From: Kevin Wolf <kwolf@redhat.com>
To: qemu-block@nongnu.org
Cc: kwolf@redhat.com, peter.maydell@linaro.org, qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 04/41] dmg: exchanging hardcoded dmg UDIF block types to enum.
Date: Wed, 12 Dec 2018 14:26:58 +0100 [thread overview]
Message-ID: <20181212132735.16080-5-kwolf@redhat.com> (raw)
In-Reply-To: <20181212132735.16080-1-kwolf@redhat.com>
From: Julio Faracco <jcfaracco@gmail.com>
This change is better to understand what kind of block type is being
handled by the code. Using a syntax similar to the DMG documentation is
easier than tracking all hex values assigned to a block type.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
block/dmg.c | 43 ++++++++++++++++++++++++++++---------------
1 file changed, 28 insertions(+), 15 deletions(-)
diff --git a/block/dmg.c b/block/dmg.c
index 86bb2344ea..50e91aef6d 100644
--- a/block/dmg.c
+++ b/block/dmg.c
@@ -44,6 +44,19 @@ enum {
DMG_SECTORCOUNTS_MAX = DMG_LENGTHS_MAX / 512,
};
+enum {
+ /* DMG Block Type */
+ UDZE = 0, /* Zeroes */
+ UDRW, /* RAW type */
+ UDIG, /* Ignore */
+ UDCO = 0x80000004,
+ UDZO,
+ UDBZ,
+ ULFO,
+ UDCM = 0x7ffffffe, /* Comments */
+ UDLE /* Last Entry */
+};
+
static int dmg_probe(const uint8_t *buf, int buf_size, const char *filename)
{
int len;
@@ -108,16 +121,16 @@ static void update_max_chunk_size(BDRVDMGState *s, uint32_t chunk,
uint32_t uncompressed_sectors = 0;
switch (s->types[chunk]) {
- case 0x80000005: /* zlib compressed */
- case 0x80000006: /* bzip2 compressed */
- case 0x80000007: /* lzfse compressed */
+ case UDZO: /* zlib compressed */
+ case UDBZ: /* bzip2 compressed */
+ case ULFO: /* lzfse compressed */
compressed_size = s->lengths[chunk];
uncompressed_sectors = s->sectorcounts[chunk];
break;
- case 1: /* copy */
+ case UDRW: /* copy */
uncompressed_sectors = DIV_ROUND_UP(s->lengths[chunk], 512);
break;
- case 2: /* zero */
+ case UDIG: /* zero */
/* as the all-zeroes block may be large, it is treated specially: the
* sector is not copied from a large buffer, a simple memset is used
* instead. Therefore uncompressed_sectors does not need to be set. */
@@ -186,13 +199,13 @@ typedef struct DmgHeaderState {
static bool dmg_is_known_block_type(uint32_t entry_type)
{
switch (entry_type) {
- case 0x00000001: /* uncompressed */
- case 0x00000002: /* zeroes */
- case 0x80000005: /* zlib */
+ case UDRW: /* uncompressed */
+ case UDIG: /* zeroes */
+ case UDZO: /* zlib */
return true;
- case 0x80000006: /* bzip2 */
+ case UDBZ: /* bzip2 */
return !!dmg_uncompress_bz2;
- case 0x80000007: /* lzfse */
+ case ULFO: /* lzfse */
return !!dmg_uncompress_lzfse;
default:
return false;
@@ -586,7 +599,7 @@ static inline int dmg_read_chunk(BlockDriverState *bs, uint64_t sector_num)
s->current_chunk = s->n_chunks;
switch (s->types[chunk]) { /* block entry type */
- case 0x80000005: { /* zlib compressed */
+ case UDZO: { /* zlib compressed */
