qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Peter Maydell <peter.maydell@linaro.org>
To: qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 22/49] target/arm: Create ARMVAParameters and helpers
Date: Fri, 18 Jan 2019 14:57:38 +0000	[thread overview]
Message-ID: <20190118145805.6852-23-peter.maydell@linaro.org> (raw)
In-Reply-To: <20190118145805.6852-1-peter.maydell@linaro.org>

From: Richard Henderson <richard.henderson@linaro.org>

Split out functions to extract the virtual address parameters.
Let the functions choose T0 or T1 address space half, if present.
Extract (most of) the control bits that vary between EL or Tx.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20190108223129.5570-19-richard.henderson@linaro.org
[PMM: fixed minor checkpatch comment nits]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/internals.h |  14 +++
 target/arm/helper.c    | 278 ++++++++++++++++++++++-------------------
 2 files changed, 164 insertions(+), 128 deletions(-)

diff --git a/target/arm/internals.h b/target/arm/internals.h
index 248fdf7a3c0..fdda2c866a3 100644
--- a/target/arm/internals.h
+++ b/target/arm/internals.h
@@ -942,4 +942,18 @@ static inline ARMMMUIdx arm_stage1_mmu_idx(CPUARMState *env)
 ARMMMUIdx arm_stage1_mmu_idx(CPUARMState *env);
 #endif
 
+/*
+ * Parameters of a given virtual address, as extracted from the
+ * translation control register (TCR) for a given regime.
+ */
+typedef struct ARMVAParameters {
+    unsigned tsz    : 8;
+    unsigned select : 1;
+    bool tbi        : 1;
+    bool epd        : 1;
+    bool hpd        : 1;
+    bool using16k   : 1;
+    bool using64k   : 1;
+} ARMVAParameters;
+
 #endif
diff --git a/target/arm/helper.c b/target/arm/helper.c
index 35bbc7f1091..f09404e931f 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -9744,6 +9744,124 @@ static uint8_t convert_stage2_attrs(CPUARMState *env, uint8_t s2attrs)
     return (hiattr << 6) | (hihint << 4) | (loattr << 2) | lohint;
 }
 
