qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
To: sagark@eecs.berkeley.edu, palmer@sifive.com,
	kbastian@mail.uni-paderborn.de
Cc: qemu-riscv@nongnu.org, peer.adelt@hni.uni-paderborn.de,
	richard.henderson@linaro.org, qemu-devel@nongnu.org
Subject: [Qemu-devel] [PATCH v6 00/35] target/riscv: Convert to decodetree
Date: Wed, 23 Jan 2019 10:25:03 +0100	[thread overview]
Message-ID: <20190123092538.8004-1-kbastian@mail.uni-paderborn.de> (raw)

Hi,

this patchset converts the RISC-V decoder to decodetree in four major steps:

1) Convert 32-bit instructions to decodetree [Patch 1-16]:
    Many of the gen_* functions are called by the decode functions for 16-bit
    and 32-bit functions. If we move translation code from the gen_*
    functions to the generated trans_* functions of decode-tree, we get a lot of
    duplication. Therefore, we mostly generate calls to the old gen_* function
    which are properly replaced after step 2).

    Each of the trans_ functions are grouped into files corresponding to their
    ISA extension, e.g. addi which is in RV32I is translated in the file
    'trans_rvi.inc.c'.

2) Convert 16-bit instructions to decodetree [Patch 17-19]:
    All 16 bit instructions have a direct mapping to a 32 bit instruction. Thus,
    we convert the arguments in the 16 bit trans_ function to the arguments of
    the corresponding 32 bit instruction and call the 32 bit trans_ function.

3) Remove old manual decoding in gen_* function [Patch 20-30]:
    this move all manual translation code into the trans_* instructions of
    decode tree, such that we can remove the old decode_* functions.

4) Simplify RVC by reusing as much as possible from the RVG decoder as suggested
   by Richard. [Patch 31-35]

full tree available at
https://github.com/bkoppelmann/qemu/tree/riscv-dt-v6

Cheers,
Bastian

v5 -> v6:
    - fixed funky indentation


Bastian Koppelmann (35):
  target/riscv: Move CPURISCVState pointer to DisasContext
  target/riscv: Activate decodetree and implemnt LUI & AUIPC
  target/riscv: Convert RVXI branch insns to decodetree
  target/riscv: Convert RV32I load/store insns to decodetree
  target/riscv: Convert RV64I load/store insns to decodetree
  target/riscv: Convert RVXI arithmetic insns to decodetree
  target/riscv: Convert RVXI fence insns to decodetree
  target/riscv: Convert RVXI csr insns to decodetree
  target/riscv: Convert RVXM insns to decodetree
  target/riscv: Convert RV32A insns to decodetree
  target/riscv: Convert RV64A insns to decodetree
  target/riscv: Convert RV32F insns to decodetree
  target/riscv: Convert RV64F insns to decodetree
  target/riscv: Convert RV32D insns to decodetree
  target/riscv: Convert RV64D insns to decodetree
  target/riscv: Convert RV priv insns to decodetree
  target/riscv: Convert quadrant 0 of RVXC insns to decodetree
  target/riscv: Convert quadrant 1 of RVXC insns to decodetree
  target/riscv: Convert quadrant 2 of RVXC insns to decodetree
  target/riscv: Remove gen_jalr()
  target/riscv: Remove manual decoding from gen_branch()
  target/riscv: Remove manual decoding from gen_load()
  target/riscv: Remove manual decoding from gen_store()
  target/riscv: Move gen_arith_imm() decoding into trans_* functions
  target/riscv: make ADD/SUB/OR/XOR/AND insn use arg lists
  target/riscv: Remove shift and slt insn manual decoding
  target/riscv: Remove manual decoding of RV32/64M insn
  target/riscv: Rename trans_arith to gen_arith
  target/riscv: Remove gen_system()
  target/riscv: Remove decode_RV32_64G()
  target/riscv: Convert @cs_2 insns to share translation functions
  target/riscv: Convert @cl_d, @cl_w, @cs_d, @cs_w insns
  target/riscv: Splice fsw_sd and flw_ld for riscv32 vs riscv64
  target/riscv: Splice remaining compressed insn pairs for riscv32 vs
    riscv64
  target/riscv: Remaining rvc insn reuse 32 bit translators

