qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: "Michael S. Tsirkin" <mst@redhat.com>
To: qemu-devel@nongnu.org
Cc: "Peter Maydell" <peter.maydell@linaro.org>,
	"Stefan Berger" <stefanb@linux.vnet.ibm.com>,
	"Marc-André Lureau" <marcandre.lureau@redhat.com>,
	"Igor Mammedov" <imammedo@redhat.com>,
	"Philippe Mathieu-Daudé" <philmd@redhat.com>,
	"Stefan Berger" <stefanb@linux.ibm.com>
Subject: [Qemu-devel] [PULL v2 38/49] tpm: allocate/map buffer for TPM Physical Presence interface
Date: Tue, 15 Jan 2019 15:05:57 -0500	[thread overview]
Message-ID: <20190115200252.25911-39-mst@redhat.com> (raw)
In-Reply-To: <20190115200252.25911-1-mst@redhat.com>

From: Stefan Berger <stefanb@linux.vnet.ibm.com>

Implement a virtual memory device for the TPM Physical Presence interface.
The memory is located at 0xFED45000 and used by ACPI to send messages to the
firmware (BIOS) and by the firmware to provide parameters for each one of
the supported codes.

This interface should be used by all TPM devices on x86 and can be
added by calling tpm_ppi_init_io().

Note: bios_linker cannot be used to allocate the PPI memory region,
since the reserved memory should stay stable across reboots, and might
be needed before the ACPI tables are installed.

Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
 hw/tpm/tpm_ppi.h      | 36 ++++++++++++++++++++++++++++++++++++
 include/hw/acpi/tpm.h |  6 ++++++
 hw/tpm/tpm_crb.c      |  7 +++++++
 hw/tpm/tpm_ppi.c      | 31 +++++++++++++++++++++++++++++++
 hw/tpm/tpm_tis.c      |  7 +++++++
 hw/tpm/Makefile.objs  |  1 +
 6 files changed, 88 insertions(+)
 create mode 100644 hw/tpm/tpm_ppi.h
 create mode 100644 hw/tpm/tpm_ppi.c

diff --git a/hw/tpm/tpm_ppi.h b/hw/tpm/tpm_ppi.h
new file mode 100644
index 0000000000..c5e555fe2c
--- /dev/null
+++ b/hw/tpm/tpm_ppi.h
@@ -0,0 +1,36 @@
+/*
+ * TPM Physical Presence Interface
+ *
+ * Copyright (C) 2018 IBM Corporation
+ *
+ * Authors:
+ *  Stefan Berger    <stefanb@us.ibm.com>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ */
+#ifndef TPM_TPM_PPI_H
+#define TPM_TPM_PPI_H
+
+#include "hw/acpi/tpm.h"
+#include "exec/address-spaces.h"
+
+typedef struct TPMPPI {
+    MemoryRegion ram;
+    uint8_t *buf;
+} TPMPPI;
+
+/**
+ * tpm_ppi_init:
+ * @tpmppi: a TPMPPI
+ * @m: the address-space / MemoryRegion to use
+ * @addr: the address of the PPI region
+ * @obj: the owner object
+ *
+ * Register the TPM PPI memory region at @addr on the given address
+ * space for the object @obj.
+ **/
+void tpm_ppi_init(TPMPPI *tpmppi, struct MemoryRegion *m,
+                  hwaddr addr, Object *obj);
+
+#endif /* TPM_TPM_PPI_H */
diff --git a/include/hw/acpi/tpm.h b/include/hw/acpi/tpm.h
index 3580ffd50c..b8796df916 100644
--- a/include/hw/acpi/tpm.h
+++ b/include/hw/acpi/tpm.h
@@ -188,4 +188,10 @@ REG32(CRB_DATA_BUFFER, 0x80)
 #define TPM2_START_METHOD_MMIO      6
 #define TPM2_START_METHOD_CRB       7
 
+/*
+ * Physical Presence Interface
+ */
+#define TPM_PPI_ADDR_SIZE           0x400
+#define TPM_PPI_ADDR_BASE           0xFED45000
+
 #endif /* HW_ACPI_TPM_H */
diff --git a/hw/tpm/tpm_crb.c b/hw/tpm/tpm_crb.c
index d5b0ac5920..012ec686d4 100644
--- a/hw/tpm/tpm_crb.c
+++ b/hw/tpm/tpm_crb.c
@@ -29,6 +29,7 @@
 #include "sysemu/reset.h"
 #include "tpm_int.h"
 #include "tpm_util.h"
+#include "tpm_ppi.h"
 #include "trace.h"
 
 typedef struct CRBState {
@@ -43,6 +44,7 @@ typedef struct CRBState {
     size_t be_buffer_size;
 
     bool ppi_enabled;
+    TPMPPI ppi;
 } CRBState;
 
