From: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
To: sagark@eecs.berkeley.edu, palmer@sifive.com,
kbastian@mail.uni-paderborn.de
Cc: richard.henderson@linaro.org, peer.adelt@hni.uni-paderborn.de,
qemu-riscv@nongnu.org, qemu-devel@nongnu.org
Subject: [Qemu-devel] [PATCH v5 32/35] target/riscv: Convert @cl_d, @cl_w, @cs_d, @cs_w insns
Date: Tue, 22 Jan 2019 10:29:06 +0100 [thread overview]
Message-ID: <20190122092909.5341-33-kbastian@mail.uni-paderborn.de> (raw)
In-Reply-To: <20190122092909.5341-1-kbastian@mail.uni-paderborn.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
---
target/riscv/insn16.decode | 20 ++++++++++----------
target/riscv/insn32.decode | 3 ++-
target/riscv/insn_trans/trans_rvc.inc.c | 24 ------------------------
3 files changed, 12 insertions(+), 35 deletions(-)
diff --git a/target/riscv/insn16.decode b/target/riscv/insn16.decode
index c7a58d80e5..c215867ff9 100644
--- a/target/riscv/insn16.decode
+++ b/target/riscv/insn16.decode
@@ -43,14 +43,14 @@
# Argument sets imported from insn32.decode:
&r rd rs1 rs2 !extern
+&i imm rs1 rd !extern
+&s imm rs1 rs2 !extern
# Argument sets:
&cl rs1 rd
-&cl_dw uimm rs1 rd
&ci imm rd
&ciw nzuimm rd
&cs rs1 rs2
-&cs_dw uimm rs1 rs2
&cb imm rs1
&cr rd rs2
&c_j imm
@@ -67,13 +67,13 @@
@cr .... ..... ..... .. &cr rs2=%rs2_5 %rd
@ci ... . ..... ..... .. &ci imm=%imm_ci %rd
@ciw ... ........ ... .. &ciw nzuimm=%nzuimm_ciw rd=%rs2_3
-@cl_d ... ... ... .. ... .. &cl_dw uimm=%uimm_cl_d rs1=%rs1_3 rd=%rs2_3
-@cl_w ... ... ... .. ... .. &cl_dw uimm=%uimm_cl_w rs1=%rs1_3 rd=%rs2_3
+@cl_d ... ... ... .. ... .. &i imm=%uimm_cl_d rs1=%rs1_3 rd=%rs2_3
+@cl_w ... ... ... .. ... .. &i imm=%uimm_cl_w rs1=%rs1_3 rd=%rs2_3
@cl ... ... ... .. ... .. &cl rs1=%rs1_3 rd=%rs2_3
@cs ... ... ... .. ... .. &cs rs1=%rs1_3 rs2=%rs2_3
@cs_2 ... ... ... .. ... .. &r rd=%rs1_3 rs1=%rs1_3 rs2=%rs2_3
-@cs_d ... ... ... .. ... .. &cs_dw uimm=%uimm_cl_d rs1=%rs1_3 rs2=%rs2_3
-@cs_w ... ... ... .. ... .. &cs_dw uimm=%uimm_cl_w rs1=%rs1_3 rs2=%rs2_3
+@cs_d ... ... ... .. ... .. &s imm=%uimm_cl_d rs1=%rs1_3 rs2=%rs2_3
+@cs_w ... ... ... .. ... .. &s imm=%uimm_cl_w rs1=%rs1_3 rs2=%rs2_3
@cb ... ... ... .. ... .. &cb imm=%imm_cb rs1=%rs1_3
@cj ... ........... .. &c_j imm=%imm_cj
@@ -95,11 +95,11 @@
# *** RV64C Standard Extension (Quadrant 0) ***
c_addi4spn 000 ........ ... 00 @ciw
-c_fld 001 ... ... .. ... 00 @cl_d
-c_lw 010 ... ... .. ... 00 @cl_w
+fld 001 ... ... .. ... 00 @cl_d
+lw 010 ... ... .. ... 00 @cl_w
c_flw_ld 011 --- ... -- ... 00 @cl #Note: Must parse uimm manually
-c_fsd 101 ... ... .. ... 00 @cs_d
-c_sw 110 ... ... .. ... 00 @cs_w
+fsd 101 ... ... .. ... 00 @cs_d
+sw 110 ... ... .. ... 00 @cs_w