 target/riscv/Makefile.objs                    |   22 +
 target/riscv/insn16-32.decode                 |   31 +
 target/riscv/insn16-64.decode                 |   33 +
 target/riscv/insn16.decode                    |  114 ++
 target/riscv/insn32-64.decode                 |   72 +
 target/riscv/insn32.decode                    |  203 ++
 .../riscv/insn_trans/trans_privileged.inc.c   |  110 +
 target/riscv/insn_trans/trans_rva.inc.c       |  207 ++
 target/riscv/insn_trans/trans_rvc.inc.c       |  149 ++
 target/riscv/insn_trans/trans_rvd.inc.c       |  388 ++++
 target/riscv/insn_trans/trans_rvf.inc.c       |  388 ++++
 target/riscv/insn_trans/trans_rvi.inc.c       |  568 ++++++
 target/riscv/insn_trans/trans_rvm.inc.c       |  107 +
 target/riscv/translate.c                      | 1781 ++---------------
 14 files changed, 2611 insertions(+), 1562 deletions(-)
 create mode 100644 target/riscv/insn16-32.decode
 create mode 100644 target/riscv/insn16-64.decode
 create mode 100644 target/riscv/insn16.decode
 create mode 100644 target/riscv/insn32-64.decode
 create mode 100644 target/riscv/insn32.decode
 create mode 100644 target/riscv/insn_trans/trans_privileged.inc.c
 create mode 100644 target/riscv/insn_trans/trans_rva.inc.c
 create mode 100644 target/riscv/insn_trans/trans_rvc.inc.c
 create mode 100644 target/riscv/insn_trans/trans_rvd.inc.c
 create mode 100644 target/riscv/insn_trans/trans_rvf.inc.c
 create mode 100644 target/riscv/insn_trans/trans_rvi.inc.c
 create mode 100644 target/riscv/insn_trans/trans_rvm.inc.c

-- 
2.20.1

             reply	other threads:[~2019-01-23  9:26 UTC|newest]

