From: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
To: sagark@eecs.berkeley.edu, palmer@sifive.com,
kbastian@mail.uni-paderborn.de
Cc: qemu-riscv@nongnu.org, peer.adelt@hni.uni-paderborn.de,
richard.henderson@linaro.org, qemu-devel@nongnu.org,
Alistair Francis <alistair.francis@wdc.com>
Subject: [Qemu-devel] [PATCH v6 05/35] target/riscv: Convert RV64I load/store insns to decodetree
Date: Wed, 23 Jan 2019 10:25:08 +0100 [thread overview]
Message-ID: <20190123092538.8004-6-kbastian@mail.uni-paderborn.de> (raw)
In-Reply-To: <20190123092538.8004-1-kbastian@mail.uni-paderborn.de>
this splits the 64-bit only instructions into its own decode file such
that we generate the decoder for these instructions only for the RISC-V
64 bit target.
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Peer Adelt <peer.adelt@hni.uni-paderborn.de>
---
target/riscv/Makefile.objs | 8 +++++---
target/riscv/insn32-64.decode | 25 +++++++++++++++++++++++++
target/riscv/insn_trans/trans_rvi.inc.c | 20 ++++++++++++++++++++
target/riscv/translate.c | 7 -------
4 files changed, 50 insertions(+), 10 deletions(-)
create mode 100644 target/riscv/insn32-64.decode
diff --git a/target/riscv/Makefile.objs b/target/riscv/Makefile.objs
index bf0a268033..05087a91bb 100644
--- a/target/riscv/Makefile.objs
+++ b/target/riscv/Makefile.objs
@@ -2,10 +2,12 @@ obj-y += translate.o op_helper.o cpu_helper.o cpu.o csr.o fpu_helper.o gdbstub.o
DECODETREE = $(SRC_PATH)/scripts/decodetree.py
-target/riscv/decode_insn32.inc.c: \
- $(SRC_PATH)/target/riscv/insn32.decode $(DECODETREE)
+decode32-y = $(SRC_PATH)/target/riscv/insn32.decode
+decode32-$(TARGET_RISCV64) += $(SRC_PATH)/target/riscv/insn32-64.decode
+
+target/riscv/decode_insn32.inc.c: $(decode32-y) $(DECODETREE)
$(call quiet-command, \
- $(PYTHON) $(DECODETREE) -o $@ --decode decode_insn32 $<, \
+ $(PYTHON) $(DECODETREE) -o $@ --decode decode_insn32 $(decode32-y), \
"GEN", $(TARGET_DIR)$@)
target/riscv/translate.o: target/riscv/decode_insn32.inc.c
diff --git a/target/riscv/insn32-64.decode b/target/riscv/insn32-64.decode
new file mode 100644
index 0000000000..439d4e2c58
--- /dev/null
+++ b/target/riscv/insn32-64.decode
@@ -0,0 +1,25 @@
+#
+# RISC-V translation routines for the RV Instruction Set.
+#
+# Copyright (c) 2018 Peer Adelt, peer.adelt@hni.uni-paderborn.de
+# Bastian Koppelmann, kbastian@mail.uni-paderborn.de
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms and conditions of the GNU General Public License,
+# version 2 or later, as published by the Free Software Foundation.
+#
+# This program is distributed in the hope it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+# more details.
+#
+# You should have received a copy of the GNU General Public License along with
+# this program. If not, see <http://www.gnu.org/licenses/>.
+
+# This is concatenated with insn32.decode for risc64 targets.
+# Most of the fields and formats are there.
