From: minyard@acm.org
To: qemu-devel@nongnu.org, "Dr . David Alan Gilbert" <dgilbert@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>,
"Michael S . Tsirkin" <mst@redhat.com>,
Corey Minyard <minyard@acm.org>,
Peter Maydell <peter.maydell@linaro.org>,
Corey Minyard <cminyard@mvista.com>
Subject: [Qemu-devel] [PATCH v4 01/19] i2c: Split smbus into parts
Date: Mon, 28 Jan 2019 11:54:40 -0600 [thread overview]
Message-ID: <20190128175458.27255-2-minyard@acm.org> (raw)
In-Reply-To: <20190128175458.27255-1-minyard@acm.org>
From: Corey Minyard <cminyard@mvista.com>
smbus.c and smbus.h had device side code, master side code, and
smbus.h has some smbus_eeprom.c definitions. Split them into
separate files.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
MAINTAINERS | 12 ++
hw/arm/aspeed.c | 2 +-
hw/i2c/Makefile.objs | 2 +-
hw/i2c/pm_smbus.c | 2 +-
hw/i2c/smbus_eeprom.c | 3 +-
hw/i2c/smbus_ich9.c | 2 -
hw/i2c/smbus_master.c | 165 ++++++++++++++++++++++
hw/i2c/{smbus.c => smbus_slave.c} | 153 +-------------------
hw/i386/pc_piix.c | 2 +-
hw/i386/pc_q35.c | 2 +-
hw/isa/vt82c686.c | 1 -
hw/mips/mips_fulong2e.c | 2 +-
hw/mips/mips_malta.c | 2 +-
hw/ppc/sam460ex.c | 2 +-
include/hw/i2c/pm_smbus.h | 2 +
include/hw/i2c/smbus_eeprom.h | 32 +++++
include/hw/i2c/smbus_master.h | 55 ++++++++
include/hw/i2c/{smbus.h => smbus_slave.h} | 37 +----
18 files changed, 285 insertions(+), 193 deletions(-)
create mode 100644 hw/i2c/smbus_master.c
rename hw/i2c/{smbus.c => smbus_slave.c} (65%)
create mode 100644 include/hw/i2c/smbus_eeprom.h
create mode 100644 include/hw/i2c/smbus_master.h
rename include/hw/i2c/{smbus.h => smbus_slave.h} (65%)
diff --git a/MAINTAINERS b/MAINTAINERS
index 59e1f24d68..aaa80d0b59 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2142,6 +2142,18 @@ M: Viktor Prutyanov <viktor.prutyanov@phystech.edu>
S: Maintained
F: contrib/elf2dmp/
+I2C and SMBus
+M: Corey Minyard <cminyard@mvista.com>
+S: Maintained
+F: hw/i2c/core.c
+F: hw/i2c/smbus_slave.c
+F: hw/i2c/smbus_master.c
+F: hw/i2c/smbus_eeprom.c
+F: include/hw/i2c/i2c.h
+F: include/hw/i2c/smbus_master.h
+F: include/hw/i2c/smbus_slave.h
+F: include/hw/i2c/smbus_eeprom.h
+
Usermode Emulation
------------------
Overall
diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c
