From: Yang Zhong <yang.zhong@intel.com>
To: Paolo Bonzini <pbonzini@redhat.com>
Cc: qemu-devel@nongnu.org, thuth@redhat.com, yang.zhong@intel.com
Subject: Re: [Qemu-devel] [RFC PATCH v5 00/52] Support Kconfig in QEMU
Date: Fri, 25 Jan 2019 19:07:08 +0800 [thread overview]
Message-ID: <20190125110708.GB26929@yangzhon-Virtual> (raw)
In-Reply-To: <1548410831-19553-1-git-send-email-pbonzini@redhat.com>
On Fri, Jan 25, 2019 at 11:06:19AM +0100, Paolo Bonzini wrote:
> (I'm only momentarily at the helm and will give control back to Yang after
> this iteration.)
>
> This is still RFC mostly because of the lack of documentation, and because
> only x86 is fully converted, but it's converging. Other targets still
> enable embedded devices in default-configs/ instead of using "select"
> directives. For many targets, the conversion will be trivial because
> they only support one board. The complex ones are ARM, MIPS and PPC
> of course. s390 as usual is just different in some respects, but all
> of its issues are sorted out already in this series and so it's just
> yet another single-board target.
>
> It supports defconfig (default-configs file chooses boards only)
> and allnoconfig (default-configs file chooses devices too) and builds
> all targets. I haven't yet checked that the configuration is the same
> before and after the conversion, but at least device-introspection-test
> and other qtests all pass, which did catch some errors.
>
> As mentioned in the previous versions, this is only a replacement
> for default-configs, in order to simplify configuration and remove
> the need to track dependencies between configuration symbols. In
> fact, even with the current incomplete conversion the diffstat
> for default-configs is already
>
> 31 files changed, 108 insertions(+), 241 deletions(-)
>
> Devices can be disabled by adding for example
>
> CONFIG_HPET=n
>
> to default-configs/i386-softmmu.mak. If you prefer they can be
> listed manually and "make allnoconfig" can be executed before
> building. This probably should become a configure option
> "--without-default-devices" instead.
>
> For the previous discussions on the Kconfig design, see
> http://lists.nongnu.org/archive/html/qemu-devel/2018-09/msg02827.html
>
> Patches 1-27 should probably be committed now, so please review! Yang,
> once they are reviewed you can extract them and post them to the
> mailing list as non-RFC!
Thanks Paolo, you helped me address comments in v4 and i will do it.
Yang
> As to the rest, you're welcome to try them, post conversions for the
> simple targets, suggest usability improvements, and whatever. Thanks to
> everyone for the work on the previous iterations. It's great to see
> the work on this GSoC project come back to life after five years!
>
> v4->v5: new patches 1, 2, 3, 13, 26, 27, 47, 49, 50, 52
> Removed CONFIG_TYPHOON (patch 20)
> Removed CONFIG_DINO (patch 22)
> ported minikconf to python 3
> improved some minikconf error messages
> added missing symbols in patch 32
> added CONFIG_VHOST_USER and CONFIG_LINUX, made CONFIG_KVM per target (patch 33)
