From: "Michael S. Tsirkin" <mst@redhat.com>
To: Daniel Henrique Barboza <danielhb413@gmail.com>
Cc: qemu-devel@nongnu.org, ehabkost@redhat.com,
mdroth@linux.vnet.ibm.com, armbru@redhat.com,
imammedo@redhat.com
Subject: Re: [Qemu-devel] [PATCH v11 3/3] qmp hmp: Make system_wakeup check wake-up support and run state
Date: Fri, 7 Dec 2018 15:02:52 -0500 [thread overview]
Message-ID: <20181207150227-mutt-send-email-mst@kernel.org> (raw)
In-Reply-To: <20181205194701.17836-4-danielhb413@gmail.com>
On Wed, Dec 05, 2018 at 05:47:01PM -0200, Daniel Henrique Barboza wrote:
> The qmp/hmp command 'system_wakeup' is simply a direct call to
> 'qemu_system_wakeup_request' from vl.c. This function verifies if
> runstate is SUSPENDED and if the wake up reason is valid before
> proceeding. However, no error or warning is thrown if any of those
> pre-requirements isn't met. There is no way for the caller to
> differentiate between a successful wakeup or an error state caused
> when trying to wake up a guest that wasn't suspended.
>
> This means that system_wakeup is silently failing, which can be
> considered a bug. Adding error handling isn't an API break in this
> case - applications that didn't check the result will remain broken,
> the ones that check it will have a chance to deal with it.
>
> Adding to that, the commit before previous created a new QMP API called
> query-current-machine, with a new flag called wakeup-suspend-support,
> that indicates if the guest has the capability of waking up from suspended
> state. Although such guest will never reach SUSPENDED state and erroring
> it out in this scenario would suffice, it is more informative for the user
> to differentiate between a failure because the guest isn't suspended versus
> a failure because the guest does not have support for wake up at all.
>
> All this considered, this patch changes qmp_system_wakeup to check if
> the guest is capable of waking up from suspend, and if it is suspended.
> After this patch, this is the output of system_wakeup in a guest that
> does not have wake-up from suspend support (ppc64):
>
> (qemu) system_wakeup
> wake-up from suspend is not supported by this guest
> (qemu)
>
> And this is the output of system_wakeup in a x86 guest that has the
> support but isn't suspended:
>
> (qemu) system_wakeup
> Unable to wake up: guest is not in suspended state
> (qemu)
>
> Reported-by: Balamuruhan S <bala24@linux.vnet.ibm.com>
> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
for ACPI:
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
> ---
> hmp.c | 5 ++++-
> hw/acpi/core.c | 3 ++-
> hw/char/serial.c | 2 +-
> hw/input/ps2.c | 6 +++---
> hw/timer/mc146818rtc.c | 2 +-
> include/sysemu/sysemu.h | 3 ++-
> migration/migration.c | 4 ++--
> qapi/misc.json | 8 +++++++-
> qmp.c | 8 +++++++-
> vl.c | 6 ++++--
> 10 files changed, 33 insertions(+), 14 deletions(-)
>
> diff --git a/hmp.c b/hmp.c
> index 7828f93a39..0f5d943413 100644
> --- a/hmp.c
> +++ b/hmp.c
> @@ -1220,7 +1220,10 @@ void hmp_cont(Monitor *mon, const QDict *qdict)
>
> void hmp_system_wakeup(Monitor *mon, const QDict *qdict)
> {
> - qmp_system_wakeup(NULL);
> + Error *err = NULL;
> +
> + qmp_system_wakeup(&err);
> + hmp_handle_error(mon, &err);
> }
>
> void hmp_nmi(Monitor *mon, const QDict *qdict)
> diff --git a/hw/acpi/core.c b/hw/acpi/core.c
> index 52e18d7810..d6f0709691 100644
> --- a/hw/acpi/core.c
> +++ b/hw/acpi/core.c
> @@ -514,7 +514,8 @@ static uint32_t acpi_pm_tmr_get(ACPIREGS *ar)
> static void acpi_pm_tmr_timer(void *opaque)
> {
> ACPIREGS *ar = opaque;
> - qemu_system_wakeup_request(QEMU_WAKEUP_REASON_PMTIMER);
> +
> + qemu_system_wakeup_request(QEMU_WAKEUP_REASON_PMTIMER, NULL);
> ar->tmr.update_sci(ar);
> }
>
> diff --git a/hw/char/serial.c b/hw/char/serial.c
> index 02463e3388..7c42a2abfc 100644
> --- a/hw/char/serial.c