index 5158985482..996812498d 100644
--- a/hw/arm/aspeed.c
+++ b/hw/arm/aspeed.c
@@ -18,7 +18,7 @@
#include "hw/arm/aspeed.h"
#include "hw/arm/aspeed_soc.h"
#include "hw/boards.h"
-#include "hw/i2c/smbus.h"
+#include "hw/i2c/smbus_eeprom.h"
#include "qemu/log.h"
#include "sysemu/block-backend.h"
#include "hw/loader.h"
diff --git a/hw/i2c/Makefile.objs b/hw/i2c/Makefile.objs
index 37cacde978..8973edfa22 100644
--- a/hw/i2c/Makefile.objs
+++ b/hw/i2c/Makefile.objs
@@ -1,4 +1,4 @@
-common-obj-$(CONFIG_I2C) += core.o smbus.o smbus_eeprom.o
+common-obj-$(CONFIG_I2C) += core.o smbus_slave.o smbus_master.o smbus_eeprom.o
common-obj-$(CONFIG_DDC) += i2c-ddc.o
common-obj-$(CONFIG_VERSATILE_I2C) += versatile_i2c.o
common-obj-$(CONFIG_ACPI_X86) += smbus_ich9.o
diff --git a/hw/i2c/pm_smbus.c b/hw/i2c/pm_smbus.c
index 03062740cc..6cfb7eb1b3 100644
--- a/hw/i2c/pm_smbus.c
+++ b/hw/i2c/pm_smbus.c
@@ -20,7 +20,7 @@
#include "qemu/osdep.h"
#include "hw/hw.h"
#include "hw/i2c/pm_smbus.h"
-#include "hw/i2c/smbus.h"
+#include "hw/i2c/smbus_master.h"
#define SMBHSTSTS 0x00
#define SMBHSTCNT 0x02
diff --git a/hw/i2c/smbus_eeprom.c b/hw/i2c/smbus_eeprom.c
index f18aa3de35..d82423aa7e 100644
--- a/hw/i2c/smbus_eeprom.c
+++ b/hw/i2c/smbus_eeprom.c
@@ -25,7 +25,8 @@
#include "qemu/osdep.h"
#include "hw/hw.h"
#include "hw/i2c/i2c.h"
-#include "hw/i2c/smbus.h"
+#include "hw/i2c/smbus_slave.h"
+#include "hw/i2c/smbus_eeprom.h"
//#define DEBUG
diff --git a/hw/i2c/smbus_ich9.c b/hw/i2c/smbus_ich9.c
index 2a8b49e02f..e6d8d28194 100644
--- a/hw/i2c/smbus_ich9.c
+++ b/hw/i2c/smbus_ich9.c
@@ -29,8 +29,6 @@
#include "hw/i2c/pm_smbus.h"
#include "hw/pci/pci.h"
#include "sysemu/sysemu.h"
-#include "hw/i2c/i2c.h"
-#include "hw/i2c/smbus.h"
#include "hw/i386/ich9.h"
diff --git a/hw/i2c/smbus_master.c b/hw/i2c/smbus_master.c
new file mode 100644
index 0000000000..0a6223744c
--- /dev/null
+++ b/hw/i2c/smbus_master.c
@@ -0,0 +1,165 @@
+/*
+ * QEMU SMBus host (master) emulation.
+ *
+ * This code emulates SMBus transactions from the master point of view,
+ * it runs the individual I2C transaction to do the SMBus protocol
+ * over I2C.
+ *
+ * Copyright (c) 2007 CodeSourcery.
+ * Written by Paul Brook
+ *
+ * This code is licensed under the LGPL.
