From: "Michael S. Tsirkin" <mst@redhat.com>
To: Yang Zhong <yang.zhong@intel.com>
Cc: qemu-devel@nongnu.org, peter.maydell@linaro.org,
thuth@redhat.com, sameo@linux.intel.com, pbonzini@redhat.com,
ehabkost@redhat.com
Subject: Re: [Qemu-devel] [RFC PATCH v3 29/43] build: convert pci.mak to Kconfig
Date: Fri, 18 Jan 2019 11:36:56 -0500 [thread overview]
Message-ID: <20190118113317-mutt-send-email-mst@kernel.org> (raw)
In-Reply-To: <20190118112410.3010-30-yang.zhong@intel.com>
On Fri, Jan 18, 2019 at 07:23:56PM +0800, Yang Zhong wrote:
> From: Paolo Bonzini <pbonzini@redhat.com>
>
> Instead of including the same list of devices for each target,
> set CONFIG_PCI to true, and make the devices default to present
> whenever PCI is available.
>
> Done mostly with the following script:
>
> while read i; do
> i=${i%=y}; i=${i#CONFIG_}
> sed -i -e'/^config '$i'$/!b' -en \
> -e'a\' -e' default y\' -e' depends on PCI' \
> `grep -lw $i hw/*/Kconfig`
> done < default-configs/pci.mak
>
> followed by replacing a few "depends on" clauses with "select"
> whenever the symbol is not really related to PCI.
>
> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
> Signed-off-by: Yang Zhong <yang.zhong@intel.com>
> Reviewed-by: Thomas Huth <thuth@redhat.com>
Pls CC me directly on pci patches.
> ---
> default-configs/alpha-softmmu.mak | 2 +-
> default-configs/arm-softmmu.mak | 2 +-
> default-configs/hppa-softmmu.mak | 2 +-
> default-configs/i386-softmmu.mak | 4 +--
> default-configs/mips-softmmu-common.mak | 2 +-
> default-configs/pci.mak | 48 -------------------------
> default-configs/ppc-softmmu.mak | 2 +-
> default-configs/riscv32-softmmu.mak | 3 +-
> default-configs/riscv64-softmmu.mak | 3 +-
> default-configs/sh4-softmmu.mak | 2 +-
> default-configs/sh4eb-softmmu.mak | 2 +-
> default-configs/sparc64-softmmu.mak | 2 +-
> hw/audio/Kconfig | 6 ++++
> hw/block/Kconfig | 2 ++
> hw/char/Kconfig | 2 ++
> hw/display/Kconfig | 15 +++++++-
> hw/ide/Kconfig | 3 ++
> hw/ipack/Kconfig | 2 ++
> hw/misc/Kconfig | 4 +++
> hw/net/Kconfig | 23 ++++++++++++
> hw/pci-bridge/Kconfig | 4 +++
> hw/pci-host/Kconfig | 4 +++
> hw/scsi/Kconfig | 11 ++++++
> hw/sd/Kconfig | 3 ++
> hw/usb/Kconfig | 10 ++++++
> hw/virtio/Kconfig | 3 ++
> hw/watchdog/Kconfig | 2 ++
> 27 files changed, 104 insertions(+), 64 deletions(-)
> delete mode 100644 default-configs/pci.mak
>
> diff --git a/default-configs/alpha-softmmu.mak b/default-configs/alpha-softmmu.mak
> index 400dff3c1c..e583177e79 100644
> --- a/default-configs/alpha-softmmu.mak
> +++ b/default-configs/alpha-softmmu.mak
> @@ -1,7 +1,7 @@
> # Default configuration for alpha-softmmu
>
> -include pci.mak
> include usb.mak
> +CONFIG_PCI=y
> CONFIG_SERIAL=y
> CONFIG_SERIAL_ISA=y
> CONFIG_I82374=y
> diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak
> index 05e085a75f..8734c508ee 100644
> --- a/default-configs/arm-softmmu.mak