> removed $(...) assignments from default-configs/ (patch 33)
> moved allnoconfig patch earlier, removed allyesconfig/randconfig
> add CONFIG_PCI_EXPRESS to non-x86 targets (patch 36)
> added CONFIG_PCI_DEVICES in patch 37 to support s390x
> virtio-mmio does not support vhost-user yet (patches 40 and 48)
> fix PCSPK for platforms that lack an i8254 (patch 41)
> add "select ISA_BUS" to I82378 and SUN4U (patch 41)
> changed QXL/VTD/AMD_IOMMU from "select" to "default y if ..." (patch 42)
> moved "select PAM" and "select ISA_BUS" from board to device (patch 42)
> brought patch 44 up to date
> fixed MILKYMIST_TMU2 to only apply to MILKYMIST (patch 45)
> new config symbol VIRTIO_INPUT_HOST
> fixed select/depends for virtio (patch 48)
> moved some ACPI dependencies from board to devices (patch 51)
>
> Paolo Bonzini (27):
> arm: disable CONFIG_SERIAL_ISA
> ide: split ioport registration to a separate file
> vfio: move conditional up to hw/Makefile.objs
> build: actually use CONFIG_PAM
> hw/i386/Makefile.objs: Build pc_piix* and pc_q35 boards
> hw/s390/Makefile.objs: Create new CONFIG_* variables for s390x boards and devices
> hw/i2c/Makefile.objs: Create new CONFIG_* variables for EEPROM and ACPI controller
> hw/vfio/Makefile.objs: Create new CONFIG_* variables for VFIO core and PCI
> minikconfig: add parser skeleton
> minikconfig: add AST
> minikconfig: add semantic analysis
> kconfig: introduce kconfig files
> build: switch to Kconfig
> minikconf: implement allnoconfig and defconfig
> ide: express dependencies with Kconfig
> build: convert pci.mak to Kconfig
> build: convert sound.mak to Kconfig
> build: convert usb.mak to Kconfig
> scsi: express dependencies with Kconfig
> isa: express dependencies with kconfig
> i386: express dependencies with Kconfig
> i2c: express dependencies with Kconfig
> ptimer: express dependencies with Kconfig
> vfio: express vfio dependencies with Kconfig
> tpm: express dependencies with Kconfig
> isa: express SuperIO dependencies with Kconfig
> kconfig: introduce CONFIG_TEST_DEVICES
>
> Yang Zhong (17):
> hw/pci-host/Makefile.objs: make CONFIGS clear for PCI EXPRESS
> hw/arm/Makefile.objs: CONFIG_VIRT created for virt board
> hw/nios2/Makefile.objs: Conditionally build nios2
> hw/riscv/Makefile.objs: Create CONFIG_* for riscv boards
> hw/sparc64/Makefile.objs: Create CONFIG_* for sparc64
> hw/alpha/Makefile.objs: Create CONFIG_* for alpha
> hw/cris/Makefile.objs: Create CONFIG_* for cris
> hw/hppa/Makefile.objs: Create CONFIG_* for hppa
> hw/moxie/Makefile.objs: Conditionally build moxie
> hw/openrisc/Makefile.objs: Create CONFIG_* for openrisc
> hw/tricore/Makefile.objs: Create CONFIG_* for tricore
> hw/display: make edid configurable
> hw/pci/Makefile.objs: make pcie configurable
> display: express dependencies with kconfig
> hyperv: express dependencies with kconfig
> virtio: express virtio dependencies with Kconfig
> i386-softmmu.mak: remove all CONFIG_* except boards definitions
>
> Ákos Kovács (8):
> hw/m68k/Makefile.objs: Conditionally build boards
> hw/microblaze/Makefile.objs: Create configs for petalogix and xilinx
> boards
