From: Yuval Shaia <yuval.shaia@oracle.com>
To: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Cc: dmitry.fleytman@gmail.com, jasowang@redhat.com,
eblake@redhat.com, armbru@redhat.com, pbonzini@redhat.com,
qemu-devel@nongnu.org, shamir.rabinovitch@oracle.com,
cohuck@redhat.com, yuval.shaia@oracle.com
Subject: Re: [Qemu-devel] [PATCH v3 17/23] hw/pvrdma: Fill error code in command's response
Date: Sun, 18 Nov 2018 10:24:47 +0200 [thread overview]
Message-ID: <20181118082446.GC3638@lap1> (raw)
In-Reply-To: <0770c06d-b482-c0bf-0d6a-efe31984b31e@gmail.com>
On Sat, Nov 17, 2018 at 02:22:31PM +0200, Marcel Apfelbaum wrote:
>
>
> On 11/13/18 9:13 AM, Yuval Shaia wrote:
> > Driver checks error code let's set it.
> >
> > Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
> > ---
> > hw/rdma/vmw/pvrdma_cmd.c | 67 ++++++++++++++++++++++++++++------------
> > 1 file changed, 48 insertions(+), 19 deletions(-)
> >
> > diff --git a/hw/rdma/vmw/pvrdma_cmd.c b/hw/rdma/vmw/pvrdma_cmd.c
> > index 0d3c818c20..a326c5d470 100644
> > --- a/hw/rdma/vmw/pvrdma_cmd.c
> > +++ b/hw/rdma/vmw/pvrdma_cmd.c
> > @@ -131,7 +131,8 @@ static int query_port(PVRDMADev *dev, union pvrdma_cmd_req *req,
> > if (rdma_backend_query_port(&dev->backend_dev,
> > (struct ibv_port_attr *)&attrs)) {
> > - return -ENOMEM;
> > + resp->hdr.err = -ENOMEM;
> > + goto out;
> > }
> > memset(resp, 0, sizeof(*resp));
> > @@ -150,7 +151,9 @@ static int query_port(PVRDMADev *dev, union pvrdma_cmd_req *req,
> > resp->attrs.active_width = 1;
> > resp->attrs.active_speed = 1;
> > - return 0;
> > +out:
> > + pr_dbg("ret=%d\n", resp->hdr.err);
> > + return resp->hdr.err;
> > }
> > static int query_pkey(PVRDMADev *dev, union pvrdma_cmd_req *req,
> > @@ -170,7 +173,7 @@ static int query_pkey(PVRDMADev *dev, union pvrdma_cmd_req *req,
> > resp->pkey = PVRDMA_PKEY;
> > pr_dbg("pkey=0x%x\n", resp->pkey);
> > - return 0;
> > + return resp->hdr.err;
> > }
> > static int create_pd(PVRDMADev *dev, union pvrdma_cmd_req *req,
> > @@ -200,7 +203,9 @@ static int destroy_pd(PVRDMADev *dev, union pvrdma_cmd_req *req,
> > rdma_rm_dealloc_pd(&dev->rdma_dev_res, cmd->pd_handle);
> > - return 0;
> > + rsp->hdr.err = 0;
>
> Is it possible to ensure err is 0 by default during hdr creation
> instead of manually setting it every time?
Yes we can but since these handlers any fills some other fields in the
response i thought it will be clean if they will fill the op-status as
well.
I believe filling it at "handler" level is more modular.
Do you think filling it outside will make the code cleaner?
