From: Yuval Shaia <yuval.shaia@oracle.com>
To: yuval.shaia@oracle.com, marcel.apfelbaum@gmail.com,
dmitry.fleytman@gmail.com, jasowang@redhat.com,
eblake@redhat.com, armbru@redhat.com, pbonzini@redhat.com,
qemu-devel@nongnu.org, shamir.rabinovitch@oracle.com,
cohuck@redhat.com
Subject: [Qemu-devel] [PATCH v6 02/23] hw/rdma: Add ability to force notification without re-arm
Date: Thu, 29 Nov 2018 23:47:44 +0200 [thread overview]
Message-ID: <20181129214805.2749-3-yuval.shaia@oracle.com> (raw)
In-Reply-To: <20181129214805.2749-1-yuval.shaia@oracle.com>
Upon completion of incoming packet the device pushes CQE to driver's RX
ring and notify the driver (msix).
While for data-path incoming packets the driver needs the ability to
control whether it wished to receive interrupts or not, for control-path
packets such as incoming MAD the driver needs to be notified anyway, it
even do not need to re-arm the notification bit.
Enhance the notification field to support this.
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
---
hw/rdma/rdma_rm.c | 12 ++++++++++--
hw/rdma/rdma_rm_defs.h | 8 +++++++-
hw/rdma/vmw/pvrdma_qp_ops.c | 6 ++++--
3 files changed, 21 insertions(+), 5 deletions(-)
diff --git a/hw/rdma/rdma_rm.c b/hw/rdma/rdma_rm.c
index 8d59a42cd1..4f10fcabcc 100644
--- a/hw/rdma/rdma_rm.c
+++ b/hw/rdma/rdma_rm.c
@@ -263,7 +263,7 @@ int rdma_rm_alloc_cq(RdmaDeviceResources *dev_res, RdmaBackendDev *backend_dev,
}
cq->opaque = opaque;
- cq->notify = false;
+ cq->notify = CNT_CLEAR;
rc = rdma_backend_create_cq(backend_dev, &cq->backend_cq, cqe);
if (rc) {
@@ -291,7 +291,10 @@ void rdma_rm_req_notify_cq(RdmaDeviceResources *dev_res, uint32_t cq_handle,
return;
}
- cq->notify = notify;
+ if (cq->notify != CNT_SET) {
+ cq->notify = notify ? CNT_ARM : CNT_CLEAR;
+ }
+
pr_dbg("notify=%d\n", cq->notify);
}
@@ -349,6 +352,11 @@ int rdma_rm_alloc_qp(RdmaDeviceResources *dev_res, uint32_t pd_handle,
return -EINVAL;
}
+ if (qp_type == IBV_QPT_GSI) {
+ scq->notify = CNT_SET;
+ rcq->notify = CNT_SET;
+ }
+
qp = res_tbl_alloc(&dev_res->qp_tbl, &rm_qpn);
if (!qp) {
return -ENOMEM;
diff --git a/hw/rdma/rdma_rm_defs.h b/hw/rdma/rdma_rm_defs.h
index 7228151239..9b399063d3 100644
--- a/hw/rdma/rdma_rm_defs.h
+++ b/hw/rdma/rdma_rm_defs.h
@@ -49,10 +49,16 @@ typedef struct RdmaRmPD {
uint32_t ctx_handle;
} RdmaRmPD;
+typedef enum CQNotificationType {
+ CNT_CLEAR,
+ CNT_ARM,
+ CNT_SET,
+} CQNotificationType;
+
typedef struct RdmaRmCQ {
RdmaBackendCQ backend_cq;
void *opaque;
- bool notify;
+ CQNotificationType notify;
} RdmaRmCQ;
/* MR (DMA region) */
diff --git a/hw/rdma/vmw/pvrdma_qp_ops.c b/hw/rdma/vmw/pvrdma_qp_ops.c
index c668afd0ed..762700a205 100644
--- a/hw/rdma/vmw/pvrdma_qp_ops.c
+++ b/hw/rdma/vmw/pvrdma_qp_ops.c
@@ -89,8 +89,10 @@ static int pvrdma_post_cqe(PVRDMADev *dev, uint32_t cq_handle,
pvrdma_ring_write_inc(&dev->dsr_info.cq);
pr_dbg("cq->notify=%d\n", cq->notify);
- if (cq->notify) {
- cq->notify = false;
+ if (cq->notify != CNT_CLEAR) {
+ if (cq->notify == CNT_ARM) {
+ cq->notify = CNT_CLEAR;
+ }
post_interrupt(dev, INTR_VEC_CMD_COMPLETION_Q);
}
--
2.17.2
