From: David Gibson <david@gibson.dropbear.id.au>
To: "Cédric Le Goater" <clg@kaod.org>
Cc: qemu-ppc@nongnu.org, qemu-devel@nongnu.org,
Benjamin Herrenschmidt <benh@kernel.crashing.org>
Subject: Re: [Qemu-devel] [PATCH v5 05/36] ppc/xive: introduce the XIVE Event Notification Descriptors
Date: Thu, 22 Nov 2018 15:41:27 +1100 [thread overview]
Message-ID: <20181122044127.GE10448@umbus.fritz.box> (raw)
In-Reply-To: <20181116105729.23240-6-clg@kaod.org>
[-- Attachment #1: Type: text/plain, Size: 14713 bytes --]
On Fri, Nov 16, 2018 at 11:56:58AM +0100, Cédric Le Goater wrote:
> To complete the event routing, the IVRE sub-engine uses an internal
> table containing Event Notification Descriptor (END) structures.
>
> An END specifies on which Event Queue (EQ) the event notification
> data, defined in the associated EAS, should be posted when an
> exception occurs. It also defines which Notification Virtual Target
> (NVT) should be notified.
>
> The Event Queue is a memory page provided by the O/S defining a
> circular buffer, one per server and priority couple, containing Event
> Queue entries. These are 4 bytes long, the first bit being a
> 'generation' bit and the 31 following bits the END Data field. They
> are pulled by the O/S when the exception occurs.
>
> The END Data field is a way to set an invariant logical event source
> number for an IRQ. It is set with the H_INT_SET_SOURCE_CONFIG hcall
> when the EISN flag is used.
>
> Signed-off-by: Cédric Le Goater <clg@kaod.org>
> ---
> include/hw/ppc/xive.h | 18 ++++
> include/hw/ppc/xive_regs.h | 48 ++++++++++
> hw/intc/xive.c | 185 ++++++++++++++++++++++++++++++++++++-
> 3 files changed, 248 insertions(+), 3 deletions(-)
>
> diff --git a/include/hw/ppc/xive.h b/include/hw/ppc/xive.h
> index 5a0696366577..ce62aaf28343 100644
> --- a/include/hw/ppc/xive.h
> +++ b/include/hw/ppc/xive.h
> @@ -193,11 +193,29 @@ typedef struct XiveRouterClass {
> /* XIVE table accessors */
> int (*get_eas)(XiveRouter *xrtr, uint32_t lisn, XiveEAS *eas);
> int (*set_eas)(XiveRouter *xrtr, uint32_t lisn, XiveEAS *eas);
> + int (*get_end)(XiveRouter *xrtr, uint8_t end_blk, uint32_t end_idx,
> + XiveEND *end);
> + int (*set_end)(XiveRouter *xrtr, uint8_t end_blk, uint32_t end_idx,
> + XiveEND *end);
Hrm. So unlike the EAS, which is basically just a word, the END is a
pretty large structure. It's unclear here if get/set are expected to
copy the whole thing out and in, or if get get give you a pointer into
a "live" structure and set just does any necessary barriers after an
update.
Really, for a non-atomic value like this, I'm not sure get/set is the
right model.
Also as I understand it nearly all the indices in XIVE are broken into
block/index. Is there a reason those are folded together into lisn
for the EAS, but not for the END?
> } XiveRouterClass;
>
> void xive_eas_pic_print_info(XiveEAS *eas, uint32_t lisn, Monitor *mon);
>
> int xive_router_get_eas(XiveRouter *xrtr, uint32_t lisn, XiveEAS *eas);
> int xive_router_set_eas(XiveRouter *xrtr, uint32_t lisn, XiveEAS *eas);
> +int xive_router_get_end(XiveRouter *xrtr, uint8_t end_blk, uint32_t end_idx,
> + XiveEND *end);
> +int xive_router_set_end(XiveRouter *xrtr, uint8_t end_blk, uint32_t end_idx,
> + XiveEND *end);
> +
> +/*
> + * For legacy compatibility, the exceptions define up to 256 different
> + * priorities. P9 implements only 9 levels : 8 active levels [0 - 7]
> + * and the least favored level 0xFF.
