Re: [Qemu-devel] [PATCH v5 06/36] ppc/xive: add support for the END Event State buffers

[David Gibson <david@gibson.dropbear.id.au>]

[-- Attachment #1: Type: text/plain, Size: 10391 bytes --]

On Thu, Nov 22, 2018 at 10:58:56PM +0100, Cédric Le Goater wrote:
> On 11/22/18 6:13 AM, David Gibson wrote:
> > On Fri, Nov 16, 2018 at 11:56:59AM +0100, Cédric Le Goater wrote:
> >> The Event Notification Descriptor also contains two Event State
> >> Buffers providing further coalescing of interrupts, one for the
> >> notification event (ESn) and one for the escalation events (ESe). A
> >> MMIO page is assigned for each to control the EOI through loads
> >> only. Stores are not allowed.
> >>
> >> The END ESBs are modeled through an object resembling the 'XiveSource'
> >> It is stateless as the END state bits are backed into the XiveEND
> >> structure under the XiveRouter and the MMIO accesses follow the same
> >> rules as for the standard source ESBs.
> >>
> >> END ESBs are not supported by the Linux drivers neither on OPAL nor on
> >> sPAPR. Nevetherless, it provides a mean to study the question in the
> >> future and validates a bit more the XIVE model.
> >>
> >> Signed-off-by: Cédric Le Goater <clg@kaod.org>
> >> ---
> >>  include/hw/ppc/xive.h |  20 ++++++
> >>  hw/intc/xive.c        | 160 +++++++++++++++++++++++++++++++++++++++++-
> >>  2 files changed, 178 insertions(+), 2 deletions(-)
> >>
> >> diff --git a/include/hw/ppc/xive.h b/include/hw/ppc/xive.h
> >> index ce62aaf28343..24301bf2076d 100644
> >> --- a/include/hw/ppc/xive.h
> >> +++ b/include/hw/ppc/xive.h
> >> @@ -208,6 +208,26 @@ int xive_router_get_end(XiveRouter *xrtr, uint8_t end_blk, uint32_t end_idx,
> >>  int xive_router_set_end(XiveRouter *xrtr, uint8_t end_blk, uint32_t end_idx,
> >>                          XiveEND *end);
> >>  
> >> +/*
> >> + * XIVE END ESBs
> >> + */
> >> +
> >> +#define TYPE_XIVE_END_SOURCE "xive-end-source"
> >> +#define XIVE_END_SOURCE(obj) \
> >> +    OBJECT_CHECK(XiveENDSource, (obj), TYPE_XIVE_END_SOURCE)
> > 
> > Is there a particular reason to make this a full QOM object, rather
> > than just embedding it in the XiveRouter?
> 
> yes, it should probably be under the XiveRouter you are right because
> there is a direct link with the ENDT which is in the XiverRouter. 
> 
> But if I remove the chip_id field from the XiveRouter, it becomes a QOM
> interface. something to ponder.

Huh?  I really don't understand what you're saying here.  What does
chip_id have to do with anything?