+ */
+
+#include "qemu/osdep.h"
+#include "hw/hw.h"
+#include "hw/i2c/i2c.h"
+#include "hw/i2c/smbus_master.h"
+
+/* Master device commands. */
+int smbus_quick_command(I2CBus *bus, uint8_t addr, int read)
+{
+ if (i2c_start_transfer(bus, addr, read)) {
+ return -1;
+ }
+ i2c_end_transfer(bus);
+ return 0;
+}
+
+int smbus_receive_byte(I2CBus *bus, uint8_t addr)
+{
+ uint8_t data;
+
+ if (i2c_start_transfer(bus, addr, 1)) {
+ return -1;
+ }
+ data = i2c_recv(bus);
+ i2c_nack(bus);
+ i2c_end_transfer(bus);
+ return data;
+}
+
+int smbus_send_byte(I2CBus *bus, uint8_t addr, uint8_t data)
+{
+ if (i2c_start_transfer(bus, addr, 0)) {
+ return -1;
+ }
+ i2c_send(bus, data);
+ i2c_end_transfer(bus);
+ return 0;
+}
+
+int smbus_read_byte(I2CBus *bus, uint8_t addr, uint8_t command)
+{
+ uint8_t data;
+ if (i2c_start_transfer(bus, addr, 0)) {
+ return -1;
+ }
+ i2c_send(bus, command);
+ if (i2c_start_transfer(bus, addr, 1)) {
+ i2c_end_transfer(bus);
+ return -1;
+ }
+ data = i2c_recv(bus);
+ i2c_nack(bus);
+ i2c_end_transfer(bus);
+ return data;
+}
+
+int smbus_write_byte(I2CBus *bus, uint8_t addr, uint8_t command, uint8_t data)
+{
+ if (i2c_start_transfer(bus, addr, 0)) {
+ return -1;
+ }
+ i2c_send(bus, command);
+ i2c_send(bus, data);
+ i2c_end_transfer(bus);
+ return 0;
+}
+
+int smbus_read_word(I2CBus *bus, uint8_t addr, uint8_t command)
+{
+ uint16_t data;
+ if (i2c_start_transfer(bus, addr, 0)) {
+ return -1;
+ }
+ i2c_send(bus, command);
+ if (i2c_start_transfer(bus, addr, 1)) {
+ i2c_end_transfer(bus);
+ return -1;
+ }
+ data = i2c_recv(bus);
+ data |= i2c_recv(bus) << 8;
+ i2c_nack(bus);
+ i2c_end_transfer(bus);
+ return data;
+}
+
+int smbus_write_word(I2CBus *bus, uint8_t addr, uint8_t command, uint16_t data)
+{
+ if (i2c_start_transfer(bus, addr, 0)) {
+ return -1;
+ }
+ i2c_send(bus, command);
+ i2c_send(bus, data & 0xff);
+ i2c_send(bus, data >> 8);
+ i2c_end_transfer(bus);
+ return 0;
+}
+
+int smbus_read_block(I2CBus *bus, uint8_t addr, uint8_t command, uint8_t *data,
+ int len, bool recv_len, bool send_cmd)
+{
+ int rlen;
+ int i;
+
+ if (send_cmd) {
+ if (i2c_start_transfer(bus, addr, 0)) {
+ return -1;
+ }
+ i2c_send(bus, command);
+ }
+ if (i2c_start_transfer(bus, addr, 1)) {
+ if (send_cmd) {
+ i2c_end_transfer(bus);
+ }
+ return -1;
+ }
+ if (recv_len) {
+ rlen = i2c_recv(bus);
+ } else {
+ rlen = len;
+ }
+ if (rlen > len) {
+ rlen = 0;
+ }
+ for (i = 0; i < rlen; i++) {
+ data[i] = i2c_recv(bus);
+ }
+ i2c_nack(bus);
+ i2c_end_transfer(bus);
+ return rlen;
+}
+
+int smbus_write_block(I2CBus *bus, uint8_t addr, uint8_t command, uint8_t *data,
+ int len, bool send_len)
+{
+ int i;
+
+ if (len > 32) {
+ len = 32;
+ }
+
+ if (i2c_start_transfer(bus, addr, 0)) {
+ return -1;
+ }
+ i2c_send(bus, command);
+ if (send_len) {
+ i2c_send(bus, len);
+ }
+ for (i = 0; i < len; i++) {
+ i2c_send(bus, data[i]);
+ }
+ i2c_end_transfer(bus);
+ return 0;
+}
diff --git a/hw/i2c/smbus.c b/hw/i2c/smbus_slave.c
similarity index 65%
rename from hw/i2c/smbus.c
rename to hw/i2c/smbus_slave.c
index 30028bfcc2..463fafe3c5 100644
--- a/hw/i2c/smbus.c
+++ b/hw/i2c/smbus_slave.c
@@ -1,6 +1,10 @@
/*
* QEMU SMBus device emulation.