> + */
> +#define XIVE_PRIORITY_MAX 7
> +
> +void xive_end_reset(XiveEND *end);
> +void xive_end_pic_print_info(XiveEND *end, uint32_t end_idx, Monitor *mon);
>
> #endif /* PPC_XIVE_H */
> diff --git a/include/hw/ppc/xive_regs.h b/include/hw/ppc/xive_regs.h
> index 12499b33614c..f97fb2b90bee 100644
> --- a/include/hw/ppc/xive_regs.h
> +++ b/include/hw/ppc/xive_regs.h
> @@ -28,4 +28,52 @@ typedef struct XiveEAS {
> #define EAS_END_DATA PPC_BITMASK(33, 63) /* Data written to the END */
> } XiveEAS;
>
> +/* Event Notification Descriptor (END) */
> +typedef struct XiveEND {
> + uint32_t w0;
> +#define END_W0_VALID PPC_BIT32(0) /* "v" bit */
> +#define END_W0_ENQUEUE PPC_BIT32(1) /* "q" bit */
> +#define END_W0_UCOND_NOTIFY PPC_BIT32(2) /* "n" bit */
> +#define END_W0_BACKLOG PPC_BIT32(3) /* "b" bit */
> +#define END_W0_PRECL_ESC_CTL PPC_BIT32(4) /* "p" bit */
> +#define END_W0_ESCALATE_CTL PPC_BIT32(5) /* "e" bit */
> +#define END_W0_UNCOND_ESCALATE PPC_BIT32(6) /* "u" bit - DD2.0 */
> +#define END_W0_SILENT_ESCALATE PPC_BIT32(7) /* "s" bit - DD2.0 */
> +#define END_W0_QSIZE PPC_BITMASK32(12, 15)
> +#define END_W0_SW0 PPC_BIT32(16)
> +#define END_W0_FIRMWARE END_W0_SW0 /* Owned by FW */
> +#define END_QSIZE_4K 0
> +#define END_QSIZE_64K 4
> +#define END_W0_HWDEP PPC_BITMASK32(24, 31)
> + uint32_t w1;
> +#define END_W1_ESn PPC_BITMASK32(0, 1)
> +#define END_W1_ESn_P PPC_BIT32(0)
> +#define END_W1_ESn_Q PPC_BIT32(1)
> +#define END_W1_ESe PPC_BITMASK32(2, 3)
> +#define END_W1_ESe_P PPC_BIT32(2)
> +#define END_W1_ESe_Q PPC_BIT32(3)
> +#define END_W1_GENERATION PPC_BIT32(9)
> +#define END_W1_PAGE_OFF PPC_BITMASK32(10, 31)
> + uint32_t w2;
> +#define END_W2_MIGRATION_REG PPC_BITMASK32(0, 3)
> +#define END_W2_OP_DESC_HI PPC_BITMASK32(4, 31)
> + uint32_t w3;
> +#define END_W3_OP_DESC_LO PPC_BITMASK32(0, 31)
> + uint32_t w4;
> +#define END_W4_ESC_END_BLOCK PPC_BITMASK32(4, 7)
> +#define END_W4_ESC_END_INDEX PPC_BITMASK32(8, 31)
> + uint32_t w5;
> +#define END_W5_ESC_END_DATA PPC_BITMASK32(1, 31)
> + uint32_t w6;
> +#define END_W6_FORMAT_BIT PPC_BIT32(8)
> +#define END_W6_NVT_BLOCK PPC_BITMASK32(9, 12)
> +#define END_W6_NVT_INDEX PPC_BITMASK32(13, 31)
> + uint32_t w7;
> +#define END_W7_F0_IGNORE PPC_BIT32(0)
> +#define END_W7_F0_BLK_GROUPING PPC_BIT32(1)
> +#define END_W7_F0_PRIORITY PPC_BITMASK32(8, 15)
> +#define END_W7_F1_WAKEZ PPC_BIT32(0)
> +#define END_W7_F1_LOG_SERVER_ID PPC_BITMASK32(1, 31)
> +} XiveEND;
> +
> #endif /* PPC_XIVE_REGS_H */
> diff --git a/hw/intc/xive.c b/hw/intc/xive.c
> index c4c90a25758e..9cb001e7b540 100644
> --- a/hw/intc/xive.c
> +++ b/hw/intc/xive.c
> @@ -442,6 +442,101 @@ static const TypeInfo xive_source_info = {
> .class_init = xive_source_class_init,
> };
>
> +/*
> + * XiveEND helpers
> + */
> +
> +void xive_end_reset(XiveEND *end)
> +{
> + memset(end, 0, sizeof(*end));
> +
> + /* switch off the escalation and notification ESBs */
> + end->w1 = END_W1_ESe_Q | END_W1_ESn_Q;
It's not obvious to me what circumstances this would be called under.
