qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Richard Henderson <richard.henderson@linaro.org>
To: qemu-devel@nongnu.org
Cc: cohuck@redhat.com, david@redhat.com, qemu-s390x@nongnu.org
Subject: [Qemu-devel] [PATCH for-4.0 2/2] target/s390x: Implement STCK et al for CONFIG_USER_ONLY
Date: Fri, 30 Nov 2018 11:22:16 -0800	[thread overview]
Message-ID: <20181130192216.26987-3-richard.henderson@linaro.org> (raw)
In-Reply-To: <20181130192216.26987-1-richard.henderson@linaro.org>

This is a non-privileged instruction that was only implemented
for system mode.  However, the stck instruction is used by glibc,
so this was causing SIGILL for programs run under debian stretch.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
 target/s390x/helper.h      |  2 +-
 target/s390x/misc_helper.c | 13 ++++++++++++-
 target/s390x/translate.c   |  2 ++
 target/s390x/insn-data.def | 11 ++++++-----
 4 files changed, 21 insertions(+), 7 deletions(-)

diff --git a/target/s390x/helper.h b/target/s390x/helper.h
index 018e9dd414..6260b50496 100644
--- a/target/s390x/helper.h
+++ b/target/s390x/helper.h
@@ -121,13 +121,13 @@ DEF_HELPER_4(cu41, i32, env, i32, i32, i32)
 DEF_HELPER_4(cu42, i32, env, i32, i32, i32)
 DEF_HELPER_5(msa, i32, env, i32, i32, i32, i32)
 DEF_HELPER_FLAGS_1(stpt, TCG_CALL_NO_RWG, i64, env)
+DEF_HELPER_FLAGS_1(stck, TCG_CALL_NO_RWG_SE, i64, env)
 
 #ifndef CONFIG_USER_ONLY
 DEF_HELPER_3(servc, i32, env, i64, i64)
 DEF_HELPER_4(diag, void, env, i32, i32, i32)
 DEF_HELPER_3(load_psw, noreturn, env, i64, i64)
 DEF_HELPER_FLAGS_2(spx, TCG_CALL_NO_RWG, void, env, i64)
-DEF_HELPER_FLAGS_1(stck, TCG_CALL_NO_RWG_SE, i64, env)
 DEF_HELPER_FLAGS_2(sck, TCG_CALL_NO_RWG, i32, env, i64)
 DEF_HELPER_FLAGS_2(sckc, TCG_CALL_NO_RWG, void, env, i64)
 DEF_HELPER_FLAGS_2(sckpf, TCG_CALL_NO_RWG, void, env, i64)
diff --git a/target/s390x/misc_helper.c b/target/s390x/misc_helper.c
index 3f91579570..c2940afecb 100644
--- a/target/s390x/misc_helper.c
+++ b/target/s390x/misc_helper.c
@@ -76,8 +76,19 @@ uint64_t HELPER(stpt)(CPUS390XState *env)
 #endif
 }
 
-#ifndef CONFIG_USER_ONLY
+#ifdef CONFIG_USER_ONLY
+/* Store Clock */
+uint64_t HELPER(stck)(CPUS390XState *env)
+{
+    struct timespec ts;
+    uint64_t ms;
 
+    clock_gettime(CLOCK_REALTIME, &ts);
+    ms = (ts.tv_nsec / 1000) + (ts.tv_sec * 100000ull);
+
+    return TOD_UNIX_EPOCH + ms;
+}
+#else
 /* SCLP service call */
 uint32_t HELPER(servc)(CPUS390XState *env, uint64_t r1, uint64_t r2)
 {
diff --git a/target/s390x/translate.c b/target/s390x/translate.c
index b5bd56b7ee..8bb9c0529a 100644
--- a/target/s390x/translate.c
+++ b/target/s390x/translate.c
@@ -4010,6 +4010,7 @@ static DisasJumpType op_stap(DisasContext *s, DisasOps *o)
     tcg_gen_ld32u_i64(o->out, cpu_env, offsetof(CPUS390XState, core_id));
     return DISAS_NEXT;
 }
+#endif
 
 static DisasJumpType op_stck(DisasContext *s, DisasOps *o)
 {
@@ -4046,6 +4047,7 @@ static DisasJumpType op_stcke(DisasContext *s, DisasOps *o)
     return DISAS_NEXT;
 }
 