>  
> >> +typedef struct XiveENDSource {
> >> +    SysBusDevice parent;
> >> +
> >> +    uint32_t        nr_ends;
> >> +
> >> +    /* ESB memory region */
> >> +    uint32_t        esb_shift;
> >> +    MemoryRegion    esb_mmio;
> >> +
> >> +    XiveRouter      *xrtr;
> >> +} XiveENDSource;
> >> +
> >>  /*
> >>   * For legacy compatibility, the exceptions define up to 256 different
> >>   * priorities. P9 implements only 9 levels : 8 active levels [0 - 7]
> >> diff --git a/hw/intc/xive.c b/hw/intc/xive.c
> >> index 9cb001e7b540..5a8882d47a98 100644
> >> --- a/hw/intc/xive.c
> >> +++ b/hw/intc/xive.c
> >> @@ -622,8 +622,18 @@ static void xive_router_end_notify(XiveRouter *xrtr, uint8_t end_blk,
> >>       * even futher coalescing in the Router
> >>       */
> >>      if (!(end.w0 & END_W0_UCOND_NOTIFY)) {
> >> -        qemu_log_mask(LOG_UNIMP, "XIVE: !UCOND_NOTIFY not implemented\n");
> >> -        return;
> >> +        uint8_t pq = GETFIELD(END_W1_ESn, end.w1);
> >> +        bool notify = xive_esb_trigger(&pq);
> >> +
> >> +        if (pq != GETFIELD(END_W1_ESn, end.w1)) {
> >> +            end.w1 = SETFIELD(END_W1_ESn, end.w1, pq);
> >> +            xive_router_set_end(xrtr, end_blk, end_idx, &end);
> >> +        }
> >> +
> >> +        /* ESn[Q]=1 : end of notification */
> >> +        if (!notify) {
> >> +            return;
> >> +        }
> >>      }
> >>  
> >>      /*
> >> @@ -706,6 +716,151 @@ void xive_eas_pic_print_info(XiveEAS *eas, uint32_t lisn, Monitor *mon)
> >>                     (uint32_t) GETFIELD(EAS_END_DATA, eas->w));
> >>  }
> >>  
> >> +/*
> >> + * END ESB MMIO loads
> >> + */
> >> +static uint64_t xive_end_source_read(void *opaque, hwaddr addr, unsigned size)
> >> +{
> >> +    XiveENDSource *xsrc = XIVE_END_SOURCE(opaque);
> >> +    XiveRouter *xrtr = xsrc->xrtr;
> >> +    uint32_t offset = addr & 0xFFF;
> >> +    uint8_t end_blk;
> >> +    uint32_t end_idx;
> >> +    XiveEND end;
> >> +    uint32_t end_esmask;
> >> +    uint8_t pq;
> >> +    uint64_t ret = -1;
> >> +
> >> +    end_blk = xrtr->chip_id;
> >> +    end_idx = addr >> (xsrc->esb_shift + 1);
> >> +    if (xive_router_get_end(xrtr, end_blk, end_idx, &end)) {
> >> +        qemu_log_mask(LOG_GUEST_ERROR, "XIVE: No END %x/%x\n", end_blk,
> >> +                      end_idx);
> >> +        return -1;
> >> +    }
> >> +
> >> +    if (!(end.w0 & END_W0_VALID)) {
> >> +        qemu_log_mask(LOG_GUEST_ERROR, "XIVE: END %x/%x is invalid\n",
> >> +                      end_blk, end_idx);
> >> +        return -1;
> >> +    }
> >> +
> >> +    end_esmask = addr_is_even(addr, xsrc->esb_shift) ? END_W1_ESn : END_W1_ESe;
> >> +    pq = GETFIELD(end_esmask, end.w1);
> >> +
> >> +    switch (offset) {
> >> +    case XIVE_ESB_LOAD_EOI ... XIVE_ESB_LOAD_EOI + 0x7FF:
> >> +        ret = xive_esb_eoi(&pq);
> >> +
> >> +        /* Forward the source event notification for routing ?? */
> >> +        break;
> >> +
> >> +    case XIVE_ESB_GET ... XIVE_ESB_GET + 0x3FF:
> >> +        ret = pq;
> >> +        break;
> >> +
> >> +    case XIVE_ESB_SET_PQ_00 ... XIVE_ESB_SET_PQ_00 + 0x0FF:
> >> +    case XIVE_ESB_SET_PQ_01 ... XIVE_ESB_SET_PQ_01 + 0x0FF:
> >> +    case XIVE_ESB_SET_PQ_10 ... XIVE_ESB_SET_PQ_10 + 0x0FF:
> >> +    case XIVE_ESB_SET_PQ_11 ... XIVE_ESB_SET_PQ_11 + 0x0FF:
> >> +        ret = xive_esb_set(&pq, (offset >> 8) & 0x3);
> >> +        break;
> >> +    default:
> >> +        qemu_log_mask(LOG_GUEST_ERROR, "XIVE: invalid END ESB load addr %d\n",
> >> +                      offset);
> >> +        return -1;
> >> +    }
> >> +
> >> +    if (pq != GETFIELD(end_esmask, end.w1)) {
> >> +        end.w1 = SETFIELD(end_esmask, end.w1, pq);
> >> +        xive_router_set_end(xrtr, end_blk, end_idx, &end);
> >> +    }
> > 
> > We can probably share some more code with XiveSource here, but that's
> > something that can be refined later.
> 
> yes clearly. The idea was to introduce a XiveESB model handling only the 
