qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Peter Maydell <peter.maydell@linaro.org>
To: qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 44/49] target/arm: Add array for supported PMU events, generate PMCEID[01]_EL0
Date: Fri, 18 Jan 2019 14:58:00 +0000	[thread overview]
Message-ID: <20190118145805.6852-45-peter.maydell@linaro.org> (raw)
In-Reply-To: <20190118145805.6852-1-peter.maydell@linaro.org>

From: Aaron Lindsay <aaron@os.amperecomputing.com>

This commit doesn't add any supported events, but provides the framework
for adding them. We store the pm_event structs in a simple array, and
provide the mapping from the event numbers to array indexes in the
supported_event_map array. Because the value of PMCEID[01] depends upon
which events are supported at runtime, generate it dynamically.

Signed-off-by: Aaron Lindsay <alindsay@codeaurora.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20181211151945.29137-10-aaron@os.amperecomputing.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/cpu.h    | 10 ++++++++
 target/arm/cpu.c    | 19 +++++++++------
 target/arm/cpu64.c  |  4 ----
 target/arm/helper.c | 57 +++++++++++++++++++++++++++++++++++++++++++++
 4 files changed, 79 insertions(+), 11 deletions(-)

diff --git a/target/arm/cpu.h b/target/arm/cpu.h
index 34c7fceefb9..396abf4f6cd 100644
--- a/target/arm/cpu.h
+++ b/target/arm/cpu.h
@@ -1008,6 +1008,16 @@ void pmu_op_finish(CPUARMState *env);
 void pmu_pre_el_change(ARMCPU *cpu, void *ignored);
 void pmu_post_el_change(ARMCPU *cpu, void *ignored);
 
+/*
+ * get_pmceid
+ * @env: CPUARMState
+ * @which: which PMCEID register to return (0 or 1)
+ *
+ * Return the PMCEID[01]_EL0 register values corresponding to the counters
+ * which are supported given the current configuration
+ */
+uint64_t get_pmceid(CPUARMState *env, unsigned which);
+
 /* SCTLR bit meanings. Several bits have been reused in newer
  * versions of the architecture; in that case we define constants
  * for both old and new bit meanings. Code which tests against those
diff --git a/target/arm/cpu.c b/target/arm/cpu.c
index 317e10c895b..7e1f3dd637a 100644
--- a/target/arm/cpu.c
+++ b/target/arm/cpu.c
@@ -1037,10 +1037,19 @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp)
 
     if (!cpu->has_pmu) {
         unset_feature(env, ARM_FEATURE_PMU);
+    }
+    if (arm_feature(env, ARM_FEATURE_PMU)) {
+        cpu->pmceid0 = get_pmceid(&cpu->env, 0);
+        cpu->pmceid1 = get_pmceid(&cpu->env, 1);
+
+        if (!kvm_enabled()) {
+            arm_register_pre_el_change_hook(cpu, &pmu_pre_el_change, 0);
+            arm_register_el_change_hook(cpu, &pmu_post_el_change, 0);
+        }
+    } else {
         cpu->id_aa64dfr0 &= ~0xf00;
-    } else if (!kvm_enabled()) {
-        arm_register_pre_el_change_hook(cpu, &pmu_pre_el_change, 0);
-        arm_register_el_change_hook(cpu, &pmu_post_el_change, 0);
+        cpu->pmceid0 = 0;
+        cpu->pmceid1 = 0;
     }
 
