From: "Philippe Mathieu-Daudé" <philmd@redhat.com>
To: qemu-devel@nongnu.org, Thomas Huth <thuth@redhat.com>
Cc: "Philippe Mathieu-Daudé" <f4bug@amsat.org>,
"Edgar E. Iglesias" <edgar.iglesias@gmail.com>,
"Magnus Damm" <magnus.damm@gmail.com>,
"David Gibson" <david@gibson.dropbear.id.au>,
"Andrew Jeffery" <andrew@aj.id.au>,
qemu-arm@nongnu.org, qemu-ppc@nongnu.org,
"Joel Stanley" <joel@jms.id.au>,
"Peter Maydell" <peter.maydell@linaro.org>,
"Andrzej Zaborowski" <balrogg@gmail.com>,
"Igor Mitsyanko" <i.mitsyanko@gmail.com>,
"Beniamino Galvani" <b.galvani@gmail.com>,
"Michael Walle" <michael@walle.cc>,
"Richard Henderson" <rth@twiddle.net>,
"Jan Kiszka" <jan.kiszka@web.de>,
"Jason Wang" <jasowang@redhat.com>,
"Gerd Hoffmann" <kraxel@redhat.com>,
"Peter Chubb" <peter.chubb@nicta.com.au>,
"Aurelien Jarno" <aurelien@aurel32.net>,
"Cédric Le Goater" <clg@kaod.org>,
"Bastian Koppelmann" <kbastian@mail.uni-paderborn.de>,
"Rob Herring" <robh@kernel.org>,
"Philippe Mathieu-Daudé" <philmd@redhat.com>
Subject: [Qemu-devel] [PATCH 09/16] hw/devices: Move TI touchscreen declarations into a new header
Date: Fri, 4 Jan 2019 18:58:40 +0100 [thread overview]
Message-ID: <20190104175847.6290-10-philmd@redhat.com> (raw)
In-Reply-To: <20190104175847.6290-1-philmd@redhat.com>
Since uWireSlave is only used in this new header, there is no
need to expose it via "qemu/typedefs.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
MAINTAINERS | 2 ++
hw/arm/nseries.c | 2 +-
hw/arm/palm.c | 2 +-
hw/input/tsc2005.c | 2 +-
hw/input/tsc210x.c | 4 ++--
include/hw/arm/omap.h | 6 +-----
include/hw/devices.h | 14 --------------
include/hw/input/ti_uwire_tsc.h | 28 ++++++++++++++++++++++++++++
include/qemu/typedefs.h | 1 -
9 files changed, 36 insertions(+), 25 deletions(-)
create mode 100644 include/hw/input/ti_uwire_tsc.h
diff --git a/MAINTAINERS b/MAINTAINERS
index 03872552ee..4722805d9e 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -642,6 +642,7 @@ S: Odd Fixes
F: hw/arm/nseries.c
F: hw/input/tsc2*.c
F: include/hw/display/blizzard.h
+F: include/hw/input/ti_uwire_tsc.h
F: include/hw/misc/cbus.h
Palm
@@ -651,6 +652,7 @@ L: qemu-arm@nongnu.org
S: Odd Fixes
F: hw/arm/palm.c
F: hw/input/tsc2*.c
+F: include/hw/input/ti_uwire_tsc.h
Raspberry Pi
M: Peter Maydell <peter.maydell@linaro.org>
diff --git a/hw/arm/nseries.c b/hw/arm/nseries.c
index ac876b5878..f1c94ca607 100644
--- a/hw/arm/nseries.c
+++ b/hw/arm/nseries.c
@@ -30,8 +30,8 @@
#include "ui/console.h"
#include "hw/boards.h"
#include "hw/i2c/i2c.h"
-#include "hw/devices.h"
#include "hw/display/blizzard.h"
+#include "hw/input/ti_uwire_tsc.h"
#include "hw/misc/cbus.h"
#include "hw/block/flash.h"
#include "hw/hw.h"
diff --git a/hw/arm/palm.c b/hw/arm/palm.c
