qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Aaron Lindsay <aaron@os.amperecomputing.com>
To: "qemu-arm@nongnu.org" <qemu-arm@nongnu.org>,
	Peter Maydell <peter.maydell@linaro.org>,
	Alistair Francis <alistair.francis@xilinx.com>,
	Wei Huang <wei@redhat.com>,
	Peter Crosthwaite <crosthwaite.peter@gmail.com>,
	Richard Henderson <richard.henderson@linaro.org>
Cc: "qemu-devel@nongnu.org" <qemu-devel@nongnu.org>,
	Michael Spradling <mspradli@codeaurora.org>,
	Digant Desai <digantd@codeaurora.org>,
	Aaron Lindsay <aaron@os.amperecomputing.com>,
	Aaron Lindsay <alindsay@codeaurora.org>,
	Aaron Lindsay <aclindsa@gmail.com>
Subject: [Qemu-devel] [PATCH v10 02/14] target/arm: Reorganize PMCCNTR accesses
Date: Tue, 11 Dec 2018 15:20:14 +0000	[thread overview]
Message-ID: <20181211151945.29137-3-aaron@os.amperecomputing.com> (raw)
In-Reply-To: <20181211151945.29137-1-aaron@os.amperecomputing.com>

pmccntr_read and pmccntr_write contained duplicate code that was already
being handled by pmccntr_sync. Consolidate the duplicated code into two
functions: pmccntr_op_start and pmccntr_op_finish. Add a companion to
c15_ccnt in CPUARMState so that we can simultaneously save both the
architectural register value and the last underlying cycle count - this
ensures time isn't lost and will also allow us to access the 'old'
architectural register value in order to detect overflows in later
patches.

Signed-off-by: Aaron Lindsay <alindsay@codeaurora.org>
Signed-off-by: Aaron Lindsay <aclindsa@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/cpu.h    |  37 ++++++++++----
 target/arm/helper.c | 114 +++++++++++++++++++++++++++-----------------
 2 files changed, 98 insertions(+), 53 deletions(-)

diff --git a/target/arm/cpu.h b/target/arm/cpu.h
index 2a73fed9a0..61ac458627 100644
--- a/target/arm/cpu.h
+++ b/target/arm/cpu.h
@@ -468,10 +468,20 @@ typedef struct CPUARMState {
         uint64_t oslsr_el1; /* OS Lock Status */
         uint64_t mdcr_el2;
         uint64_t mdcr_el3;
-        /* If the counter is enabled, this stores the last time the counter
-         * was reset. Otherwise it stores the counter value
+        /* Stores the architectural value of the counter *the last time it was
+         * updated* by pmccntr_op_start. Accesses should always be surrounded
+         * by pmccntr_op_start/pmccntr_op_finish to guarantee the latest
+         * architecturally-correct value is being read/set.
          */
         uint64_t c15_ccnt;
+        /* Stores the delta between the architectural value and the underlying
+         * cycle count during normal operation. It is used to update c15_ccnt
+         * to be the correct architectural value before accesses. During
+         * accesses, c15_ccnt_delta contains the underlying count being used
+         * for the access, after which it reverts to the delta value in
+         * pmccntr_op_finish.
+         */
+        uint64_t c15_ccnt_delta;
         uint64_t pmccfiltr_el0; /* Performance Monitor Filter Register */
         uint64_t vpidr_el2; /* Virtualization Processor ID Register */
         uint64_t vmpidr_el2; /* Virtualization Multiprocessor ID Register */
@@ -956,15 +966,26 @@ int cpu_arm_signal_handler(int host_signum, void *pinfo,
                            void *puc);
 
 /**
- * pmccntr_sync
+ * pmccntr_op_start/finish
+ * @env: CPUARMState
+ *
+ * Convert the counter in the PMCCNTR between its delta form (the typical mode
+ * when it's enabled) and the guest-visible value. These two calls must always
+ * surround any action which might affect the counter.
+ */
+void pmccntr_op_start(CPUARMState *env);
+void pmccntr_op_finish(CPUARMState *env);
+
+/**
+ * pmu_op_start/finish
  * @env: CPUARMState
  *
- * Synchronises the counter in the PMCCNTR. This must always be called twice,
- * once before any action that might affect the timer and again afterwards.
- * The function is used to swap the state of the register if required.
- * This only happens when not in user mode (!CONFIG_USER_ONLY)
+ * Convert all PMU counters between their delta form (the typical mode when
+ * they are enabled) and the guest-visible values. These two calls must
+ * surround any action which might affect the counters.
  */
-void pmccntr_sync(CPUARMState *env);
+void pmu_op_start(CPUARMState *env);
+void pmu_op_finish(CPUARMState *env);
 
