qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: David Gibson <david@gibson.dropbear.id.au>
To: "Cédric Le Goater" <clg@kaod.org>
Cc: qemu-ppc@nongnu.org, qemu-devel@nongnu.org,
	Benjamin Herrenschmidt <benh@kernel.crashing.org>
Subject: Re: [Qemu-devel] [PATCH v7 06/19] spapr/xive: use the VCPU id as a NVT identifier
Date: Mon, 10 Dec 2018 15:42:17 +1100	[thread overview]
Message-ID: <20181210044217.GO4261@umbus.fritz.box> (raw)
In-Reply-To: <20181209194610.29727-7-clg@kaod.org>

[-- Attachment #1: Type: text/plain, Size: 4744 bytes --]

On Sun, Dec 09, 2018 at 08:45:57PM +0100, Cédric Le Goater wrote:
> The IVPE scans the O/S CAM line of the XIVE thread interrupt contexts
> to find a matching Notification Virtual Target (NVT) among the NVTs
> dispatched on the HW processor threads.
> 
> On a real system, the thread interrupt contexts are updated by the
> hypervisor when a Virtual Processor is scheduled to run on a HW
> thread. Under QEMU, the model will emulate the same behavior by
> hardwiring the NVT identifier in the thread context registers at
> reset.
> 
> The NVT identifier used by the sPAPRXive model is the VCPU id. The END
> identifier is also derived from the VCPU id. A set of helpers doing
> the conversion between identifiers are provided for the hcalls
> configuring the sources and the ENDs.
> 
> The model does not need a NVT table but the XiveRouter NVT operations
> are provided to perform some extra checks in the routing algorithm.
> 
> Signed-off-by: Cédric Le Goater <clg@kaod.org>

Applied.

> ---
> 
>  Changes since v6:
> 
>  - simplified the prototypes of helpers
>  - introduced an assert in set_nvt() method
> 
>  hw/intc/spapr_xive.c | 56 +++++++++++++++++++++++++++++++++++++++++++-
>  1 file changed, 55 insertions(+), 1 deletion(-)
> 
> diff --git a/hw/intc/spapr_xive.c b/hw/intc/spapr_xive.c
> index eef5830d45c6..3ade419fdbb1 100644
> --- a/hw/intc/spapr_xive.c
> +++ b/hw/intc/spapr_xive.c
> @@ -26,6 +26,26 @@
>  #define SPAPR_XIVE_VC_BASE   0x0006010000000000ull
>  #define SPAPR_XIVE_TM_BASE   0x0006030203180000ull
>  
> +/*
> + * The allocation of VP blocks is a complex operation in OPAL and the
> + * VP identifiers have a relation with the number of HW chips, the
> + * size of the VP blocks, VP grouping, etc. The QEMU sPAPR XIVE
> + * controller model does not have the same constraints and can use a
> + * simple mapping scheme of the CPU vcpu_id
> + *
> + * These identifiers are never returned to the OS.
> + */
> +