> hw/mips/Makefile.objs: Create CONFIG_* for r4k, malta, mipssim boards
> hw/ppc/Makefile.objs: Build all boards conditinally with CONFIG_*
> hw/sh4/Makefile.objs: New CONFIG_* varibales created for sh4 boards
> and device
> hw/sparc/Makefile.objs: CONFIG_* for sun4m and leon3 created
> hw/lm32/Makefile.objs: Conditionally build lm32 and milkmyst
> hw/xtensa/Makefile.objs: Build xtensa_sim and xtensa_fpga
> conditionally
>
> Kconfig.host | 24 ++
> Makefile | 27 +-
> Makefile.target | 7 +-
> configure | 3 +
> default-configs/alpha-softmmu.mak | 14 +-
> default-configs/arm-softmmu.mak | 16 +-
> default-configs/cris-softmmu.mak | 2 +-
> default-configs/hppa-softmmu.mak | 6 +-
> default-configs/hyperv.mak | 2 -
> default-configs/i386-softmmu.mak | 77 +---
> default-configs/lm32-softmmu.mak | 2 -
> default-configs/m68k-softmmu.mak | 3 +-
> default-configs/microblaze-softmmu.mak | 4 +-
> default-configs/mips-softmmu-common.mak | 13 +-
> default-configs/mips64el-softmmu.mak | 3 +-
> default-configs/moxie-softmmu.mak | 1 +
> default-configs/nios2-softmmu.mak | 2 +-
> default-configs/or1k-softmmu.mak | 1 +
> default-configs/pci.mak | 49 ---
> default-configs/ppc-softmmu.mak | 28 +-
> default-configs/ppc64-softmmu.mak | 5 -
> default-configs/riscv32-softmmu.mak | 15 +-
> default-configs/riscv64-softmmu.mak | 15 +-
> default-configs/s390x-softmmu.mak | 9 +-
> default-configs/sh4-softmmu.mak | 17 +-
> default-configs/sh4eb-softmmu.mak | 15 +-
> default-configs/sound.mak | 4 -
> default-configs/sparc-softmmu.mak | 3 +-
> default-configs/sparc64-softmmu.mak | 9 +-
> default-configs/tricore-softmmu.mak | 1 +
> default-configs/unicore32-softmmu.mak | 1 -
> default-configs/usb.mak | 11 -
> default-configs/virtio.mak | 15 -
> default-configs/xtensa-softmmu.mak | 3 +
> default-configs/xtensaeb-softmmu.mak | 3 +
> docs/devel/build-system.txt | 1 -
> hw/9pfs/Kconfig | 6 +
> hw/Kconfig | 73 ++++
> hw/Makefile.objs | 4 +-
> hw/acpi/Kconfig | 29 ++
> hw/adc/Kconfig | 2 +
> hw/alpha/Kconfig | 2 +
> hw/alpha/Makefile.objs | 2 +-
> hw/arm/Kconfig | 117 ++++++
> hw/arm/Makefile.objs | 3 +-
> hw/audio/Kconfig | 52 +++
> hw/block/Kconfig | 38 ++
> hw/bt/Kconfig | 2 +
> hw/char/Kconfig | 42 ++
> hw/core/Kconfig | 11 +
> hw/cpu/Kconfig | 8 +
> hw/cris/Kconfig | 6 +
> hw/cris/Makefile.objs | 2 +-
> hw/display/Kconfig | 107 +++++
> hw/display/Makefile.objs | 4 +-
> hw/dma/Kconfig | 21 +
> hw/gpio/Kconfig | 9 +
> hw/hppa/Kconfig | 5 +
> hw/hppa/Makefile.objs | 2 +-
> hw/hyperv/Kconfig | 9 +
> hw/i2c/Kconfig | 27 ++
> hw/i2c/Makefile.objs | 7 +-
> hw/i386/Kconfig | 88 ++++
> hw/i386/Makefile.objs | 4 +-
> hw/ide/Kconfig | 54 +++
> hw/ide/Makefile.objs | 6 +-
> hw/ide/core.c | 25 --
> hw/ide/ioport.c | 67 ++++
> hw/input/Kconfig | 33 ++
> hw/intc/Kconfig | 59 +++
> hw/ipack/Kconfig | 4 +
> hw/ipmi/Kconfig | 22 +
> hw/isa/Kconfig | 53 +++
> hw/lm32/Kconfig | 7 +
> hw/lm32/Makefile.objs | 4 +-
> hw/m68k/Kconfig | 10 +
> hw/m68k/Makefile.objs | 4 +-
> hw/mem/Kconfig | 10 +
> hw/microblaze/Kconfig | 8 +
> hw/microblaze/Makefile.objs | 6 +-
> hw/mips/Kconfig | 21 +
> hw/mips/Makefile.objs | 5 +-
> hw/misc/Kconfig | 112 ++++++