Since the ENDs are in system memory, a memset() seems like an odd
thing for (virtual) hardware to be doing to it.
> +}
> +
> +static void xive_end_queue_pic_print_info(XiveEND *end, uint32_t width,
> + Monitor *mon)
> +{
> + uint64_t qaddr_base = (((uint64_t)(end->w2 & 0x0fffffff)) << 32) | end->w3;
> + uint32_t qsize = GETFIELD(END_W0_QSIZE, end->w0);
> + uint32_t qindex = GETFIELD(END_W1_PAGE_OFF, end->w1);
> + uint32_t qentries = 1 << (qsize + 10);
> + int i;
> +
> + /*
> + * print out the [ (qindex - (width - 1)) .. (qindex + 1)] window
> + */
> + monitor_printf(mon, " [ ");
> + qindex = (qindex - (width - 1)) & (qentries - 1);
> + for (i = 0; i < width; i++) {
> + uint64_t qaddr = qaddr_base + (qindex << 2);
> + uint32_t qdata = -1;
> +
> + if (dma_memory_read(&address_space_memory, qaddr, &qdata,
> + sizeof(qdata))) {
> + qemu_log_mask(LOG_GUEST_ERROR, "XIVE: failed to read EQ @0x%"
> + HWADDR_PRIx "\n", qaddr);
> + return;
> + }
> + monitor_printf(mon, "%s%08x ", i == width - 1 ? "^" : "",
> + be32_to_cpu(qdata));
> + qindex = (qindex + 1) & (qentries - 1);
> + }
> + monitor_printf(mon, "]\n");
> +}
> +
> +void xive_end_pic_print_info(XiveEND *end, uint32_t end_idx, Monitor *mon)
> +{
> + uint64_t qaddr_base = (((uint64_t)(end->w2 & 0x0fffffff)) << 32) | end->w3;
> + uint32_t qindex = GETFIELD(END_W1_PAGE_OFF, end->w1);
> + uint32_t qgen = GETFIELD(END_W1_GENERATION, end->w1);
> + uint32_t qsize = GETFIELD(END_W0_QSIZE, end->w0);
> + uint32_t qentries = 1 << (qsize + 10);
> +
> + uint32_t nvt = GETFIELD(END_W6_NVT_INDEX, end->w6);
> + uint8_t priority = GETFIELD(END_W7_F0_PRIORITY, end->w7);
> +
> + if (!(end->w0 & END_W0_VALID)) {
> + return;
> + }
> +
> + monitor_printf(mon, " %08x %c%c%c%c%c prio:%d nvt:%04x eq:@%08"PRIx64
> + "% 6d/%5d ^%d", end_idx,
> + end->w0 & END_W0_VALID ? 'v' : '-',
> + end->w0 & END_W0_ENQUEUE ? 'q' : '-',
> + end->w0 & END_W0_UCOND_NOTIFY ? 'n' : '-',
> + end->w0 & END_W0_BACKLOG ? 'b' : '-',
> + end->w0 & END_W0_ESCALATE_CTL ? 'e' : '-',
> + priority, nvt, qaddr_base, qindex, qentries, qgen);
> +
> + xive_end_queue_pic_print_info(end, 6, mon);
> +}
> +
> +static void xive_end_push(XiveEND *end, uint32_t data)
s/push/enqueue/ please, "push" suggests a stack. (Not to mention that
"push" and "pull" are used as terms elsewhere in XIVE).