+static ARMVAParameters aa64_va_parameters(CPUARMState *env, uint64_t va,
+                                          ARMMMUIdx mmu_idx, bool data)
+{
+    uint64_t tcr = regime_tcr(env, mmu_idx)->raw_tcr;
+    uint32_t el = regime_el(env, mmu_idx);
+    bool tbi, epd, hpd, using16k, using64k;
+    int select, tsz;
+
+    /*
+     * Bit 55 is always between the two regions, and is canonical for
+     * determining if address tagging is enabled.
+     */
+    select = extract64(va, 55, 1);
+
+    if (el > 1) {
+        tsz = extract32(tcr, 0, 6);
+        using64k = extract32(tcr, 14, 1);
+        using16k = extract32(tcr, 15, 1);
+        if (mmu_idx == ARMMMUIdx_S2NS) {
+            /* VTCR_EL2 */
+            tbi = hpd = false;
+        } else {
+            tbi = extract32(tcr, 20, 1);
+            hpd = extract32(tcr, 24, 1);
+        }
+        epd = false;
+    } else if (!select) {
+        tsz = extract32(tcr, 0, 6);
+        epd = extract32(tcr, 7, 1);
+        using64k = extract32(tcr, 14, 1);
+        using16k = extract32(tcr, 15, 1);
+        tbi = extract64(tcr, 37, 1);
+        hpd = extract64(tcr, 41, 1);
+    } else {
+        int tg = extract32(tcr, 30, 2);
+        using16k = tg == 1;
+        using64k = tg == 3;
+        tsz = extract32(tcr, 16, 6);
+        epd = extract32(tcr, 23, 1);
+        tbi = extract64(tcr, 38, 1);
+        hpd = extract64(tcr, 42, 1);
+    }
+    tsz = MIN(tsz, 39);  /* TODO: ARMv8.4-TTST */
+    tsz = MAX(tsz, 16);  /* TODO: ARMv8.2-LVA  */
+
+    return (ARMVAParameters) {
+        .tsz = tsz,
+        .select = select,
+        .tbi = tbi,
+        .epd = epd,
+        .hpd = hpd,
+        .using16k = using16k,
+        .using64k = using64k,
+    };
+}
+
+static ARMVAParameters aa32_va_parameters(CPUARMState *env, uint32_t va,
+                                          ARMMMUIdx mmu_idx)
+{
+    uint64_t tcr = regime_tcr(env, mmu_idx)->raw_tcr;
+    uint32_t el = regime_el(env, mmu_idx);
+    int select, tsz;
+    bool epd, hpd;
+
+    if (mmu_idx == ARMMMUIdx_S2NS) {
+        /* VTCR */
+        bool sext = extract32(tcr, 4, 1);
+        bool sign = extract32(tcr, 3, 1);
+
+        /*
+         * If the sign-extend bit is not the same as t0sz[3], the result
+         * is unpredictable. Flag this as a guest error.
+         */
+        if (sign != sext) {
+            qemu_log_mask(LOG_GUEST_ERROR,
+                          "AArch32: VTCR.S / VTCR.T0SZ[3] mismatch\n");
+        }
+        tsz = sextract32(tcr, 0, 4) + 8;
+        select = 0;
+        hpd = false;
+        epd = false;
+    } else if (el == 2) {
+        /* HTCR */
+        tsz = extract32(tcr, 0, 3);
+        select = 0;
+        hpd = extract64(tcr, 24, 1);
+        epd = false;
+    } else {
+        int t0sz = extract32(tcr, 0, 3);
+        int t1sz = extract32(tcr, 16, 3);
+
+        if (t1sz == 0) {
+            select = va > (0xffffffffu >> t0sz);
+        } else {
+            /* Note that we will detect errors later.  */
+            select = va >= ~(0xffffffffu >> t1sz);
+        }
+        if (!select) {
+            tsz = t0sz;
+            epd = extract32(tcr, 7, 1);
+            hpd = extract64(tcr, 41, 1);
+        } else {
+            tsz = t1sz;
+            epd = extract32(tcr, 23, 1);
+            hpd = extract64(tcr, 42, 1);
+        }
+        /* For aarch32, hpd0 is not enabled without t2e as well.  */
+        hpd &= extract32(tcr, 6, 1);
+    }
+
+    return (ARMVAParameters) {
+        .tsz = tsz,
+        .select = select,
+        .epd = epd,
+        .hpd = hpd,
+    };
+}
+
 static bool get_phys_addr_lpae(CPUARMState *env, target_ulong address,
                                MMUAccessType access_type, ARMMMUIdx mmu_idx,
                                hwaddr *phys_ptr, MemTxAttrs *txattrs, int *prot,
@@ -9755,26 +9873,20 @@ static bool get_phys_addr_lpae(CPUARMState *env, target_ulong address,
     /* Read an LPAE long-descriptor translation table. */
     ARMFaultType fault_type = ARMFault_Translation;
     uint32_t level;
-    uint32_t epd = 0;
-    int32_t t0sz, t1sz;
-    uint32_t tg;
+    ARMVAParameters param;
     uint64_t ttbr;
-    int ttbr_select;
     hwaddr descaddr, indexmask, indexmask_grainsize;
     uint32_t tableattrs;
-    target_ulong page_size;
+    target_ulong page_size, top_bits;
     uint32_t attrs;
-    int32_t stride = 9;
-    int32_t addrsize;
-    int inputsize;
-    int32_t tbi = 0;
+    int32_t stride;
+    int addrsize, inputsize;
     TCR *tcr = regime_tcr(env, mmu_idx);
     int ap, ns, xn, pxn;
     uint32_t el = regime_el(env, mmu_idx);
-    bool ttbr1_valid = true;
+    bool ttbr1_valid;
     uint64_t descaddrmask;
     bool aarch64 = arm_el_is_aa64(env, el);
-    bool hpd = false;
 