>
> Thanks,
> Marcel
>
> > +
> > + return rsp->hdr.err;
> > }
> > static int create_mr(PVRDMADev *dev, union pvrdma_cmd_req *req,
> > @@ -251,7 +256,9 @@ static int destroy_mr(PVRDMADev *dev, union pvrdma_cmd_req *req,
> > rdma_rm_dealloc_mr(&dev->rdma_dev_res, cmd->mr_handle);
> > - return 0;
> > + rsp->hdr.err = 0;
> > +
> > + return rsp->hdr.err;
> > }
> > static int create_cq_ring(PCIDevice *pci_dev , PvrdmaRing **ring,
> > @@ -353,7 +360,8 @@ static int destroy_cq(PVRDMADev *dev, union pvrdma_cmd_req *req,
> > cq = rdma_rm_get_cq(&dev->rdma_dev_res, cmd->cq_handle);
> > if (!cq) {
> > pr_dbg("Invalid CQ handle\n");
> > - return -EINVAL;
> > + rsp->hdr.err = -EINVAL;
> > + goto out;
> > }
> > ring = (PvrdmaRing *)cq->opaque;
> > @@ -364,7 +372,11 @@ static int destroy_cq(PVRDMADev *dev, union pvrdma_cmd_req *req,
> > rdma_rm_dealloc_cq(&dev->rdma_dev_res, cmd->cq_handle);
> > - return 0;
> > + rsp->hdr.err = 0;
> > +
> > +out:
> > + pr_dbg("ret=%d\n", rsp->hdr.err);
> > + return rsp->hdr.err;
> > }
> > static int create_qp_rings(PCIDevice *pci_dev, uint64_t pdir_dma,
> > @@ -553,7 +565,8 @@ static int destroy_qp(PVRDMADev *dev, union pvrdma_cmd_req *req,
> > qp = rdma_rm_get_qp(&dev->rdma_dev_res, cmd->qp_handle);
> > if (!qp) {
> > pr_dbg("Invalid QP handle\n");
> > - return -EINVAL;
> > + rsp->hdr.err = -EINVAL;
> > + goto out;
> > }
> > rdma_rm_dealloc_qp(&dev->rdma_dev_res, cmd->qp_handle);
> > @@ -567,7 +580,11 @@ static int destroy_qp(PVRDMADev *dev, union pvrdma_cmd_req *req,
> > rdma_pci_dma_unmap(PCI_DEVICE(dev), ring->ring_state, TARGET_PAGE_SIZE);
> > g_free(ring);
> > - return 0;
> > + rsp->hdr.err = 0;
> > +
> > +out:
> > + pr_dbg("ret=%d\n", rsp->hdr.err);
> > + return rsp->hdr.err;
> > }
> > static int create_bind(PVRDMADev *dev, union pvrdma_cmd_req *req,
> > @@ -580,7 +597,8 @@ static int create_bind(PVRDMADev *dev, union pvrdma_cmd_req *req,
> > pr_dbg("index=%d\n", cmd->index);
> > if (cmd->index >= MAX_PORT_GIDS) {
> > - return -EINVAL;
> > + rsp->hdr.err = -EINVAL;
> > + goto out;
> > }
> > pr_dbg("gid[%d]=0x%llx,0x%llx\n", cmd->index,
> > @@ -590,10 +608,15 @@ static int create_bind(PVRDMADev *dev, union pvrdma_cmd_req *req,
> > rc = rdma_rm_add_gid(&dev->rdma_dev_res, &dev->backend_dev,
> > dev->backend_eth_device_name, gid, cmd->index);
> > if (rc < 0) {
> > - return -EINVAL;
> > + rsp->hdr.err = rc;
> > + goto out;
> > }
> > - return 0;
> > + rsp->hdr.err = 0;
> > +
> > +out:
> > + pr_dbg("ret=%d\n", rsp->hdr.err);
> > + return rsp->hdr.err;
> > }
> > static int destroy_bind(PVRDMADev *dev, union pvrdma_cmd_req *req,
> > @@ -606,7 +629,8 @@ static int destroy_bind(PVRDMADev *dev, union pvrdma_cmd_req *req,