> +++ b/default-configs/arm-softmmu.mak
> @@ -1,7 +1,7 @@
> # Default configuration for arm-softmmu
>
> -include pci.mak
> include usb.mak
> +CONFIG_PCI=y
> CONFIG_VGA=y
> CONFIG_NAND=y
> CONFIG_ECC=y
> diff --git a/default-configs/hppa-softmmu.mak b/default-configs/hppa-softmmu.mak
> index 846e9f0ba6..673ae5a7cf 100644
> --- a/default-configs/hppa-softmmu.mak
> +++ b/default-configs/hppa-softmmu.mak
> @@ -1,5 +1,5 @@
> -include pci.mak
> include usb.mak
> +CONFIG_PCI=y
> CONFIG_SERIAL=y
> CONFIG_SERIAL_ISA=y
> CONFIG_ISA_BUS=y
> diff --git a/default-configs/i386-softmmu.mak b/default-configs/i386-softmmu.mak
> index f71284516c..b868d1f4e6 100644
> --- a/default-configs/i386-softmmu.mak
> +++ b/default-configs/i386-softmmu.mak
> @@ -1,11 +1,10 @@
> # Default configuration for i386-softmmu
>
> -include pci.mak
> +CONFIG_PCI=y
> include sound.mak
> include usb.mak
> include hyperv.mak
> CONFIG_VGA_ISA=y
> -CONFIG_VGA_CIRRUS=y
> CONFIG_VMWARE_VGA=y
> CONFIG_VMXNET3_PCI=y
> CONFIG_VIRTIO_VGA=y
> @@ -52,7 +51,6 @@ CONFIG_MEM_DEVICE=y
> CONFIG_DIMM=y
> CONFIG_NVDIMM=y
> CONFIG_ACPI_NVDIMM=y
> -CONFIG_PCIE_PORT=y
> CONFIG_XIO3130=y
> CONFIG_IOH3420=y
> CONFIG_I82801B11=y
> diff --git a/default-configs/mips-softmmu-common.mak b/default-configs/mips-softmmu-common.mak
> index 479fb4d900..ecb45276f3 100644
> --- a/default-configs/mips-softmmu-common.mak
> +++ b/default-configs/mips-softmmu-common.mak
> @@ -1,8 +1,8 @@
> # Common mips*-softmmu CONFIG defines
>
> -include pci.mak
> include sound.mak
> include usb.mak
> +CONFIG_PCI=y
> CONFIG_ESP=y
> CONFIG_SCSI=y
> CONFIG_VGA_ISA=y
> diff --git a/default-configs/pci.mak b/default-configs/pci.mak
> deleted file mode 100644
> index 553b1905de..0000000000
> --- a/default-configs/pci.mak
> +++ /dev/null
> @@ -1,48 +0,0 @@
> -CONFIG_PCI=y
> -CONFIG_PCIE=y
> -# For now, CONFIG_IDE_CORE requires ISA, so we enable it here
> -CONFIG_ISA_BUS=y
> -CONFIG_VIRTIO_PCI=y
> -include virtio.mak
> -CONFIG_USB_UHCI=y
> -CONFIG_USB_OHCI=y
> -CONFIG_USB_EHCI=y
> -CONFIG_USB_XHCI=y
> -CONFIG_USB_XHCI_NEC=y
> -CONFIG_NE2000_PCI=y
> -CONFIG_EEPRO100_PCI=y
> -CONFIG_PCNET_PCI=y
> -CONFIG_PCNET_COMMON=y
> -CONFIG_AC97=y
> -CONFIG_HDA=y
> -CONFIG_ES1370=y
> -CONFIG_SCSI=y
> -CONFIG_LSI_SCSI_PCI=y
> -CONFIG_VMW_PVSCSI_SCSI_PCI=y
> -CONFIG_MEGASAS_SCSI_PCI=y
> -CONFIG_MPTSAS_SCSI_PCI=y
> -CONFIG_RTL8139_PCI=y
> -CONFIG_E1000_PCI=y
> -CONFIG_E1000E_PCI=y
> -CONFIG_AHCI=y
> -CONFIG_ESP=y
> -CONFIG_ESP_PCI=y
> -CONFIG_SERIAL=y
> -CONFIG_SERIAL_ISA=y
> -CONFIG_SERIAL_PCI=y
> -CONFIG_CAN_BUS=y
> -CONFIG_CAN_SJA1000=y
> -CONFIG_CAN_PCI=y
> -CONFIG_IPACK=y
> -CONFIG_WDT_IB6300ESB=y
> -CONFIG_PCI_TESTDEV=y
> -CONFIG_NVME_PCI=y
> -CONFIG_SD=y
> -CONFIG_SDHCI=y
> -CONFIG_EDU=y
> -CONFIG_VGA=y
> -CONFIG_VGA_PCI=y
> -CONFIG_BOCHS_DISPLAY=y
> -CONFIG_IVSHMEM_DEVICE=$(CONFIG_IVSHMEM)
> -CONFIG_ROCKER=y
