qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: David Gibson <david@gibson.dropbear.id.au>
To: peter.maydell@linaro.org
Cc: gkurz@kaod.org, clg@kaod.org, lvivier@redhat.com,
	spopovyc@redhat.com, qemu-ppc@nongnu.org, qemu-devel@nongnu.org,
	David Gibson <david@gibson.dropbear.id.au>
Subject: [Qemu-devel] [PULL 26/27] spapr/xive: introduce a XIVE interrupt controller
Date: Thu, 13 Dec 2018 15:01:25 +1100	[thread overview]
Message-ID: <20181213040126.6768-27-david@gibson.dropbear.id.au> (raw)
In-Reply-To: <20181213040126.6768-1-david@gibson.dropbear.id.au>

From: Cédric Le Goater <clg@kaod.org>

sPAPRXive models the XIVE interrupt controller of the sPAPR machine.
It inherits from the XiveRouter and provisions storage for the routing
tables :

  - Event Assignment Structure (EAS)
  - Event Notification Descriptor (END)

The sPAPRXive model incorporates an internal XiveSource for the IPIs
and for the interrupts of the virtual devices of the guest. This model
is consistent with XIVE architecture which also incorporates an
internal IVSE for IPIs and accelerator interrupts in the IVRE
sub-engine.

The sPAPRXive model exports two memory regions, one for the ESB
trigger and management pages used to control the sources and one for
the TIMA pages. They are mapped by default at the addresses found on
chip 0 of a baremetal system. This is also consistent with the XIVE
architecture which defines a Virtualization Controller BAR for the
internal IVSE ESB pages and a Thread Managment BAR for the TIMA.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
---
 default-configs/ppc64-softmmu.mak |   1 +
 hw/intc/Makefile.objs             |   1 +
 hw/intc/spapr_xive.c              | 366 ++++++++++++++++++++++++++++++
 include/hw/ppc/spapr_xive.h       |  45 ++++
 4 files changed, 413 insertions(+)
 create mode 100644 hw/intc/spapr_xive.c
 create mode 100644 include/hw/ppc/spapr_xive.h

diff --git a/default-configs/ppc64-softmmu.mak b/default-configs/ppc64-softmmu.mak
index 2d1e7c5c46..7f34ad0528 100644
--- a/default-configs/ppc64-softmmu.mak
+++ b/default-configs/ppc64-softmmu.mak
@@ -17,6 +17,7 @@ CONFIG_XICS=$(CONFIG_PSERIES)
 CONFIG_XICS_SPAPR=$(CONFIG_PSERIES)
 CONFIG_XICS_KVM=$(call land,$(CONFIG_PSERIES),$(CONFIG_KVM))
 CONFIG_XIVE=$(CONFIG_PSERIES)
+CONFIG_XIVE_SPAPR=$(CONFIG_PSERIES)
 CONFIG_MEM_DEVICE=y
 CONFIG_DIMM=y
 CONFIG_SPAPR_RNG=y
diff --git a/hw/intc/Makefile.objs b/hw/intc/Makefile.objs
index 72a46ed91c..301a8e972d 100644
--- a/hw/intc/Makefile.objs
+++ b/hw/intc/Makefile.objs
@@ -38,6 +38,7 @@ obj-$(CONFIG_XICS) += xics.o
 obj-$(CONFIG_XICS_SPAPR) += xics_spapr.o
 obj-$(CONFIG_XICS_KVM) += xics_kvm.o
 obj-$(CONFIG_XIVE) += xive.o
+obj-$(CONFIG_XIVE_SPAPR) += spapr_xive.o
 obj-$(CONFIG_POWERNV) += xics_pnv.o
 obj-$(CONFIG_ALLWINNER_A10_PIC) += allwinner-a10-pic.o
 obj-$(CONFIG_S390_FLIC) += s390_flic.o
diff --git a/hw/intc/spapr_xive.c b/hw/intc/spapr_xive.c
new file mode 100644
index 0000000000..eef5830d45
--- /dev/null
+++ b/hw/intc/spapr_xive.c
@@ -0,0 +1,366 @@
+/*
+ * QEMU PowerPC sPAPR XIVE interrupt controller model
+ *
+ * Copyright (c) 2017-2018, IBM Corporation.
+ *
+ * This code is licensed under the GPL version 2 or later. See the
+ * COPYING file in the top-level directory.