 #define CRB(obj) OBJECT_CHECK(CRBState, (obj), TYPE_TPM_CRB)
@@ -294,6 +296,11 @@ static void tpm_crb_realize(DeviceState *dev, Error **errp)
     memory_region_add_subregion(get_system_memory(),
         TPM_CRB_ADDR_BASE + sizeof(s->regs), &s->cmdmem);
 
+    if (s->ppi_enabled) {
+        tpm_ppi_init(&s->ppi, get_system_memory(),
+                     TPM_PPI_ADDR_BASE, OBJECT(s));
+    }
+
     qemu_register_reset(tpm_crb_reset, dev);
 }
 
diff --git a/hw/tpm/tpm_ppi.c b/hw/tpm/tpm_ppi.c
new file mode 100644
index 0000000000..cf17779c20
--- /dev/null
+++ b/hw/tpm/tpm_ppi.c
@@ -0,0 +1,31 @@
+/*
+ * tpm_ppi.c - TPM Physical Presence Interface
+ *
+ * Copyright (C) 2018 IBM Corporation
+ *
+ * Authors:
+ *  Stefan Berger <stefanb@us.ibm.com>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ *
+ */
+
+#include "qemu/osdep.h"
+
+#include "qapi/error.h"
+#include "cpu.h"
+#include "sysemu/memory_mapping.h"
+#include "migration/vmstate.h"
+#include "tpm_ppi.h"
+
+void tpm_ppi_init(TPMPPI *tpmppi, struct MemoryRegion *m,
+                  hwaddr addr, Object *obj)
+{
+    tpmppi->buf = g_malloc0(HOST_PAGE_ALIGN(TPM_PPI_ADDR_SIZE));
+    memory_region_init_ram_device_ptr(&tpmppi->ram, obj, "tpm-ppi",
+                                      TPM_PPI_ADDR_SIZE, tpmppi->buf);
+    vmstate_register_ram(&tpmppi->ram, DEVICE(obj));
+
+    memory_region_add_subregion(m, addr, &tpmppi->ram);
+}
diff --git a/hw/tpm/tpm_tis.c b/hw/tpm/tpm_tis.c
index 1698d83cd3..02d9d5c911 100644
--- a/hw/tpm/tpm_tis.c
+++ b/hw/tpm/tpm_tis.c
@@ -31,6 +31,7 @@
 #include "sysemu/tpm_backend.h"
 #include "tpm_int.h"
 #include "tpm_util.h"
+#include "tpm_ppi.h"
 #include "trace.h"
 
 #define TPM_TIS_NUM_LOCALITIES      5     /* per spec */
@@ -83,6 +84,7 @@ typedef struct TPMState {
     size_t be_buffer_size;
 
     bool ppi_enabled;
+    TPMPPI ppi;
 } TPMState;
 
 #define TPM(obj) OBJECT_CHECK(TPMState, (obj), TYPE_TPM_TIS)
@@ -983,6 +985,11 @@ static void tpm_tis_realizefn(DeviceState *dev, Error **errp)
 
     memory_region_add_subregion(isa_address_space(ISA_DEVICE(dev)),
                                 TPM_TIS_ADDR_BASE, &s->mmio);
+
+    if (s->ppi_enabled) {
+        tpm_ppi_init(&s->ppi, isa_address_space(ISA_DEVICE(dev)),
+                     TPM_PPI_ADDR_BASE, OBJECT(s));
+    }
 }
 
 static void tpm_tis_initfn(Object *obj)
diff --git a/hw/tpm/Makefile.objs b/hw/tpm/Makefile.objs
index 1dc9f8bf2c..700c878622 100644
--- a/hw/tpm/Makefile.objs
+++ b/hw/tpm/Makefile.objs
@@ -1,4 +1,5 @@
 common-obj-y += tpm_util.o
+obj-y += tpm_ppi.o
 common-obj-$(CONFIG_TPM_TIS) += tpm_tis.o
 common-obj-$(CONFIG_TPM_CRB) += tpm_crb.o
 common-obj-$(CONFIG_TPM_PASSTHROUGH) += tpm_passthrough.o
-- 
MST

  parent reply	other threads:[~2019-01-15 20:06 UTC|newest]

