From: Peter Maydell <peter.maydell@linaro.org>
To: qemu-arm@nongnu.org, qemu-devel@nongnu.org
Cc: patches@linaro.org
Subject: [Qemu-devel] [PATCH 07/23] hw/arm/iotkit: Rename files to hw/arm/armsse.[ch]
Date: Mon, 21 Jan 2019 18:51:02 +0000 [thread overview]
Message-ID: <20190121185118.18550-8-peter.maydell@linaro.org> (raw)
In-Reply-To: <20190121185118.18550-1-peter.maydell@linaro.org>
Rename the files that used to be iotkit.[ch] to
armsse.[ch] to reflect the fact they new cover
multiple Arm subsystems for embedded.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
hw/arm/Makefile.objs | 2 +-
include/hw/arm/{iotkit.h => armsse.h} | 4 ++--
hw/arm/{iotkit.c => armsse.c} | 2 +-
hw/arm/mps2-tz.c | 2 +-
MAINTAINERS | 4 ++--
default-configs/arm-softmmu.mak | 2 +-
6 files changed, 8 insertions(+), 8 deletions(-)
rename include/hw/arm/{iotkit.h => armsse.h} (99%)
rename hw/arm/{iotkit.c => armsse.c} (99%)
diff --git a/hw/arm/Makefile.objs b/hw/arm/Makefile.objs
index 50c7b4a927d..22b7f0ed0ba 100644
--- a/hw/arm/Makefile.objs
+++ b/hw/arm/Makefile.objs
@@ -34,7 +34,7 @@ obj-$(CONFIG_ASPEED_SOC) += aspeed_soc.o aspeed.o
obj-$(CONFIG_MPS2) += mps2.o
obj-$(CONFIG_MPS2) += mps2-tz.o
obj-$(CONFIG_MSF2) += msf2-soc.o msf2-som.o
-obj-$(CONFIG_IOTKIT) += iotkit.o
+obj-$(CONFIG_ARMSSE) += armsse.o
obj-$(CONFIG_FSL_IMX7) += fsl-imx7.o mcimx7d-sabre.o
obj-$(CONFIG_ARM_SMMUV3) += smmu-common.o smmuv3.o
obj-$(CONFIG_FSL_IMX6UL) += fsl-imx6ul.o mcimx6ul-evk.o
diff --git a/include/hw/arm/iotkit.h b/include/hw/arm/armsse.h
similarity index 99%
rename from include/hw/arm/iotkit.h
rename to include/hw/arm/armsse.h
index 521d1f73757..ff512054988 100644
--- a/include/hw/arm/iotkit.h
+++ b/include/hw/arm/armsse.h
@@ -58,8 +58,8 @@
* + named GPIO outputs mscexp_ns[0..15]
*/
-#ifndef IOTKIT_H
-#define IOTKIT_H
+#ifndef ARMSSE_H
+#define ARMSSE_H
#include "hw/sysbus.h"
#include "hw/arm/armv7m.h"
diff --git a/hw/arm/iotkit.c b/hw/arm/armsse.c
similarity index 99%
rename from hw/arm/iotkit.c
rename to hw/arm/armsse.c
index 7ff14fd5aef..8554be14128 100644
--- a/hw/arm/iotkit.c
+++ b/hw/arm/armsse.c
@@ -15,7 +15,7 @@
#include "trace.h"
#include "hw/sysbus.h"
#include "hw/registerfields.h"
-#include "hw/arm/iotkit.h"
+#include "hw/arm/armsse.h"
#include "hw/arm/arm.h"
struct ARMSSEInfo {
diff --git a/hw/arm/mps2-tz.c b/hw/arm/mps2-tz.c
index 5824335b4fb..3859f17d98b 100644
--- a/hw/arm/mps2-tz.c
+++ b/hw/arm/mps2-tz.c
@@ -46,7 +46,7 @@
#include "hw/misc/mps2-fpgaio.h"
#include "hw/misc/tz-mpc.h"
#include "hw/misc/tz-msc.h"
-#include "hw/arm/iotkit.h"
+#include "hw/arm/armsse.h"
#include "hw/dma/pl080.h"
#include "hw/ssi/pl022.h"
#include "hw/devices.h"
diff --git a/MAINTAINERS b/MAINTAINERS
index af339b86db7..52222117d77 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -625,8 +625,8 @@ F: hw/arm/mps2.c
F: hw/arm/mps2-tz.c
F: hw/misc/mps2-*.c
F: include/hw/misc/mps2-*.h
-F: hw/arm/iotkit.c
-F: include/hw/arm/iotkit.h
+F: hw/arm/armsse.c
+F: include/hw/arm/armsse.h
F: hw/misc/iotkit-secctl.c
F: include/hw/misc/iotkit-secctl.h
F: hw/misc/iotkit-sysctl.c
diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak
index 2420491aacd..3f200157879 100644
--- a/default-configs/arm-softmmu.mak
+++ b/default-configs/arm-softmmu.mak
@@ -114,7 +114,7 @@ CONFIG_MPS2_SCC=y
CONFIG_TZ_MPC=y
CONFIG_TZ_MSC=y
CONFIG_TZ_PPC=y
-CONFIG_IOTKIT=y
+CONFIG_ARMSSE=y
CONFIG_IOTKIT_SECCTL=y
CONFIG_IOTKIT_SYSCTL=y
CONFIG_IOTKIT_SYSINFO=y
--
2.20.1
next prev parent reply other threads:[~2019-01-21 19:08 UTC|newest]
Thread overview: 53+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-21 18:50 [Qemu-devel] [PATCH 00/23] arm: Implement MPS2 AN521 FPGA image Peter Maydell
2019-01-21 18:50 ` [Qemu-devel] [PATCH 01/23] armv7m: Don't assume the NVIC's CPU is CPU 0 Peter Maydell
2019-01-21 20:26 ` Philippe Mathieu-Daudé