+ */
+
+#include "qemu/osdep.h"
+#include "qemu/log.h"
+#include "qapi/error.h"
+#include "qemu/error-report.h"
+#include "target/ppc/cpu.h"
+#include "sysemu/cpus.h"
+#include "monitor/monitor.h"
+#include "hw/ppc/spapr.h"
+#include "hw/ppc/spapr_xive.h"
+#include "hw/ppc/xive.h"
+#include "hw/ppc/xive_regs.h"
+
+/*
+ * XIVE Virtualization Controller BAR and Thread Managment BAR that we
+ * use for the ESB pages and the TIMA pages
+ */
+#define SPAPR_XIVE_VC_BASE   0x0006010000000000ull
+#define SPAPR_XIVE_TM_BASE   0x0006030203180000ull
+
+/*
+ * On sPAPR machines, use a simplified output for the XIVE END
+ * structure dumping only the information related to the OS EQ.
+ */
+static void spapr_xive_end_pic_print_info(sPAPRXive *xive, XiveEND *end,
+                                          Monitor *mon)
+{
+    uint32_t qindex = GETFIELD_BE32(END_W1_PAGE_OFF, end->w1);
+    uint32_t qgen = GETFIELD_BE32(END_W1_GENERATION, end->w1);
+    uint32_t qsize = GETFIELD_BE32(END_W0_QSIZE, end->w0);
+    uint32_t qentries = 1 << (qsize + 10);
+    uint32_t nvt = GETFIELD_BE32(END_W6_NVT_INDEX, end->w6);
+    uint8_t priority = GETFIELD_BE32(END_W7_F0_PRIORITY, end->w7);
+
+    monitor_printf(mon, "%3d/%d % 6d/%5d ^%d", nvt,
+                   priority, qindex, qentries, qgen);
+
+    xive_end_queue_pic_print_info(end, 6, mon);
+    monitor_printf(mon, "]");
+}
+
+void spapr_xive_pic_print_info(sPAPRXive *xive, Monitor *mon)
+{
+    XiveSource *xsrc = &xive->source;
+    int i;
+
+    monitor_printf(mon, "  LSIN         PQ    EISN     CPU/PRIO EQ\n");
+
+    for (i = 0; i < xive->nr_irqs; i++) {
+        uint8_t pq = xive_source_esb_get(xsrc, i);
+        XiveEAS *eas = &xive->eat[i];
+
+        if (!xive_eas_is_valid(eas)) {
+            continue;
+        }
+
+        monitor_printf(mon, "  %08x %s %c%c%c %s %08x ", i,
+                       xive_source_irq_is_lsi(xsrc, i) ? "LSI" : "MSI",
+                       pq & XIVE_ESB_VAL_P ? 'P' : '-',
+                       pq & XIVE_ESB_VAL_Q ? 'Q' : '-',
+                       xsrc->status[i] & XIVE_STATUS_ASSERTED ? 'A' : ' ',
+                       xive_eas_is_masked(eas) ? "M" : " ",
+                       (int) GETFIELD_BE64(EAS_END_DATA, eas->w));
+
+        if (!xive_eas_is_masked(eas)) {
+            uint32_t end_idx = GETFIELD_BE64(EAS_END_INDEX, eas->w);
+            XiveEND *end;
+
+            assert(end_idx < xive->nr_ends);
+            end = &xive->endt[end_idx];
+
+            if (xive_end_is_valid(end)) {
+                spapr_xive_end_pic_print_info(xive, end, mon);
+            }
+        }
+        monitor_printf(mon, "\n");
+    }
+}
+
+static void spapr_xive_map_mmio(sPAPRXive *xive)
+{
+    sysbus_mmio_map(SYS_BUS_DEVICE(xive), 0, xive->vc_base);
+    sysbus_mmio_map(SYS_BUS_DEVICE(xive), 1, xive->end_base);
+    sysbus_mmio_map(SYS_BUS_DEVICE(xive), 2, xive->tm_base);
+}
+
+static void spapr_xive_end_reset(XiveEND *end)
+{
+    memset(end, 0, sizeof(*end));
+
+    /* switch off the escalation and notification ESBs */
+    end->w1 = cpu_to_be32(END_W1_ESe_Q | END_W1_ESn_Q);
+}
+
+static void spapr_xive_reset(void *dev)
+{
+    sPAPRXive *xive = SPAPR_XIVE(dev);
+    int i;
+
+    /*