> -CONFIG_EDID=y
> diff --git a/default-configs/ppc-softmmu.mak b/default-configs/ppc-softmmu.mak
> index 7f80f0ccba..2d69adfabd 100644
> --- a/default-configs/ppc-softmmu.mak
> +++ b/default-configs/ppc-softmmu.mak
> @@ -1,8 +1,8 @@
> # Default configuration for ppc-softmmu
>
> -include pci.mak
> include sound.mak
> include usb.mak
> +CONFIG_PCI=y
>
> # For embedded PPCs:
> CONFIG_PPC4XX=y
> diff --git a/default-configs/riscv32-softmmu.mak b/default-configs/riscv32-softmmu.mak
> index 2dccd512d2..d45f01bdcf 100644
> --- a/default-configs/riscv32-softmmu.mak
> +++ b/default-configs/riscv32-softmmu.mak
> @@ -1,8 +1,7 @@
> # Default configuration for riscv-softmmu
>
> -include pci.mak
> include usb.mak
> -
> +CONFIG_PCI=y
> CONFIG_SERIAL=y
> CONFIG_VIRTIO_MMIO=y
>
> diff --git a/default-configs/riscv64-softmmu.mak b/default-configs/riscv64-softmmu.mak
> index 2dccd512d2..d45f01bdcf 100644
> --- a/default-configs/riscv64-softmmu.mak
> +++ b/default-configs/riscv64-softmmu.mak
> @@ -1,8 +1,7 @@
> # Default configuration for riscv-softmmu
>
> -include pci.mak
> include usb.mak
> -
> +CONFIG_PCI=y
> CONFIG_SERIAL=y
> CONFIG_VIRTIO_MMIO=y
>
> diff --git a/default-configs/sh4-softmmu.mak b/default-configs/sh4-softmmu.mak
> index 1fdb009151..8382504d11 100644
> --- a/default-configs/sh4-softmmu.mak
> +++ b/default-configs/sh4-softmmu.mak
> @@ -1,7 +1,7 @@
> # Default configuration for sh4-softmmu
>
> -include pci.mak
> include usb.mak
> +CONFIG_PCI=y
> CONFIG_SERIAL=y
> CONFIG_SERIAL_ISA=y
> CONFIG_PTIMER=y
> diff --git a/default-configs/sh4eb-softmmu.mak b/default-configs/sh4eb-softmmu.mak
> index 3b550a5fe8..a77e1538e9 100644
> --- a/default-configs/sh4eb-softmmu.mak
> +++ b/default-configs/sh4eb-softmmu.mak
> @@ -1,7 +1,7 @@
> # Default configuration for sh4eb-softmmu
>
> -include pci.mak
> include usb.mak
> +CONFIG_PCI=y
> CONFIG_SERIAL=y
> CONFIG_SERIAL_ISA=y
> CONFIG_PTIMER=y
> diff --git a/default-configs/sparc64-softmmu.mak b/default-configs/sparc64-softmmu.mak
> index 1fae4888db..db393d9eb3 100644
> --- a/default-configs/sparc64-softmmu.mak
> +++ b/default-configs/sparc64-softmmu.mak
> @@ -1,7 +1,7 @@
> # Default configuration for sparc64-softmmu
>
> -include pci.mak
> include usb.mak
> +CONFIG_PCI=y
> CONFIG_M48T59=y
> CONFIG_PTIMER=y
> CONFIG_SERIAL=y
> diff --git a/hw/audio/Kconfig b/hw/audio/Kconfig
> index 207baee6e1..af34bbcf0c 100644
> --- a/hw/audio/Kconfig
> +++ b/hw/audio/Kconfig
> @@ -3,9 +3,13 @@ config SB16
>
> config ES1370
> bool
> + default y
> + depends on PCI
>
> config AC97
> bool
> + default y
> + depends on PCI
>
> config ADLIB
> bool
> @@ -18,6 +22,8 @@ config CS4231A
>
> config HDA
> bool
> + default y
> + depends on PCI
>
> config PCSPK
> bool
> diff --git a/hw/block/Kconfig b/hw/block/Kconfig
> index 9d418bce4d..3710434436 100644
> --- a/hw/block/Kconfig
> +++ b/hw/block/Kconfig
> @@ -21,6 +21,8 @@ config ONENAND