     /* TODO:
      * This code does not handle the different format TCR for VTCR_EL2.
@@ -9783,91 +9895,44 @@ static bool get_phys_addr_lpae(CPUARMState *env, target_ulong address,
      * support for those page table walks.
      */
     if (aarch64) {
+        param = aa64_va_parameters(env, address, mmu_idx,
+                                   access_type != MMU_INST_FETCH);
         level = 0;
-        addrsize = 64;
-        if (el > 1) {
-            if (mmu_idx != ARMMMUIdx_S2NS) {
-                tbi = extract64(tcr->raw_tcr, 20, 1);
-            }
-        } else {
-            if (extract64(address, 55, 1)) {
-                tbi = extract64(tcr->raw_tcr, 38, 1);
-            } else {
-                tbi = extract64(tcr->raw_tcr, 37, 1);
-            }
-        }
-        tbi *= 8;
-
         /* If we are in 64-bit EL2 or EL3 then there is no TTBR1, so mark it
          * invalid.
          */
-        if (el > 1) {
-            ttbr1_valid = false;
-        }
+        ttbr1_valid = (el < 2);
+        addrsize = 64 - 8 * param.tbi;
+        inputsize = 64 - param.tsz;
     } else {
+        param = aa32_va_parameters(env, address, mmu_idx);
         level = 1;
-        addrsize = 32;
         /* There is no TTBR1 for EL2 */
-        if (el == 2) {
-            ttbr1_valid = false;
-        }
+        ttbr1_valid = (el != 2);
+        addrsize = (mmu_idx == ARMMMUIdx_S2NS ? 40 : 32);
+        inputsize = addrsize - param.tsz;
     }
 
-    /* Determine whether this address is in the region controlled by
-     * TTBR0 or TTBR1 (or if it is in neither region and should fault).
-     * This is a Non-secure PL0/1 stage 1 translation, so controlled by
-     * TTBCR/TTBR0/TTBR1 in accordance with ARM ARM DDI0406C table B-32:
+    /*
+     * We determined the region when collecting the parameters, but we
+     * have not yet validated that the address is valid for the region.
+     * Extract the top bits and verify that they all match select.
      */
-    if (aarch64) {
-        /* AArch64 translation.  */
-        t0sz = extract32(tcr->raw_tcr, 0, 6);
-        t0sz = MIN(t0sz, 39);
-        t0sz = MAX(t0sz, 16);
-    } else if (mmu_idx != ARMMMUIdx_S2NS) {
-        /* AArch32 stage 1 translation.  */
-        t0sz = extract32(tcr->raw_tcr, 0, 3);
-    } else {
-        /* AArch32 stage 2 translation.  */
-        bool sext = extract32(tcr->raw_tcr, 4, 1);
-        bool sign = extract32(tcr->raw_tcr, 3, 1);
-        /* Address size is 40-bit for a stage 2 translation,
-         * and t0sz can be negative (from -8 to 7),
-         * so we need to adjust it to use the TTBR selecting logic below.
-         */
-        addrsize = 40;
-        t0sz = sextract32(tcr->raw_tcr, 0, 4) + 8;
-
-        /* If the sign-extend bit is not the same as t0sz[3], the result
-         * is unpredictable. Flag this as a guest error.  */
-        if (sign != sext) {
-            qemu_log_mask(LOG_GUEST_ERROR,
-                          "AArch32: VTCR.S / VTCR.T0SZ[3] mismatch\n");
-        }
-    }
-    t1sz = extract32(tcr->raw_tcr, 16, 6);
-    if (aarch64) {
-        t1sz = MIN(t1sz, 39);
-        t1sz = MAX(t1sz, 16);
-    }
-    if (t0sz && !extract64(address, addrsize - t0sz, t0sz - tbi)) {
-        /* there is a ttbr0 region and we are in it (high bits all zero) */
-        ttbr_select = 0;
-    } else if (ttbr1_valid && t1sz &&
-               !extract64(~address, addrsize - t1sz, t1sz - tbi)) {
-        /* there is a ttbr1 region and we are in it (high bits all one) */
-        ttbr_select = 1;
-    } else if (!t0sz) {
-        /* ttbr0 region is "everything not in the ttbr1 region" */
-        ttbr_select = 0;
-    } else if (!t1sz && ttbr1_valid) {
-        /* ttbr1 region is "everything not in the ttbr0 region" */
-        ttbr_select = 1;
-    } else {
-        /* in the gap between the two regions, this is a Translation fault */
+    top_bits = sextract64(address, inputsize, addrsize - inputsize);
+    if (-top_bits != param.select || (param.select && !ttbr1_valid)) {
+        /* In the gap between the two regions, this is a Translation fault */
         fault_type = ARMFault_Translation;
         goto do_fault;
     }
 