> hw/misc/macio/Kconfig | 11 +
> hw/moxie/Kconfig | 2 +
> hw/moxie/Makefile.objs | 2 +-
> hw/net/Kconfig | 122 ++++++
> hw/net/Makefile.objs | 4 +-
> hw/nios2/Kconfig | 5 +
> hw/nios2/Makefile.objs | 3 +-
> hw/nvram/Kconfig | 8 +
> hw/openrisc/Kconfig | 2 +
> hw/openrisc/Makefile.objs | 2 +-
> hw/pci-bridge/Kconfig | 29 ++
> hw/pci-host/Kconfig | 49 +++
> hw/pci-host/Makefile.objs | 10 +-
> hw/pci/Kconfig | 9 +
> hw/pci/Makefile.objs | 9 +-
> hw/pcmcia/Kconfig | 2 +
> hw/ppc/Kconfig | 60 +++
> hw/ppc/Makefile.objs | 11 +-
> hw/riscv/Kconfig | 19 +
> hw/riscv/Makefile.objs | 22 +-
> hw/s390x/Kconfig | 2 +
> hw/s390x/Makefile.objs | 2 +
> hw/scsi/Kconfig | 54 +++
> hw/scsi/Makefile.objs | 2 +-
> hw/sd/Kconfig | 14 +
> hw/sh4/Kconfig | 12 +
> hw/sh4/Makefile.objs | 4 +-
> hw/smbios/Kconfig | 2 +
> hw/sparc/Kconfig | 13 +
> hw/sparc/Makefile.objs | 4 +-
> hw/sparc64/Kconfig | 6 +
> hw/sparc64/Makefile.objs | 6 +-
> hw/ssi/Kconfig | 14 +
> hw/timer/Kconfig | 63 +++
> hw/tpm/Kconfig | 27 ++
> hw/tricore/Kconfig | 2 +
> hw/tricore/Makefile.objs | 2 +-
> hw/unicore32/Kconfig | 3 +
> hw/usb/Kconfig | 91 +++++
> hw/vfio/Kconfig | 36 ++
> hw/vfio/Makefile.objs | 9 +-
> hw/virtio/Kconfig | 27 ++
> hw/watchdog/Kconfig | 16 +
> hw/xtensa/Kconfig | 5 +
> hw/xtensa/Makefile.objs | 4 +-
> rules.mak | 2 +-
> scripts/make_device_config.sh | 30 --
> scripts/minikconf.py | 687 ++++++++++++++++++++++++++++++++
> 131 files changed, 2749 insertions(+), 374 deletions(-)
> create mode 100644 Kconfig.host
> delete mode 100644 default-configs/hyperv.mak
> delete mode 100644 default-configs/pci.mak
> delete mode 100644 default-configs/sound.mak
> delete mode 100644 default-configs/usb.mak
> delete mode 100644 default-configs/virtio.mak
> create mode 100644 hw/9pfs/Kconfig
> create mode 100644 hw/Kconfig
> create mode 100644 hw/acpi/Kconfig
> create mode 100644 hw/adc/Kconfig
> create mode 100644 hw/alpha/Kconfig
> create mode 100644 hw/arm/Kconfig
> create mode 100644 hw/audio/Kconfig
> create mode 100644 hw/block/Kconfig
> create mode 100644 hw/bt/Kconfig
> create mode 100644 hw/char/Kconfig
> create mode 100644 hw/core/Kconfig
> create mode 100644 hw/cpu/Kconfig
> create mode 100644 hw/cris/Kconfig
> create mode 100644 hw/display/Kconfig
> create mode 100644 hw/dma/Kconfig
> create mode 100644 hw/gpio/Kconfig
> create mode 100644 hw/hppa/Kconfig
> create mode 100644 hw/hyperv/Kconfig
> create mode 100644 hw/i2c/Kconfig
> create mode 100644 hw/i386/Kconfig
> create mode 100644 hw/ide/Kconfig
> create mode 100644 hw/ide/ioport.c
> create mode 100644 hw/input/Kconfig
> create mode 100644 hw/intc/Kconfig
> create mode 100644 hw/ipack/Kconfig
> create mode 100644 hw/ipmi/Kconfig
> create mode 100644 hw/isa/Kconfig
> create mode 100644 hw/lm32/Kconfig
> create mode 100644 hw/m68k/Kconfig
> create mode 100644 hw/mem/Kconfig
> create mode 100644 hw/microblaze/Kconfig
> create mode 100644 hw/mips/Kconfig
> create mode 100644 hw/misc/Kconfig
> create mode 100644 hw/misc/macio/Kconfig
> create mode 100644 hw/moxie/Kconfig
> create mode 100644 hw/net/Kconfig
> create mode 100644 hw/nios2/Kconfig