index 285f43709d..2327a25be3 100644
--- a/hw/arm/palm.c
+++ b/hw/arm/palm.c
@@ -26,7 +26,7 @@
#include "hw/arm/omap.h"
#include "hw/boards.h"
#include "hw/arm/arm.h"
-#include "hw/devices.h"
+#include "hw/input/ti_uwire_tsc.h"
#include "hw/loader.h"
#include "exec/address-spaces.h"
#include "cpu.h"
diff --git a/hw/input/tsc2005.c b/hw/input/tsc2005.c
index 2b9108a193..d3c79f7825 100644
--- a/hw/input/tsc2005.c
+++ b/hw/input/tsc2005.c
@@ -23,7 +23,7 @@
#include "hw/hw.h"
#include "qemu/timer.h"
#include "ui/console.h"
-#include "hw/devices.h"
+#include "hw/input/ti_uwire_tsc.h"
#include "trace.h"
#define TSC_CUT_RESOLUTION(value, p) ((value) >> (16 - (p ? 12 : 10)))
diff --git a/hw/input/tsc210x.c b/hw/input/tsc210x.c
index 1cad57f644..8e4c282989 100644
--- a/hw/input/tsc210x.c
+++ b/hw/input/tsc210x.c
@@ -24,8 +24,8 @@
#include "audio/audio.h"
#include "qemu/timer.h"
#include "ui/console.h"
-#include "hw/arm/omap.h" /* For I2SCodec and uWireSlave */
-#include "hw/devices.h"
+#include "hw/arm/omap.h" /* For I2SCodec */
+#include "hw/input/ti_uwire_tsc.h"
#define TSC_DATA_REGISTERS_PAGE 0x0
#define TSC_CONTROL_REGISTERS_PAGE 0x1
diff --git a/include/hw/arm/omap.h b/include/hw/arm/omap.h
index e7fbd340f3..fc0fe4f7a2 100644
--- a/include/hw/arm/omap.h
+++ b/include/hw/arm/omap.h
@@ -20,6 +20,7 @@
#include "exec/memory.h"
# define hw_omap_h "omap.h"
#include "hw/irq.h"
+#include "hw/input/ti_uwire_tsc.h"
#include "target/arm/cpu-qom.h"
#include "qemu/log.h"
@@ -679,11 +680,6 @@ qemu_irq *omap_mpuio_in_get(struct omap_mpuio_s *s);
void omap_mpuio_out_set(struct omap_mpuio_s *s, int line, qemu_irq handler);
void omap_mpuio_key(struct omap_mpuio_s *s, int row, int col, int down);
-struct uWireSlave {
- uint16_t (*receive)(void *opaque);
- void (*send)(void *opaque, uint16_t data);
- void *opaque;
-};
struct omap_uwire_s;
void omap_uwire_attach(struct omap_uwire_s *s,
uWireSlave *slave, int chipselect);
diff --git a/include/hw/devices.h b/include/hw/devices.h
index d9c06de7ab..ba9034050b 100644
--- a/include/hw/devices.h
+++ b/include/hw/devices.h
@@ -11,18 +11,4 @@ void smc91c111_init(NICInfo *, uint32_t, qemu_irq);
/* lan9118.c */
void lan9118_init(NICInfo *, uint32_t, qemu_irq);
-/* tsc210x.c */
-uWireSlave *tsc2102_init(qemu_irq pint);
-uWireSlave *tsc2301_init(qemu_irq penirq, qemu_irq kbirq, qemu_irq dav);
-I2SCodec *tsc210x_codec(uWireSlave *chip);
-uint32_t tsc210x_txrx(void *opaque, uint32_t value, int len);
-void tsc210x_set_transform(uWireSlave *chip,
- MouseTransformInfo *info);
-void tsc210x_key_event(uWireSlave *chip, int key, int down);
-
-/* tsc2005.c */
-void *tsc2005_init(qemu_irq pintdav);
-uint32_t tsc2005_txrx(void *opaque, uint32_t value, int len);