/* we need to buffer, because only the chunk as whole can be
* inflated. */
ret = bdrv_pread(bs->file, s->offsets[chunk],
@@ -609,7 +622,7 @@ static inline int dmg_read_chunk(BlockDriverState *bs, uint64_t sector_num)
return -1;
}
break; }
- case 0x80000006: /* bzip2 compressed */
+ case UDBZ: /* bzip2 compressed */
if (!dmg_uncompress_bz2) {
break;
}
@@ -630,7 +643,7 @@ static inline int dmg_read_chunk(BlockDriverState *bs, uint64_t sector_num)
return ret;
}
break;
- case 0x80000007:
+ case ULFO:
if (!dmg_uncompress_lzfse) {
break;
}
@@ -651,14 +664,14 @@ static inline int dmg_read_chunk(BlockDriverState *bs, uint64_t sector_num)
return ret;
}
break;
- case 1: /* copy */
+ case UDRW: /* copy */
ret = bdrv_pread(bs->file, s->offsets[chunk],
s->uncompressed_chunk, s->lengths[chunk]);
if (ret != s->lengths[chunk]) {
return -1;
}
break;
- case 2: /* zero */
+ case UDIG: /* zero */
/* see dmg_read, it is treated specially. No buffer needs to be
* pre-filled, the zeroes can be set directly. */
break;
--
2.19.2
next prev parent reply other threads:[~2018-12-12 13:28 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-12-12 13:26 [Qemu-devel] [PULL 00/41] Block layer patches Kevin Wolf
2018-12-12 13:26 ` [Qemu-devel] [PULL 01/41] block: adding lzfse decompressing support as a module Kevin Wolf
2018-12-12 13:26 ` [Qemu-devel] [PULL 02/41] configure: adding support to lzfse library Kevin Wolf
2018-12-12 13:26 ` [Qemu-devel] [PULL 03/41] dmg: including dmg-lzfse module inside dmg block driver Kevin Wolf
2018-12-12 13:26 ` Kevin Wolf [this message]
2018-12-12 13:26 ` [Qemu-devel] [PULL 05/41] block/replication: drop extra synchronization Kevin Wolf
2018-12-12 13:27 ` [Qemu-devel] [PULL 06/41] block/backup: drop unused synchronization interface Kevin Wolf
2018-12-12 13:27 ` [Qemu-devel] [PULL 07/41] qcow2: use Z_OK instead of 0 for deflateInit2 return code check Kevin Wolf
2018-12-12 13:27 ` [Qemu-devel] [PULL 08/41] qcow2: make more generic interface for qcow2_compress Kevin Wolf
2018-12-12 13:27 ` [Qemu-devel] [PULL 09/41] qcow2: move decompression from qcow2-cluster.c to qcow2.c Kevin Wolf
2018-12-12 13:27 ` [Qemu-devel] [PULL 10/41] qcow2: refactor decompress_buffer Kevin Wolf
2018-12-12 13:27 ` [Qemu-devel] [PULL 11/41] qcow2: use byte-based read in qcow2_decompress_cluster Kevin Wolf
2018-12-12 13:27 ` [Qemu-devel] [PULL 12/41] qcow2: aio support for compressed cluster read Kevin Wolf
2018-12-12 13:27 ` [Qemu-devel] [PULL 13/41] qcow2: do decompression in threads Kevin Wolf
2018-12-12 13:27 ` [Qemu-devel] [PULL 14/41] file-posix: Reorganise RawPosixAIOData Kevin Wolf
2018-12-12 13:27 ` [Qemu-devel] [PULL 15/41] file-posix: Factor out raw_thread_pool_submit() Kevin Wolf
2018-12-12 13:27 ` [Qemu-devel] [PULL 16/41] file-posix: Avoid aio_worker() for QEMU_AIO_TRUNCATE Kevin Wolf
2018-12-12 13:27 ` [Qemu-devel] [PULL 17/41] file-posix: Avoid aio_worker() for QEMU_AIO_COPY_RANGE Kevin Wolf
