From: "Michael S. Tsirkin" <mst@redhat.com>
To: qemu-devel@nongnu.org
Cc: Peter Maydell <peter.maydell@linaro.org>,
Igor Mammedov <imammedo@redhat.com>,
Ard Biesheuvel <ard.biesheuvel@linaro.org>,
Shannon Zhao <shannon.zhaosl@gmail.com>,
Andrew Jones <drjones@redhat.com>,
Samuel Ortiz <sameo@linux.intel.com>,
qemu-arm@nongnu.org
Subject: [Qemu-devel] [PULL v3 23/44] hw: arm: acpi: Fix incorrect checksums in RSDP
Date: Thu, 20 Dec 2018 13:39:37 -0500 [thread overview]
Message-ID: <20181220183059.20726-24-mst@redhat.com> (raw)
In-Reply-To: <20181220183059.20726-1-mst@redhat.com>
From: Igor Mammedov <imammedo@redhat.com>
When RSDP table was introduced (d4bec5d87), we calculated only legacy
checksum, and that was incorrect as it
- specified rev=2 and forgot about extended checksum.
- legacy checksum calculated on full table instead of the 1st 20 bytes
Fix it by adding extended checksum calculation and using correct
size for legacy checksum.
While at it use explicit constants to specify sub/full tables
sizes instead of relying on AcpiRsdpDescriptor size and fields offsets.
The follow up commits will convert this table to build_append_int_noprefix() API,
will use constants anyway and remove unused AcpiRsdpDescriptor structure.
Based on "[PATCH v5 05/24] hw: acpi: Implement XSDT support for RSDP"
by Samuel Ortiz, who did it right in his impl.
Fixes: d4bec5d87 ("hw/arm/virt-acpi-build: Generate RSDP table")
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
CC: Ard Biesheuvel <ard.biesheuvel@linaro.org>
CC: Shannon Zhao <shannon.zhaosl@gmail.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
hw/arm/virt-acpi-build.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c
index fcaa350892..0835900052 100644
--- a/hw/arm/virt-acpi-build.c
+++ b/hw/arm/virt-acpi-build.c
@@ -390,8 +390,13 @@ build_rsdp(GArray *rsdp_table, BIOSLinker *linker, unsigned xsdt_tbl_offset)
/* Checksum to be filled by Guest linker */
bios_linker_loader_add_checksum(linker, ACPI_BUILD_RSDP_FILE,
- (char *)rsdp - rsdp_table->data, sizeof *rsdp,
+ (char *)rsdp - rsdp_table->data, 20 /* ACPI rev 1.0 RSDP size */,
(char *)&rsdp->checksum - rsdp_table->data);
+
+ /* Extended checksum to be filled by Guest linker */
+ bios_linker_loader_add_checksum(linker, ACPI_BUILD_RSDP_FILE,
+ (char *)rsdp - rsdp_table->data, 36 /* ACPI rev 2.0 RSDP size */,
+ (char *)&rsdp->extended_checksum - rsdp_table->data);
}
static void
--
MST
next prev parent reply other threads:[~2018-12-20 18:40 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-12-20 18:37 [Qemu-devel] [PULL v3 00/44] pci, pc, virtio: fixes, features Michael S. Tsirkin
2018-12-20 18:37 ` [Qemu-devel] [PULL v3 01/44] pcie: set link state inactive/active after hot unplug/plug Michael S. Tsirkin
2018-12-20 18:37 ` [Qemu-devel] [PULL v3 02/44] pc:piix4: Update smbus I/O space after a migration Michael S. Tsirkin
2018-12-20 18:37 ` [Qemu-devel] [PULL v3 03/44] virtio: Helper for registering virtio device types Michael S. Tsirkin
2018-12-20 18:37 ` [Qemu-devel] [PULL v3 04/44] virtio: Provide version-specific variants of virtio PCI devices Michael S. Tsirkin
2018-12-20 18:37 ` [Qemu-devel] [PULL v3 05/44] tests: Remove unused include Michael S. Tsirkin
2018-12-20 18:37 ` [Qemu-devel] [PULL v3 06/44] hw/smbios: Restrict access to "hw/smbios/ipmi.h" Michael S. Tsirkin
2018-12-20 18:38 ` [Qemu-devel] [PULL v3 07/44] hw/smbios: Remove "smbios_ipmi.h" Michael S. Tsirkin
2018-12-20 18:38 ` [Qemu-devel] [PULL v3 08/44] hw/smbios: Move to the hw/firmware/ subdirectory Michael S. Tsirkin
2018-12-20 18:38 ` [Qemu-devel] [PULL v3 09/44] hw/pci-bridge: Fix invalid free() Michael S. Tsirkin
2018-12-20 18:38 ` [Qemu-devel] [PULL v3 10/44] pcie: Create enums for link speed and width Michael S. Tsirkin
2018-12-20 18:38 ` [Qemu-devel] [PULL v3 11/44] pci: Sync PCIe downstream port LNKSTA on read Michael S. Tsirkin
2018-12-20 18:38 ` [Qemu-devel] [PULL v3 12/44] qapi: Define PCIe link speed and width properties Michael S. Tsirkin