> MMIO aspects and rely on an interface to query/modify the underlying PQ bits.
> These state bits are related to a device and the ESB pages are the XIVE way 
> to expose them. 
> 
> I left that for later. I didn't want to complexify more the XiveSource 
> with a feature not used today. 
> 
> Thanks,
> 
> C.
> 
> > 
> >> +
> >> +    return ret;
> >> +}
> >> +
> >> +/*
> >> + * END ESB MMIO stores are invalid
> >> + */
> >> +static void xive_end_source_write(void *opaque, hwaddr addr,
> >> +                                  uint64_t value, unsigned size)
> >> +{
> >> +    qemu_log_mask(LOG_GUEST_ERROR, "XIVE: invalid ESB write addr 0x%"
> >> +                  HWADDR_PRIx"\n", addr);
> >> +}
> >> +
> >> +static const MemoryRegionOps xive_end_source_ops = {
> >> +    .read = xive_end_source_read,
> >> +    .write = xive_end_source_write,
> >> +    .endianness = DEVICE_BIG_ENDIAN,
> >> +    .valid = {
> >> +        .min_access_size = 8,
> >> +        .max_access_size = 8,
> >> +    },
> >> +    .impl = {
> >> +        .min_access_size = 8,
> >> +        .max_access_size = 8,
> >> +    },
> >> +};
> >> +
> >> +static void xive_end_source_realize(DeviceState *dev, Error **errp)
> >> +{
> >> +    XiveENDSource *xsrc = XIVE_END_SOURCE(dev);
> >> +    Object *obj;
> >> +    Error *local_err = NULL;
> >> +
> >> +    obj = object_property_get_link(OBJECT(dev), "xive", &local_err);
> >> +    if (!obj) {
> >> +        error_propagate(errp, local_err);
> >> +        error_prepend(errp, "required link 'xive' not found: ");
> >> +        return;
> >> +    }
> >> +
> >> +    xsrc->xrtr = XIVE_ROUTER(obj);
> >> +
> >> +    if (!xsrc->nr_ends) {
> >> +        error_setg(errp, "Number of interrupt needs to be greater than 0");
> >> +        return;
> >> +    }
> >> +
> >> +    if (xsrc->esb_shift != XIVE_ESB_4K &&
> >> +        xsrc->esb_shift != XIVE_ESB_64K) {
> >> +        error_setg(errp, "Invalid ESB shift setting");
> >> +        return;
> >> +    }
> >> +
> >> +    /*
> >> +     * Each END is assigned an even/odd pair of MMIO pages, the even page
> >> +     * manages the ESn field while the odd page manages the ESe field.
> >> +     */
> >> +    memory_region_init_io(&xsrc->esb_mmio, OBJECT(xsrc),
> >> +                          &xive_end_source_ops, xsrc, "xive.end",
> >> +                          (1ull << (xsrc->esb_shift + 1)) * xsrc->nr_ends);
> >> +    sysbus_init_mmio(SYS_BUS_DEVICE(dev), &xsrc->esb_mmio);
> >> +}
> >> +
> >> +static Property xive_end_source_properties[] = {
> >> +    DEFINE_PROP_UINT32("nr-ends", XiveENDSource, nr_ends, 0),
> >> +    DEFINE_PROP_UINT32("shift", XiveENDSource, esb_shift, XIVE_ESB_64K),
> >> +    DEFINE_PROP_END_OF_LIST(),
> >> +};
> >> +
> >> +static void xive_end_source_class_init(ObjectClass *klass, void *data)
> >> +{
> >> +    DeviceClass *dc = DEVICE_CLASS(klass);
> >> +
> >> +    dc->desc    = "XIVE END Source";
> >> +    dc->props   = xive_end_source_properties;
> >> +    dc->realize = xive_end_source_realize;
> >> +}
> >> +
> >> +static const TypeInfo xive_end_source_info = {
> >> +    .name          = TYPE_XIVE_END_SOURCE,
> >> +    .parent        = TYPE_SYS_BUS_DEVICE,
> >> +    .instance_size = sizeof(XiveENDSource),
> >> +    .class_init    = xive_end_source_class_init,
> >> +};
> >> +
> >>  /*
> >>   * XIVE Fabric
> >>   */
> >> @@ -720,6 +875,7 @@ static void xive_register_types(void)
> >>      type_register_static(&xive_source_info);
> >>      type_register_static(&xive_fabric_info);
> >>      type_register_static(&xive_router_info);
> >> +    type_register_static(&xive_end_source_info);
> >>  }
> >>  
> >>  type_init(xive_register_types)
> > 
> 

-- 
David Gibson			| I'll have my music baroque, and my code
david AT gibson.dropbear.id.au	| minimalist, thank you.  NOT _the_ _other_
				| _way_ _around_!
http://www.ozlabs.org/~dgibson

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]