From: minyard@acm.org
To: qemu-devel@nongnu.org
Cc: Paolo Bonzini <pbonzini@redhat.com>,
"Michael S . Tsirkin" <mst@redhat.com>,
"Dr . David Alan Gilbert" <dgilbert@redhat.com>,
Corey Minyard <cminyard@mvista.com>
Subject: [Qemu-devel] [PATCH 2/3] i2c: Add an SMBus vmstate structure
Date: Wed, 7 Nov 2018 09:54:04 -0600 [thread overview]
Message-ID: <20181107155405.24013-3-minyard@acm.org> (raw)
In-Reply-To: <20181107155405.24013-1-minyard@acm.org>
From: Corey Minyard <cminyard@mvista.com>
There is no vmstate handling for SMBus, so no device sitting on SMBus
can have a state transfer that works reliable. So add it.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
---
hw/i2c/smbus.c | 14 ++++++++++++++
include/hw/i2c/smbus.h | 18 +++++++++++++++---
2 files changed, 29 insertions(+), 3 deletions(-)
diff --git a/hw/i2c/smbus.c b/hw/i2c/smbus.c
index 6ff77c582f..b0774d7683 100644
--- a/hw/i2c/smbus.c
+++ b/hw/i2c/smbus.c
@@ -349,6 +349,20 @@ int smbus_write_block(I2CBus *bus, uint8_t addr, uint8_t command, uint8_t *data,
return 0;
}
+const VMStateDescription vmstate_smbus_device = {
+ .name = TYPE_SMBUS_DEVICE,
+ .version_id = 1,
+ .minimum_version_id = 1,
+ .fields = (VMStateField[]) {
+ VMSTATE_I2C_SLAVE(i2c, SMBusDevice),
+ VMSTATE_INT32(mode, SMBusDevice),
+ VMSTATE_INT32(data_len, SMBusDevice),
+ VMSTATE_UINT8_ARRAY(data_buf, SMBusDevice, SMBUS_DATA_MAX_LEN),
+ VMSTATE_UINT8(command, SMBusDevice),
+ VMSTATE_END_OF_LIST()
+ }
+};
+
static void smbus_device_class_init(ObjectClass *klass, void *data)
{
I2CSlaveClass *sc = I2C_SLAVE_CLASS(klass);
diff --git a/include/hw/i2c/smbus.h b/include/hw/i2c/smbus.h
index d8b1b9ee81..7b52020121 100644
--- a/include/hw/i2c/smbus.h
+++ b/include/hw/i2c/smbus.h
@@ -53,14 +53,16 @@ typedef struct SMBusDeviceClass
uint8_t (*read_data)(SMBusDevice *dev, uint8_t cmd, int n);
} SMBusDeviceClass;
+#define SMBUS_DATA_MAX_LEN 34 /* command + len + 32 bytes of data. */
+
struct SMBusDevice {
/* The SMBus protocol is implemented on top of I2C. */
I2CSlave i2c;
/* Remaining fields for internal use only. */
- int mode;
- int data_len;
- uint8_t data_buf[34]; /* command + len + 32 bytes of data. */
+ int32_t mode;
+ int32_t data_len;
+ uint8_t data_buf[SMBUS_DATA_MAX_LEN];
uint8_t command;
};
@@ -93,4 +95,14 @@ void smbus_eeprom_init_one(I2CBus *smbus, uint8_t address, uint8_t *eeprom_buf);
void smbus_eeprom_init(I2CBus *smbus, int nb_eeprom,
const uint8_t *eeprom_spd, int size);
+extern const VMStateDescription vmstate_smbus_device;
+
+#define VMSTATE_SMBUS_DEVICE(_field, _state) { \
+ .name = (stringify(_field)), \
+ .size = sizeof(SMBusDevice), \
+ .vmsd = &vmstate_smbus_device, \
+ .flags = VMS_STRUCT, \
+ .offset = vmstate_offset_value(_state, _field, SMBusDevice), \
+}
+
#endif
--
2.17.1
next prev parent reply other threads:[~2018-11-07 15:54 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-07 15:54 [Qemu-devel] [PATCH 0/3] Fix/add vmstate handling in some I2C code minyard
2018-11-07 15:54 ` [Qemu-devel] [PATCH 1/3] i2c:pm_smbus: Fix state transfer minyard
2018-11-12 17:47 ` Dr. David Alan Gilbert
2018-11-12 20:32 ` Corey Minyard
2018-11-07 15:54 ` minyard [this message]
2018-11-08 14:23 ` [Qemu-devel] [PATCH 2/3] i2c: Add an SMBus vmstate structure Philippe Mathieu-Daudé
2018-11-08 14:40 ` Peter Maydell
2018-11-08 14:48 ` Philippe Mathieu-Daudé
2018-11-07 15:54 ` [Qemu-devel] [PATCH 3/3] i2c: Add vmstate handling to the smbus eeprom minyard
2018-11-08 14:08 ` Peter Maydell
2018-11-08 17:58 ` Corey Minyard
2018-11-08 18:03 ` Peter Maydell
2018-11-09 14:56 ` Corey Minyard
2018-11-09 15:02 ` Peter Maydell
2018-11-09 17:19 ` Corey Minyard
2018-11-09 17:53 ` Peter Maydell
2018-11-12 17:38 ` Dr. David Alan Gilbert
2018-11-12 17:41 ` Peter Maydell
2018-11-12 17:28 ` Dr. David Alan Gilbert
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181107155405.24013-3-minyard@acm.org \
--to=minyard@acm.org \
--cc=cminyard@mvista.com \
--cc=dgilbert@redhat.com \
--cc=mst@redhat.com \
--cc=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).