> create mode 100644 hw/nvram/Kconfig
> create mode 100644 hw/openrisc/Kconfig
> create mode 100644 hw/pci-bridge/Kconfig
> create mode 100644 hw/pci-host/Kconfig
> create mode 100644 hw/pci/Kconfig
> create mode 100644 hw/pcmcia/Kconfig
> create mode 100644 hw/ppc/Kconfig
> create mode 100644 hw/riscv/Kconfig
> create mode 100644 hw/s390x/Kconfig
> create mode 100644 hw/scsi/Kconfig
> create mode 100644 hw/sd/Kconfig
> create mode 100644 hw/sh4/Kconfig
> create mode 100644 hw/smbios/Kconfig
> create mode 100644 hw/sparc/Kconfig
> create mode 100644 hw/sparc64/Kconfig
> create mode 100644 hw/ssi/Kconfig
> create mode 100644 hw/timer/Kconfig
> create mode 100644 hw/tpm/Kconfig
> create mode 100644 hw/tricore/Kconfig
> create mode 100644 hw/unicore32/Kconfig
> create mode 100644 hw/usb/Kconfig
> create mode 100644 hw/vfio/Kconfig
> create mode 100644 hw/virtio/Kconfig
> create mode 100644 hw/watchdog/Kconfig
> create mode 100644 hw/xtensa/Kconfig
> delete mode 100644 scripts/make_device_config.sh
> create mode 100644 scripts/minikconf.py
>
> --
> 1.8.3.1
next prev parent reply other threads:[~2019-01-25 11:11 UTC|newest]
Thread overview: 119+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-25 10:06 [Qemu-devel] [RFC PATCH v5 00/52] Support Kconfig in QEMU Paolo Bonzini
2019-01-25 10:06 ` [Qemu-devel] [PATCH 01/52] arm: disable CONFIG_SERIAL_ISA Paolo Bonzini
2019-01-25 14:49 ` Thomas Huth
2019-01-25 15:21 ` Paolo Bonzini
2019-01-25 10:06 ` [Qemu-devel] [PATCH 02/52] ide: split ioport registration to a separate file Paolo Bonzini
2019-01-25 14:53 ` Thomas Huth
2019-01-25 15:22 ` Paolo Bonzini
2019-01-30 12:07 ` Thomas Huth
2019-01-30 12:20 ` Paolo Bonzini
2019-01-30 12:55 ` Yang Zhong
2019-01-30 15:55 ` BALATON Zoltan
2019-01-25 10:06 ` [Qemu-devel] [PATCH 03/52] vfio: move conditional up to hw/Makefile.objs Paolo Bonzini
2019-01-25 15:04 ` Thomas Huth
2019-01-25 10:06 ` [Qemu-devel] [PATCH 04/52] hw/pci-host/Makefile.objs: make CONFIGS clear for PCI EXPRESS Paolo Bonzini
2019-01-25 10:06 ` [Qemu-devel] [PATCH 05/52] build: actually use CONFIG_PAM Paolo Bonzini
2019-01-31 21:50 ` Philippe Mathieu-Daudé
2019-01-25 10:06 ` [Qemu-devel] [PATCH 06/52] hw/i386/Makefile.objs: Build pc_piix* and pc_q35 boards Paolo Bonzini
2019-01-25 10:06 ` [Qemu-devel] [PATCH 07/52] hw/arm/Makefile.objs: CONFIG_VIRT created for virt board Paolo Bonzini
2019-01-25 15:06 ` Thomas Huth
2019-01-25 15:23 ` Paolo Bonzini
2019-01-25 10:06 ` [Qemu-devel] [PATCH 08/52] hw/m68k/Makefile.objs: Conditionally build boards Paolo Bonzini
2019-01-25 15:08 ` Thomas Huth
2019-01-25 10:06 ` [Qemu-devel] [PATCH 09/52] hw/microblaze/Makefile.objs: Create configs for petalogix and xilinx boards Paolo Bonzini
2019-01-25 10:06 ` [Qemu-devel] [PATCH 10/52] hw/mips/Makefile.objs: Create CONFIG_* for r4k, malta, mipssim boards Paolo Bonzini
2019-01-31 21:50 ` Philippe Mathieu-Daudé
2019-01-25 10:06 ` [Qemu-devel] [PATCH 11/52] hw/ppc/Makefile.objs: Build all boards conditinally with CONFIG_* Paolo Bonzini
2019-01-25 10:06 ` [Qemu-devel] [PATCH 12/52] hw/sh4/Makefile.objs: New CONFIG_* varibales created for sh4 boards and device Paolo Bonzini