*
+ * This code is a helper for SMBus device emulation. It implements an
+ * I2C device inteface and runs the SMBus protocol from the device
+ * point of view and maps those to simple calls to emulate.
+ *
* Copyright (c) 2007 CodeSourcery.
* Written by Paul Brook
*
@@ -12,7 +16,7 @@
#include "qemu/osdep.h"
#include "hw/hw.h"
#include "hw/i2c/i2c.h"
-#include "hw/i2c/smbus.h"
+#include "hw/i2c/smbus_slave.h"
//#define DEBUG_SMBUS 1
@@ -206,153 +210,6 @@ static int smbus_i2c_send(I2CSlave *s, uint8_t data)
return 0;
}
-/* Master device commands. */
-int smbus_quick_command(I2CBus *bus, uint8_t addr, int read)
-{
- if (i2c_start_transfer(bus, addr, read)) {
- return -1;
- }
- i2c_end_transfer(bus);
- return 0;
-}
-
-int smbus_receive_byte(I2CBus *bus, uint8_t addr)
-{
- uint8_t data;
-
- if (i2c_start_transfer(bus, addr, 1)) {
- return -1;
- }
- data = i2c_recv(bus);
- i2c_nack(bus);
- i2c_end_transfer(bus);
- return data;
-}
-
-int smbus_send_byte(I2CBus *bus, uint8_t addr, uint8_t data)
-{
- if (i2c_start_transfer(bus, addr, 0)) {
- return -1;
- }
- i2c_send(bus, data);
- i2c_end_transfer(bus);
- return 0;
-}
-
-int smbus_read_byte(I2CBus *bus, uint8_t addr, uint8_t command)
-{
- uint8_t data;
- if (i2c_start_transfer(bus, addr, 0)) {
- return -1;
- }
- i2c_send(bus, command);
- if (i2c_start_transfer(bus, addr, 1)) {
- i2c_end_transfer(bus);
- return -1;
- }
- data = i2c_recv(bus);
- i2c_nack(bus);
- i2c_end_transfer(bus);
- return data;
-}
-
-int smbus_write_byte(I2CBus *bus, uint8_t addr, uint8_t command, uint8_t data)
-{
- if (i2c_start_transfer(bus, addr, 0)) {
- return -1;
- }
- i2c_send(bus, command);
- i2c_send(bus, data);
- i2c_end_transfer(bus);
- return 0;
-}
-
-int smbus_read_word(I2CBus *bus, uint8_t addr, uint8_t command)
-{
- uint16_t data;
- if (i2c_start_transfer(bus, addr, 0)) {
- return -1;
- }
- i2c_send(bus, command);
- if (i2c_start_transfer(bus, addr, 1)) {
- i2c_end_transfer(bus);
- return -1;
- }
- data = i2c_recv(bus);
- data |= i2c_recv(bus) << 8;
- i2c_nack(bus);
- i2c_end_transfer(bus);
- return data;
-}
-
-int smbus_write_word(I2CBus *bus, uint8_t addr, uint8_t command, uint16_t data)
-{
- if (i2c_start_transfer(bus, addr, 0)) {
- return -1;
- }
- i2c_send(bus, command);
- i2c_send(bus, data & 0xff);
- i2c_send(bus, data >> 8);
- i2c_end_transfer(bus);
- return 0;
-}
-
-int smbus_read_block(I2CBus *bus, uint8_t addr, uint8_t command, uint8_t *data,
- int len, bool recv_len, bool send_cmd)
-{
- int rlen;
- int i;
-
- if (send_cmd) {
- if (i2c_start_transfer(bus, addr, 0)) {
- return -1;
- }
- i2c_send(bus, command);
- }
- if (i2c_start_transfer(bus, addr, 1)) {