c_fsw_sd 111 --- ... -- ... 00 @cs #Note: Must parse uimm manually
# *** RV64C Standard Extension (Quadrant 1) ***
diff --git a/target/riscv/insn32.decode b/target/riscv/insn32.decode
index 6f3ab7aa52..b59a00cc42 100644
--- a/target/riscv/insn32.decode
+++ b/target/riscv/insn32.decode
@@ -37,6 +37,7 @@
&b imm rs2 rs1
&i imm rs1 rd
&r rd rs1 rs2
+&s imm rs2 rs1
&shift shamt rs1 rd
&atomic aq rl rs2 rs1 rd
@@ -44,7 +45,7 @@
@r ....... ..... ..... ... ..... ....... &r %rs2 %rs1 %rd
@i ............ ..... ... ..... ....... &i imm=%imm_i %rs1 %rd
@b ....... ..... ..... ... ..... ....... &b imm=%imm_b %rs2 %rs1
-@s ....... ..... ..... ... ..... ....... imm=%imm_s %rs2 %rs1
+@s ....... ..... ..... ... ..... ....... &s imm=%imm_s %rs2 %rs1
@u .................... ..... ....... imm=%imm_u %rd
@j .................... ..... ....... imm=%imm_j %rd
diff --git a/target/riscv/insn_trans/trans_rvc.inc.c b/target/riscv/insn_trans/trans_rvc.inc.c
index 639c381edf..d932bfd3e0 100644
--- a/target/riscv/insn_trans/trans_rvc.inc.c
+++ b/target/riscv/insn_trans/trans_rvc.inc.c
@@ -28,18 +28,6 @@ static bool trans_c_addi4spn(DisasContext *ctx, arg_c_addi4spn *a)
return trans_addi(ctx, &arg);
}
-static bool trans_c_fld(DisasContext *ctx, arg_c_fld *a)
-{
- arg_fld arg = { .rd = a->rd, .rs1 = a->rs1, .imm = a->uimm };
- return trans_fld(ctx, &arg);
-}
-
-static bool trans_c_lw(DisasContext *ctx, arg_c_lw *a)
-{
- arg_lw arg = { .rd = a->rd, .rs1 = a->rs1, .imm = a->uimm };
- return trans_lw(ctx, &arg);
-}
-
static bool trans_c_flw_ld(DisasContext *ctx, arg_c_flw_ld *a)
{
#ifdef TARGET_RISCV32
@@ -51,18 +39,6 @@ static bool trans_c_flw_ld(DisasContext *ctx, arg_c_flw_ld *a)
#endif
}
-static bool trans_c_fsd(DisasContext *ctx, arg_c_fsd *a)
-{
- arg_fsd arg = { .rs1 = a->rs1, .rs2 = a->rs2, .imm = a->uimm };
- return trans_fsd(ctx, &arg);
-}
-
-static bool trans_c_sw(DisasContext *ctx, arg_c_sw *a)
-{
- arg_sw arg = { .rs1 = a->rs1, .rs2 = a->rs2, .imm = a->uimm };
- return trans_sw(ctx, &arg);
-}
-
static bool trans_c_fsw_sd(DisasContext *ctx, arg_c_fsw_sd *a)
{
#ifdef TARGET_RISCV32
--
2.20.1
next prev parent reply other threads:[~2019-01-22 9:37 UTC|newest]
Thread overview: 82+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-22 9:28 [Qemu-devel] [PATCH v5 00/35] target/riscv: Convert to decodetree Bastian Koppelmann
2019-01-22 9:28 ` [Qemu-devel] [PATCH v5 01/35] target/riscv: Move CPURISCVState pointer to DisasContext Bastian Koppelmann
2019-01-22 9:28 ` [Qemu-devel] [PATCH v5 02/35] target/riscv: Activate decodetree and implemnt LUI & AUIPC Bastian Koppelmann
2019-01-22 9:28 ` [Qemu-devel] [PATCH v5 03/35] target/riscv: Convert RVXI branch insns to decodetree Bastian Koppelmann