 /* SCTLR bit meanings. Several bits have been reused in newer
  * versions of the architecture; in that case we define constants
diff --git a/target/arm/helper.c b/target/arm/helper.c
index 0da1424f72..497907fc79 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -1085,28 +1085,63 @@ static inline bool arm_ccnt_enabled(CPUARMState *env)
 
     return true;
 }
-
-void pmccntr_sync(CPUARMState *env)
+/*
+ * Ensure c15_ccnt is the guest-visible count so that operations such as
+ * enabling/disabling the counter or filtering, modifying the count itself,
+ * etc. can be done logically. This is essentially a no-op if the counter is
+ * not enabled at the time of the call.
+ */
+void pmccntr_op_start(CPUARMState *env)
 {
-    uint64_t temp_ticks;
-
-    temp_ticks = muldiv64(qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL),
+    uint64_t cycles = 0;
+    cycles = muldiv64(qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL),
                           ARM_CPU_FREQ, NANOSECONDS_PER_SECOND);
 
-    if (env->cp15.c9_pmcr & PMCRD) {
-        /* Increment once every 64 processor clock cycles */
-        temp_ticks /= 64;
+    if (arm_ccnt_enabled(env)) {
+        uint64_t eff_cycles = cycles;
+        if (env->cp15.c9_pmcr & PMCRD) {
+            /* Increment once every 64 processor clock cycles */
+            eff_cycles /= 64;
+        }
+
+        env->cp15.c15_ccnt = eff_cycles - env->cp15.c15_ccnt_delta;
     }
+    env->cp15.c15_ccnt_delta = cycles;
+}
 
+/*
+ * If PMCCNTR is enabled, recalculate the delta between the clock and the
+ * guest-visible count. A call to pmccntr_op_finish should follow every call to
+ * pmccntr_op_start.
+ */
+void pmccntr_op_finish(CPUARMState *env)
+{
     if (arm_ccnt_enabled(env)) {
-        env->cp15.c15_ccnt = temp_ticks - env->cp15.c15_ccnt;
+        uint64_t prev_cycles = env->cp15.c15_ccnt_delta;
+
+        if (env->cp15.c9_pmcr & PMCRD) {
+            /* Increment once every 64 processor clock cycles */
+            prev_cycles /= 64;
+        }
+
+        env->cp15.c15_ccnt_delta = prev_cycles - env->cp15.c15_ccnt;
     }
 }
 
+void pmu_op_start(CPUARMState *env)
+{
+    pmccntr_op_start(env);
+}
+
+void pmu_op_finish(CPUARMState *env)
+{
+    pmccntr_op_finish(env);
+}
+
 static void pmcr_write(CPUARMState *env, const ARMCPRegInfo *ri,
                        uint64_t value)
 {
-    pmccntr_sync(env);
+    pmu_op_start(env);
 
     if (value & PMCRC) {
         /* The counter has been reset */
@@ -1117,26 +1152,16 @@ static void pmcr_write(CPUARMState *env, const ARMCPRegInfo *ri,
     env->cp15.c9_pmcr &= ~0x39;
     env->cp15.c9_pmcr |= (value & 0x39);
 
-    pmccntr_sync(env);
+    pmu_op_finish(env);
 }
 
 static uint64_t pmccntr_read(CPUARMState *env, const ARMCPRegInfo *ri)
 {
-    uint64_t total_ticks;
-
-    if (!arm_ccnt_enabled(env)) {
-        /* Counter is disabled, do not change value */
-        return env->cp15.c15_ccnt;
-    }
-
-    total_ticks = muldiv64(qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL),
-                           ARM_CPU_FREQ, NANOSECONDS_PER_SECOND);
-
-    if (env->cp15.c9_pmcr & PMCRD) {
-        /* Increment once every 64 processor clock cycles */
-        total_ticks /= 64;
-    }
-    return total_ticks - env->cp15.c15_ccnt;
+    uint64_t ret;
+    pmccntr_op_start(env);
+    ret = env->cp15.c15_ccnt;
+    pmccntr_op_finish(env);
+    return ret;
 }
 
 static void pmselr_write(CPUARMState *env, const ARMCPRegInfo *ri,
@@ -1153,22 +1178,9 @@ static void pmselr_write(CPUARMState *env, const ARMCPRegInfo *ri,
 static void pmccntr_write(CPUARMState *env, const ARMCPRegInfo *ri,
                         uint64_t value)
 {
-    uint64_t total_ticks;
-
-    if (!arm_ccnt_enabled(env)) {
-        /* Counter is disabled, set the absolute value */
-        env->cp15.c15_ccnt = value;
-        return;
-    }
-
-    total_ticks = muldiv64(qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL),
-                           ARM_CPU_FREQ, NANOSECONDS_PER_SECOND);
-
-    if (env->cp15.c9_pmcr & PMCRD) {
-        /* Increment once every 64 processor clock cycles */
-        total_ticks /= 64;
-    }
-    env->cp15.c15_ccnt = total_ticks - value;
+    pmccntr_op_start(env);
+    env->cp15.c15_ccnt = value;
+    pmccntr_op_finish(env);
 }
 
 static void pmccntr_write32(CPUARMState *env, const ARMCPRegInfo *ri,
@@ -1181,7 +1193,19 @@ static void pmccntr_write32(CPUARMState *env, const ARMCPRegInfo *ri,
 
