11-05 18:16 ` [Qemu-devel] [PULL 23/33] hw/pci-host/x86: extend the 64-bit PCI hole relative to the fw-assigned base Michael S. Tsirkin
2018-11-05 18:16 ` [Qemu-devel] [PULL 24/33] bios-tables-test: prepare expected files for mmio64 Michael S. Tsirkin
2018-11-05 18:16 ` Michael S. Tsirkin [this message]
2018-11-05 18:16 ` [Qemu-devel] [PULL 26/33] hw/pci-bridge/xio3130: Remove unused functions Michael S. Tsirkin
2018-11-05 18:16 ` [Qemu-devel] [PULL 27/33] hw/pci-bridge/ioh3420: Remove unuseful header Michael S. Tsirkin
2018-11-05 18:17 ` [Qemu-devel] [PULL 28/33] hw/pci: Add missing include Michael S. Tsirkin
2018-11-05 18:17 ` [Qemu-devel] [PULL 29/33] pci_bridge: fix typo in comment Michael S. Tsirkin
2018-11-05 18:17 ` [Qemu-devel] [PULL 30/33] i440fx: use ARRAY_SIZE for pam_regions Michael S. Tsirkin
2018-11-05 18:17 ` [Qemu-devel] [PULL 31/33] piix: use TYPE_FOO constants than string constats Michael S. Tsirkin
2018-11-05 18:17 ` [Qemu-devel] [PULL 32/33] piix_pci: fix i440fx data sheet link Michael S. Tsirkin
2018-11-05 18:17 ` [Qemu-devel] [PULL 33/33] vhost-scsi: prevent using uninitialized vqs Michael S. Tsirkin
2018-11-06  8:18 ` [Qemu-devel] [PULL 00/33] pci, pc, virtio: fixes, features Thomas Huth
2018-11-06 11:07   ` Michael S. Tsirkin
2018-11-06 11:20     ` Peter Maydell
2018-11-06 12:39       ` Peter Maydell
2018-11-06 15:52         ` Laszlo Ersek

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181105181353.39804-26-mst@redhat.com \
    --to=mst@redhat.com \
    --cc=alex.williamson@redhat.com \
    --cc=imammedo@redhat.com \
    --cc=kraxel@redhat.com \
    --cc=lersek@redhat.com \
    --cc=lvivier@redhat.com \
    --cc=marcel.apfelbaum@gmail.com \
    --cc=pbonzini@redhat.com \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    --cc=thuth@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).