- if (send_cmd) {
- i2c_end_transfer(bus);
- }
- return -1;
- }
- if (recv_len) {
- rlen = i2c_recv(bus);
- } else {
- rlen = len;
- }
- if (rlen > len) {
- rlen = 0;
- }
- for (i = 0; i < rlen; i++) {
- data[i] = i2c_recv(bus);
- }
- i2c_nack(bus);
- i2c_end_transfer(bus);
- return rlen;
-}
-
-int smbus_write_block(I2CBus *bus, uint8_t addr, uint8_t command, uint8_t *data,
- int len, bool send_len)
-{
- int i;
-
- if (len > 32)
- len = 32;
-
- if (i2c_start_transfer(bus, addr, 0)) {
- return -1;
- }
- i2c_send(bus, command);
- if (send_len) {
- i2c_send(bus, len);
- }
- for (i = 0; i < len; i++) {
- i2c_send(bus, data[i]);
- }
- i2c_end_transfer(bus);
- return 0;
-}
-
static void smbus_device_class_init(ObjectClass *klass, void *data)
{
I2CSlaveClass *sc = I2C_SLAVE_CLASS(klass);
diff --git a/hw/i386/pc_piix.c b/hw/i386/pc_piix.c
index 63c84e3827..6ba163ccbb 100644
--- a/hw/i386/pc_piix.c
+++ b/hw/i386/pc_piix.c
@@ -42,7 +42,7 @@
#include "sysemu/sysemu.h"
#include "hw/sysbus.h"
#include "sysemu/arch_init.h"
-#include "hw/i2c/smbus.h"
+#include "hw/i2c/smbus_eeprom.h"
#include "hw/xen/xen.h"
#include "exec/memory.h"
#include "exec/address-spaces.h"
diff --git a/hw/i386/pc_q35.c b/hw/i386/pc_q35.c
index b7b7959934..1689885cac 100644
--- a/hw/i386/pc_q35.c
+++ b/hw/i386/pc_q35.c
@@ -33,7 +33,7 @@
#include "hw/hw.h"
#include "hw/loader.h"
#include "sysemu/arch_init.h"
-#include "hw/i2c/smbus.h"
+#include "hw/i2c/smbus_eeprom.h"
#include "hw/boards.h"
#include "hw/timer/mc146818rtc.h"
#include "hw/xen/xen.h"
diff --git a/hw/isa/vt82c686.c b/hw/isa/vt82c686.c
index 7302f6d74b..85d0532dd5 100644
--- a/hw/isa/vt82c686.c
+++ b/hw/isa/vt82c686.c
@@ -14,7 +14,6 @@
#include "hw/hw.h"
#include "hw/isa/vt82c686.h"
#include "hw/i2c/i2c.h"
-#include "hw/i2c/smbus.h"
#include "hw/pci/pci.h"
#include "hw/isa/isa.h"
#include "hw/isa/superio.h"
diff --git a/hw/mips/mips_fulong2e.c b/hw/mips/mips_fulong2e.c
index 2fbba32c48..dae8acc108 100644
--- a/hw/mips/mips_fulong2e.c
+++ b/hw/mips/mips_fulong2e.c
@@ -27,7 +27,7 @@
#include "hw/isa/superio.h"
#include "net/net.h"
#include "hw/boards.h"
-#include "hw/i2c/smbus.h"
+#include "hw/i2c/smbus_eeprom.h"
#include "hw/block/flash.h"
#include "hw/mips/mips.h"
#include "hw/mips/cpudevs.h"
diff --git a/hw/mips/mips_malta.c b/hw/mips/mips_malta.c
index c1cf0fe12e..1fb7170f5e 100644
--- a/hw/mips/mips_malta.c
+++ b/hw/mips/mips_malta.c
@@ -33,7 +33,7 @@
#include "hw/char/serial.h"
#include "net/net.h"
#include "hw/boards.h"
-#include "hw/i2c/smbus.h"
+#include "hw/i2c/smbus_eeprom.h"
#include "hw/block/flash.h"
#include "hw/mips/mips.h"
#include "hw/mips/cpudevs.h"