>
> config NVME_PCI
> bool
> + default y
> + depends on PCI
>
> config VIRTIO_BLK
> bool
> diff --git a/hw/char/Kconfig b/hw/char/Kconfig
> index 26c13243cf..1ed6f0dbce 100644
> --- a/hw/char/Kconfig
> +++ b/hw/char/Kconfig
> @@ -15,6 +15,8 @@ config SERIAL_ISA
>
> config SERIAL_PCI
> bool
> + default y
> + depends on PCI
>
> config VIRTIO_SERIAL
> bool
> diff --git a/hw/display/Kconfig b/hw/display/Kconfig
> index 132aeffdbe..6bcfc10bcb 100644
> --- a/hw/display/Kconfig
> +++ b/hw/display/Kconfig
> @@ -9,6 +9,9 @@ config ADS7846
>
> config VGA_CIRRUS
> bool
> + default y
> + depends on PCI
> + select VGA
>
> config G364FB
> bool
> @@ -30,6 +33,9 @@ config SSD0323
>
> config VGA_PCI
> bool
> + default y
> + depends on PCI
> + select VGA
>
> config VGA_ISA
> bool
> @@ -39,9 +45,15 @@ config VGA_ISA_MM
>
> config VMWARE_VGA
> bool
> + default y
> + depends on PCI
> + select VGA
>
> config BOCHS_DISPLAY
> bool
> + default y
> + depends on PCI
> + select VGA
>
> config BLIZZARD
> bool
> @@ -67,7 +79,8 @@ config VGA
>
> config QXL
> bool
> - depends on SPICE
> + depends on SPICE && PCI
> + select VGA
>
> config VIRTIO_GPU
> bool
> diff --git a/hw/ide/Kconfig b/hw/ide/Kconfig
> index fe27705790..3778580df2 100644
> --- a/hw/ide/Kconfig
> +++ b/hw/ide/Kconfig
> @@ -7,6 +7,7 @@ config IDE_QDEV
>
> config IDE_PCI
> bool
> + depends on PCI
> select IDE_CORE
>
> config IDE_ISA
> @@ -42,6 +43,8 @@ config MICRODRIVE
>
> config AHCI
> bool
> + default y
> + depends on PCI
> select IDE_QDEV
>
> config IDE_SII3112
> diff --git a/hw/ipack/Kconfig b/hw/ipack/Kconfig
> index 481e0d2e64..98bd21cf0f 100644
> --- a/hw/ipack/Kconfig
> +++ b/hw/ipack/Kconfig
> @@ -1,2 +1,4 @@
> config IPACK
> bool
> + default y
> + depends on PCI
> diff --git a/hw/misc/Kconfig b/hw/misc/Kconfig
> index cc8dbed24e..1ca4b2464e 100644
> --- a/hw/misc/Kconfig
> +++ b/hw/misc/Kconfig
> @@ -21,9 +21,13 @@ config ISA_TESTDEV
>
> config PCI_TESTDEV
> bool
> + default y
> + depends on PCI
>
> config EDU
> bool
> + default y
> + depends on PCI
>
> config PCA9552
> bool
> diff --git a/hw/net/Kconfig b/hw/net/Kconfig
> index 6b2ec971b5..35204260fa 100644
> --- a/hw/net/Kconfig
> +++ b/hw/net/Kconfig
> @@ -3,27 +3,42 @@ config DP8393X
>
> config NE2000_PCI
> bool
> + default y
> + depends on PCI
>
> config EEPRO100_PCI
> bool
> + default y
> + depends on PCI
>
> config PCNET_PCI
> bool
> + default y
> + depends on PCI
> + select PCNET_COMMON
>
> config PCNET_COMMON
> bool
>
> config E1000_PCI
> bool
> + default y
> + depends on PCI
>
> config E1000E_PCI
> bool
> + default y
> + depends on PCIE
>
> config RTL8139_PCI
> bool
> + default y
> + depends on PCI
>
> config VMXNET3_PCI
> bool
> + default y
> + depends on PCI
>
> config SMC91C111
> bool
> @@ -81,12 +96,20 @@ config ETSEC
>
> config ROCKER
> bool
> + default y
> + depends on PCI
>
> config CAN_BUS