> +{
> + uint64_t qaddr_base = (((uint64_t)(end->w2 & 0x0fffffff)) << 32) | end->w3;
> + uint32_t qsize = GETFIELD(END_W0_QSIZE, end->w0);
> + uint32_t qindex = GETFIELD(END_W1_PAGE_OFF, end->w1);
> + uint32_t qgen = GETFIELD(END_W1_GENERATION, end->w1);
> +
> + uint64_t qaddr = qaddr_base + (qindex << 2);
> + uint32_t qdata = cpu_to_be32((qgen << 31) | (data & 0x7fffffff));
> + uint32_t qentries = 1 << (qsize + 10);
> +
> + if (dma_memory_write(&address_space_memory, qaddr, &qdata, sizeof(qdata))) {
> + qemu_log_mask(LOG_GUEST_ERROR, "XIVE: failed to write END data @0x%"
> + HWADDR_PRIx "\n", qaddr);
> + return;
> + }
> +
> + qindex = (qindex + 1) & (qentries - 1);
> + if (qindex == 0) {
> + qgen ^= 1;
> + end->w1 = SETFIELD(END_W1_GENERATION, end->w1, qgen);
> + }
> + end->w1 = SETFIELD(END_W1_PAGE_OFF, end->w1, qindex);
> +}
> +
> /*
> * XIVE Router (aka. Virtualization Controller or IVRE)
> */
> @@ -460,6 +555,82 @@ int xive_router_set_eas(XiveRouter *xrtr, uint32_t lisn, XiveEAS *eas)
> return xrc->set_eas(xrtr, lisn, eas);
> }
>
> +int xive_router_get_end(XiveRouter *xrtr, uint8_t end_blk, uint32_t end_idx,
> + XiveEND *end)
> +{
> + XiveRouterClass *xrc = XIVE_ROUTER_GET_CLASS(xrtr);
> +
> + return xrc->get_end(xrtr, end_blk, end_idx, end);
> +}
> +
> +int xive_router_set_end(XiveRouter *xrtr, uint8_t end_blk, uint32_t end_idx,
> + XiveEND *end)
> +{
> + XiveRouterClass *xrc = XIVE_ROUTER_GET_CLASS(xrtr);
> +
> + return xrc->set_end(xrtr, end_blk, end_idx, end);
> +}
> +
> +/*
> + * An END trigger can come from an event trigger (IPI or HW) or from
> + * another chip. We don't model the PowerBus but the END trigger
> + * message has the same parameters than in the function below.
> + */
> +static void xive_router_end_notify(XiveRouter *xrtr, uint8_t end_blk,
> + uint32_t end_idx, uint32_t end_data)
> +{
> + XiveEND end;
> + uint8_t priority;
> + uint8_t format;
> +
> + /* END cache lookup */
> + if (xive_router_get_end(xrtr, end_blk, end_idx, &end)) {
> + qemu_log_mask(LOG_GUEST_ERROR, "XIVE: No END %x/%x\n", end_blk,
> + end_idx);
> + return;
> + }
> +
> + if (!(end.w0 & END_W0_VALID)) {
> + qemu_log_mask(LOG_GUEST_ERROR, "XIVE: END %x/%x is invalid\n",
> + end_blk, end_idx);
> + return;
> + }
> +
> + if (end.w0 & END_W0_ENQUEUE) {
> + xive_end_push(&end, end_data);
> + xive_router_set_end(xrtr, end_blk, end_idx, &end);
> + }
> +
> + /*
> + * The W7 format depends on the F bit in W6. It defines the type
> + * of the notification :
> + *
> + * F=0 : single or multiple NVT notification
> + * F=1 : User level Event-Based Branch (EBB) notification, no
> + * priority
> + */
> + format = GETFIELD(END_W6_FORMAT_BIT, end.w6);
> + priority = GETFIELD(END_W7_F0_PRIORITY, end.w7);
> +
> + /* The END is masked */
> + if (format == 0 && priority == 0xff) {
> + return;
> + }
> +
> + /*
> + * Check the END ESn (Event State Buffer for notification) for
> + * even futher coalescing in the Router
> + */
> + if (!(end.w0 & END_W0_UCOND_NOTIFY)) {
> + qemu_log_mask(LOG_UNIMP, "XIVE: !UCOND_NOTIFY not implemented\n");
> + return;
> + }
> +
> + /*
> + * Follows IVPE notification
> + */
> +}
> +
> static void xive_router_notify(XiveFabric *xf, uint32_t lisn)
> {
> XiveRouter *xrtr = XIVE_ROUTER(xf);
> @@ -471,9 +642,9 @@ static void xive_router_notify(XiveFabric *xf, uint32_t lisn)
> return;
> }
>
> - /* The IVRE has a State Bit Cache for its internal sources which
> - * is also involed at this point. We skip the SBC lookup because
> - * the state bits of the sources are modeled internally in QEMU.