2019-01-22 23:03 ` Alistair Francis
2019-01-22 9:28 ` [Qemu-devel] [PATCH v5 04/35] target/riscv: Convert RV32I load/store " Bastian Koppelmann
2019-01-22 23:38 ` Alistair Francis
2019-01-22 9:28 ` [Qemu-devel] [PATCH v5 05/35] target/riscv: Convert RV64I " Bastian Koppelmann
2019-01-22 9:28 ` [Qemu-devel] [PATCH v5 06/35] target/riscv: Convert RVXI arithmetic " Bastian Koppelmann
2019-01-22 9:28 ` [Qemu-devel] [PATCH v5 07/35] target/riscv: Convert RVXI fence " Bastian Koppelmann
2019-01-22 9:28 ` [Qemu-devel] [PATCH v5 08/35] target/riscv: Convert RVXI csr " Bastian Koppelmann
2019-01-22 9:28 ` [Qemu-devel] [PATCH v5 09/35] target/riscv: Convert RVXM " Bastian Koppelmann
2019-01-22 9:28 ` [Qemu-devel] [PATCH v5 10/35] target/riscv: Convert RV32A " Bastian Koppelmann
2019-01-22 23:43 ` Alistair Francis
2019-01-22 9:28 ` [Qemu-devel] [PATCH v5 11/35] target/riscv: Convert RV64A " Bastian Koppelmann
2019-01-22 9:28 ` [Qemu-devel] [PATCH v5 12/35] target/riscv: Convert RV32F " Bastian Koppelmann
2019-01-23 0:00 ` Alistair Francis
2019-01-22 9:28 ` [Qemu-devel] [PATCH v5 13/35] target/riscv: Convert RV64F " Bastian Koppelmann
2019-01-23 0:08 ` Alistair Francis
2019-01-22 9:28 ` [Qemu-devel] [PATCH v5 14/35] target/riscv: Convert RV32D " Bastian Koppelmann
2019-01-23 0:08 ` Alistair Francis
2019-01-22 9:28 ` [Qemu-devel] [PATCH v5 15/35] target/riscv: Convert RV64D " Bastian Koppelmann
2019-01-23 0:10 ` Alistair Francis
2019-01-22 9:28 ` [Qemu-devel] [PATCH v5 16/35] target/riscv: Convert RV priv " Bastian Koppelmann
2019-01-23 1:00 ` Alistair Francis
2019-01-22 9:28 ` [Qemu-devel] [PATCH v5 17/35] target/riscv: Convert quadrant 0 of RVXC " Bastian Koppelmann
2019-01-22 9:28 ` [Qemu-devel] [PATCH v5 18/35] target/riscv: Convert quadrant 1 " Bastian Koppelmann
2019-01-22 9:28 ` [Qemu-devel] [PATCH v5 19/35] target/riscv: Convert quadrant 2 " Bastian Koppelmann
2019-01-22 21:32 ` Richard Henderson
2019-01-22 9:28 ` [Qemu-devel] [PATCH v5 20/35] target/riscv: Remove gen_jalr() Bastian Koppelmann
2019-01-22 9:28 ` [Qemu-devel] [PATCH v5 21/35] target/riscv: Remove manual decoding from gen_branch() Bastian Koppelmann
2019-01-22 9:28 ` [Qemu-devel] [PATCH v5 22/35] target/riscv: Remove manual decoding from gen_load() Bastian Koppelmann
2019-01-22 9:28 ` [Qemu-devel] [PATCH v5 23/35] target/riscv: Remove manual decoding from gen_store() Bastian Koppelmann
2019-01-22 9:28 ` [Qemu-devel] [PATCH v5 24/35] target/riscv: Move gen_arith_imm() decoding into trans_* functions Bastian Koppelmann
2019-01-22 21:36 ` Richard Henderson
2019-01-22 9:28 ` [Qemu-devel] [PATCH v5 25/35] target/riscv: make ADD/SUB/OR/XOR/AND insn use arg lists Bastian Koppelmann