 #else /* CONFIG_USER_ONLY */
 
-void pmccntr_sync(CPUARMState *env)
+void pmccntr_op_start(CPUARMState *env)
+{
+}
+
+void pmccntr_op_finish(CPUARMState *env)
+{
+}
+
+void pmu_op_start(CPUARMState *env)
+{
+}
+
+void pmu_op_finish(CPUARMState *env)
 {
 }
 
@@ -1190,9 +1214,9 @@ void pmccntr_sync(CPUARMState *env)
 static void pmccfiltr_write(CPUARMState *env, const ARMCPRegInfo *ri,
                             uint64_t value)
 {
-    pmccntr_sync(env);
+    pmccntr_op_start(env);
     env->cp15.pmccfiltr_el0 = value & 0xfc000000;
-    pmccntr_sync(env);
+    pmccntr_op_finish(env);
 }
 
 static void pmcntenset_write(CPUARMState *env, const ARMCPRegInfo *ri,
-- 
2.19.2

  parent reply	other threads:[~2018-12-11 15:20 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-12-11 15:20 [Qemu-devel] [PATCH v10 00/14] More fully implement ARM PMUv3 Aaron Lindsay
2018-12-11 15:20 ` [Qemu-devel] [PATCH v10 01/14] migration: Add post_save function to VMStateDescription Aaron Lindsay
2018-12-11 15:20 ` Aaron Lindsay [this message]
2018-12-11 15:20 ` [Qemu-devel] [PATCH v10 03/14] target/arm: Swap PMU values before/after migrations Aaron Lindsay
2018-12-11 15:20 ` [Qemu-devel] [PATCH v10 04/14] target/arm: Filter cycle counter based on PMCCFILTR_EL0 Aaron Lindsay
2018-12-11 15:20 ` [Qemu-devel] [PATCH v10 05/14] target/arm: Allow AArch32 access for PMCCFILTR Aaron Lindsay
2018-12-11 15:20 ` [Qemu-devel] [PATCH v10 06/14] target/arm: Implement PMOVSSET Aaron Lindsay
2018-12-11 15:20 ` [Qemu-devel] [PATCH v10 07/14] target/arm: Define FIELDs for ID_DFR0 Aaron Lindsay
2018-12-11 15:20 ` [Qemu-devel] [PATCH v10 08/14] target/arm: Make PMCEID[01]_EL0 64 bit registers, add PMCEID[23] Aaron Lindsay
2018-12-11 15:20 ` [Qemu-devel] [PATCH v10 09/14] target/arm: Add array for supported PMU events, generate PMCEID[01]_EL0 Aaron Lindsay
2018-12-11 15:20 ` [Qemu-devel] [PATCH v10 10/14] target/arm: Finish implementation of PM[X]EVCNTR and PM[X]EVTYPER Aaron Lindsay
2019-02-04 19:22   ` [Qemu-devel] [Qemu-arm] " Laurent Desnogues
2019-02-05 13:41     ` Aaron Lindsay OS
2019-02-05 13:54       ` Laurent Desnogues
2018-12-11 15:20 ` [Qemu-devel] [PATCH v10 11/14] target/arm: PMU: Add instruction and cycle events Aaron Lindsay
2018-12-11 15:20 ` [Qemu-devel] [PATCH v10 12/14] target/arm: PMU: Set PMCR.N to 4 Aaron Lindsay
2018-12-11 15:20 ` [Qemu-devel] [PATCH v10 13/14] target/arm: Implement PMSWINC Aaron Lindsay
2018-12-11 15:20 ` [Qemu-devel] [PATCH v10 14/14] target/arm: Send interrupts on PMU counter overflow Aaron Lindsay
2019-01-17 20:26   ` Richard Henderson
2019-01-18 21:40     ` Aaron Lindsay
2019-01-18 21:58       ` Richard Henderson
2019-01-11 16:22 ` [Qemu-devel] [PATCH v10 00/14] More fully implement ARM PMUv3 Aaron Lindsay
2019-01-18 14:13 ` Peter Maydell
2019-01-23 20:04   ` Aaron Lindsay OS

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181211151945.29137-3-aaron@os.amperecomputing.com \
    --to=aaron@os.amperecomputing.com \
    --cc=aclindsa@gmail.com \
    --cc=alindsay@codeaurora.org \
    --cc=alistair.francis@xilinx.com \
    --cc=crosthwaite.peter@gmail.com \
    --cc=digantd@codeaurora.org \
    --cc=mspradli@codeaurora.org \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-arm@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    --cc=richard.henderson@linaro.org \
    --cc=wei@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).