> + /* The IVRE checks the State Bit Cache at this point. We skip the
> + * SBC lookup because the state bits of the sources are modeled
> + * internally in QEMU.
Replacing a comment about something we're not doing with a different
comment about something we're not doing doesn't seem very useful.
Maybe fold these together into one patch or the other.
> */
>
> if (!(eas.w & EAS_VALID)) {
> @@ -485,6 +656,14 @@ static void xive_router_notify(XiveFabric *xf, uint32_t lisn)
> /* Notification completed */
> return;
> }
> +
> + /*
> + * The event trigger becomes an END trigger
> + */
> + xive_router_end_notify(xrtr,
> + GETFIELD(EAS_END_BLOCK, eas.w),
> + GETFIELD(EAS_END_INDEX, eas.w),
> + GETFIELD(EAS_END_DATA, eas.w));
> }
>
> static Property xive_router_properties[] = {
--
David Gibson | I'll have my music baroque, and my code
david AT gibson.dropbear.id.au | minimalist, thank you. NOT _the_ _other_
| _way_ _around_!
http://www.ozlabs.org/~dgibson
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
next prev parent reply other threads:[~2018-11-22 5:10 UTC|newest]
Thread overview: 184+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-16 10:56 [Qemu-devel] [PATCH v5 00/36] ppc: support for the XIVE interrupt controller (POWER9) Cédric Le Goater
2018-11-16 10:56 ` [Qemu-devel] [PATCH v5 01/36] ppc/xive: introduce a XIVE interrupt source model Cédric Le Goater
2018-11-22 3:05 ` David Gibson
2018-11-22 7:25 ` Cédric Le Goater
2018-11-23 0:31 ` David Gibson
2018-11-23 8:21 ` Cédric Le Goater
2018-11-26 8:14 ` Cédric Le Goater
2018-11-16 10:56 ` [Qemu-devel] [PATCH v5 02/36] ppc/xive: add support for the LSI interrupt sources Cédric Le Goater
2018-11-22 3:19 ` David Gibson
2018-11-22 7:39 ` Cédric Le Goater
2018-11-23 1:08 ` David Gibson
2018-11-23 13:28 ` Cédric Le Goater
2018-11-26 5:39 ` David Gibson
2018-11-26 11:20 ` Cédric Le Goater
2018-11-26 23:48 ` David Gibson
2018-11-27 7:30 ` Cédric Le Goater
2018-11-16 10:56 ` [Qemu-devel] [PATCH v5 03/36] ppc/xive: introduce the XiveFabric interface Cédric Le Goater
2018-11-16 10:56 ` [Qemu-devel] [PATCH v5 04/36] ppc/xive: introduce the XiveRouter model Cédric Le Goater
2018-11-22 4:11 ` David Gibson
2018-11-22 7:53 ` Cédric Le Goater
2018-11-23 3:50 ` David Gibson
2018-11-23 8:06 ` Cédric Le Goater
2018-11-27 1:54 ` David Gibson
2018-11-27 8:45 ` Cédric Le Goater
2018-11-22 4:44 ` David Gibson
2018-11-22 6:50 ` Benjamin Herrenschmidt
2018-11-22 7:59 ` Cédric Le Goater
2018-11-23 1:17 ` David Gibson
2018-11-23 1:10 ` David Gibson
2018-11-23 10:28 ` Cédric Le Goater
2018-11-26 5:44 ` David Gibson
2018-11-26 9:39 ` Cédric Le Goater
2018-11-27 0:11 ` David Gibson