Thread overview: 64+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-01-15 20:03 [Qemu-devel] [PULL v2 00/49] pci, pc, virtio: fixes, features Michael S. Tsirkin
2019-01-15 20:03 ` [Qemu-devel] [PULL v2 01/49] pci/pcie: stop plug/unplug if the slot is locked Michael S. Tsirkin
2019-01-15 20:04 ` [Qemu-devel] [PULL v2 02/49] msix: make pba size math more uniform Michael S. Tsirkin
2019-01-15 20:04 ` [Qemu-devel] [PULL v2 03/49] hw/misc/ivshmem: Remove deprecated "ivshmem" legacy device Michael S. Tsirkin
2019-01-15 20:04 ` [Qemu-devel] [PULL v2 04/49] qemu: avoid memory leak while remove disk Michael S. Tsirkin
2019-01-15 20:04 ` [Qemu-devel] [PULL v2 05/49] tests: vhost-user-test: initialize 'fd' in chr_read Michael S. Tsirkin
2019-01-15 20:04 ` [Qemu-devel] [PULL v2 06/49] vhost-user: fix ioeventfd_enabled Michael S. Tsirkin
2019-01-15 20:04 ` [Qemu-devel] [PULL v2 07/49] util: check the return value of fcntl in qemu_set_{block, nonblock} Michael S. Tsirkin
2019-01-25 18:53   ` Philippe Mathieu-Daudé
2019-01-25 18:58     ` Kamil Rytarowski
2019-01-25 19:04     ` Brad Smith
2019-01-25 19:36       ` Michael S. Tsirkin
2019-01-15 20:04 ` [Qemu-devel] [PULL v2 08/49] tests: acpi: use AcpiSdtTable::aml in consistent way Michael S. Tsirkin
2019-01-15 20:04 ` [Qemu-devel] [PULL v2 09/49] tests: acpi: make sure FADT is fetched only once Michael S. Tsirkin
2019-01-15 20:04 ` [Qemu-devel] [PULL v2 10/49] tests: acpi: simplify rsdt handling Michael S. Tsirkin
2019-01-15 20:04 ` [Qemu-devel] [PULL v2 11/49] tests: acpi: reuse fetch_table() for fetching FACS and DSDT Michael S. Tsirkin
2019-01-15 20:04 ` [Qemu-devel] [PULL v2 12/49] tests: acpi: reuse fetch_table() in vmgenid-test Michael S. Tsirkin
2019-01-15 20:04 ` [Qemu-devel] [PULL v2 13/49] tests: smbios: fetch whole table in one step instead of reading it step by step Michael S. Tsirkin
2019-01-15 20:04 ` [Qemu-devel] [PULL v2 14/49] tests: acpi: squash sanitize_fadt_ptrs() into test_acpi_fadt_table() Michael S. Tsirkin
2019-01-15 20:04 ` [Qemu-devel] [PULL v2 15/49] tests: acpi: use AcpiSdtTable::aml instead of AcpiSdtTable::header::signature Michael S. Tsirkin
2019-01-15 20:04 ` [Qemu-devel] [PULL v2 16/49] virtio-net: support RSC v4/v6 tcp traffic for Windows HCK Michael S. Tsirkin
2019-01-15 20:05 ` [Qemu-devel] [PULL v2 17/49] virtio-net: changed VIRTIO_NET_F_RSC_EXT to be 61 Michael S. Tsirkin
2019-01-15 20:05 ` [Qemu-devel] [PULL v2 18/49] virtio: split vhost vsock bits from virtio-pci Michael S. Tsirkin
2019-01-15 20:05 ` [Qemu-devel] [PULL v2 19/49] virtio: split virtio input host " Michael S. Tsirkin
2019-01-15 20:05 ` [Qemu-devel] [PULL v2 20/49] virtio: split virtio input " Michael S. Tsirkin
2019-01-15 20:05 ` [Qemu-devel] [PULL v2 21/49] virtio: split virtio rng " Michael S. Tsirkin
2019-01-15 20:05 ` [Qemu-devel] [PULL v2 22/49] virtio: split virtio balloon " Michael S. Tsirkin
2019-01-15 20:05 ` [Qemu-devel] [PULL v2 23/49] virtio: split virtio 9p " Michael S. Tsirkin
2019-01-15 20:05 ` [Qemu-devel] [PULL v2 24/49] virtio: split vhost user blk " Michael S. Tsirkin
2019-01-15 20:05 ` [Qemu-devel] [PULL v2 25/49] virtio: split vhost user scsi " Michael S. Tsirkin
2019-01-15 20:05 ` [Qemu-devel] [PULL v2 26/49] virtio: split vhost " Michael S. Tsirkin