2019-01-22 9:29 ` [Qemu-devel] [PATCH v5 26/35] target/riscv: Remove shift and slt insn manual decoding Bastian Koppelmann
2019-01-22 9:29 ` [Qemu-devel] [PATCH v5 27/35] target/riscv: Remove manual decoding of RV32/64M insn Bastian Koppelmann
2019-01-22 9:29 ` [Qemu-devel] [PATCH v5 28/35] target/riscv: Rename trans_arith to gen_arith Bastian Koppelmann
2019-01-22 9:29 ` [Qemu-devel] [PATCH v5 29/35] target/riscv: Remove gen_system() Bastian Koppelmann
2019-01-22 9:29 ` [Qemu-devel] [PATCH v5 30/35] target/riscv: Remove decode_RV32_64G() Bastian Koppelmann
2019-01-22 9:29 ` [Qemu-devel] [PATCH v5 31/35] target/riscv: Convert @cs_2 insns to share translation functions Bastian Koppelmann
2019-01-22 9:29 ` Bastian Koppelmann [this message]
2019-01-22 9:29 ` [Qemu-devel] [PATCH v5 33/35] target/riscv: Splice fsw_sd and flw_ld for riscv32 vs riscv64 Bastian Koppelmann
2019-01-22 9:29 ` [Qemu-devel] [PATCH v5 34/35] target/riscv: Splice remaining compressed insn pairs " Bastian Koppelmann
2019-01-22 9:29 ` [Qemu-devel] [PATCH v5 35/35] target/riscv: Remaining rvc insn reuse 32 bit translators Bastian Koppelmann
2019-01-22 21:38 ` [Qemu-devel] [PATCH v5 00/35] target/riscv: Convert to decodetree Richard Henderson
2019-01-23 9:15 ` Bastian Koppelmann
2019-01-23 21:22 ` Alistair Francis
2019-01-25 23:54 ` Palmer Dabbelt
2019-01-26 8:51 ` Bastian Koppelmann
2019-01-29 19:22 ` Palmer Dabbelt
2019-01-29 21:13 ` Alistair Francis
2019-01-30 9:08 ` Bastian Koppelmann
2019-01-30 18:47 ` Palmer Dabbelt
2019-01-31 18:06 ` no-reply
2019-01-31 18:48 ` no-reply
2019-01-31 18:48 ` no-reply
2019-01-31 18:51 ` no-reply
2019-01-31 19:00 ` no-reply
2019-01-31 19:08 ` no-reply
2019-01-31 19:12 ` no-reply
2019-01-31 21:00 ` no-reply
2019-01-31 21:01 ` no-reply
2019-01-31 21:04 ` no-reply
2019-01-31 21:09 ` no-reply
2019-01-31 21:10 ` no-reply
2019-01-31 21:11 ` no-reply
2019-01-31 21:12 ` no-reply
2019-01-31 21:15 ` no-reply
2019-01-31 21:15 ` no-reply
2019-01-31 21:18 ` no-reply
2019-01-31 21:19 ` no-reply
2019-01-31 21:20 ` no-reply
2019-01-31 21:22 ` no-reply
2019-01-31 21:23 ` no-reply
2019-01-31 21:25 ` no-reply
2019-01-31 21:26 ` no-reply
2019-01-31 21:27 ` no-reply
2019-01-31 21:37 ` no-reply
2019-01-31 21:38 ` no-reply
2019-01-31 21:41 ` no-reply
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190122092909.5341-33-kbastian@mail.uni-paderborn.de \
--to=kbastian@mail.uni-paderborn.de \
--cc=palmer@sifive.com \
--cc=peer.adelt@hni.uni-paderborn.de \
--cc=qemu-devel@nongnu.org \
--cc=qemu-riscv@nongnu.org \
--cc=richard.henderson@linaro.org \
--cc=sagark@eecs.berkeley.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).