2018-11-27 7:30 ` Cédric Le Goater
2018-11-27 22:56 ` David Gibson
2018-11-16 10:56 ` [Qemu-devel] [PATCH v5 05/36] ppc/xive: introduce the XIVE Event Notification Descriptors Cédric Le Goater
2018-11-22 4:41 ` David Gibson [this message]
2018-11-22 6:49 ` Benjamin Herrenschmidt
2018-11-23 3:51 ` David Gibson
2018-11-22 21:47 ` Cédric Le Goater
2018-11-23 4:35 ` David Gibson
2018-11-23 11:01 ` Cédric Le Goater
2018-11-29 4:46 ` David Gibson
2018-11-16 10:56 ` [Qemu-devel] [PATCH v5 06/36] ppc/xive: add support for the END Event State buffers Cédric Le Goater
2018-11-22 5:13 ` David Gibson
2018-11-22 21:58 ` Cédric Le Goater
2018-11-23 4:36 ` David Gibson
2018-11-23 7:28 ` Cédric Le Goater
2018-11-26 5:54 ` David Gibson
2018-11-29 22:06 ` Cédric Le Goater
2018-11-30 1:04 ` David Gibson
2018-11-30 6:41 ` Cédric Le Goater
2018-12-03 1:14 ` David Gibson
2018-12-03 16:19 ` Cédric Le Goater
2018-11-16 10:57 ` [Qemu-devel] [PATCH v5 07/36] ppc/xive: introduce the XIVE interrupt thread context Cédric Le Goater
2018-11-23 5:08 ` David Gibson
2018-11-25 20:35 ` Cédric Le Goater
2018-11-27 5:07 ` David Gibson
2018-11-27 12:47 ` Cédric Le Goater
2018-11-16 10:57 ` [Qemu-devel] [PATCH v5 08/36] ppc/xive: introduce a simplified XIVE presenter Cédric Le Goater
2018-11-27 23:49 ` David Gibson
2018-11-28 2:34 ` Benjamin Herrenschmidt
2018-11-28 10:59 ` Cédric Le Goater
2018-11-29 0:47 ` David Gibson
2018-11-29 3:39 ` Benjamin Herrenschmidt
2018-11-29 17:51 ` Cédric Le Goater
2018-11-30 1:09 ` David Gibson
2018-12-03 17:05 ` Cédric Le Goater
2018-12-04 1:54 ` David Gibson
2018-12-04 17:04 ` Cédric Le Goater
2018-12-05 1:40 ` David Gibson
2018-11-16 10:57 ` [Qemu-devel] [PATCH v5 09/36] ppc/xive: notify the CPU when the interrupt priority is more privileged Cédric Le Goater
2018-11-28 0:13 ` David Gibson
2018-11-28 2:32 ` Benjamin Herrenschmidt
2018-11-28 2:41 ` David Gibson
2018-11-28 3:00 ` Eric Blake
2018-11-28 11:30 ` Cédric Le Goater
2018-11-29 0:49 ` David Gibson
2018-11-16 10:57 ` [Qemu-devel] [PATCH v5 10/36] spapr/xive: introduce a XIVE interrupt controller Cédric Le Goater
2018-11-28 0:52 ` David Gibson
2018-11-28 16:27 ` Cédric Le Goater
2018-11-29 0:54 ` David Gibson
2018-11-29 14:37 ` Cédric Le Goater
2018-11-29 22:36 ` David Gibson
2018-12-04 17:12 ` Cédric Le Goater
2018-12-05 1:41 ` David Gibson
2018-11-16 10:57 ` [Qemu-devel] [PATCH v5 11/36] spapr/xive: use the VCPU id as a NVT identifier Cédric Le Goater
2018-11-28 2:39 ` David Gibson
2018-11-28 16:48 ` Cédric Le Goater
2018-11-29 1:00 ` David Gibson
2018-11-29 15:27 ` Cédric Le Goater
2018-11-30 1:11 ` David Gibson
2018-11-30 6:56 ` Cédric Le Goater
2018-12-03 1:18 ` David Gibson