2018-12-12 13:27 ` [Qemu-devel] [PULL 18/41] file-posix: Avoid aio_worker() for QEMU_AIO_WRITE_ZEROES Kevin Wolf
2018-12-12 13:27 ` [Qemu-devel] [PULL 19/41] file-posix: Avoid aio_worker() for QEMU_AIO_DISCARD Kevin Wolf
2018-12-12 13:27 ` [Qemu-devel] [PULL 20/41] file-posix: Avoid aio_worker() for QEMU_AIO_FLUSH Kevin Wolf
2018-12-12 13:27 ` [Qemu-devel] [PULL 21/41] file-posix: Move read/write operation logic out of aio_worker() Kevin Wolf
2018-12-12 13:27 ` [Qemu-devel] [PULL 22/41] file-posix: Avoid aio_worker() for QEMU_AIO_READ/WRITE Kevin Wolf
2018-12-12 13:27 ` [Qemu-devel] [PULL 23/41] file-posix: Remove paio_submit_co() Kevin Wolf
2018-12-12 13:27 ` [Qemu-devel] [PULL 24/41] file-posix: Switch to .bdrv_co_ioctl Kevin Wolf
2018-12-12 13:27 ` [Qemu-devel] [PULL 25/41] file-posix: Avoid aio_worker() for QEMU_AIO_IOCTL Kevin Wolf
2018-12-12 13:27 ` [Qemu-devel] [PULL 26/41] block: Add bdrv_reopen_set_read_only() Kevin Wolf
2018-12-12 13:27 ` [Qemu-devel] [PULL 27/41] block: Use bdrv_reopen_set_read_only() in bdrv_backing_update_filename() Kevin Wolf
2018-12-12 13:27 ` [Qemu-devel] [PULL 28/41] block: Use bdrv_reopen_set_read_only() in commit_start/complete() Kevin Wolf
2018-12-12 13:27 ` [Qemu-devel] [PULL 29/41] block: Use bdrv_reopen_set_read_only() in bdrv_commit() Kevin Wolf
2018-12-12 13:27 ` [Qemu-devel] [PULL 30/41] block: Use bdrv_reopen_set_read_only() in stream_start/complete() Kevin Wolf
2018-12-12 13:27 ` [Qemu-devel] [PULL 31/41] block: Use bdrv_reopen_set_read_only() in qmp_change_backing_file() Kevin Wolf
2018-12-12 13:27 ` [Qemu-devel] [PULL 32/41] block: Use bdrv_reopen_set_read_only() in external_snapshot_commit() Kevin Wolf
2018-12-12 13:27 ` [Qemu-devel] [PULL 33/41] block: Use bdrv_reopen_set_read_only() in the mirror driver Kevin Wolf
2018-12-12 13:27 ` [Qemu-devel] [PULL 34/41] block: Drop bdrv_reopen() Kevin Wolf
2018-12-12 13:27 ` [Qemu-devel] [PULL 35/41] qemu-io: Put flag changes in the options QDict in reopen_f() Kevin Wolf
2018-12-12 13:27 ` [Qemu-devel] [PULL 36/41] block: Clean up reopen_backing_file() in block/replication.c Kevin Wolf
2018-12-12 13:27 ` [Qemu-devel] [PULL 37/41] block: Remove flags parameter from bdrv_reopen_queue() Kevin Wolf
2018-12-12 13:27 ` [Qemu-devel] [PULL 38/41] block: Stop passing flags to bdrv_reopen_queue_child() Kevin Wolf
2018-12-12 13:27 ` [Qemu-devel] [PULL 39/41] block: Remove assertions from update_flags_from_options() Kevin Wolf
2018-12-12 13:27 ` [Qemu-devel] [PULL 40/41] block: Assert that flags are up-to-date in bdrv_reopen_prepare() Kevin Wolf
2018-12-12 13:27 ` [Qemu-devel] [PULL 41/41] iotests: make 235 work on s390 (and others) Kevin Wolf
2018-12-14 10:19 ` [Qemu-devel] [PULL 00/41] Block layer patches Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181212132735.16080-5-kwolf@redhat.com \
--to=kwolf@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).