diff --git a/hw/ppc/sam460ex.c b/hw/ppc/sam460ex.c
index 84ea592749..a04d471433 100644
--- a/hw/ppc/sam460ex.c
+++ b/hw/ppc/sam460ex.c
@@ -34,7 +34,7 @@
#include "hw/sysbus.h"
#include "hw/char/serial.h"
#include "hw/i2c/ppc4xx_i2c.h"
-#include "hw/i2c/smbus.h"
+#include "hw/i2c/smbus_eeprom.h"
#include "hw/usb/hcd-ehci.h"
#include "hw/ppc/fdt.h"
diff --git a/include/hw/i2c/pm_smbus.h b/include/hw/i2c/pm_smbus.h
index 060d3c6ac0..6dd5b7040b 100644
--- a/include/hw/i2c/pm_smbus.h
+++ b/include/hw/i2c/pm_smbus.h
@@ -1,6 +1,8 @@
#ifndef PM_SMBUS_H
#define PM_SMBUS_H
+#include "hw/i2c/smbus_master.h"
+
#define PM_SMBUS_MAX_MSG_SIZE 32
typedef struct PMSMBus {
diff --git a/include/hw/i2c/smbus_eeprom.h b/include/hw/i2c/smbus_eeprom.h
new file mode 100644
index 0000000000..46fb1a37d6
--- /dev/null
+++ b/include/hw/i2c/smbus_eeprom.h
@@ -0,0 +1,32 @@
+/*
+ * QEMU SMBus EEPROM API
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#ifndef HW_SMBUS_EEPROM_H
+#define HW_SMBUS_EEPROM_H
+
+#include "hw/i2c/i2c.h"
+
+void smbus_eeprom_init_one(I2CBus *bus, uint8_t address, uint8_t *eeprom_buf);
+void smbus_eeprom_init(I2CBus *bus, int nb_eeprom,
+ const uint8_t *eeprom_spd, int size);
+
+#endif
diff --git a/include/hw/i2c/smbus_master.h b/include/hw/i2c/smbus_master.h
new file mode 100644
index 0000000000..bb13bc423c
--- /dev/null
+++ b/include/hw/i2c/smbus_master.h
@@ -0,0 +1,55 @@
+/*
+ * QEMU SMBus host (master) API
+ *
+ * Copyright (c) 2007 Arastra, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#ifndef HW_SMBUS_MASTER_H
+#define HW_SMBUS_MASTER_H
+
+#include "hw/i2c/i2c.h"
+
+/* Master device commands. */
+int smbus_quick_command(I2CBus *bus, uint8_t addr, int read);
+int smbus_receive_byte(I2CBus *bus, uint8_t addr);
+int smbus_send_byte(I2CBus *bus, uint8_t addr, uint8_t data);
+int smbus_read_byte(I2CBus *bus, uint8_t addr, uint8_t command);
+int smbus_write_byte(I2CBus *bus, uint8_t addr, uint8_t command, uint8_t data);
+int smbus_read_word(I2CBus *bus, uint8_t addr, uint8_t command);
+int smbus_write_word(I2CBus *bus, uint8_t addr, uint8_t command, uint16_t data);
+
+/*
+ * Do a block transfer from an I2C device. If recv_len is set, then the
+ * first received byte is a length field and is used to know how much data
+ * to receive. Otherwise receive "len" bytes. If send_cmd is set, send
+ * the command byte first before receiving the data.
+ */
+int smbus_read_block(I2CBus *bus, uint8_t addr, uint8_t command, uint8_t *data,
+ int len, bool recv_len, bool send_cmd);
+
+/*
+ * Do a block transfer to an I2C device. If send_len is set, send the
+ * "len" value before the data.