2018-12-03 16:30 ` Cédric Le Goater
2018-11-16 10:57 ` [Qemu-devel] [PATCH v5 12/36] spapr: initialize VSMT before initializing the IRQ backend Cédric Le Goater
2018-11-28 2:57 ` David Gibson
2018-11-28 9:35 ` [Qemu-devel] [Qemu-ppc] " Greg Kurz
2018-11-28 16:50 ` Cédric Le Goater
2018-11-28 16:59 ` Greg Kurz
2018-11-29 1:02 ` David Gibson
2018-11-29 6:56 ` Greg Kurz
2018-11-16 10:57 ` [Qemu-devel] [PATCH v5 13/36] spapr: introduce a spapr_irq_init() routine Cédric Le Goater
2018-11-28 2:59 ` David Gibson
2018-11-16 10:57 ` [Qemu-devel] [PATCH v5 14/36] spapr: modify the irq backend 'init' method Cédric Le Goater
2018-11-16 10:57 ` [Qemu-devel] [PATCH v5 15/36] spapr: introdude a new machine IRQ backend for XIVE Cédric Le Goater
2018-11-28 3:28 ` David Gibson
2018-11-28 17:16 ` Cédric Le Goater
2018-11-29 1:07 ` David Gibson
2018-11-29 15:34 ` Cédric Le Goater
2018-11-29 22:39 ` David Gibson
2018-11-16 10:57 ` [Qemu-devel] [PATCH v5 16/36] spapr: add hcalls support for the XIVE exploitation interrupt mode Cédric Le Goater
2018-11-28 4:25 ` David Gibson
2018-11-28 22:21 ` Cédric Le Goater
2018-11-29 1:23 ` David Gibson
2018-11-29 16:04 ` Cédric Le Goater
2018-11-30 1:23 ` David Gibson
2018-11-30 8:07 ` Cédric Le Goater
2018-12-03 1:36 ` David Gibson
2018-12-03 16:49 ` Cédric Le Goater
2018-12-04 1:56 ` David Gibson
2018-11-16 10:57 ` [Qemu-devel] [PATCH v5 17/36] spapr: add device tree support for the XIVE exploitation mode Cédric Le Goater
2018-11-28 4:31 ` David Gibson
2018-11-28 22:26 ` Cédric Le Goater
2018-11-16 10:57 ` [Qemu-devel] [PATCH v5 18/36] spapr: allocate the interrupt thread context under the CPU core Cédric Le Goater
2018-11-28 4:39 ` David Gibson
2018-11-16 10:57 ` [Qemu-devel] [PATCH v5 19/36] spapr: add a 'pseries-3.1-xive' machine type Cédric Le Goater
2018-11-28 4:42 ` David Gibson
2018-11-28 22:37 ` Cédric Le Goater
2018-12-04 15:14 ` Cédric Le Goater
2018-12-05 1:44 ` David Gibson
2018-11-16 10:57 ` [Qemu-devel] [PATCH v5 20/36] spapr: add classes for the XIVE models Cédric Le Goater
2018-11-28 5:13 ` David Gibson
2018-11-28 22:38 ` Cédric Le Goater
2018-11-29 2:59 ` David Gibson
2018-11-29 16:06 ` Cédric Le Goater
2018-11-16 10:57 ` [Qemu-devel] [PATCH v5 21/36] spapr: extend the sPAPR IRQ backend for XICS migration Cédric Le Goater
2018-11-28 5:54 ` David Gibson
2018-11-16 10:57 ` [Qemu-devel] [PATCH v5 22/36] spapr/xive: add models for KVM support Cédric Le Goater
2018-11-28 5:52 ` David Gibson
2018-11-28 22:45 ` Cédric Le Goater
2018-11-29 3:33 ` David Gibson
2018-11-16 10:57 ` [Qemu-devel] [PATCH v5 23/36] spapr/xive: add migration support for KVM Cédric Le Goater