-void tsc2005_set_transform(void *opaque, MouseTransformInfo *info);
-
#endif
diff --git a/include/hw/input/ti_uwire_tsc.h b/include/hw/input/ti_uwire_tsc.h
new file mode 100644
index 0000000000..0f8f296bc3
--- /dev/null
+++ b/include/hw/input/ti_uwire_tsc.h
@@ -0,0 +1,28 @@
+#ifndef HW_INPUT_TI_UWIRE_TOUCHSCREEN_H
+#define HW_INPUT_TI_UWIRE_TOUCHSCREEN_H
+
+/* TI 4/8-wire resistive touch screen converters */
+
+#include "hw/irq.h"
+#include "ui/console.h"
+
+typedef struct uWireSlave {
+ uint16_t (*receive)(void *opaque);
+ void (*send)(void *opaque, uint16_t data);
+ void *opaque;
+} uWireSlave;
+
+/* tsc210x.c */
+uWireSlave *tsc2102_init(qemu_irq pint);
+uWireSlave *tsc2301_init(qemu_irq penirq, qemu_irq kbirq, qemu_irq dav);
+I2SCodec *tsc210x_codec(uWireSlave *chip);
+uint32_t tsc210x_txrx(void *opaque, uint32_t value, int len);
+void tsc210x_set_transform(uWireSlave *chip, MouseTransformInfo *info);
+void tsc210x_key_event(uWireSlave *chip, int key, int down);
+
+/* tsc2005.c */
+void *tsc2005_init(qemu_irq pintdav);
+uint32_t tsc2005_txrx(void *opaque, uint32_t value, int len);
+void tsc2005_set_transform(void *opaque, MouseTransformInfo *info);
+
+#endif
diff --git a/include/qemu/typedefs.h b/include/qemu/typedefs.h
index d59df20c4d..5d2b2925fb 100644
--- a/include/qemu/typedefs.h
+++ b/include/qemu/typedefs.h
@@ -111,7 +111,6 @@ typedef struct SerialState SerialState;
typedef struct SHPCDevice SHPCDevice;
typedef struct SMBusDevice SMBusDevice;
typedef struct SSIBus SSIBus;
-typedef struct uWireSlave uWireSlave;
typedef struct VirtIODevice VirtIODevice;
typedef struct Visitor Visitor;
typedef void SaveStateHandler(QEMUFile *f, void *opaque);
--
2.17.2
next prev parent reply other threads:[~2019-01-04 18:01 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-04 17:58 [Qemu-devel] [PATCH 00/16] hw: Remove "hw/devices.h" Philippe Mathieu-Daudé
2019-01-04 17:58 ` [Qemu-devel] [PATCH 01/16] hw/arm/aspeed: Use TYPE_TMP105/TYPE_PCA9552 instead of hardcoded string Philippe Mathieu-Daudé
2019-01-04 19:40 ` Thomas Huth
2019-01-07 6:48 ` Cédric Le Goater
2019-01-04 17:58 ` [Qemu-devel] [PATCH 02/16] hw: Remove unused 'hw/devices.h' include Philippe Mathieu-Daudé
2019-01-04 22:24 ` [Qemu-devel] [Qemu-ppc] " BALATON Zoltan
2019-01-07 9:56 ` [Qemu-devel] " Thomas Huth
2019-01-04 17:58 ` [Qemu-devel] [PATCH 03/16] hw/devices: Remove unused TC6393XB_RAM definition Philippe Mathieu-Daudé
2019-01-07 6:32 ` Thomas Huth
2019-01-07 7:56 ` Philippe Mathieu-Daudé
2019-01-04 17:58 ` [Qemu-devel] [PATCH 04/16] hw/devices: Move TC6393XB declarations into a new header Philippe Mathieu-Daudé
2019-01-04 17:58 ` [Qemu-devel] [PATCH 05/16] hw/devices: Move Blizzard " Philippe Mathieu-Daudé