2018-12-20 18:38 ` [Qemu-devel] [PULL v3 13/44] pcie: Add link speed and width fields to PCIESlot Michael S. Tsirkin
2018-12-20 18:38 ` [Qemu-devel] [PULL v3 14/44] pcie: Fill PCIESlot link fields to support higher speeds and widths Michael S. Tsirkin
2018-12-20 18:38 ` [Qemu-devel] [PULL v3 15/44] pcie: Allow generic PCIe root port to specify link speed and width Michael S. Tsirkin
2018-12-20 18:38 ` [Qemu-devel] [PULL v3 16/44] vfio/pci: Remove PCIe Link Status emulation Michael S. Tsirkin
2018-12-20 18:39 ` [Qemu-devel] [PULL v3 17/44] pcie: Fast PCIe root ports for new machines Michael S. Tsirkin
2018-12-20 18:39 ` [Qemu-devel] [PULL v3 18/44] intel_iommu: dump correct iova when failed Michael S. Tsirkin
2018-12-20 18:39 ` [Qemu-devel] [PULL v3 19/44] intel_iommu: convert invalid traces into error reports Michael S. Tsirkin
2018-12-20 18:39 ` [Qemu-devel] [PULL v3 20/44] intel_iommu: dma read/write draining support Michael S. Tsirkin
2018-12-20 18:39 ` [Qemu-devel] [PULL v3 21/44] intel_iommu: remove "x-" prefix for "aw-bits" Michael S. Tsirkin
2018-12-20 18:39 ` [Qemu-devel] [PULL v3 22/44] hw: acpi: The RSDP build API can return void Michael S. Tsirkin
2018-12-20 18:39 ` Michael S. Tsirkin [this message]
2018-12-20 18:39 ` [Qemu-devel] [PULL v3 24/44] hw: i386: Use correct RSDT length for checksum Michael S. Tsirkin
2018-12-20 18:39 ` [Qemu-devel] [PULL v3 25/44] hw: arm: Carry RSDP specific data through AcpiRsdpData Michael S. Tsirkin
2018-12-20 18:39 ` [Qemu-devel] [PULL v3 26/44] hw: arm: Convert the RSDP build to the buid_append_foo() API Michael S. Tsirkin
2018-12-20 18:39 ` [Qemu-devel] [PULL v3 27/44] hw: arm: Support both legacy and current RSDP build Michael S. Tsirkin
2018-12-20 18:39 ` [Qemu-devel] [PULL v3 28/44] hw: acpi: Export and share the ARM " Michael S. Tsirkin
2018-12-20 18:39 ` [Qemu-devel] [PULL v3 29/44] hw: acpi: Remove AcpiRsdpDescriptor and fix tests Michael S. Tsirkin
2018-12-20 18:39 ` [Qemu-devel] [PULL v3 30/44] hw/i386: Remove deprecated machines pc-0.10 and pc-0.11 Michael S. Tsirkin
2018-12-20 18:39 ` [Qemu-devel] [PULL v3 31/44] pci/pcie: rename hotplug handler callbacks Michael S. Tsirkin
2018-12-20 18:39 ` [Qemu-devel] [PULL v3 32/44] pci/shpc: " Michael S. Tsirkin
2018-12-20 18:39 ` [Qemu-devel] [PULL v3 33/44] s390x/pci: " Michael S. Tsirkin
2018-12-20 18:40 ` [Qemu-devel] [PULL v3 34/44] pci/pcihp: perform check for bus capability in pre_plug handler Michael S. Tsirkin
2018-12-20 18:40 ` [Qemu-devel] [PULL v3 35/44] pci/pcihp: overwrite hotplug handler recursively from the start Michael S. Tsirkin
2018-12-20 18:40 ` [Qemu-devel] [PULL v3 36/44] pci/pcihp: perform unplug via the hotplug handler Michael S. Tsirkin
2018-12-20 18:40 ` [Qemu-devel] [PULL v3 37/44] pci/pcie: " Michael S. Tsirkin
2018-12-20 18:40 ` [Qemu-devel] [PULL v3 38/44] pci: Reuse pci-bridge hotplug handler handlers for pcie-pci-bridge Michael S. Tsirkin
2018-12-20 18:40 ` [Qemu-devel] [PULL v3 39/44] pci/shpc: perform unplug via the hotplug handler Michael S. Tsirkin
2018-12-20 18:40 ` [Qemu-devel] [PULL v3 40/44] spapr_pci: " Michael S. Tsirkin
2018-12-20 18:40 ` [Qemu-devel] [PULL v3 41/44] pci: Adjust PCI config limit based on bus topology Michael S. Tsirkin
2018-12-20 18:40 ` [Qemu-devel] [PULL v3 42/44] q35: set split kernel irqchip as default Michael S. Tsirkin
2018-12-20 18:40 ` [Qemu-devel] [PULL v3 43/44] x86-iommu: switch intr_supported to OnOffAuto type Michael S. Tsirkin
2018-12-20 18:40 ` [Qemu-devel] [PULL v3 44/44] x86-iommu: turn on IR by default if proper Michael S. Tsirkin
2018-12-21 15:49 ` [Qemu-devel] [PULL v3 00/44] pci, pc, virtio: fixes, features Peter Maydell
2018-12-26 4:41 ` no-reply
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181220183059.20726-24-mst@redhat.com \
--to=mst@redhat.com \
--cc=ard.biesheuvel@linaro.org \
--cc=drjones@redhat.com \
--cc=imammedo@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-arm@nongnu.org \
--cc=qemu-devel@nongnu.org \
--cc=sameo@linux.intel.com \
--cc=shannon.zhaosl@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).