From: Paolo Bonzini <pbonzini@redhat.com>
To: qemu-devel@nongnu.org
Subject: [Qemu-devel] [PATCH 0/2] Fix TABs in many files
Date: Thu, 13 Dec 2018 23:37:35 +0100 [thread overview]
Message-ID: <20181213223737.11793-1-pbonzini@redhat.com> (raw)
Space-tab sequences at the beginning of the line are always a mistake,
so patch 1 fixes them. I am not touching space-tab in the middle of
the line, many of which are in #define lines.
In addition, about a third of the files with TABs have only a few of
them and it's worth converting them for consistency. Of the files
touched by patch 2, hw/ide/core.c is the worst in absolute terms, with
over 50 occurrences in a 3000 lines file; hw/char/xen_console.c has
about a third TABs and two-thirds spaces but it is small so I included it.
The files were selected by hand starting from a list of .c and .h
files in the tree, sorted by number of occurrences. I left out
files that for example were using TABs consistently for structs,
on the grounds that those were probably copied from Linux. I also
left out slirp from patch 2 because I did not want to complicate the
ongoing surgery to extract it from QEMU.
Thanks,
Paolo
Paolo Bonzini (2):
remove space-tab sequences
avoid TABs in files that only contain a few
block/bochs.c | 22 ++---
block/file-posix.c | 2 +-
block/file-win32.c | 8 +-
block/linux-aio.c | 4 +-
block/qcow2-cluster.c | 2 +-
block/vpc.c | 2 +-
bsd-user/elfload.c | 2 +-
bsd-user/x86_64/target_syscall.h | 2 +-
contrib/elf2dmp/main.c | 2 +-
crypto/aes.c | 28 +++----
disas/alpha.c | 8 +-
disas/arm.c | 2 +-
disas/i386.c | 4 +-
disas/m68k.c | 4 +-
hw/alpha/typhoon.c | 12 +--
hw/arm/stellaris.c | 2 +-
hw/arm/virt.c | 2 +-
hw/char/sh_serial.c | 18 ++---
hw/char/virtio-serial-bus.c | 2 +-
hw/char/xen_console.c | 58 ++++++-------
hw/core/loader.c | 28 +++----
hw/display/tc6393xb.c | 6 +-
hw/display/vga.c | 8 +-
hw/display/virtio-gpu-3d.c | 6 +-
hw/dma/pxa2xx_dma.c | 4 +-
hw/dma/soc_dma.c | 2 +-
hw/gpio/max7310.c | 2 +-
hw/i386/xen/xen-hvm.c | 4 +-
hw/ide/core.c | 94 +++++++++++-----------
hw/input/lm832x.c | 2 +-
hw/input/pckbd.c | 2 +-
hw/input/tsc210x.c | 2 +-
hw/intc/apic.c | 2 +-
hw/mips/gt64xxx_pci.c | 6 +-
hw/mips/mips_r4k.c | 4 +-
hw/misc/max111x.c | 6 +-
hw/misc/omap_l4.c | 4 +-
hw/net/mipsnet.c | 16 ++--
hw/net/ne2000.c | 44 +++++-----
hw/net/rocker/rocker.c | 2 +-
hw/net/virtio-net.c | 4 +-
hw/net/vmxnet3.c | 6 +-
hw/pci/msix.c | 2 +-
hw/pci/pci.c | 44 +++++-----
hw/pci/pci_bridge.c | 2 +-
hw/ppc/ppc405_uc.c | 2 +-
hw/ppc/prep.c | 4 +-
hw/scsi/lsi53c895a.c | 6 +-
hw/sh4/r2d.c | 16 ++--
hw/usb/dev-bluetooth.c | 2 +-
hw/usb/dev-hid.c | 6 +-
hw/usb/dev-hub.c | 14 ++--
hw/usb/hcd-uhci.c | 4 +-
hw/xen/xen_devconfig.c | 2 +-
hw/xenpv/xen_domainbuild.c | 8 +-
include/elf.h | 10 +--
include/hw/acpi/acpi.h | 14 ++--