+     * The XiveSource has its own reset handler, which mask off all
+     * IRQs (!P|Q)
+     */
+
+    /* Mask all valid EASs in the IRQ number space. */
+    for (i = 0; i < xive->nr_irqs; i++) {
+        XiveEAS *eas = &xive->eat[i];
+        if (xive_eas_is_valid(eas)) {
+            eas->w = cpu_to_be64(EAS_VALID | EAS_MASKED);
+        } else {
+            eas->w = 0;
+        }
+    }
+
+    /* Clear all ENDs */
+    for (i = 0; i < xive->nr_ends; i++) {
+        spapr_xive_end_reset(&xive->endt[i]);
+    }
+}
+
+static void spapr_xive_instance_init(Object *obj)
+{
+    sPAPRXive *xive = SPAPR_XIVE(obj);
+
+    object_initialize(&xive->source, sizeof(xive->source), TYPE_XIVE_SOURCE);
+    object_property_add_child(obj, "source", OBJECT(&xive->source), NULL);
+
+    object_initialize(&xive->end_source, sizeof(xive->end_source),
+                      TYPE_XIVE_END_SOURCE);
+    object_property_add_child(obj, "end_source", OBJECT(&xive->end_source),
+                              NULL);
+}
+
+static void spapr_xive_realize(DeviceState *dev, Error **errp)
+{
+    sPAPRXive *xive = SPAPR_XIVE(dev);
+    XiveSource *xsrc = &xive->source;
+    XiveENDSource *end_xsrc = &xive->end_source;
+    Error *local_err = NULL;
+
+    if (!xive->nr_irqs) {
+        error_setg(errp, "Number of interrupt needs to be greater 0");
+        return;
+    }
+
+    if (!xive->nr_ends) {
+        error_setg(errp, "Number of interrupt needs to be greater 0");
+        return;
+    }
+
+    /*
+     * Initialize the internal sources, for IPIs and virtual devices.
+     */
+    object_property_set_int(OBJECT(xsrc), xive->nr_irqs, "nr-irqs",
+                            &error_fatal);
+    object_property_add_const_link(OBJECT(xsrc), "xive", OBJECT(xive),
+                                   &error_fatal);
+    object_property_set_bool(OBJECT(xsrc), true, "realized", &local_err);
+    if (local_err) {
+        error_propagate(errp, local_err);
+        return;
+    }
+
+    /*
+     * Initialize the END ESB source
+     */
+    object_property_set_int(OBJECT(end_xsrc), xive->nr_irqs, "nr-ends",
+                            &error_fatal);
+    object_property_add_const_link(OBJECT(end_xsrc), "xive", OBJECT(xive),
+                                   &error_fatal);
+    object_property_set_bool(OBJECT(end_xsrc), true, "realized", &local_err);
+    if (local_err) {
+        error_propagate(errp, local_err);
+        return;
+    }
+
+    /* Set the mapping address of the END ESB pages after the source ESBs */
+    xive->end_base = xive->vc_base + (1ull << xsrc->esb_shift) * xsrc->nr_irqs;
+
+    /*
+     * Allocate the routing tables
+     */
+    xive->eat = g_new0(XiveEAS, xive->nr_irqs);
+    xive->endt = g_new0(XiveEND, xive->nr_ends);
+
+    /* TIMA initialization */
+    memory_region_init_io(&xive->tm_mmio, OBJECT(xive), &xive_tm_ops, xive,
+                          "xive.tima", 4ull << TM_SHIFT);
+
+    /* Define all XIVE MMIO regions on SysBus */
+    sysbus_init_mmio(SYS_BUS_DEVICE(xive), &xsrc->esb_mmio);
+    sysbus_init_mmio(SYS_BUS_DEVICE(xive), &end_xsrc->esb_mmio);
+    sysbus_init_mmio(SYS_BUS_DEVICE(xive), &xive->tm_mmio);
+
+    /* Map all regions */
+    spapr_xive_map_mmio(xive);