+#ifndef CONFIG_USER_ONLY
 static DisasJumpType op_sck(DisasContext *s, DisasOps *o)
 {
     tcg_gen_qemu_ld_i64(o->in1, o->addr1, get_mem_index(s), MO_TEQ | MO_ALIGN);
diff --git a/target/s390x/insn-data.def b/target/s390x/insn-data.def
index 54e39df831..922227bada 100644
--- a/target/s390x/insn-data.def
+++ b/target/s390x/insn-data.def
@@ -837,6 +837,12 @@
     C(0xe33e, STRV,    RXY_a, Z,   la2, r1_32u, new, m1_32, rev32, 0)
     C(0xe32f, STRVG,   RXY_a, Z,   la2, r1_o, new, m1_64, rev64, 0)
 
+/* STORE CLOCK */
+    C(0xb205, STCK,    S,     Z,   la2, 0, new, m1_64, stck, 0)
+    C(0xb27c, STCKF,   S,     SCF, la2, 0, new, m1_64, stck, 0)
+/* STORE CLOCK EXTENDED */
+    C(0xb278, STCKE,   S,     Z,   0, a2, 0, 0, stcke, 0)
+
 /* STORE FACILITY LIST EXTENDED */
     C(0xb2b0, STFLE,   S,  SFLE,   0, a2, 0, 0, stfle, 0)
 /* STORE FPC */
@@ -1020,11 +1026,6 @@
     F(0x8000, SSM,     S,     Z,   0, m2_8u, 0, 0, ssm, 0, IF_PRIV)
 /* SIGNAL PROCESSOR */
     F(0xae00, SIGP,    RS_a,  Z,   0, a2, 0, 0, sigp, 0, IF_PRIV)
-/* STORE CLOCK */
-    C(0xb205, STCK,    S,     Z,   la2, 0, new, m1_64, stck, 0)
-    C(0xb27c, STCKF,   S,     SCF, la2, 0, new, m1_64, stck, 0)
-/* STORE CLOCK EXTENDED */
-    C(0xb278, STCKE,   S,     Z,   0, a2, 0, 0, stcke, 0)
 /* STORE CLOCK COMPARATOR */
     F(0xb207, STCKC,   S,     Z,   la2, 0, new, m1_64a, stckc, 0, IF_PRIV)
 /* STORE CONTROL */
-- 
2.17.2

  parent reply	other threads:[~2018-11-30 19:22 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-11-30 19:22 [Qemu-devel] [PATCH for-4.0 0/2] target/s390x: Implement STCK et al for CONFIG_USER_ONLY Richard Henderson
2018-11-30 19:22 ` [Qemu-devel] [PATCH for-4.0 1/2] target/s390x: Move TOD_UNIX_EPOCH to cpu.h Richard Henderson
2018-12-03  6:07   ` [Qemu-devel] [qemu-s390x] " Thomas Huth
2018-12-03 10:21   ` [Qemu-devel] " David Hildenbrand
2018-11-30 19:22 ` Richard Henderson [this message]
2018-12-03  6:19   ` [Qemu-devel] [qemu-s390x] [PATCH for-4.0 2/2] target/s390x: Implement STCK et al for CONFIG_USER_ONLY Thomas Huth
2018-12-03 13:27     ` Richard Henderson
2018-12-03 14:02       ` Thomas Huth
2018-12-03 14:29         ` Richard Henderson
2018-12-03 14:31           ` Thomas Huth
2018-12-03 14:51         ` David Hildenbrand
2018-12-03 10:21   ` [Qemu-devel] " David Hildenbrand
2018-12-03 13:30     ` Richard Henderson
2018-12-03 14:48       ` David Hildenbrand

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181130192216.26987-3-richard.henderson@linaro.org \
    --to=richard.henderson@linaro.org \
    --cc=cohuck@redhat.com \
    --cc=david@redhat.com \
    --cc=qemu-devel@nongnu.org \
    --cc=qemu-s390x@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).