Thread overview: 50+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-01-23  9:25 Bastian Koppelmann [this message]
2019-01-23  9:25 ` [Qemu-devel] [PATCH v6 01/35] target/riscv: Move CPURISCVState pointer to DisasContext Bastian Koppelmann
2019-01-23  9:25 ` [Qemu-devel] [PATCH v6 02/35] target/riscv: Activate decodetree and implemnt LUI & AUIPC Bastian Koppelmann
2019-01-23  9:25 ` [Qemu-devel] [PATCH v6 03/35] target/riscv: Convert RVXI branch insns to decodetree Bastian Koppelmann
2019-01-23  9:25 ` [Qemu-devel] [PATCH v6 04/35] target/riscv: Convert RV32I load/store " Bastian Koppelmann
2019-01-23  9:25 ` [Qemu-devel] [PATCH v6 05/35] target/riscv: Convert RV64I " Bastian Koppelmann
2019-01-23  9:25 ` [Qemu-devel] [PATCH v6 06/35] target/riscv: Convert RVXI arithmetic " Bastian Koppelmann
2019-01-23  9:25 ` [Qemu-devel] [PATCH v6 07/35] target/riscv: Convert RVXI fence " Bastian Koppelmann
2019-01-23  9:25 ` [Qemu-devel] [PATCH v6 08/35] target/riscv: Convert RVXI csr " Bastian Koppelmann
2019-01-23  9:25 ` [Qemu-devel] [PATCH v6 09/35] target/riscv: Convert RVXM " Bastian Koppelmann
2019-01-23  9:25 ` [Qemu-devel] [PATCH v6 10/35] target/riscv: Convert RV32A " Bastian Koppelmann
2019-01-23  9:25 ` [Qemu-devel] [PATCH v6 11/35] target/riscv: Convert RV64A " Bastian Koppelmann
2019-01-23  9:25 ` [Qemu-devel] [PATCH v6 12/35] target/riscv: Convert RV32F " Bastian Koppelmann
2019-01-23  9:25 ` [Qemu-devel] [PATCH v6 13/35] target/riscv: Convert RV64F " Bastian Koppelmann
2019-01-23  9:25 ` [Qemu-devel] [PATCH v6 14/35] target/riscv: Convert RV32D " Bastian Koppelmann
2019-01-23  9:25 ` [Qemu-devel] [PATCH v6 15/35] target/riscv: Convert RV64D " Bastian Koppelmann
2019-01-23  9:25 ` [Qemu-devel] [PATCH v6 16/35] target/riscv: Convert RV priv " Bastian Koppelmann
2019-01-23  9:25 ` [Qemu-devel] [PATCH v6 17/35] target/riscv: Convert quadrant 0 of RVXC " Bastian Koppelmann
2019-01-23  9:25 ` [Qemu-devel] [PATCH v6 18/35] target/riscv: Convert quadrant 1 " Bastian Koppelmann
2019-01-23  9:25 ` [Qemu-devel] [PATCH v6 19/35] target/riscv: Convert quadrant 2 " Bastian Koppelmann
2019-01-23  9:25 ` [Qemu-devel] [PATCH v6 20/35] target/riscv: Remove gen_jalr() Bastian Koppelmann
2019-01-23  9:25 ` [Qemu-devel] [PATCH v6 21/35] target/riscv: Remove manual decoding from gen_branch() Bastian Koppelmann
2019-01-25 22:23   ` Alistair
2019-01-23  9:25 ` [Qemu-devel] [PATCH v6 22/35] target/riscv: Remove manual decoding from gen_load() Bastian Koppelmann
2019-01-25 22:23   ` Alistair
2019-01-23  9:25 ` [Qemu-devel] [PATCH v6 23/35] target/riscv: Remove manual decoding from gen_store() Bastian Koppelmann
2019-01-25 22:25   ` Alistair
2019-01-23  9:25 ` [Qemu-devel] [PATCH v6 24/35] target/riscv: Move gen_arith_imm() decoding into trans_* functions Bastian Koppelmann
2019-01-25 22:27   ` Alistair
2019-01-23  9:25 ` [Qemu-devel] [PATCH v6 25/35] target/riscv: make ADD/SUB/OR/XOR/AND insn use arg lists Bastian Koppelmann
2019-01-23  9:25 ` [Qemu-devel] [PATCH v6 26/35] target/riscv: Remove shift and slt insn manual decoding Bastian Koppelmann
2019-01-23  9:25 ` [Qemu-devel] [PATCH v6 27/35] target/riscv: Remove manual decoding of RV32/64M insn Bastian Koppelmann
2019-01-23  9:25 ` [Qemu-devel] [PATCH v6 28/35] target/riscv: Rename trans_arith to gen_arith Bastian Koppelmann
2019-01-25 22:28   ` Alistair
2019-01-23  9:25 ` [Qemu-devel] [PATCH v6 29/35] target/riscv: Remove gen_system() Bastian Koppelmann
2019-01-23  9:25 ` [Qemu-devel] [PATCH v6 30/35] target/riscv: Remove decode_RV32_64G() Bastian Koppelmann
2019-01-25 22:29   ` Alistair
2019-01-23  9:25 ` [Qemu-devel] [PATCH v6 31/35] target/riscv: Convert @cs_2 insns to share translation functions Bastian Koppelmann
2019-01-23  9:25 ` [Qemu-devel] [PATCH v6 32/35] target/riscv: Convert @cl_d, @cl_w, @cs_d, @cs_w insns Bastian Koppelmann
2019-01-23  9:25 ` [Qemu-devel] [PATCH v6 33/35] target/riscv: Splice fsw_sd and flw_ld for riscv32 vs riscv64 Bastian Koppelmann
2019-01-23  9:25 ` [Qemu-devel] [PATCH v6 34/35] target/riscv: Splice remaining compressed insn pairs " Bastian Koppelmann
2019-01-23  9:25 ` [Qemu-devel] [PATCH v6 35/35] target/riscv: Remaining rvc insn reuse 32 bit translators Bastian Koppelmann
2019-01-31 17:50 ` [Qemu-devel] [PATCH v6 00/35] target/riscv: Convert to decodetree no-reply
2019-01-31 18:18 ` no-reply
2019-01-31 18:22 ` no-reply
2019-02-12 23:21 ` Palmer Dabbelt
2019-02-13  2:15   ` Palmer Dabbelt
2019-02-13  9:06     ` Bastian Koppelmann
2019-02-13 15:34       ` Palmer Dabbelt
2019-02-14  0:37       ` Palmer Dabbelt

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190123092538.8004-1-kbastian@mail.uni-paderborn.de \
    --to=kbastian@mail.uni-paderborn.de \
    --cc=palmer@sifive.com \
    --cc=peer.adelt@hni.uni-paderborn.de \
    --cc=qemu-devel@nongnu.org \
    --cc=qemu-riscv@nongnu.org \
    --cc=richard.henderson@linaro.org \
    --cc=sagark@eecs.berkeley.edu \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).