> bool
>
> config CAN_PCI
> bool
> + default y
> + depends on PCI
> + select CAN_BUS
>
> config CAN_SJA1000
> bool
> + default y
> + depends on PCI
> + select CAN_BUS
> diff --git a/hw/pci-bridge/Kconfig b/hw/pci-bridge/Kconfig
> index bb19b7aac1..d54d878023 100644
> --- a/hw/pci-bridge/Kconfig
> +++ b/hw/pci-bridge/Kconfig
> @@ -1,14 +1,18 @@
> config PCIE_PORT
> bool
> + default y
> + depends on PCIE
>
> config PXB
> bool
>
> config XIO3130
> bool
> + depends on PCIE
>
> config IOH3420
> bool
> + depends on PCIE
>
> config I82801B11
> bool
> diff --git a/hw/pci-host/Kconfig b/hw/pci-host/Kconfig
> index 359df1d239..20c3de37a3 100644
> --- a/hw/pci-host/Kconfig
> +++ b/hw/pci-host/Kconfig
> @@ -24,12 +24,16 @@ config PCI_PIIX
>
> config PCI_Q35
> bool
> + select PCIE
ok...
> config PCI_GENERIC
> bool
> + select PCIE
>
why is this?
> config PCI_XILINX
> bool
> + select PCIE
>
> config PCI_DESIGNWARE
> bool
> + select PCIE
sure about the above?
> diff --git a/hw/scsi/Kconfig b/hw/scsi/Kconfig
> index eb78478ef0..812a12522b 100644
> --- a/hw/scsi/Kconfig
> +++ b/hw/scsi/Kconfig
> @@ -3,21 +3,32 @@ config SCSI
>
> config LSI_SCSI_PCI
> bool
> + default y
> + depends on PCI
>
> config MPTSAS_SCSI_PCI
> bool
> + default y
> + depends on PCI
>
> config MEGASAS_SCSI_PCI
> bool
> + default y
> + depends on PCI
>
> config VMW_PVSCSI_SCSI_PCI
> bool
> + default y
> + depends on PCI
>
> config ESP
> bool
>
> config ESP_PCI
> bool
> + default y
> + depends on PCI
> + select ESP
>
> config VIRTIO_SCSI
> bool
> diff --git a/hw/sd/Kconfig b/hw/sd/Kconfig
> index 4f43bbb352..90ac74950a 100644
> --- a/hw/sd/Kconfig
> +++ b/hw/sd/Kconfig
> @@ -9,3 +9,6 @@ config SD
>
> config SDHCI
> bool
> + default y
> + depends on PCI
> + select SD
> diff --git a/hw/usb/Kconfig b/hw/usb/Kconfig
> index cbf5c5d761..f23c542d27 100644
> --- a/hw/usb/Kconfig
> +++ b/hw/usb/Kconfig
> @@ -3,21 +3,31 @@ config USB
>
> config USB_UHCI
> bool
> + default y
> + depends on PCI
>
> config USB_OHCI
> bool
> + default y
> + depends on PCI
>
> config USB_EHCI
> bool
> + default y
> + depends on PCI
>
> config USB_EHCI_SYSBUS
> bool
>
> config USB_XHCI
> bool
> + default y
> + depends on PCI
>
> config USB_XHCI_NEC
> bool
> + default y
> + depends on PCI
>
> config USB_MUSB
> bool
> diff --git a/hw/virtio/Kconfig b/hw/virtio/Kconfig
> index ebf18124fb..aabd6d4d96 100644
> --- a/hw/virtio/Kconfig
> +++ b/hw/virtio/Kconfig
> @@ -6,6 +6,9 @@ config VIRTIO_RNG
>
> config VIRTIO_PCI
> bool
> + default y
> + depends on PCI
> + select VIRTIO
>
> config VIRTIO_MMIO
> bool
> diff --git a/hw/watchdog/Kconfig b/hw/watchdog/Kconfig
> index cd0244f4e1..4e24bf8240 100644
> --- a/hw/watchdog/Kconfig
> +++ b/hw/watchdog/Kconfig
> @@ -3,6 +3,8 @@ config CMSDK_APB_WATCHDOG
>
> config WDT_IB6300ESB
> bool
> + default y
> + depends on PCI
>
> config WDT_IB700
> bool
> --
> 2.17.1
>