> > pr_dbg("index=%d\n", cmd->index);
> > if (cmd->index >= MAX_PORT_GIDS) {
> > - return -EINVAL;
> > + rsp->hdr.err = -EINVAL;
> > + goto out;
> > }
> > rc = rdma_rm_del_gid(&dev->rdma_dev_res, &dev->backend_dev,
> > @@ -617,7 +641,11 @@ static int destroy_bind(PVRDMADev *dev, union pvrdma_cmd_req *req,
> > goto out;
> > }
> > - return 0;
> > + rsp->hdr.err = 0;
> > +
> > +out:
> > + pr_dbg("ret=%d\n", rsp->hdr.err);
> > + return rsp->hdr.err;
> > }
> > static int create_uc(PVRDMADev *dev, union pvrdma_cmd_req *req,
> > @@ -634,9 +662,8 @@ static int create_uc(PVRDMADev *dev, union pvrdma_cmd_req *req,
> > resp->hdr.err = rdma_rm_alloc_uc(&dev->rdma_dev_res, cmd->pfn,
> > &resp->ctx_handle);
> > - pr_dbg("ret=%d\n", resp->hdr.err);
> > -
> > - return 0;
> > + pr_dbg("ret=%d\n", rsp->hdr.err);
> > + return rsp->hdr.err;
> > }
> > static int destroy_uc(PVRDMADev *dev, union pvrdma_cmd_req *req,
> > @@ -648,7 +675,9 @@ static int destroy_uc(PVRDMADev *dev, union pvrdma_cmd_req *req,
> > rdma_rm_dealloc_uc(&dev->rdma_dev_res, cmd->ctx_handle);
> > - return 0;
> > + rsp->hdr.err = 0;
> > +
> > + return rsp->hdr.err;
> > }
> > struct cmd_handler {
> > uint32_t cmd;
> > @@ -696,7 +725,7 @@ int execute_command(PVRDMADev *dev)
> > }
> > err = cmd_handlers[dsr_info->req->hdr.cmd].exec(dev, dsr_info->req,
> > - dsr_info->rsp);
> > + dsr_info->rsp);
> > out:
> > set_reg_val(dev, PVRDMA_REG_ERR, err);
> > post_interrupt(dev, INTR_VEC_CMD_RING);
>
next prev parent reply other threads:[~2018-11-18 8:25 UTC|newest]
Thread overview: 70+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-13 7:12 [Qemu-devel] [PATCH v3 00/23] Add support for RDMA MAD Yuval Shaia
2018-11-13 7:12 ` [Qemu-devel] [PATCH v3 01/23] contrib/rdmacm-mux: Add implementation of RDMA User MAD multiplexer Yuval Shaia
2018-11-13 7:12 ` [Qemu-devel] [PATCH v3 02/23] hw/rdma: Add ability to force notification without re-arm Yuval Shaia
2018-11-13 7:12 ` [Qemu-devel] [PATCH v3 03/23] hw/rdma: Return qpn 1 if ibqp is NULL Yuval Shaia
2018-11-17 11:42 ` Marcel Apfelbaum
2018-11-13 7:12 ` [Qemu-devel] [PATCH v3 04/23] hw/rdma: Abort send-op if fail to create addr handler Yuval Shaia
2018-11-13 7:12 ` [Qemu-devel] [PATCH v3 05/23] hw/rdma: Add support for MAD packets Yuval Shaia
2018-11-17 12:06 ` Marcel Apfelbaum
2018-11-18 9:33 ` Yuval Shaia
2018-11-13 7:12 ` [Qemu-devel] [PATCH v3 06/23] hw/pvrdma: Make function reset_device return void Yuval Shaia
2018-11-13 7:12 ` [Qemu-devel] [PATCH v3 07/23] hw/pvrdma: Make default pkey 0xFFFF Yuval Shaia
2018-11-13 7:12 ` [Qemu-devel] [PATCH v3 08/23] hw/pvrdma: Set the correct opcode for recv completion Yuval Shaia