> +++ b/hw/char/serial.c
> @@ -611,7 +611,7 @@ static void serial_receive1(void *opaque, const uint8_t *buf, int size)
> SerialState *s = opaque;
>
> if (s->wakeup) {
> - qemu_system_wakeup_request(QEMU_WAKEUP_REASON_OTHER);
> + qemu_system_wakeup_request(QEMU_WAKEUP_REASON_OTHER, NULL);
> }
> if(s->fcr & UART_FCR_FE) {
> int i;
> diff --git a/hw/input/ps2.c b/hw/input/ps2.c
> index eb33ee9b6f..d3161f1e7c 100644
> --- a/hw/input/ps2.c
> +++ b/hw/input/ps2.c
> @@ -255,7 +255,7 @@ static void ps2_put_keycode(void *opaque, int keycode)
> PS2KbdState *s = opaque;
>
> trace_ps2_put_keycode(opaque, keycode);
> - qemu_system_wakeup_request(QEMU_WAKEUP_REASON_OTHER);
> + qemu_system_wakeup_request(QEMU_WAKEUP_REASON_OTHER, NULL);
>
> if (s->translate) {
> if (keycode == 0xf0) {
> @@ -285,7 +285,7 @@ static void ps2_keyboard_event(DeviceState *dev, QemuConsole *src,
> return;
> }
>
> - qemu_system_wakeup_request(QEMU_WAKEUP_REASON_OTHER);
> + qemu_system_wakeup_request(QEMU_WAKEUP_REASON_OTHER, NULL);
> assert(evt->type == INPUT_EVENT_KIND_KEY);
> qcode = qemu_input_key_value_to_qcode(key->key);
>
> @@ -748,7 +748,7 @@ static void ps2_mouse_sync(DeviceState *dev)
> }
>
> if (s->mouse_buttons) {
> - qemu_system_wakeup_request(QEMU_WAKEUP_REASON_OTHER);
> + qemu_system_wakeup_request(QEMU_WAKEUP_REASON_OTHER, NULL);
> }
> if (!(s->mouse_status & MOUSE_STATUS_REMOTE)) {
> /* if not remote, send event. Multiple events are sent if
> diff --git a/hw/timer/mc146818rtc.c b/hw/timer/mc146818rtc.c
> index e4e4de8b8a..69483152c3 100644
> --- a/hw/timer/mc146818rtc.c
> +++ b/hw/timer/mc146818rtc.c
> @@ -455,7 +455,7 @@ static void rtc_update_timer(void *opaque)
> if (qemu_clock_get_ns(rtc_clock) >= s->next_alarm_time) {
> irqs |= REG_C_AF;
> if (s->cmos_data[RTC_REG_B] & REG_B_AIE) {
> - qemu_system_wakeup_request(QEMU_WAKEUP_REASON_RTC);
> + qemu_system_wakeup_request(QEMU_WAKEUP_REASON_RTC, NULL);
> }
> }
>
> diff --git a/include/sysemu/sysemu.h b/include/sysemu/sysemu.h
> index 0446adacc6..162c4b16d9 100644
> --- a/include/sysemu/sysemu.h
> +++ b/include/sysemu/sysemu.h
> @@ -74,7 +74,8 @@ void qemu_exit_preconfig_request(void);
> void qemu_system_reset_request(ShutdownCause reason);
> void qemu_system_suspend_request(void);
> void qemu_register_suspend_notifier(Notifier *notifier);
> -void qemu_system_wakeup_request(WakeupReason reason);
> +bool qemu_wakeup_suspend_enabled(void);
> +void qemu_system_wakeup_request(WakeupReason reason, Error **errp);
> void qemu_system_wakeup_enable(WakeupReason reason, bool enabled);
> void qemu_register_wakeup_notifier(Notifier *notifier);
> void qemu_register_wakeup_support(void);
> diff --git a/migration/migration.c b/migration/migration.c
> index 49ffb9997a..ffc4d9e556 100644
> --- a/migration/migration.c
> +++ b/migration/migration.c
> @@ -2408,7 +2408,7 @@ static int postcopy_start(MigrationState *ms)
> qemu_mutex_lock_iothread();
> trace_postcopy_start_set_run();
>
> - qemu_system_wakeup_request(QEMU_WAKEUP_REASON_OTHER);
> + qemu_system_wakeup_request(QEMU_WAKEUP_REASON_OTHER, NULL);
> global_state_store();
> ret = vm_stop_force_state(RUN_STATE_FINISH_MIGRATE);
> if (ret < 0) {
> @@ -2612,7 +2612,7 @@ static void migration_completion(MigrationState *s)
> if (s->state == MIGRATION_STATUS_ACTIVE) {
> qemu_mutex_lock_iothread();
> s->downtime_start = qemu_clock_get_ms(QEMU_CLOCK_REALTIME);
> - qemu_system_wakeup_request(QEMU_WAKEUP_REASON_OTHER);
> + qemu_system_wakeup_request(QEMU_WAKEUP_REASON_OTHER, NULL);
> s->vm_was_running = runstate_is_running();
> ret = global_state_store();
>
> diff --git a/qapi/misc.json b/qapi/misc.json
> index deb982ed38..03df2c37cf 100644
> --- a/qapi/misc.json
> +++ b/qapi/misc.json
> @@ -1235,12 +1235,18 @@
> ##
> # @system_wakeup:
> #
> -# Wakeup guest from suspend. Does nothing in case the guest isn't suspended.