next prev parent reply other threads:[~2019-01-18 16:37 UTC|newest]
Thread overview: 57+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-18 11:23 [Qemu-devel] [RFC PATCH v3 00/43] Support Kconfig in QEMU Yang Zhong
2019-01-18 11:23 ` [Qemu-devel] [RFC PATCH v3 01/43] build: actually use CONFIG_PAM Yang Zhong
2019-01-18 11:23 ` [Qemu-devel] [RFC PATCH v3 02/43] hw/i386/Makefile.objs: Build pc_piix* and pc_q35 boards Yang Zhong
2019-01-18 11:23 ` [Qemu-devel] [RFC PATCH v3 03/43] hw/arm/Makefile.objs: CONFIG_VIRT created for virt board Yang Zhong
2019-01-18 11:23 ` [Qemu-devel] [RFC PATCH v3 04/43] hw/m68k/Makefile.objs: Conditionally build boards Yang Zhong
2019-01-18 11:23 ` [Qemu-devel] [RFC PATCH v3 05/43] hw/microblaze/Makefile.objs: Create configs for petalogix and xilinx boards Yang Zhong
2019-01-18 11:23 ` [Qemu-devel] [RFC PATCH v3 06/43] hw/mips/Makefile.objs: Create CONFIG_* for r4k, malta, mipssim boards Yang Zhong
2019-01-18 11:23 ` [Qemu-devel] [RFC PATCH v3 07/43] hw/ppc/Makefile.objs: Build all boards conditinally with CONFIG_* Yang Zhong
2019-01-18 11:23 ` [Qemu-devel] [RFC PATCH v3 08/43] hw/sh4/Makefile.objs: New CONFIG_* varibales created for sh4 boards and device Yang Zhong
2019-01-18 11:23 ` [Qemu-devel] [RFC PATCH v3 09/43] hw/sparc/Makefile.objs: CONFIG_* for sun4m and leon3 created Yang Zhong
2019-01-18 11:23 ` [Qemu-devel] [RFC PATCH v3 10/43] hw/lm32/Makefile.objs: Conditionally build lm32 and milkmyst Yang Zhong
2019-01-18 11:23 ` [Qemu-devel] [RFC PATCH v3 11/43] hw/xtensa/Makefile.objs: Build xtensa_sim and xtensa_fpga conditionally Yang Zhong
2019-01-18 11:23 ` [Qemu-devel] [RFC PATCH v3 12/43] hw/nios2/Makefile.objs: Conditionally build nios2 Yang Zhong
2019-01-18 11:23 ` [Qemu-devel] [RFC PATCH v3 13/43] hw/riscv/Makefile.objs: Create CONFIG_* for riscv boards Yang Zhong
2019-01-18 11:23 ` [Qemu-devel] [RFC PATCH v3 14/43] hw/sparc64/Makefile.objs: Create CONFIG_* for sparc64 Yang Zhong
2019-01-18 11:23 ` [Qemu-devel] [RFC PATCH v3 15/43] hw/alpha/Makefile.objs: Create CONFIG_* for alpha Yang Zhong
2019-01-18 11:23 ` [Qemu-devel] [RFC PATCH v3 16/43] hw/cris/Makefile.objs: Create CONFIG_* for cris Yang Zhong
2019-01-18 11:23 ` [Qemu-devel] [RFC PATCH v3 17/43] hw/hppa/Makefile.objs: Create CONFIG_* for hppa Yang Zhong
2019-01-18 11:23 ` [Qemu-devel] [RFC PATCH v3 18/43] hw/moxie/Makefile.objs: Conditionally build moxie Yang Zhong
2019-01-18 11:23 ` [Qemu-devel] [RFC PATCH v3 19/43] hw/openrisc/Makefile.objs: Create CONFIG_* for openrisc Yang Zhong
2019-01-18 11:23 ` [Qemu-devel] [RFC PATCH v3 20/43] hw/tricore/Makefile.objs: Create CONFIG_* for tricore Yang Zhong
2019-01-18 11:23 ` [Qemu-devel] [RFC PATCH v3 21/43] minikconfig: add parser skeleton Yang Zhong
2019-01-18 11:23 ` [Qemu-devel] [RFC PATCH v3 22/43] minikconfig: add AST Yang Zhong