> +#define SPAPR_XIVE_NVT_BASE 0x400
> +
> +/*
> + * sPAPR NVT and END indexing helpers
> + */
> +static uint32_t spapr_xive_nvt_to_target(uint8_t nvt_blk, uint32_t nvt_idx)
> +{
> +    return nvt_idx - SPAPR_XIVE_NVT_BASE;
> +}
> +
>  /*
>   * On sPAPR machines, use a simplified output for the XIVE END
>   * structure dumping only the information related to the OS EQ.
> @@ -40,7 +60,8 @@ static void spapr_xive_end_pic_print_info(sPAPRXive *xive, XiveEND *end,
>      uint32_t nvt = GETFIELD_BE32(END_W6_NVT_INDEX, end->w6);
>      uint8_t priority = GETFIELD_BE32(END_W7_F0_PRIORITY, end->w7);
>  
> -    monitor_printf(mon, "%3d/%d % 6d/%5d ^%d", nvt,
> +    monitor_printf(mon, "%3d/%d % 6d/%5d ^%d",
> +                   spapr_xive_nvt_to_target(0, nvt),
>                     priority, qindex, qentries, qgen);
>  
>      xive_end_queue_pic_print_info(end, 6, mon);
> @@ -246,6 +267,37 @@ static int spapr_xive_write_end(XiveRouter *xrtr, uint8_t end_blk,
>      return 0;
>  }
>  
> +static int spapr_xive_get_nvt(XiveRouter *xrtr,
> +                              uint8_t nvt_blk, uint32_t nvt_idx, XiveNVT *nvt)
> +{
> +    uint32_t vcpu_id = spapr_xive_nvt_to_target(nvt_blk, nvt_idx);
> +    PowerPCCPU *cpu = spapr_find_cpu(vcpu_id);
> +
> +    if (!cpu) {
> +        /* TODO: should we assert() if we can find a NVT ? */
> +        return -1;
> +    }
> +
> +    /*
> +     * sPAPR does not maintain a NVT table. Return that the NVT is
> +     * valid if we have found a matching CPU
> +     */
> +    nvt->w0 = cpu_to_be32(NVT_W0_VALID);
> +    return 0;
> +}
> +
> +static int spapr_xive_write_nvt(XiveRouter *xrtr, uint8_t nvt_blk,
> +                                uint32_t nvt_idx, XiveNVT *nvt,
> +                                uint8_t word_number)
> +{
> +    /*
> +     * We don't need to write back to the NVTs because the sPAPR
> +     * machine should never hit a non-scheduled NVT. It should never
> +     * get called.
> +     */
> +    g_assert_not_reached();
> +}
> +
>  static const VMStateDescription vmstate_spapr_xive_end = {
>      .name = TYPE_SPAPR_XIVE "/end",
>      .version_id = 1,
> @@ -308,6 +360,8 @@ static void spapr_xive_class_init(ObjectClass *klass, void *data)
>      xrc->get_eas = spapr_xive_get_eas;
>      xrc->get_end = spapr_xive_get_end;
>      xrc->write_end = spapr_xive_write_end;
> +    xrc->get_nvt = spapr_xive_get_nvt;
> +    xrc->write_nvt = spapr_xive_write_nvt;
>  }
>  
>  static const TypeInfo spapr_xive_info = {