include/hw/elf_ops.h | 2 +-
include/hw/ide/internal.h | 2 +-
include/hw/sh4/sh_intc.h | 20 ++---
include/hw/xen/io/ring.h | 4 +-
include/qemu/acl.h | 14 ++--
include/qemu/iov.h | 2 +-
include/scsi/constants.h | 2 +-
include/sysemu/balloon.h | 2 +-
linux-user/linuxload.c | 14 ++--
linux-user/main.c | 4 +-
linux-user/mmap.c | 10 +--
linux-user/qemu.h | 4 +-
linux-user/signal.c | 16 ++--
linux-user/strace.c | 4 +-
linux-user/syscall.c | 2 +-
linux-user/syscall_defs.h | 4 +-
linux-user/uaccess.c | 2 +-
linux-user/vm86.c | 2 +-
linux-user/x86_64/target_syscall.h | 2 +-
nbd/client.c | 2 +-
net/checksum.c | 2 +-
qtest.c | 4 +-
slirp/ip_input.c | 4 +-
slirp/tcp_input.c | 10 +--
slirp/tcp_output.c | 4 +-
slirp/tcp_timer.c | 2 +-
slirp/udp.c | 2 +-
target/alpha/translate.c | 2 +-
target/cris/helper.c | 2 +-
target/cris/mmu.h | 10 +--
target/cris/translate_v10.inc.c | 2 +-
target/i386/translate.c | 12 +--
target/mips/translate.c | 2 +-
target/tilegx/translate.c | 2 +-
tcg/i386/tcg-target.inc.c | 4 +-
tests/tcg/alpha/test-cond.c | 4 +-
tests/tcg/arm/hello-arm.c | 20 ++---
tests/tcg/cris/check_glibc_kernelversion.c | 8 +-
tests/tcg/cris/check_mmap3.c | 2 +-
tests/tcg/cris/check_openpf1.c | 2 +-
tests/tcg/cris/check_settls1.c | 2 +-
tests/tcg/i386/hello-i386.c | 14 ++--
tests/tcg/mips/hello-mips.c | 10 +--
tests/tcg/multiarch/sha1.c | 12 +--
tests/vhost-user-test.c | 4 +-
ui/keymaps.h | 4 +-
ui/qemu-pixman.c | 2 +-
ui/vnc-enc-zywrle-template.c | 4 +-
ui/vnc.c | 4 +-
util/bitops.c | 4 +-
util/osdep.c | 4 +-
util/qemu-sockets.c | 4 +-
109 files changed, 429 insertions(+), 429 deletions(-)
--
2.19.2
next reply other threads:[~2018-12-13 22:37 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-12-13 22:37 Paolo Bonzini [this message]
2018-12-13 22:37 ` [Qemu-devel] [PATCH 1/2] remove space-tab sequences Paolo Bonzini
2018-12-13 22:51 ` Richard Henderson
2018-12-14 6:08 ` Markus Armbruster
2018-12-13 22:37 ` [Qemu-devel] [PATCH 2/2] avoid TABs in files that only contain a few Paolo Bonzini
2018-12-13 22:52 ` Richard Henderson
2018-12-13 23:20 ` David Gibson
2018-12-14 1:33 ` Michael S. Tsirkin
2018-12-14 10:22 ` Daniel P. Berrangé
2018-12-14 11:35 ` Paolo Bonzini
2018-12-14 10:54 ` [Qemu-devel] [SPAM] [Qemu-ppc] " Greg Kurz
2018-12-14 13:34 ` [Qemu-devel] " Peter Maydell
2018-12-14 14:02 ` Alex Bennée
2018-12-14 15:16 ` Stefan Hajnoczi
2018-12-14 15:17 ` Michael S. Tsirkin
2018-12-14 17:19 ` Aleksandar Markovic
2018-12-14 20:16 ` Eric Blake
2018-12-17 9:09 ` Stefan Markovic
2018-12-14 13:40 ` [Qemu-devel] [PATCH 0/2] Fix TABs in many files Wainer dos Santos Moschetta
2018-12-22 17:48 ` no-reply
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181213223737.11793-1-pbonzini@redhat.com \
--to=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).