2018-11-29 3:43 ` David Gibson
2018-11-29 16:19 ` Cédric Le Goater
2018-11-30 1:24 ` David Gibson
2018-11-30 7:04 ` Cédric Le Goater
2018-11-16 10:57 ` [Qemu-devel] [PATCH v5 24/36] spapr: add a 'reset' method to the sPAPR IRQ backend Cédric Le Goater
2018-11-29 3:47 ` David Gibson
2018-11-29 16:21 ` Cédric Le Goater
2018-11-16 10:57 ` [Qemu-devel] [PATCH v5 25/36] spapr: set the interrupt presenter at reset Cédric Le Goater
2018-11-29 4:03 ` David Gibson
2018-11-29 16:28 ` Cédric Le Goater
2018-11-16 10:57 ` [Qemu-devel] [PATCH v5 26/36] spapr: add a 'pseries-3.1-dual' machine type Cédric Le Goater
2018-11-16 10:57 ` [Qemu-devel] [PATCH v5 27/36] sysbus: add a sysbus_mmio_unmap() helper Cédric Le Goater
2018-11-29 4:09 ` David Gibson
2018-11-29 16:36 ` Cédric Le Goater
2018-12-03 15:52 ` Cédric Le Goater
2018-12-04 1:59 ` David Gibson
2018-12-03 17:48 ` Peter Maydell
2018-12-04 12:33 ` Cédric Le Goater
2018-12-04 13:04 ` Peter Maydell
2018-11-16 10:57 ` [Qemu-devel] [PATCH v5 28/36] ppc/xics: introduce a icp_kvm_init() routine Cédric Le Goater
2018-11-29 4:08 ` David Gibson
2018-11-29 16:36 ` Cédric Le Goater
2018-11-29 22:43 ` David Gibson
2018-11-16 10:57 ` [Qemu-devel] [PATCH v5 29/36] ppc/xics: remove abort() in icp_kvm_init() Cédric Le Goater
2018-11-16 10:57 ` [Qemu-devel] [PATCH v5 30/36] spapr: check for KVM IRQ device activation Cédric Le Goater
2018-11-16 10:57 ` [Qemu-devel] [PATCH v5 31/36] spapr/xive: export the spapr_xive_kvm_init() routine Cédric Le Goater
2018-11-29 4:11 ` David Gibson
2018-11-16 10:57 ` [Qemu-devel] [PATCH v5 32/36] spapr/rtas: modify spapr_rtas_register() to remove RTAS handlers Cédric Le Goater
2018-11-29 4:12 ` David Gibson
2018-11-29 16:40 ` Cédric Le Goater
2018-11-29 22:44 ` David Gibson
2018-11-16 10:57 ` [Qemu-devel] [PATCH v5 33/36] spapr: introduce routines to delete the KVM IRQ device Cédric Le Goater
2018-11-29 4:17 ` David Gibson
2018-11-29 16:41 ` Cédric Le Goater
2018-11-16 10:57 ` [Qemu-devel] [PATCH v5 34/36] spapr: add KVM support to the 'dual' machine Cédric Le Goater
2018-11-29 4:22 ` David Gibson
2018-11-29 17:07 ` Cédric Le Goater
2018-11-16 10:57 ` [Qemu-devel] [PATCH v5 35/36] ppc: externalize ppc_get_vcpu_by_pir() Cédric Le Goater
2018-11-16 10:57 ` [Qemu-devel] [PATCH v5 36/36] ppc/pnv: add XIVE support Cédric Le Goater
2018-12-03 2:26 ` David Gibson
2018-12-06 15:14 ` Cédric Le Goater
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181122044127.GE10448@umbus.fritz.box \
--to=david@gibson.dropbear.id.au \
--cc=benh@kernel.crashing.org \
--cc=clg@kaod.org \
--cc=qemu-devel@nongnu.org \
--cc=qemu-ppc@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).