2019-01-18 11:23 ` [Qemu-devel] [RFC PATCH v3 23/43] minikconfig: add semantic analysis Yang Zhong
2019-01-18 11:23 ` [Qemu-devel] [RFC PATCH v3 24/43] hw/display: make edid configurable Yang Zhong
2019-01-18 11:23 ` [Qemu-devel] [RFC PATCH v3 25/43] kconfig: introduce kconfig files Yang Zhong
2019-01-18 11:23 ` [Qemu-devel] [RFC PATCH v3 26/43] build: switch to Kconfig Yang Zhong
2019-01-18 11:23 ` [Qemu-devel] [RFC PATCH v3 27/43] ide: express dependencies with Kconfig Yang Zhong
2019-01-18 11:23 ` [Qemu-devel] [RFC PATCH v3 28/43] hw/pci/Makefile.objs: make pcie configurable Yang Zhong
2019-01-18 16:33 ` Michael S. Tsirkin
2019-01-18 17:28 ` Paolo Bonzini
2019-01-18 19:28 ` Michael S. Tsirkin
2019-01-21 10:25 ` Paolo Bonzini
2019-01-21 11:26 ` Yang Zhong
2019-01-21 11:54 ` Paolo Bonzini
2019-01-18 11:23 ` [Qemu-devel] [RFC PATCH v3 29/43] build: convert pci.mak to Kconfig Yang Zhong
2019-01-18 16:36 ` Michael S. Tsirkin [this message]
2019-01-18 17:03 ` Paolo Bonzini
2019-01-18 19:21 ` Michael S. Tsirkin
2019-01-18 11:23 ` [Qemu-devel] [RFC PATCH v3 30/43] build: convert sound.mak " Yang Zhong
2019-01-18 11:23 ` [Qemu-devel] [RFC PATCH v3 31/43] build: convert usb.mak " Yang Zhong
2019-01-18 11:23 ` [Qemu-devel] [RFC PATCH v3 32/43] scsi: express dependencies with Kconfig Yang Zhong
2019-01-18 11:24 ` [Qemu-devel] [RFC PATCH v3 33/43] bluetooth: " Yang Zhong
2019-01-18 11:24 ` [Qemu-devel] [RFC PATCH v3 34/43] isa: express dependencies with kconfig Yang Zhong
2019-01-18 11:24 ` [Qemu-devel] [RFC PATCH v3 35/43] i386: express dependencies with Kconfig Yang Zhong
2019-01-18 11:24 ` [Qemu-devel] [RFC PATCH v3 36/43] i2c: " Yang Zhong
2019-01-18 11:24 ` [Qemu-devel] [RFC PATCH v3 37/43] ptimer: " Yang Zhong
2019-01-18 11:24 ` [Qemu-devel] [RFC PATCH v3 38/43] edid: express dependencies with kconfig Yang Zhong
2019-01-18 11:24 ` [Qemu-devel] [RFC PATCH v3 39/43] hyperv: " Yang Zhong
2019-01-18 11:24 ` [Qemu-devel] [RFC PATCH v3 40/43] virtio: make virtio dependencies with Kconfig Yang Zhong
2019-01-18 11:24 ` [Qemu-devel] [RFC PATCH v3 41/43] i386-softmmu.mak: remove all CONFIG_* except boards definitions Yang Zhong
2019-01-18 15:28 ` Paolo Bonzini
2019-01-18 15:37 ` Thomas Huth
2019-01-18 11:24 ` [Qemu-devel] [RFC PATCH v3 42/43] minikconf: implement allyesconfig, allnoconfig, randconfig, defconfig Yang Zhong
2019-01-18 11:24 ` [Qemu-devel] [RFC PATCH v3 43/43] Makefile: only support defconfig Yang Zhong
2019-01-18 16:30 ` [Qemu-devel] [RFC PATCH v3 00/43] Support Kconfig in QEMU Michael S. Tsirkin
2019-01-18 16:36 ` Paolo Bonzini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190118113317-mutt-send-email-mst@kernel.org \
--to=mst@redhat.com \
--cc=ehabkost@redhat.com \
--cc=pbonzini@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=sameo@linux.intel.com \
--cc=thuth@redhat.com \
--cc=yang.zhong@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).