next prev parent reply other threads:[~2018-11-29 21:48 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-29 21:47 [Qemu-devel] [PATCH v6 00/23] Add support for RDMA MAD Yuval Shaia
2018-11-29 21:47 ` [Qemu-devel] [PATCH v6 01/23] contrib/rdmacm-mux: Add implementation of RDMA User MAD multiplexer Yuval Shaia
2018-11-29 21:47 ` Yuval Shaia [this message]
2018-11-29 21:47 ` [Qemu-devel] [PATCH v6 03/23] hw/rdma: Return qpn 1 if ibqp is NULL Yuval Shaia
2018-11-29 21:47 ` [Qemu-devel] [PATCH v6 04/23] hw/rdma: Abort send-op if fail to create addr handler Yuval Shaia
2018-11-29 21:47 ` [Qemu-devel] [PATCH v6 05/23] hw/rdma: Add support for MAD packets Yuval Shaia
2018-11-29 21:47 ` [Qemu-devel] [PATCH v6 06/23] hw/pvrdma: Make function reset_device return void Yuval Shaia
2018-11-29 21:47 ` [Qemu-devel] [PATCH v6 07/23] hw/pvrdma: Make default pkey 0xFFFF Yuval Shaia
2018-11-29 21:47 ` [Qemu-devel] [PATCH v6 08/23] hw/pvrdma: Set the correct opcode for recv completion Yuval Shaia
2018-11-29 21:47 ` [Qemu-devel] [PATCH v6 09/23] hw/pvrdma: Set the correct opcode for send completion Yuval Shaia
2018-11-29 21:47 ` [Qemu-devel] [PATCH v6 10/23] qapi: Define new QMP message for pvrdma Yuval Shaia
2018-11-29 21:47 ` [Qemu-devel] [PATCH v6 11/23] hw/pvrdma: Add support to allow guest to configure GID table Yuval Shaia
2018-12-05 6:10 ` Marcel Apfelbaum
2018-11-29 21:47 ` [Qemu-devel] [PATCH v6 12/23] vmxnet3: Move some definitions to header file Yuval Shaia
2018-11-29 21:47 ` [Qemu-devel] [PATCH v6 13/23] hw/pvrdma: Make sure PCI function 0 is vmxnet3 Yuval Shaia
2018-11-29 21:47 ` [Qemu-devel] [PATCH v6 14/23] hw/rdma: Initialize node_guid from vmxnet3 mac address Yuval Shaia
2018-11-29 21:47 ` [Qemu-devel] [PATCH v6 15/23] hw/pvrdma: Make device state depend on Ethernet function state Yuval Shaia
2018-11-29 21:47 ` [Qemu-devel] [PATCH v6 16/23] hw/pvrdma: Fill all CQE fields Yuval Shaia
2018-11-29 21:47 ` [Qemu-devel] [PATCH v6 17/23] hw/pvrdma: Fill error code in command's response Yuval Shaia
2018-11-29 21:48 ` [Qemu-devel] [PATCH v6 18/23] hw/rdma: Remove unneeded code that handles more that one port Yuval Shaia
2018-11-29 21:48 ` [Qemu-devel] [PATCH v6 19/23] vl: Introduce shutdown_notifiers Yuval Shaia
2018-11-29 21:48 ` [Qemu-devel] [PATCH v6 20/23] hw/pvrdma: Clean device's resource when system is shutdown Yuval Shaia
2018-11-29 21:48 ` [Qemu-devel] [PATCH v6 21/23] hw/rdma: Do not use bitmap_zero_extend to free bitmap Yuval Shaia
2018-11-29 21:48 ` [Qemu-devel] [PATCH v6 22/23] hw/rdma: Do not call rdma_backend_del_gid on an empty gid Yuval Shaia
2018-11-29 21:48 ` [Qemu-devel] [PATCH v6 23/23] docs: Update pvrdma device documentation Yuval Shaia
2018-12-05 6:12 ` Marcel Apfelbaum
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181129214805.2749-3-yuval.shaia@oracle.com \
--to=yuval.shaia@oracle.com \
--cc=armbru@redhat.com \
--cc=cohuck@redhat.com \
--cc=dmitry.fleytman@gmail.com \
--cc=eblake@redhat.com \
--cc=jasowang@redhat.com \
--cc=marcel.apfelbaum@gmail.com \
--cc=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=shamir.rabinovitch@oracle.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).