2019-01-15 20:05 ` [Qemu-devel] [PULL v2 27/49] virtio: split virtio " Michael S. Tsirkin
2019-01-15 20:05 ` [Qemu-devel] [PULL v2 28/49] virtio: split virtio blk " Michael S. Tsirkin
2019-01-15 20:05 ` [Qemu-devel] [PULL v2 29/49] virtio: split virtio net " Michael S. Tsirkin
2019-01-15 20:05 ` [Qemu-devel] [PULL v2 30/49] virtio: split virtio serial " Michael S. Tsirkin
2019-01-15 20:05 ` [Qemu-devel] [PULL v2 31/49] virtio: split virtio gpu bits from virtio-pci.h Michael S. Tsirkin
2019-01-15 20:05 ` [Qemu-devel] [PULL v2 32/49] virtio: split virtio crypto " Michael S. Tsirkin
2019-01-15 20:05 ` [Qemu-devel] [PULL v2 33/49] virtio: virtio 9p really requires CONFIG_VIRTFS to work Michael S. Tsirkin
2019-01-15 20:05 ` [Qemu-devel] [PULL v2 34/49] globals: Allow global properties to be optional Michael S. Tsirkin
2019-01-15 20:05 ` [Qemu-devel] [PULL v2 35/49] virtio: Make disable-legacy/disable-modern compat properties optional Michael S. Tsirkin
2019-01-15 20:05 ` [Qemu-devel] [PULL v2 36/49] hw/misc/edu: add msi_uninit() for pci_edu_uninit() Michael S. Tsirkin
2019-01-15 20:05 ` [Qemu-devel] [PULL v2 37/49] tpm: add a "ppi" boolean property Michael S. Tsirkin
2019-01-15 20:05 ` Michael S. Tsirkin [this message]
2019-01-15 20:05 ` [Qemu-devel] [PULL v2 39/49] acpi: expose TPM/PPI configuration parameters to firmware via fw_cfg Michael S. Tsirkin
2019-01-15 20:06 ` [Qemu-devel] [PULL v2 40/49] acpi: build TPM Physical Presence interface Michael S. Tsirkin
2019-01-15 20:06 ` [Qemu-devel] [PULL v2 41/49] acpi: add ACPI memory clear interface Michael S. Tsirkin
2019-01-15 20:06 ` [Qemu-devel] [PULL v2 42/49] tpm: clear RAM when "memory overwrite" requested Michael S. Tsirkin
2019-01-15 20:06 ` [Qemu-devel] [PULL v2 43/49] hw: acpi: Fix memory hotplug AML generation error Michael S. Tsirkin
2019-01-15 20:06 ` [Qemu-devel] [PULL v2 44/49] acpi: update expected files Michael S. Tsirkin
2019-01-15 20:06 ` [Qemu-devel] [PULL v2 45/49] qemu/compiler: Define QEMU_NONSTRING Michael S. Tsirkin
2019-01-15 20:06 ` [Qemu-devel] [PULL v2 46/49] block/sheepdog: Use QEMU_NONSTRING for non NUL-terminated arrays Michael S. Tsirkin
2019-01-15 20:06 ` [Qemu-devel] [PULL v2 47/49] hw/acpi: " Michael S. Tsirkin
2019-01-15 20:06 ` [Qemu-devel] [PULL v2 48/49] migration: Fix stringop-truncation warning Michael S. Tsirkin
2019-01-15 20:06 ` [Qemu-devel] [PULL v2 49/49] migration: Use strnlen() for fixed-size string Michael S. Tsirkin
2019-01-17 12:48 ` [Qemu-devel] [PULL v2 00/49] pci, pc, virtio: fixes, features Peter Maydell
2019-01-17 13:44   ` Michael S. Tsirkin
2019-01-17 14:07     ` Peter Maydell
2019-01-17 14:19       ` Michael S. Tsirkin
2019-01-17 14:25         ` Peter Maydell
2019-01-17 14:38           ` Michael S. Tsirkin
2019-01-17 16:21     ` Peter Maydell
2019-01-18  2:12       ` Michael S. Tsirkin
2019-01-18  9:28         ` Igor Mammedov
2019-01-18 15:56         ` Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190115200252.25911-39-mst@redhat.com \
    --to=mst@redhat.com \
    --cc=imammedo@redhat.com \
    --cc=marcandre.lureau@redhat.com \
    --cc=peter.maydell@linaro.org \
    --cc=philmd@redhat.com \
    --cc=qemu-devel@nongnu.org \
    --cc=stefanb@linux.ibm.com \
    --cc=stefanb@linux.vnet.ibm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).