+
+    qemu_register_reset(spapr_xive_reset, dev);
+}
+
+static int spapr_xive_get_eas(XiveRouter *xrtr, uint8_t eas_blk,
+                              uint32_t eas_idx, XiveEAS *eas)
+{
+    sPAPRXive *xive = SPAPR_XIVE(xrtr);
+
+    if (eas_idx >= xive->nr_irqs) {
+        return -1;
+    }
+
+    *eas = xive->eat[eas_idx];
+    return 0;
+}
+
+static int spapr_xive_get_end(XiveRouter *xrtr,
+                              uint8_t end_blk, uint32_t end_idx, XiveEND *end)
+{
+    sPAPRXive *xive = SPAPR_XIVE(xrtr);
+
+    if (end_idx >= xive->nr_ends) {
+        return -1;
+    }
+
+    memcpy(end, &xive->endt[end_idx], sizeof(XiveEND));
+    return 0;
+}
+
+static int spapr_xive_write_end(XiveRouter *xrtr, uint8_t end_blk,
+                                uint32_t end_idx, XiveEND *end,
+                                uint8_t word_number)
+{
+    sPAPRXive *xive = SPAPR_XIVE(xrtr);
+
+    if (end_idx >= xive->nr_ends) {
+        return -1;
+    }
+
+    memcpy(&xive->endt[end_idx], end, sizeof(XiveEND));
+    return 0;
+}
+
+static const VMStateDescription vmstate_spapr_xive_end = {
+    .name = TYPE_SPAPR_XIVE "/end",
+    .version_id = 1,
+    .minimum_version_id = 1,
+    .fields = (VMStateField []) {
+        VMSTATE_UINT32(w0, XiveEND),
+        VMSTATE_UINT32(w1, XiveEND),
+        VMSTATE_UINT32(w2, XiveEND),
+        VMSTATE_UINT32(w3, XiveEND),
+        VMSTATE_UINT32(w4, XiveEND),
+        VMSTATE_UINT32(w5, XiveEND),
+        VMSTATE_UINT32(w6, XiveEND),
+        VMSTATE_UINT32(w7, XiveEND),
+        VMSTATE_END_OF_LIST()
+    },
+};
+
+static const VMStateDescription vmstate_spapr_xive_eas = {
+    .name = TYPE_SPAPR_XIVE "/eas",
+    .version_id = 1,
+    .minimum_version_id = 1,
+    .fields = (VMStateField []) {
+        VMSTATE_UINT64(w, XiveEAS),
+        VMSTATE_END_OF_LIST()
+    },
+};
+
+static const VMStateDescription vmstate_spapr_xive = {
+    .name = TYPE_SPAPR_XIVE,
+    .version_id = 1,
+    .minimum_version_id = 1,
+    .fields = (VMStateField[]) {
+        VMSTATE_UINT32_EQUAL(nr_irqs, sPAPRXive, NULL),
+        VMSTATE_STRUCT_VARRAY_POINTER_UINT32(eat, sPAPRXive, nr_irqs,
+                                     vmstate_spapr_xive_eas, XiveEAS),
+        VMSTATE_STRUCT_VARRAY_POINTER_UINT32(endt, sPAPRXive, nr_ends,
+                                             vmstate_spapr_xive_end, XiveEND),
+        VMSTATE_END_OF_LIST()
+    },
+};
+
+static Property spapr_xive_properties[] = {
+    DEFINE_PROP_UINT32("nr-irqs", sPAPRXive, nr_irqs, 0),
+    DEFINE_PROP_UINT32("nr-ends", sPAPRXive, nr_ends, 0),
+    DEFINE_PROP_UINT64("vc-base", sPAPRXive, vc_base, SPAPR_XIVE_VC_BASE),
+    DEFINE_PROP_UINT64("tm-base", sPAPRXive, tm_base, SPAPR_XIVE_TM_BASE),
+    DEFINE_PROP_END_OF_LIST(),
+};
+
+static void spapr_xive_class_init(ObjectClass *klass, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+    XiveRouterClass *xrc = XIVE_ROUTER_CLASS(klass);
+
+    dc->desc    = "sPAPR XIVE Interrupt Controller";
+    dc->props   = spapr_xive_properties;
+    dc->realize = spapr_xive_realize;
+    dc->vmsd    = &vmstate_spapr_xive;
+
+    xrc->get_eas = spapr_xive_get_eas;
+    xrc->get_end = spapr_xive_get_end;
+    xrc->write_end = spapr_xive_write_end;