+    if (param.using64k) {
+        stride = 13;
+    } else if (param.using16k) {
+        stride = 11;
+    } else {
+        stride = 9;
+    }
+
     /* Note that QEMU ignores shareability and cacheability attributes,
      * so we don't need to do anything with the SH, ORGN, IRGN fields
      * in the TTBCR.  Similarly, TTBCR:A1 selects whether we get the
@@ -9875,56 +9940,13 @@ static bool get_phys_addr_lpae(CPUARMState *env, target_ulong address,
      * implement any ASID-like capability so we can ignore it (instead
      * we will always flush the TLB any time the ASID is changed).
      */
-    if (ttbr_select == 0) {
-        ttbr = regime_ttbr(env, mmu_idx, 0);
-        if (el < 2) {
-            epd = extract32(tcr->raw_tcr, 7, 1);
-        }
-        inputsize = addrsize - t0sz;
-
-        tg = extract32(tcr->raw_tcr, 14, 2);
-        if (tg == 1) { /* 64KB pages */
-            stride = 13;
-        }
-        if (tg == 2) { /* 16KB pages */
-            stride = 11;
-        }
-        if (aarch64 && el > 1) {
-            hpd = extract64(tcr->raw_tcr, 24, 1);
-        } else {
-            hpd = extract64(tcr->raw_tcr, 41, 1);
-        }
-        if (!aarch64) {
-            /* For aarch32, hpd0 is not enabled without t2e as well.  */
-            hpd &= extract64(tcr->raw_tcr, 6, 1);
-        }
-    } else {
-        /* We should only be here if TTBR1 is valid */
-        assert(ttbr1_valid);
-
-        ttbr = regime_ttbr(env, mmu_idx, 1);
-        epd = extract32(tcr->raw_tcr, 23, 1);
-        inputsize = addrsize - t1sz;
-
-        tg = extract32(tcr->raw_tcr, 30, 2);
-        if (tg == 3)  { /* 64KB pages */
-            stride = 13;
-        }
-        if (tg == 1) { /* 16KB pages */
-            stride = 11;
-        }
-        hpd = extract64(tcr->raw_tcr, 42, 1);
-        if (!aarch64) {
-            /* For aarch32, hpd1 is not enabled without t2e as well.  */
-            hpd &= extract64(tcr->raw_tcr, 6, 1);
-        }
-    }
+    ttbr = regime_ttbr(env, mmu_idx, param.select);
 
     /* Here we should have set up all the parameters for the translation:
      * inputsize, ttbr, epd, stride, tbi
      */
 
-    if (epd) {
+    if (param.epd) {
         /* Translation table walk disabled => Translation fault on TLB miss
          * Note: This is always 0 on 64-bit EL2 and EL3.
          */
@@ -10037,7 +10059,7 @@ static bool get_phys_addr_lpae(CPUARMState *env, target_ulong address,
         }
         /* Merge in attributes from table descriptors */
         attrs |= nstable << 3; /* NS */
-        if (hpd) {
+        if (param.hpd) {
             /* HPD disables all the table attributes except NSTable.  */
             break;
         }
-- 
2.20.1

  parent reply	other threads:[~2019-01-18 14:58 UTC|newest]