+
+# *** RV64I Base Instruction Set (in addition to RV32I) ***
+lwu ............ ..... 110 ..... 0000011 @i
+ld ............ ..... 011 ..... 0000011 @i
+sd ....... ..... ..... 011 ..... 0100011 @s
diff --git a/target/riscv/insn_trans/trans_rvi.inc.c b/target/riscv/insn_trans/trans_rvi.inc.c
index f3b88ebb69..39a20a70e8 100644
--- a/target/riscv/insn_trans/trans_rvi.inc.c
+++ b/target/riscv/insn_trans/trans_rvi.inc.c
@@ -130,3 +130,23 @@ static bool trans_sw(DisasContext *ctx, arg_sw *a)
gen_store(ctx, OPC_RISC_SW, a->rs1, a->rs2, a->imm);
return true;
}
+
+#ifdef TARGET_RISCV64
+static bool trans_lwu(DisasContext *ctx, arg_lwu *a)
+{
+ gen_load(ctx, OPC_RISC_LWU, a->rd, a->rs1, a->imm);
+ return true;
+}
+
+static bool trans_ld(DisasContext *ctx, arg_ld *a)
+{
+ gen_load(ctx, OPC_RISC_LD, a->rd, a->rs1, a->imm);
+ return true;
+}
+
+static bool trans_sd(DisasContext *ctx, arg_sd *a)
+{
+ gen_store(ctx, OPC_RISC_SD, a->rs1, a->rs2, a->imm);
+ return true;
+}
+#endif
diff --git a/target/riscv/translate.c b/target/riscv/translate.c
index b81297f23e..609207f785 100644
--- a/target/riscv/translate.c
+++ b/target/riscv/translate.c
@@ -1711,13 +1711,6 @@ static void decode_RV32_64G(CPURISCVState *env, DisasContext *ctx)
imm = GET_IMM(ctx->opcode);
switch (op) {
- case OPC_RISC_LOAD:
- gen_load(ctx, MASK_OP_LOAD(ctx->opcode), rd, rs1, imm);
- break;
- case OPC_RISC_STORE:
- gen_store(ctx, MASK_OP_STORE(ctx->opcode), rs1, rs2,
- GET_STORE_IMM(ctx->opcode));
- break;
case OPC_RISC_ARITH_IMM:
#if defined(TARGET_RISCV64)
case OPC_RISC_ARITH_IMM_W:
--
2.20.1
next prev parent reply other threads:[~2019-01-23 9:26 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-23 9:25 [Qemu-devel] [PATCH v6 00/35] target/riscv: Convert to decodetree Bastian Koppelmann
2019-01-23 9:25 ` [Qemu-devel] [PATCH v6 01/35] target/riscv: Move CPURISCVState pointer to DisasContext Bastian Koppelmann
2019-01-23 9:25 ` [Qemu-devel] [PATCH v6 02/35] target/riscv: Activate decodetree and implemnt LUI & AUIPC Bastian Koppelmann
2019-01-23 9:25 ` [Qemu-devel] [PATCH v6 03/35] target/riscv: Convert RVXI branch insns to decodetree Bastian Koppelmann
2019-01-23 9:25 ` [Qemu-devel] [PATCH v6 04/35] target/riscv: Convert RV32I load/store " Bastian Koppelmann
2019-01-23 9:25 ` Bastian Koppelmann [this message]
2019-01-23 9:25 ` [Qemu-devel] [PATCH v6 06/35] target/riscv: Convert RVXI arithmetic " Bastian Koppelmann
2019-01-23 9:25 ` [Qemu-devel] [PATCH v6 07/35] target/riscv: Convert RVXI fence " Bastian Koppelmann
2019-01-23 9:25 ` [Qemu-devel] [PATCH v6 08/35] target/riscv: Convert RVXI csr " Bastian Koppelmann
2019-01-23 9:25 ` [Qemu-devel] [PATCH v6 09/35] target/riscv: Convert RVXM " Bastian Koppelmann
2019-01-23 9:25 ` [Qemu-devel] [PATCH v6 10/35] target/riscv: Convert RV32A " Bastian Koppelmann
2019-01-23 9:25 ` [Qemu-devel] [PATCH v6 11/35] target/riscv: Convert RV64A " Bastian Koppelmann
2019-01-23 9:25 ` [Qemu-devel] [PATCH v6 12/35] target/riscv: Convert RV32F " Bastian Koppelmann
2019-01-23 9:25 ` [Qemu-devel] [PATCH v6 13/35] target/riscv: Convert RV64F " Bastian Koppelmann
2019-01-23 9:25 ` [Qemu-devel] [PATCH v6 14/35] target/riscv: Convert RV32D " Bastian Koppelmann
2019-01-23 9:25 ` [Qemu-devel] [PATCH v6 15/35] target/riscv: Convert RV64D " Bastian Koppelmann