2019-01-25 10:06 ` [Qemu-devel] [PATCH 13/52] hw/s390/Makefile.objs: Create new CONFIG_* variables for s390x boards and devices Paolo Bonzini
2019-01-25 15:17 ` Thomas Huth
2019-01-25 15:23 ` Paolo Bonzini
2019-01-25 10:06 ` [Qemu-devel] [PATCH 14/52] hw/sparc/Makefile.objs: CONFIG_* for sun4m and leon3 created Paolo Bonzini
2019-01-25 10:06 ` [Qemu-devel] [PATCH 15/52] hw/lm32/Makefile.objs: Conditionally build lm32 and milkmyst Paolo Bonzini
2019-01-25 10:06 ` [Qemu-devel] [PATCH 16/52] hw/xtensa/Makefile.objs: Build xtensa_sim and xtensa_fpga conditionally Paolo Bonzini
2019-01-25 10:06 ` [Qemu-devel] [PATCH 17/52] hw/nios2/Makefile.objs: Conditionally build nios2 Paolo Bonzini
2019-01-25 10:06 ` [Qemu-devel] [PATCH 18/52] hw/riscv/Makefile.objs: Create CONFIG_* for riscv boards Paolo Bonzini
2019-01-25 10:06 ` [Qemu-devel] [PATCH 19/52] hw/sparc64/Makefile.objs: Create CONFIG_* for sparc64 Paolo Bonzini
2019-01-25 10:06 ` [Qemu-devel] [PATCH 20/52] hw/alpha/Makefile.objs: Create CONFIG_* for alpha Paolo Bonzini
2019-01-25 15:29 ` Thomas Huth
2019-01-25 20:04 ` Richard Henderson
2019-01-25 10:06 ` [Qemu-devel] [PATCH 21/52] hw/cris/Makefile.objs: Create CONFIG_* for cris Paolo Bonzini
2019-01-25 10:06 ` [Qemu-devel] [PATCH 22/52] hw/hppa/Makefile.objs: Create CONFIG_* for hppa Paolo Bonzini
2019-01-25 20:05 ` Richard Henderson
2019-01-25 10:06 ` [Qemu-devel] [PATCH 23/52] hw/moxie/Makefile.objs: Conditionally build moxie Paolo Bonzini
2019-01-25 15:33 ` Thomas Huth
2019-01-25 10:06 ` [Qemu-devel] [PATCH 24/52] hw/openrisc/Makefile.objs: Create CONFIG_* for openrisc Paolo Bonzini
2019-01-25 15:35 ` Thomas Huth
2019-01-25 17:33 ` Paolo Bonzini
2019-01-25 10:06 ` [Qemu-devel] [PATCH 25/52] hw/tricore/Makefile.objs: Create CONFIG_* for tricore Paolo Bonzini
2019-01-25 10:06 ` [Qemu-devel] [PATCH 26/52] hw/i2c/Makefile.objs: Create new CONFIG_* variables for EEPROM and ACPI controller Paolo Bonzini
2019-01-25 15:42 ` Thomas Huth
2019-01-25 10:06 ` [Qemu-devel] [PATCH 27/52] hw/vfio/Makefile.objs: Create new CONFIG_* variables for VFIO core and PCI Paolo Bonzini
2019-01-25 10:06 ` [Qemu-devel] [PATCH 28/52] minikconfig: add parser skeleton Paolo Bonzini
2019-01-25 10:06 ` [Qemu-devel] [PATCH 29/52] minikconfig: add AST Paolo Bonzini
2019-01-25 10:06 ` [Qemu-devel] [PATCH 30/52] minikconfig: add semantic analysis Paolo Bonzini
2019-01-25 10:06 ` [Qemu-devel] [PATCH 31/52] hw/display: make edid configurable Paolo Bonzini
2019-01-31 21:53 ` Philippe Mathieu-Daudé
2019-01-25 10:06 ` [Qemu-devel] [PATCH 32/52] kconfig: introduce kconfig files Paolo Bonzini
2019-01-31 13:21 ` Thomas Huth
2019-01-31 13:37 ` Paolo Bonzini
2019-01-25 10:06 ` [Qemu-devel] [PATCH 33/52] build: switch to Kconfig Paolo Bonzini
2019-01-31 21:48 ` Philippe Mathieu-Daudé
2019-01-31 22:15 ` Paolo Bonzini
2019-02-01 14:56 ` Philippe Mathieu-Daudé
2019-02-01 21:24 ` Paolo Bonzini
2019-02-04 12:58 ` Paolo Bonzini
2019-02-04 15:45 ` Anthony PERARD
2019-02-04 19:04 ` Paolo Bonzini
2019-01-25 10:06 ` [Qemu-devel] [PATCH 34/52] minikconf: implement allnoconfig and defconfig Paolo Bonzini