2018-11-13 7:12 ` [Qemu-devel] [PATCH v3 09/23] hw/pvrdma: Set the correct opcode for send completion Yuval Shaia
2018-11-17 12:07 ` Marcel Apfelbaum
2018-11-13 7:12 ` [Qemu-devel] [PATCH v3 10/23] json: Define new QMP message for pvrdma Yuval Shaia
2018-11-13 7:13 ` [Qemu-devel] [PATCH v3 11/23] hw/pvrdma: Add support to allow guest to configure GID table Yuval Shaia
2018-11-17 12:48 ` Marcel Apfelbaum
2018-11-18 8:13 ` Yuval Shaia
2018-11-13 7:13 ` [Qemu-devel] [PATCH v3 12/23] vmxnet3: Move some definitions to header file Yuval Shaia
2018-11-13 7:13 ` [Qemu-devel] [PATCH v3 13/23] hw/pvrdma: Make sure PCI function 0 is vmxnet3 Yuval Shaia
2018-11-13 7:13 ` [Qemu-devel] [PATCH v3 14/23] hw/rdma: Initialize node_guid from vmxnet3 mac address Yuval Shaia
2018-11-17 12:10 ` Marcel Apfelbaum
2018-11-13 7:13 ` [Qemu-devel] [PATCH v3 15/23] hw/pvrdma: Make device state depend on Ethernet function state Yuval Shaia
2018-11-17 12:11 ` Marcel Apfelbaum
2018-11-13 7:13 ` [Qemu-devel] [PATCH v3 16/23] hw/pvrdma: Fill all CQE fields Yuval Shaia
2018-11-17 12:19 ` Marcel Apfelbaum
2018-11-13 7:13 ` [Qemu-devel] [PATCH v3 17/23] hw/pvrdma: Fill error code in command's response Yuval Shaia
2018-11-17 12:22 ` Marcel Apfelbaum
2018-11-18 8:24 ` Yuval Shaia [this message]
2018-11-25 7:35 ` Marcel Apfelbaum
2018-11-13 7:13 ` [Qemu-devel] [PATCH v3 18/23] hw/rdma: Remove unneeded code that handles more that one port Yuval Shaia
2018-11-17 12:23 ` Marcel Apfelbaum
2018-11-13 7:13 ` [Qemu-devel] [PATCH v3 19/23] vl: Introduce shutdown_notifiers Yuval Shaia
2018-11-13 9:34 ` Cornelia Huck
2018-11-13 7:13 ` [Qemu-devel] [PATCH v3 20/23] hw/pvrdma: Clean device's resource when system is shutdown Yuval Shaia
2018-11-17 12:24 ` Marcel Apfelbaum
2018-11-13 7:13 ` [Qemu-devel] [PATCH v3 21/23] hw/rdma: Do not use bitmap_zero_extend to free bitmap Yuval Shaia
2018-11-17 12:25 ` Marcel Apfelbaum
2018-11-13 7:13 ` [Qemu-devel] [PATCH v3 22/23] hw/rdma: Do not call rdma_backend_del_gid on an empty gid Yuval Shaia
2018-11-17 12:25 ` Marcel Apfelbaum
2018-11-18 9:42 ` Yuval Shaia
2018-11-13 7:13 ` [Qemu-devel] [PATCH v3 23/23] docs: Update pvrdma device documentation Yuval Shaia
2018-11-17 12:34 ` Marcel Apfelbaum
2018-11-18 7:27 ` Yuval Shaia
2018-11-13 7:13 ` [Qemu-devel] [PATCH v3 00/23] Add support for RDMA MAD Yuval Shaia
2018-11-13 7:13 ` [Qemu-devel] [PATCH v3 01/23] contrib/rdmacm-mux: Add implementation of RDMA User MAD multiplexer Yuval Shaia
2018-11-17 17:27 ` Shamir Rabinovitch
2018-11-18 10:17 ` Yuval Shaia
2018-11-13 7:13 ` [Qemu-devel] [PATCH v3 02/23] hw/rdma: Add ability to force notification without re-arm Yuval Shaia