Thread overview: 55+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-01-18 14:57 [Qemu-devel] [PULL 00/49] target-arm queue Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 01/49] hw/char/stm32f2xx_usart: Do not update data register when device is disabled Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 02/49] hw/arm/virt-acpi-build: Set COHACC override flag in IORT SMMUv3 node Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 03/49] target/arm: Allow Aarch32 exception return to switch from Mon->Hyp Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 04/49] ftgmac100: implement the new MDIO interface on Aspeed SoC Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 05/49] target/arm: Add state for the ARMv8.3-PAuth extension Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 06/49] target/arm: Add SCTLR bits through ARMv8.5 Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 07/49] target/arm: Add PAuth active bit to tbflags Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 08/49] target/arm: Introduce raise_exception_ra Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 09/49] target/arm: Add PAuth helpers Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 10/49] target/arm: Decode PAuth within system hint space Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 11/49] target/arm: Rearrange decode in disas_data_proc_1src Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 12/49] target/arm: Decode PAuth within disas_data_proc_1src Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 13/49] target/arm: Decode PAuth within disas_data_proc_2src Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 14/49] target/arm: Move helper_exception_return to helper-a64.c Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 15/49] target/arm: Add new_pc argument to helper_exception_return Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 16/49] target/arm: Rearrange decode in disas_uncond_b_reg Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 17/49] target/arm: Decode PAuth within disas_uncond_b_reg Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 18/49] target/arm: Decode Load/store register (pac) Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 19/49] target/arm: Move cpu_mmu_index out of line Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 20/49] target/arm: Introduce arm_mmu_idx Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 21/49] target/arm: Introduce arm_stage1_mmu_idx Peter Maydell
2019-01-18 14:57 ` Peter Maydell [this message]
2019-01-18 14:57 ` [Qemu-devel] [PULL 23/49] target/arm: Merge TBFLAG_AA_TB{0, 1} to TBII Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 24/49] target/arm: Export aa64_va_parameters to internals.h Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 25/49] target/arm: Add aa64_va_parameters_both Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 26/49] target/arm: Decode TBID from TCR Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 27/49] target/arm: Reuse aa64_va_parameters for setting tbflags Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 28/49] target/arm: Implement pauth_strip Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 29/49] target/arm: Implement pauth_auth Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 30/49] target/arm: Implement pauth_addpac Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 31/49] target/arm: Implement pauth_computepac Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 32/49] target/arm: Add PAuth system registers Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 33/49] target/arm: Enable PAuth for -cpu max Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 34/49] target/arm: Enable PAuth for user-only Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 35/49] target/arm: Tidy TBI handling in gen_a64_set_pc Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 36/49] migration: Add post_save function to VMStateDescription Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 37/49] target/arm: Reorganize PMCCNTR accesses Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 38/49] target/arm: Swap PMU values before/after migrations Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 39/49] target/arm: Filter cycle counter based on PMCCFILTR_EL0 Peter Maydell
2020-08-24 16:33   ` Peter Maydell
2020-08-25 14:41     ` Aaron Lindsay
2020-08-25 14:48     ` [PATCH] target/arm: Count PMU events when MDCR.SPME is set Aaron Lindsay
2020-09-11 14:13       ` Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 40/49] target/arm: Allow AArch32 access for PMCCFILTR Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 41/49] target/arm: Implement PMOVSSET Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 42/49] target/arm: Define FIELDs for ID_DFR0 Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 43/49] target/arm: Make PMCEID[01]_EL0 64 bit registers, add PMCEID[23] Peter Maydell
2019-01-18 14:58 ` [Qemu-devel] [PULL 44/49] target/arm: Add array for supported PMU events, generate PMCEID[01]_EL0 Peter Maydell
2019-01-18 14:58 ` [Qemu-devel] [PULL 45/49] target/arm: Finish implementation of PM[X]EVCNTR and PM[X]EVTYPER Peter Maydell
2019-01-18 14:58 ` [Qemu-devel] [PULL 46/49] target/arm: PMU: Add instruction and cycle events Peter Maydell
2019-01-18 14:58 ` [Qemu-devel] [PULL 47/49] target/arm: PMU: Set PMCR.N to 4 Peter Maydell
2019-01-18 14:58 ` [Qemu-devel] [PULL 48/49] target/arm: Implement PMSWINC Peter Maydell
2019-01-18 14:58 ` [Qemu-devel] [PULL 49/49] tests/libqtest: Introduce qtest_init_with_serial() Peter Maydell
2019-01-31 17:48 ` [Qemu-devel] [PULL 00/49] target-arm queue no-reply

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190118145805.6852-23-peter.maydell@linaro.org \
    --to=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).