-- 
David Gibson			| I'll have my music baroque, and my code
david AT gibson.dropbear.id.au	| minimalist, thank you.  NOT _the_ _other_
				| _way_ _around_!
http://www.ozlabs.org/~dgibson

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

  reply	other threads:[~2018-12-10  5:19 UTC|newest]

Thread overview: 61+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-12-09 19:45 [Qemu-devel] [PATCH v7 00/19] ppc: support for the XIVE interrupt controller (POWER9) Cédric Le Goater
2018-12-09 19:45 ` [Qemu-devel] [PATCH v7 01/19] ppc/xive: add support for the END Event State Buffers Cédric Le Goater
2018-12-10  4:16   ` David Gibson
2018-12-10  7:11     ` Cédric Le Goater
2018-12-09 19:45 ` [Qemu-devel] [PATCH v7 02/19] ppc/xive: introduce the XIVE interrupt thread context Cédric Le Goater
2018-12-10  4:19   ` David Gibson
2018-12-09 19:45 ` [Qemu-devel] [PATCH v7 03/19] ppc/xive: introduce a simplified XIVE presenter Cédric Le Goater
2018-12-10  4:27   ` David Gibson
2018-12-10  7:15     ` Cédric Le Goater
2018-12-11  1:37       ` David Gibson
2018-12-11 10:43         ` Cédric Le Goater
2018-12-09 19:45 ` [Qemu-devel] [PATCH v7 04/19] ppc/xive: notify the CPU when the interrupt priority is more privileged Cédric Le Goater
2018-12-09 19:45 ` [Qemu-devel] [PATCH v7 05/19] spapr/xive: introduce a XIVE interrupt controller Cédric Le Goater
2018-12-10  4:36   ` David Gibson
2018-12-09 19:45 ` [Qemu-devel] [PATCH v7 06/19] spapr/xive: use the VCPU id as a NVT identifier Cédric Le Goater
2018-12-10  4:42   ` David Gibson [this message]
2018-12-09 19:45 ` [Qemu-devel] [PATCH v7 07/19] spapr: introduce a new machine IRQ backend for XIVE Cédric Le Goater
2018-12-10  4:45   ` David Gibson
2018-12-09 19:45 ` [Qemu-devel] [PATCH v7 08/19] spapr: add hcalls support for the XIVE exploitation interrupt mode Cédric Le Goater
2018-12-10  6:34   ` David Gibson
2018-12-09 19:46 ` [Qemu-devel] [PATCH v7 09/19] spapr: add device tree support for the XIVE exploitation mode Cédric Le Goater
2018-12-10  6:39   ` David Gibson
2018-12-10  7:53     ` Cédric Le Goater
2018-12-11  0:38       ` David Gibson
2018-12-11  9:06         ` Cédric Le Goater
2018-12-12  0:19           ` David Gibson
2018-12-12  7:37             ` Cédric Le Goater
2018-12-09 19:46 ` [Qemu-devel] [PATCH v7 10/19] spapr: allocate the interrupt thread context under the CPU core Cédric Le Goater
2018-12-09 19:46 ` [Qemu-devel] [PATCH v7 11/19] spapr: extend the sPAPR IRQ backend for XICS migration Cédric Le Goater
2018-12-09 19:46 ` [Qemu-devel] [PATCH v7 12/19] spapr: add a 'reset' method to the sPAPR IRQ backend Cédric Le Goater
2018-12-10  6:42   ` David Gibson
2018-12-10  7:30     ` Cédric Le Goater
2018-12-11 10:55     ` Cédric Le Goater
2018-12-09 19:46 ` [Qemu-devel] [PATCH v7 13/19] spapr: add an extra OV5 field " Cédric Le Goater
2018-12-09 19:46 ` [Qemu-devel] [PATCH v7 14/19] spapr: set the interrupt presenter at reset Cédric Le Goater
2018-12-11  1:46   ` David Gibson
2018-12-11 10:58     ` Cédric Le Goater
2018-12-09 19:46 ` [Qemu-devel] [PATCH v7 15/19] spapr/xive: enable XIVE MMIOs " Cédric Le Goater
2018-12-11  1:47   ` David Gibson
2018-12-11 10:14     ` Cédric Le Goater
2018-12-12  0:32       ` David Gibson
2018-12-09 19:46 ` [Qemu-devel] [PATCH v7 16/19] spapr: introduce a new sPAPR IRQ backend supporting XIVE and XICS Cédric Le Goater
2018-12-11  2:03   ` David Gibson
2018-12-11 10:19     ` Cédric Le Goater
2018-12-12  0:54       ` David Gibson
2018-12-12  9:13         ` Cédric Le Goater
2018-12-15  8:09           ` David Gibson
2018-12-09 19:46 ` [Qemu-devel] [PATCH v7 17/19] spapr: Add a pseries-4.0 machine type Cédric Le Goater
2018-12-09 22:05   ` Benjamin Herrenschmidt
2018-12-10  3:41     ` David Gibson
2018-12-10  7:09       ` Cédric Le Goater
2018-12-10  6:45   ` David Gibson
2018-12-09 19:46 ` [Qemu-devel] [PATCH v7 18/19] spapr: add a 'pseries-4.0-xive' " Cédric Le Goater
2018-12-10 22:17   ` Cédric Le Goater
2018-12-11  2:06     ` David Gibson
2018-12-11 10:42       ` Cédric Le Goater
2018-12-11 16:44         ` Cédric Le Goater
2018-12-15  8:03           ` David Gibson
2018-12-12  0:34         ` David Gibson
2018-12-12  7:26           ` Cédric Le Goater
2018-12-09 19:46 ` [Qemu-devel] [PATCH v7 19/19] spapr: add a 'pseries-4.0-dual' " Cédric Le Goater

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181210044217.GO4261@umbus.fritz.box \
    --to=david@gibson.dropbear.id.au \
    --cc=benh@kernel.crashing.org \
    --cc=clg@kaod.org \
    --cc=qemu-devel@nongnu.org \
    --cc=qemu-ppc@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).