2018-11-13 7:13 ` [Qemu-devel] [PATCH v3 03/23] hw/rdma: Return qpn 1 if ibqp is NULL Yuval Shaia
2018-11-13 7:13 ` [Qemu-devel] [PATCH v3 04/23] hw/rdma: Abort send-op if fail to create addr handler Yuval Shaia
2018-11-13 7:13 ` [Qemu-devel] [PATCH v3 05/23] hw/rdma: Add support for MAD packets Yuval Shaia
2018-11-13 7:13 ` [Qemu-devel] [PATCH v3 06/23] hw/pvrdma: Make function reset_device return void Yuval Shaia
2018-11-13 7:13 ` [Qemu-devel] [PATCH v3 07/23] hw/pvrdma: Make default pkey 0xFFFF Yuval Shaia
2018-11-13 7:13 ` [Qemu-devel] [PATCH v3 08/23] hw/pvrdma: Set the correct opcode for recv completion Yuval Shaia
2018-11-13 7:13 ` [Qemu-devel] [PATCH v3 09/23] hw/pvrdma: Set the correct opcode for send completion Yuval Shaia
2018-11-13 7:13 ` [Qemu-devel] [PATCH v3 10/23] json: Define new QMP message for pvrdma Yuval Shaia
2018-11-13 7:13 ` [Qemu-devel] [PATCH v3 11/23] hw/pvrdma: Add support to allow guest to configure GID table Yuval Shaia
2018-11-13 7:13 ` [Qemu-devel] [PATCH v3 12/23] vmxnet3: Move some definitions to header file Yuval Shaia
2018-11-13 7:13 ` [Qemu-devel] [PATCH v3 13/23] hw/pvrdma: Make sure PCI function 0 is vmxnet3 Yuval Shaia
2018-11-13 7:13 ` [Qemu-devel] [PATCH v3 14/23] hw/rdma: Initialize node_guid from vmxnet3 mac address Yuval Shaia
2018-11-13 7:13 ` [Qemu-devel] [PATCH v3 15/23] hw/pvrdma: Make device state depend on Ethernet function state Yuval Shaia
2018-11-13 7:13 ` [Qemu-devel] [PATCH v3 16/23] hw/pvrdma: Fill all CQE fields Yuval Shaia
2018-11-13 7:13 ` [Qemu-devel] [PATCH v3 17/23] hw/pvrdma: Fill error code in command's response Yuval Shaia
2018-11-13 7:13 ` [Qemu-devel] [PATCH v3 18/23] hw/rdma: Remove unneeded code that handles more that one port Yuval Shaia
2018-11-13 7:13 ` [Qemu-devel] [PATCH v3 19/23] vl: Introduce shutdown_notifiers Yuval Shaia
2018-11-13 7:13 ` [Qemu-devel] [PATCH v3 20/23] hw/pvrdma: Clean device's resource when system is shutdown Yuval Shaia
2018-11-13 7:13 ` [Qemu-devel] [PATCH v3 21/23] hw/rdma: Do not use bitmap_zero_extend to free bitmap Yuval Shaia
2018-11-13 7:13 ` [Qemu-devel] [PATCH v3 22/23] hw/rdma: Do not call rdma_backend_del_gid on an empty gid Yuval Shaia
2018-11-13 7:13 ` [Qemu-devel] [PATCH v3 23/23] docs: Update pvrdma device documentation Yuval Shaia
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181118082446.GC3638@lap1 \
--to=yuval.shaia@oracle.com \
--cc=armbru@redhat.com \
--cc=cohuck@redhat.com \
--cc=dmitry.fleytman@gmail.com \
--cc=eblake@redhat.com \
--cc=jasowang@redhat.com \
--cc=marcel.apfelbaum@gmail.com \
--cc=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=shamir.rabinovitch@oracle.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).