+}
+
+static const TypeInfo spapr_xive_info = {
+    .name = TYPE_SPAPR_XIVE,
+    .parent = TYPE_XIVE_ROUTER,
+    .instance_init = spapr_xive_instance_init,
+    .instance_size = sizeof(sPAPRXive),
+    .class_init = spapr_xive_class_init,
+};
+
+static void spapr_xive_register_types(void)
+{
+    type_register_static(&spapr_xive_info);
+}
+
+type_init(spapr_xive_register_types)
+
+bool spapr_xive_irq_claim(sPAPRXive *xive, uint32_t lisn, bool lsi)
+{
+    XiveSource *xsrc = &xive->source;
+
+    if (lisn >= xive->nr_irqs) {
+        return false;
+    }
+
+    xive->eat[lisn].w |= cpu_to_be64(EAS_VALID);
+    xive_source_irq_set(xsrc, lisn, lsi);
+    return true;
+}
+
+bool spapr_xive_irq_free(sPAPRXive *xive, uint32_t lisn)
+{
+    XiveSource *xsrc = &xive->source;
+
+    if (lisn >= xive->nr_irqs) {
+        return false;
+    }
+
+    xive->eat[lisn].w &= cpu_to_be64(~EAS_VALID);
+    xive_source_irq_set(xsrc, lisn, false);
+    return true;
+}
+
+qemu_irq spapr_xive_qirq(sPAPRXive *xive, uint32_t lisn)
+{
+    XiveSource *xsrc = &xive->source;
+
+    if (lisn >= xive->nr_irqs) {
+        return NULL;
+    }
+
+    /* The sPAPR machine/device should have claimed the IRQ before */
+    assert(xive_eas_is_valid(&xive->eat[lisn]));
+
+    return xive_source_qirq(xsrc, lisn);
+}
diff --git a/include/hw/ppc/spapr_xive.h b/include/hw/ppc/spapr_xive.h
new file mode 100644
index 0000000000..f087959b99
--- /dev/null
+++ b/include/hw/ppc/spapr_xive.h
@@ -0,0 +1,45 @@
+/*
+ * QEMU PowerPC sPAPR XIVE interrupt controller model
+ *
+ * Copyright (c) 2017-2018, IBM Corporation.
+ *
+ * This code is licensed under the GPL version 2 or later. See the
+ * COPYING file in the top-level directory.
+ */
+
+#ifndef PPC_SPAPR_XIVE_H
+#define PPC_SPAPR_XIVE_H
+
+#include "hw/ppc/xive.h"
+
+#define TYPE_SPAPR_XIVE "spapr-xive"
+#define SPAPR_XIVE(obj) OBJECT_CHECK(sPAPRXive, (obj), TYPE_SPAPR_XIVE)
+
+typedef struct sPAPRXive {
+    XiveRouter    parent;
+
+    /* Internal interrupt source for IPIs and virtual devices */
+    XiveSource    source;
+    hwaddr        vc_base;
+
+    /* END ESB MMIOs */
+    XiveENDSource end_source;
+    hwaddr        end_base;
+
+    /* Routing table */
+    XiveEAS       *eat;
+    uint32_t      nr_irqs;
+    XiveEND       *endt;
+    uint32_t      nr_ends;
+
+    /* TIMA mapping address */
+    hwaddr        tm_base;
+    MemoryRegion  tm_mmio;
+} sPAPRXive;
+
+bool spapr_xive_irq_claim(sPAPRXive *xive, uint32_t lisn, bool lsi);
+bool spapr_xive_irq_free(sPAPRXive *xive, uint32_t lisn);
+void spapr_xive_pic_print_info(sPAPRXive *xive, Monitor *mon);
+qemu_irq spapr_xive_qirq(sPAPRXive *xive, uint32_t lisn);
+
+#endif /* PPC_SPAPR_XIVE_H */
-- 
2.19.2

  parent reply	other threads:[~2018-12-13  4:02 UTC|newest]

Thread overview: 38+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-12-13  4:00 [Qemu-devel] [PULL 00/27] ppc-for-4.0 queue 20181213 David Gibson
2018-12-13  4:01 ` [Qemu-devel] [PULL 01/27] spapr: Fix ibm, max-associativity-domains property number of nodes David Gibson
2018-12-13  4:01 ` [Qemu-devel] [PULL 02/27] target/ppc: tcg: Implement addex instruction David Gibson