2019-01-23 9:25 ` [Qemu-devel] [PATCH v6 16/35] target/riscv: Convert RV priv " Bastian Koppelmann
2019-01-23 9:25 ` [Qemu-devel] [PATCH v6 17/35] target/riscv: Convert quadrant 0 of RVXC " Bastian Koppelmann
2019-01-23 9:25 ` [Qemu-devel] [PATCH v6 18/35] target/riscv: Convert quadrant 1 " Bastian Koppelmann
2019-01-23 9:25 ` [Qemu-devel] [PATCH v6 19/35] target/riscv: Convert quadrant 2 " Bastian Koppelmann
2019-01-23 9:25 ` [Qemu-devel] [PATCH v6 20/35] target/riscv: Remove gen_jalr() Bastian Koppelmann
2019-01-23 9:25 ` [Qemu-devel] [PATCH v6 21/35] target/riscv: Remove manual decoding from gen_branch() Bastian Koppelmann
2019-01-25 22:23 ` Alistair
2019-01-23 9:25 ` [Qemu-devel] [PATCH v6 22/35] target/riscv: Remove manual decoding from gen_load() Bastian Koppelmann
2019-01-25 22:23 ` Alistair
2019-01-23 9:25 ` [Qemu-devel] [PATCH v6 23/35] target/riscv: Remove manual decoding from gen_store() Bastian Koppelmann
2019-01-25 22:25 ` Alistair
2019-01-23 9:25 ` [Qemu-devel] [PATCH v6 24/35] target/riscv: Move gen_arith_imm() decoding into trans_* functions Bastian Koppelmann
2019-01-25 22:27 ` Alistair
2019-01-23 9:25 ` [Qemu-devel] [PATCH v6 25/35] target/riscv: make ADD/SUB/OR/XOR/AND insn use arg lists Bastian Koppelmann
2019-01-23 9:25 ` [Qemu-devel] [PATCH v6 26/35] target/riscv: Remove shift and slt insn manual decoding Bastian Koppelmann
2019-01-23 9:25 ` [Qemu-devel] [PATCH v6 27/35] target/riscv: Remove manual decoding of RV32/64M insn Bastian Koppelmann
2019-01-23 9:25 ` [Qemu-devel] [PATCH v6 28/35] target/riscv: Rename trans_arith to gen_arith Bastian Koppelmann
2019-01-25 22:28 ` Alistair
2019-01-23 9:25 ` [Qemu-devel] [PATCH v6 29/35] target/riscv: Remove gen_system() Bastian Koppelmann
2019-01-23 9:25 ` [Qemu-devel] [PATCH v6 30/35] target/riscv: Remove decode_RV32_64G() Bastian Koppelmann
2019-01-25 22:29 ` Alistair
2019-01-23 9:25 ` [Qemu-devel] [PATCH v6 31/35] target/riscv: Convert @cs_2 insns to share translation functions Bastian Koppelmann
2019-01-23 9:25 ` [Qemu-devel] [PATCH v6 32/35] target/riscv: Convert @cl_d, @cl_w, @cs_d, @cs_w insns Bastian Koppelmann
2019-01-23 9:25 ` [Qemu-devel] [PATCH v6 33/35] target/riscv: Splice fsw_sd and flw_ld for riscv32 vs riscv64 Bastian Koppelmann
2019-01-23 9:25 ` [Qemu-devel] [PATCH v6 34/35] target/riscv: Splice remaining compressed insn pairs " Bastian Koppelmann
2019-01-23 9:25 ` [Qemu-devel] [PATCH v6 35/35] target/riscv: Remaining rvc insn reuse 32 bit translators Bastian Koppelmann
2019-01-31 17:50 ` [Qemu-devel] [PATCH v6 00/35] target/riscv: Convert to decodetree no-reply
2019-01-31 18:18 ` no-reply
2019-01-31 18:22 ` no-reply
2019-02-12 23:21 ` Palmer Dabbelt
2019-02-13 2:15 ` Palmer Dabbelt
2019-02-13 9:06 ` Bastian Koppelmann
2019-02-13 15:34 ` Palmer Dabbelt
2019-02-14 0:37 ` Palmer Dabbelt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190123092538.8004-6-kbastian@mail.uni-paderborn.de \
--to=kbastian@mail.uni-paderborn.de \
--cc=alistair.francis@wdc.com \
--cc=palmer@sifive.com \
--cc=peer.adelt@hni.uni-paderborn.de \
--cc=qemu-devel@nongnu.org \
--cc=qemu-riscv@nongnu.org \
--cc=richard.henderson@linaro.org \
--cc=sagark@eecs.berkeley.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).