2019-01-07 6:39 ` Thomas Huth
2019-01-07 7:58 ` Philippe Mathieu-Daudé
2019-01-04 17:58 ` [Qemu-devel] [PATCH 06/16] hw/devices: Move CBus " Philippe Mathieu-Daudé
2019-01-07 7:00 ` Thomas Huth
2019-01-04 17:58 ` [Qemu-devel] [PATCH 07/16] hw/devices: Move Gamepad " Philippe Mathieu-Daudé
2019-01-04 17:58 ` [Qemu-devel] [PATCH 08/16] MAINTAINERS: Add missing entries for the TI touchscreen devices Philippe Mathieu-Daudé
2019-01-07 7:18 ` Thomas Huth
2019-01-07 8:02 ` Philippe Mathieu-Daudé
2019-01-07 8:05 ` Thomas Huth
2019-01-07 11:44 ` Philippe Mathieu-Daudé
2019-01-04 17:58 ` Philippe Mathieu-Daudé [this message]
2019-01-07 7:22 ` [Qemu-devel] [PATCH 09/16] hw/devices: Move TI touchscreen declarations into a new header Thomas Huth
2019-01-07 8:02 ` Philippe Mathieu-Daudé
2019-01-04 17:58 ` [Qemu-devel] [PATCH 10/16] typedefs: Remove MouseTransformInfo Philippe Mathieu-Daudé
2019-01-04 17:58 ` [Qemu-devel] [PATCH 11/16] typedefs: Remove PS2State Philippe Mathieu-Daudé
2019-01-07 7:26 ` Thomas Huth
2019-01-04 17:58 ` [Qemu-devel] [PATCH 12/16] hw/devices: Move LAN9118 declarations into a new header Philippe Mathieu-Daudé
2019-01-07 7:29 ` Thomas Huth
2019-01-07 8:04 ` Philippe Mathieu-Daudé
2019-01-04 17:58 ` [Qemu-devel] [PATCH 13/16] hw/net/ne2000-isa: Add guards to the header Philippe Mathieu-Daudé
2019-01-07 7:34 ` Thomas Huth
2019-01-04 17:58 ` [Qemu-devel] [PATCH 14/16] hw/net/lan9118: Export TYPE_LAN9118 and use it instead of hardcoded string Philippe Mathieu-Daudé
2019-01-04 17:58 ` [Qemu-devel] [PATCH 15/16] hw/devices: Move SMSC 91C111 declaration into a new header Philippe Mathieu-Daudé
2019-01-07 7:38 ` Thomas Huth
2019-01-04 17:58 ` [Qemu-devel] [PATCH 16/16] RFC hw/net/smc91c111: Convert init helper into an inline function Philippe Mathieu-Daudé
2019-01-04 19:35 ` Thomas Huth
2019-02-04 23:11 ` Philippe Mathieu-Daudé
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190104175847.6290-10-philmd@redhat.com \
--to=philmd@redhat.com \
--cc=andrew@aj.id.au \
--cc=aurelien@aurel32.net \
--cc=b.galvani@gmail.com \
--cc=balrogg@gmail.com \
--cc=clg@kaod.org \
--cc=david@gibson.dropbear.id.au \
--cc=edgar.iglesias@gmail.com \
--cc=f4bug@amsat.org \
--cc=i.mitsyanko@gmail.com \
--cc=jan.kiszka@web.de \
--cc=jasowang@redhat.com \
--cc=joel@jms.id.au \
--cc=kbastian@mail.uni-paderborn.de \
--cc=kraxel@redhat.com \
--cc=magnus.damm@gmail.com \
--cc=michael@walle.cc \
--cc=peter.chubb@nicta.com.au \
--cc=peter.maydell@linaro.org \
--cc=qemu-arm@nongnu.org \
--cc=qemu-devel@nongnu.org \
--cc=qemu-ppc@nongnu.org \
--cc=robh@kernel.org \
--cc=rth@twiddle.net \
--cc=thuth@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).