> +# Wake up guest from suspend. If the guest has wake-up from suspend
> +# support enabled (wakeup-suspend-support flag from
> +# query-current-machine), wake-up guest from suspend if the guest is
> +# in SUSPENDED state. Return an error otherwise.
> #
> # Since: 1.1
> #
> # Returns: nothing.
> #
> +# Note: prior to 4.0, this command does nothing in case the guest
> +# isn't suspended.
> +#
> # Example:
> #
> # -> { "execute": "system_wakeup" }
> diff --git a/qmp.c b/qmp.c
> index e7c0a2fd60..f557d1617d 100644
> --- a/qmp.c
> +++ b/qmp.c
> @@ -183,7 +183,13 @@ void qmp_cont(Error **errp)
>
> void qmp_system_wakeup(Error **errp)
> {
> - qemu_system_wakeup_request(QEMU_WAKEUP_REASON_OTHER);
> + if (!qemu_wakeup_suspend_enabled()) {
> + error_setg(errp,
> + "wake-up from suspend is not supported by this guest");
> + return;
> + }
> +
> + qemu_system_wakeup_request(QEMU_WAKEUP_REASON_OTHER, errp);
> }
>
> ObjectPropertyInfoList *qmp_qom_list(const char *path, Error **errp)
> diff --git a/vl.c b/vl.c
> index 8f5b3ef4e9..5b51bbc47c 100644
> --- a/vl.c
> +++ b/vl.c
> @@ -1752,11 +1752,13 @@ void qemu_register_suspend_notifier(Notifier *notifier)
> notifier_list_add(&suspend_notifiers, notifier);
> }
>
> -void qemu_system_wakeup_request(WakeupReason reason)
> +void qemu_system_wakeup_request(WakeupReason reason, Error **errp)
> {
> trace_system_wakeup_request(reason);
>
> if (!runstate_check(RUN_STATE_SUSPENDED)) {
> + error_setg(errp,
> + "Unable to wake up: guest is not in suspended state");
> return;
> }
> if (!(wakeup_reason_mask & (1 << reason))) {
> @@ -1786,7 +1788,7 @@ void qemu_register_wakeup_support(void)
> wakeup_suspend_enabled = true;
> }
>
> -static bool qemu_wakeup_suspend_enabled(void)
> +bool qemu_wakeup_suspend_enabled(void)
> {
> return wakeup_suspend_enabled;
> }
> --
> 2.19.2
next prev parent reply other threads:[~2018-12-07 20:03 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-12-05 19:46 [Qemu-devel] [PATCH v11 0/3] wakeup-from-suspend and system_wakeup changes Daniel Henrique Barboza
2018-12-05 19:46 ` [Qemu-devel] [PATCH v11 1/3] qmp: query-current-machine with wakeup-suspend-support Daniel Henrique Barboza
2018-12-06 6:53 ` Markus Armbruster
2018-12-05 19:47 ` [Qemu-devel] [PATCH v11 2/3] qga: update guest-suspend-ram and guest-suspend-hybrid descriptions Daniel Henrique Barboza
2018-12-06 6:54 ` Markus Armbruster
2018-12-05 19:47 ` [Qemu-devel] [PATCH v11 3/3] qmp hmp: Make system_wakeup check wake-up support and run state Daniel Henrique Barboza
2018-12-06 6:58 ` Markus Armbruster
2018-12-07 20:02 ` Michael S. Tsirkin [this message]
2018-12-06 6:59 ` [Qemu-devel] [PATCH v11 0/3] wakeup-from-suspend and system_wakeup changes Markus Armbruster
2018-12-07 19:54 ` Eduardo Habkost
2018-12-10 6:39 ` Markus Armbruster
2018-12-10 7:30 ` Markus Armbruster
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181207150227-mutt-send-email-mst@kernel.org \
--to=mst@redhat.com \
--cc=armbru@redhat.com \
--cc=danielhb413@gmail.com \
--cc=ehabkost@redhat.com \
--cc=imammedo@redhat.com \
--cc=mdroth@linux.vnet.ibm.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).