     if (!arm_feature(env, ARM_FEATURE_EL2)) {
@@ -1685,8 +1694,6 @@ static void cortex_a7_initfn(Object *obj)
     cpu->id_pfr0 = 0x00001131;
     cpu->id_pfr1 = 0x00011011;
     cpu->id_dfr0 = 0x02010555;
-    cpu->pmceid0 = 0x00000000;
-    cpu->pmceid1 = 0x00000000;
     cpu->id_afr0 = 0x00000000;
     cpu->id_mmfr0 = 0x10101105;
     cpu->id_mmfr1 = 0x40000000;
@@ -1732,8 +1739,6 @@ static void cortex_a15_initfn(Object *obj)
     cpu->id_pfr0 = 0x00001131;
     cpu->id_pfr1 = 0x00011011;
     cpu->id_dfr0 = 0x02010555;
-    cpu->pmceid0 = 0x0000000;
-    cpu->pmceid1 = 0x00000000;
     cpu->id_afr0 = 0x00000000;
     cpu->id_mmfr0 = 0x10201105;
     cpu->id_mmfr1 = 0x20000000;
diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c
index d0de0d5dcfa..e9bc461c362 100644
--- a/target/arm/cpu64.c
+++ b/target/arm/cpu64.c
@@ -138,8 +138,6 @@ static void aarch64_a57_initfn(Object *obj)
     cpu->isar.id_isar6 = 0;
     cpu->isar.id_aa64pfr0 = 0x00002222;
     cpu->id_aa64dfr0 = 0x10305106;
-    cpu->pmceid0 = 0x00000000;
-    cpu->pmceid1 = 0x00000000;
     cpu->isar.id_aa64isar0 = 0x00011120;
     cpu->isar.id_aa64mmfr0 = 0x00001124;
     cpu->dbgdidr = 0x3516d000;
@@ -246,8 +244,6 @@ static void aarch64_a72_initfn(Object *obj)
     cpu->isar.id_isar5 = 0x00011121;
     cpu->isar.id_aa64pfr0 = 0x00002222;
     cpu->id_aa64dfr0 = 0x10305106;
-    cpu->pmceid0 = 0x00000000;
-    cpu->pmceid1 = 0x00000000;
     cpu->isar.id_aa64isar0 = 0x00011120;
     cpu->isar.id_aa64mmfr0 = 0x00001124;
     cpu->dbgdidr = 0x3516d000;
diff --git a/target/arm/helper.c b/target/arm/helper.c
index 5c00e0164cc..1dc267de46b 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -1009,6 +1009,63 @@ static inline uint64_t pmu_counter_mask(CPUARMState *env)
   return (1 << 31) | ((1 << pmu_num_counters(env)) - 1);
 }
 
+typedef struct pm_event {
+    uint16_t number; /* PMEVTYPER.evtCount is 16 bits wide */
+    /* If the event is supported on this CPU (used to generate PMCEID[01]) */
+    bool (*supported)(CPUARMState *);
+    /*
+     * Retrieve the current count of the underlying event. The programmed
+     * counters hold a difference from the return value from this function
+     */
+    uint64_t (*get_count)(CPUARMState *);
+} pm_event;
+
+static const pm_event pm_events[] = {
+};
+
+/*
+ * Note: Before increasing MAX_EVENT_ID beyond 0x3f into the 0x40xx range of
+ * events (i.e. the statistical profiling extension), this implementation
+ * should first be updated to something sparse instead of the current
+ * supported_event_map[] array.
+ */
+#define MAX_EVENT_ID 0x0
+#define UNSUPPORTED_EVENT UINT16_MAX
+static uint16_t supported_event_map[MAX_EVENT_ID + 1];
+
+/*
+ * Called upon initialization to build PMCEID0_EL0 or PMCEID1_EL0 (indicated by
+ * 'which'). We also use it to build a map of ARM event numbers to indices in
+ * our pm_events array.
+ *
+ * Note: Events in the 0x40XX range are not currently supported.
+ */
+uint64_t get_pmceid(CPUARMState *env, unsigned which)
+{
+    uint64_t pmceid = 0;
+    unsigned int i;
+
+    assert(which <= 1);
+
+    for (i = 0; i < ARRAY_SIZE(supported_event_map); i++) {
+        supported_event_map[i] = UNSUPPORTED_EVENT;
+    }
+
+    for (i = 0; i < ARRAY_SIZE(pm_events); i++) {
+        const pm_event *cnt = &pm_events[i];
+        assert(cnt->number <= MAX_EVENT_ID);
+        /* We do not currently support events in the 0x40xx range */
+        assert(cnt->number <= 0x3f);
+
+        if ((cnt->number & 0x20) == (which << 6) &&
+                cnt->supported(env)) {
+            pmceid |= (1 << (cnt->number & 0x1f));
+            supported_event_map[cnt->number] = i;
+        }
+    }
+    return pmceid;
+}
+
 static CPAccessResult pmreg_access(CPUARMState *env, const ARMCPRegInfo *ri,
                                    bool isread)
 {
-- 
2.20.1

  parent reply	other threads:[~2019-01-18 14:59 UTC|newest]