2018-12-13  4:01 ` [Qemu-devel] [PULL 03/27] spapr: drop redundant statement in spapr_populate_drconf_memory() David Gibson
2018-12-13  4:01 ` [Qemu-devel] [PULL 04/27] target/ppc: use g_new(T, n) instead of g_malloc(sizeof(T) * n) David Gibson
2018-12-13  4:01 ` [Qemu-devel] [PULL 05/27] spapr: " David Gibson
2018-12-13  4:01 ` [Qemu-devel] [PULL 06/27] ppc405_boards: " David Gibson
2018-12-13  4:01 ` [Qemu-devel] [PULL 07/27] ppc405_uc: " David Gibson
2018-12-13  4:01 ` [Qemu-devel] [PULL 08/27] ppc440_bamboo: " David Gibson
2018-12-13  4:01 ` [Qemu-devel] [PULL 09/27] sam460ex: " David Gibson
2018-12-13  4:01 ` [Qemu-devel] [PULL 10/27] virtex_ml507: " David Gibson
2018-12-13  4:01 ` [Qemu-devel] [PULL 11/27] mac_newworld: simplify IRQ wiring David Gibson
2018-12-13  4:01 ` [Qemu-devel] [PULL 12/27] e500: " David Gibson
2018-12-13  4:01 ` [Qemu-devel] [PULL 13/27] ppc/xive: introduce a XIVE interrupt source model David Gibson
2018-12-13  4:01 ` [Qemu-devel] [PULL 14/27] ppc/xive: add support for the LSI interrupt sources David Gibson
2018-12-13  4:01 ` [Qemu-devel] [PULL 15/27] ppc/xive: introduce the XiveNotifier interface David Gibson
2018-12-13  4:01 ` [Qemu-devel] [PULL 16/27] ppc/xive: introduce the XiveRouter model David Gibson
2018-12-13  4:01 ` [Qemu-devel] [PULL 17/27] ppc/xive: introduce the XIVE Event Notification Descriptors David Gibson
2018-12-13  4:01 ` [Qemu-devel] [PULL 18/27] spapr: initialize VSMT before initializing the IRQ backend David Gibson
2018-12-13  4:01 ` [Qemu-devel] [PULL 19/27] spapr: introduce a spapr_irq_init() routine David Gibson
2018-12-13  4:01 ` [Qemu-devel] [PULL 20/27] spapr: export and rename the xics_max_server_number() routine David Gibson
2018-12-13  4:01 ` [Qemu-devel] [PULL 21/27] Changes requirement for "vsubsbs" instruction David Gibson
2018-12-13  4:01 ` [Qemu-devel] [PULL 22/27] ppc/xive: add support for the END Event State Buffers David Gibson
2018-12-13  4:01 ` [Qemu-devel] [PULL 23/27] ppc/xive: introduce the XIVE interrupt thread context David Gibson
2018-12-13  4:01 ` [Qemu-devel] [PULL 24/27] ppc/xive: introduce a simplified XIVE presenter David Gibson
2018-12-13  4:01 ` [Qemu-devel] [PULL 25/27] ppc/xive: notify the CPU when the interrupt priority is more privileged David Gibson
2018-12-13  4:01 ` David Gibson [this message]
2018-12-13  4:01 ` [Qemu-devel] [PULL 27/27] spapr/xive: use the VCPU id as a NVT identifier David Gibson
2018-12-13  7:43 ` [Qemu-devel] [PULL 00/27] ppc-for-4.0 queue 20181213 no-reply
2018-12-13 12:08   ` David Gibson
2018-12-13 12:57     ` Cédric Le Goater
2018-12-14 16:03 ` Peter Maydell
2018-12-14 17:49   ` Cédric Le Goater
2018-12-17  1:03     ` David Gibson
2018-12-17  7:41       ` [Qemu-devel] [Qemu-ppc] " Howard Spoelstra
2018-12-17  8:04       ` [Qemu-devel] " Cédric Le Goater
2018-12-17 10:11         ` Cédric Le Goater
2018-12-15  9:09   ` David Gibson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181213040126.6768-27-david@gibson.dropbear.id.au \
    --to=david@gibson.dropbear.id.au \
    --cc=clg@kaod.org \
    --cc=gkurz@kaod.org \
    --cc=lvivier@redhat.com \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    --cc=qemu-ppc@nongnu.org \
    --cc=spopovyc@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).