2019-01-25 10:06 ` [Qemu-devel] [PATCH 35/52] ide: express dependencies with Kconfig Paolo Bonzini
2019-01-25 10:06 ` [Qemu-devel] [PATCH 36/52] hw/pci/Makefile.objs: make pcie configurable Paolo Bonzini
2019-01-25 10:06 ` [Qemu-devel] [PATCH 37/52] build: convert pci.mak to Kconfig Paolo Bonzini
2019-01-25 10:06 ` [Qemu-devel] [PATCH 38/52] build: convert sound.mak " Paolo Bonzini
2019-01-25 10:06 ` [Qemu-devel] [PATCH 39/52] build: convert usb.mak " Paolo Bonzini
2019-01-25 10:06 ` [Qemu-devel] [PATCH 40/52] scsi: express dependencies with Kconfig Paolo Bonzini
2019-01-31 21:23 ` Philippe Mathieu-Daudé
2019-01-31 22:11 ` Paolo Bonzini
2019-01-25 10:07 ` [Qemu-devel] [PATCH 41/52] isa: express dependencies with kconfig Paolo Bonzini
2019-01-30 10:53 ` Thomas Huth
2019-01-30 11:13 ` Paolo Bonzini
2019-01-30 11:32 ` Thomas Huth
2019-01-30 11:43 ` Paolo Bonzini
2019-01-30 11:58 ` Thomas Huth
2019-01-30 12:00 ` Yang Zhong
2019-01-31 21:22 ` Philippe Mathieu-Daudé
2019-01-31 22:14 ` Paolo Bonzini
2019-01-31 22:24 ` Philippe Mathieu-Daudé
2019-02-14 16:46 ` Paolo Bonzini
2019-01-25 10:07 ` [Qemu-devel] [PATCH 42/52] i386: express dependencies with Kconfig Paolo Bonzini
2019-01-28 14:21 ` Thomas Huth
2019-02-01 15:05 ` Philippe Mathieu-Daudé
2019-02-01 20:58 ` Paolo Bonzini
2019-02-14 16:47 ` Paolo Bonzini
2019-02-14 16:54 ` Michael S. Tsirkin
2019-02-14 17:02 ` Paolo Bonzini
2019-01-25 10:07 ` [Qemu-devel] [PATCH 43/52] i2c: " Paolo Bonzini
2019-01-31 22:10 ` Philippe Mathieu-Daudé
2019-01-31 22:21 ` Paolo Bonzini
2019-01-25 10:07 ` [Qemu-devel] [PATCH 44/52] ptimer: " Paolo Bonzini
2019-01-25 10:07 ` [Qemu-devel] [PATCH 45/52] display: express dependencies with kconfig Paolo Bonzini
2019-01-25 10:07 ` [Qemu-devel] [PATCH 46/52] hyperv: " Paolo Bonzini
2019-01-25 10:07 ` [Qemu-devel] [PATCH 47/52] vfio: express vfio dependencies with Kconfig Paolo Bonzini
2019-01-25 20:00 ` Alex Williamson
2019-01-28 10:54 ` Paolo Bonzini
2019-01-25 10:07 ` [Qemu-devel] [PATCH 48/52] virtio: express virtio " Paolo Bonzini
2019-01-25 10:07 ` [Qemu-devel] [PATCH 49/52] tpm: express " Paolo Bonzini
2019-01-25 10:07 ` [Qemu-devel] [PATCH 50/52] isa: express SuperIO " Paolo Bonzini
2019-01-31 21:26 ` Philippe Mathieu-Daudé
2019-01-25 10:07 ` [Qemu-devel] [PATCH 51/52] i386-softmmu.mak: remove all CONFIG_* except boards definitions Paolo Bonzini
2019-01-25 10:07 ` [Qemu-devel] [PATCH 52/52] kconfig: introduce CONFIG_TEST_DEVICES Paolo Bonzini
2019-01-25 11:07 ` Yang Zhong [this message]
2019-01-31 17:56 ` [Qemu-devel] [RFC PATCH v5 00/52] Support Kconfig in QEMU no-reply
2019-01-31 21:57 ` no-reply
2019-01-31 21:58 ` no-reply
2019-01-31 22:01 ` no-reply
2019-01-31 22:22 ` no-reply
2019-01-31 22:22 ` no-reply
2019-01-31 22:26 ` no-reply
2019-02-01 10:41 ` Philippe Mathieu-Daudé
2019-02-03 12:01 ` no-reply
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190125110708.GB26929@yangzhon-Virtual \
--to=yang.zhong@intel.com \
--cc=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=thuth@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).