Thread overview: 55+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-01-18 14:57 [Qemu-devel] [PULL 00/49] target-arm queue Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 01/49] hw/char/stm32f2xx_usart: Do not update data register when device is disabled Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 02/49] hw/arm/virt-acpi-build: Set COHACC override flag in IORT SMMUv3 node Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 03/49] target/arm: Allow Aarch32 exception return to switch from Mon->Hyp Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 04/49] ftgmac100: implement the new MDIO interface on Aspeed SoC Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 05/49] target/arm: Add state for the ARMv8.3-PAuth extension Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 06/49] target/arm: Add SCTLR bits through ARMv8.5 Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 07/49] target/arm: Add PAuth active bit to tbflags Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 08/49] target/arm: Introduce raise_exception_ra Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 09/49] target/arm: Add PAuth helpers Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 10/49] target/arm: Decode PAuth within system hint space Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 11/49] target/arm: Rearrange decode in disas_data_proc_1src Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 12/49] target/arm: Decode PAuth within disas_data_proc_1src Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 13/49] target/arm: Decode PAuth within disas_data_proc_2src Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 14/49] target/arm: Move helper_exception_return to helper-a64.c Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 15/49] target/arm: Add new_pc argument to helper_exception_return Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 16/49] target/arm: Rearrange decode in disas_uncond_b_reg Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 17/49] target/arm: Decode PAuth within disas_uncond_b_reg Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 18/49] target/arm: Decode Load/store register (pac) Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 19/49] target/arm: Move cpu_mmu_index out of line Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 20/49] target/arm: Introduce arm_mmu_idx Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 21/49] target/arm: Introduce arm_stage1_mmu_idx Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 22/49] target/arm: Create ARMVAParameters and helpers Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 23/49] target/arm: Merge TBFLAG_AA_TB{0, 1} to TBII Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 24/49] target/arm: Export aa64_va_parameters to internals.h Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 25/49] target/arm: Add aa64_va_parameters_both Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 26/49] target/arm: Decode TBID from TCR Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 27/49] target/arm: Reuse aa64_va_parameters for setting tbflags Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 28/49] target/arm: Implement pauth_strip Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 29/49] target/arm: Implement pauth_auth Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 30/49] target/arm: Implement pauth_addpac Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 31/49] target/arm: Implement pauth_computepac Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 32/49] target/arm: Add PAuth system registers Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 33/49] target/arm: Enable PAuth for -cpu max Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 34/49] target/arm: Enable PAuth for user-only Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 35/49] target/arm: Tidy TBI handling in gen_a64_set_pc Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 36/49] migration: Add post_save function to VMStateDescription Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 37/49] target/arm: Reorganize PMCCNTR accesses Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 38/49] target/arm: Swap PMU values before/after migrations Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 39/49] target/arm: Filter cycle counter based on PMCCFILTR_EL0 Peter Maydell
2020-08-24 16:33   ` Peter Maydell
2020-08-25 14:41     ` Aaron Lindsay
2020-08-25 14:48     ` [PATCH] target/arm: Count PMU events when MDCR.SPME is set Aaron Lindsay
2020-09-11 14:13       ` Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 40/49] target/arm: Allow AArch32 access for PMCCFILTR Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 41/49] target/arm: Implement PMOVSSET Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 42/49] target/arm: Define FIELDs for ID_DFR0 Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 43/49] target/arm: Make PMCEID[01]_EL0 64 bit registers, add PMCEID[23] Peter Maydell
2019-01-18 14:58 ` Peter Maydell [this message]
2019-01-18 14:58 ` [Qemu-devel] [PULL 45/49] target/arm: Finish implementation of PM[X]EVCNTR and PM[X]EVTYPER Peter Maydell
2019-01-18 14:58 ` [Qemu-devel] [PULL 46/49] target/arm: PMU: Add instruction and cycle events Peter Maydell
2019-01-18 14:58 ` [Qemu-devel] [PULL 47/49] target/arm: PMU: Set PMCR.N to 4 Peter Maydell
2019-01-18 14:58 ` [Qemu-devel] [PULL 48/49] target/arm: Implement PMSWINC Peter Maydell
2019-01-18 14:58 ` [Qemu-devel] [PULL 49/49] tests/libqtest: Introduce qtest_init_with_serial() Peter Maydell
2019-01-31 17:48 ` [Qemu-devel] [PULL 00/49] target-arm queue no-reply

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190118145805.6852-45-peter.maydell@linaro.org \
    --to=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).