2019-01-23 23:44 ` Richard Henderson
2019-01-21 18:50 ` [Qemu-devel] [PATCH 02/23] armv7m: Make cpu object a child of the armv7m container Peter Maydell
2019-01-21 20:30 ` Philippe Mathieu-Daudé
2019-01-23 23:44 ` Richard Henderson
2019-01-21 18:50 ` [Qemu-devel] [PATCH 03/23] armv7m: Pass through start-powered-off CPU property Peter Maydell
2019-01-23 23:45 ` Richard Henderson
2019-01-21 18:50 ` [Qemu-devel] [PATCH 04/23] hw/arm/iotkit: Rename IoTKit to ARMSSE Peter Maydell
2019-01-21 20:32 ` Philippe Mathieu-Daudé
2019-01-25 23:46 ` Richard Henderson
2019-01-21 18:51 ` [Qemu-devel] [PATCH 05/23] hw/arm/iotkit: Refactor into abstract base class and subclass Peter Maydell
2019-01-22 11:01 ` Philippe Mathieu-Daudé
2019-01-25 23:52 ` Richard Henderson
2019-01-21 18:51 ` [Qemu-devel] [PATCH 06/23] hw/arm/iotkit: Rename 'iotkit' local variables and functions Peter Maydell
2019-01-22 11:02 ` Philippe Mathieu-Daudé
2019-01-25 23:52 ` Richard Henderson
2019-01-21 18:51 ` Peter Maydell [this message]
2019-01-22 11:03 ` [Qemu-devel] [PATCH 07/23] hw/arm/iotkit: Rename files to hw/arm/armsse.[ch] Philippe Mathieu-Daudé
2019-01-26 0:01 ` Richard Henderson
2019-01-21 18:51 ` [Qemu-devel] [PATCH 08/23] hw/misc/iotkit-secctl: Support 4 internal MPCs Peter Maydell
2019-01-26 0:04 ` Richard Henderson
2019-01-21 18:51 ` [Qemu-devel] [PATCH 09/23] hw/arm/armsse: Make number of SRAM banks parameterised Peter Maydell
2019-01-26 0:06 ` Richard Henderson
2019-01-21 18:51 ` [Qemu-devel] [PATCH 10/23] hw/arm/armsse: Make SRAM bank size configurable Peter Maydell
2019-01-26 0:09 ` Richard Henderson
2019-01-21 18:51 ` [Qemu-devel] [PATCH 11/23] hw/arm/armsse: Support dual-CPU configuration Peter Maydell
2019-01-26 0:14 ` Richard Henderson
2019-01-21 18:51 ` [Qemu-devel] [PATCH 12/23] hw/arm/armsse: Give each CPU its own view of memory Peter Maydell
2019-01-26 0:24 ` Richard Henderson
2019-01-21 18:51 ` [Qemu-devel] [PATCH 13/23] hw/arm/armsse: Put each CPU in its own cluster object Peter Maydell
2019-01-26 0:29 ` Richard Henderson
2019-01-21 18:51 ` [Qemu-devel] [PATCH 14/23] iotkit-sysinfo: Make SYS_VERSION and SYS_CONFIG configurable Peter Maydell
2019-01-26 0:32 ` Richard Henderson
2019-01-21 18:51 ` [Qemu-devel] [PATCH 15/23] hw/arm/armsse: Add unimplemented-device stubs for MHUs Peter Maydell
2019-01-26 0:36 ` Richard Henderson
2019-01-21 18:51 ` [Qemu-devel] [PATCH 16/23] hw/arm/armsse: Add unimplemented-device stubs for PPUs Peter Maydell
2019-01-28 16:17 ` Richard Henderson
2019-01-21 18:51 ` [Qemu-devel] [PATCH 17/23] hw/arm/armsse: Add unimplemented-device stub for cache control registers Peter Maydell
2019-01-28 16:24 ` Richard Henderson
2019-01-21 18:51 ` [Qemu-devel] [PATCH 18/23] hw/arm/armsse: Add unimplemented-device stub for CPU local " Peter Maydell
2019-01-28 16:25 ` Richard Henderson
2019-01-21 18:51 ` [Qemu-devel] [PATCH 19/23] hw/misc/armsse-cpuid: Implement SSE-200 CPU_IDENTITY register block Peter Maydell
2019-01-28 16:26 ` Richard Henderson
2019-01-21 18:51 ` [Qemu-devel] [PATCH 20/23] hw/arm/armsse: Add CPU_IDENTITY block to SSE-200 Peter Maydell
2019-01-28 16:27 ` Richard Henderson
2019-01-21 18:51 ` [Qemu-devel] [PATCH 21/23] hw/arm/armsse: Add SSE-200 model Peter Maydell
2019-01-28 16:28 ` Richard Henderson
2019-01-21 18:51 ` [Qemu-devel] [PATCH 22/23] hw/arm/mps2-tz: Add IRQ infrastructure to support SSE-200 Peter Maydell
2019-01-28 16:31 ` Richard Henderson
2019-01-21 18:51 ` [Qemu-devel] [PATCH 23/23] hw/arm/mps2-tz: Add mps2-an521 model Peter Maydell
2019-01-28 16:33 ` Richard Henderson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190121185118.18550-8-peter.maydell@linaro.org \
--to=peter.maydell@linaro.org \
--cc=patches@linaro.org \
--cc=qemu-arm@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).