+ */
+int smbus_write_block(I2CBus *bus, uint8_t addr, uint8_t command, uint8_t *data,
+ int len, bool send_len);
+
+#endif
diff --git a/include/hw/i2c/smbus.h b/include/hw/i2c/smbus_slave.h
similarity index 65%
rename from include/hw/i2c/smbus.h
rename to include/hw/i2c/smbus_slave.h
index 5c61c05999..46b8948f0f 100644
--- a/include/hw/i2c/smbus.h
+++ b/include/hw/i2c/smbus_slave.h
@@ -1,8 +1,5 @@
-#ifndef QEMU_SMBUS_H
-#define QEMU_SMBUS_H
-
/*
- * QEMU SMBus API
+ * QEMU SMBus device (slave) API
*
* Copyright (c) 2007 Arastra, Inc.
*
@@ -25,6 +22,9 @@
* THE SOFTWARE.
*/
+#ifndef HW_SMBUS_SLAVE_H
+#define HW_SMBUS_SLAVE_H
+
#include "hw/i2c/i2c.h"
#define TYPE_SMBUS_DEVICE "smbus-device"
@@ -66,33 +66,4 @@ struct SMBusDevice {
uint8_t command;
};
-/* Master device commands. */
-int smbus_quick_command(I2CBus *bus, uint8_t addr, int read);
-int smbus_receive_byte(I2CBus *bus, uint8_t addr);
-int smbus_send_byte(I2CBus *bus, uint8_t addr, uint8_t data);
-int smbus_read_byte(I2CBus *bus, uint8_t addr, uint8_t command);
-int smbus_write_byte(I2CBus *bus, uint8_t addr, uint8_t command, uint8_t data);
-int smbus_read_word(I2CBus *bus, uint8_t addr, uint8_t command);
-int smbus_write_word(I2CBus *bus, uint8_t addr, uint8_t command, uint16_t data);
-
-/*
- * Do a block transfer from an I2C device. If recv_len is set, then the
- * first received byte is a length field and is used to know how much data
- * to receive. Otherwise receive "len" bytes. If send_cmd is set, send
- * the command byte first before receiving the data.
- */
-int smbus_read_block(I2CBus *bus, uint8_t addr, uint8_t command, uint8_t *data,
- int len, bool recv_len, bool send_cmd);
-
-/*
- * Do a block transfer to an I2C device. If send_len is set, send the
- * "len" value before the data.
- */
-int smbus_write_block(I2CBus *bus, uint8_t addr, uint8_t command, uint8_t *data,
- int len, bool send_len);
-
-void smbus_eeprom_init_one(I2CBus *smbus, uint8_t address, uint8_t *eeprom_buf);
-void smbus_eeprom_init(I2CBus *smbus, int nb_eeprom,
- const uint8_t *eeprom_spd, int size);
-
#endif
--
2.17.1
next prev parent reply other threads:[~2019-01-28 18:01 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-28 17:54 [Qemu-devel] [PATCH v4 00/19] Fix/add vmstate handling in some I2C code minyard
2019-01-28 17:54 ` minyard [this message]
2019-01-28 17:54 ` [Qemu-devel] [PATCH v4 02/19] i2c: have I2C receive operation return uint8_t minyard
2019-01-28 17:54 ` [Qemu-devel] [PATCH v4 03/19] arm:i2c: Don't mask return from i2c_recv() minyard
2019-01-28 17:54 ` [Qemu-devel] [PATCH v4 04/19] i2c: Don't check return value " minyard
2019-01-28 17:54 ` [Qemu-devel] [PATCH v4 05/19] i2c:smbus: Correct the working of quick commands minyard
2019-01-28 17:54 ` [Qemu-devel] [PATCH v4 06/19] i2c:smbus: Simplify write operation minyard
2019-01-28 17:54 ` [Qemu-devel] [PATCH v4 07/19] i2c:smbus: Simplify read handling minyard
2019-01-28 17:54 ` [Qemu-devel] [PATCH v4 08/19] i2c:smbus_eeprom: Get rid of the quick command minyard
2019-01-28 17:54 ` [Qemu-devel] [PATCH v4 09/19] i2c:smbus: Make white space in switch statements consistent minyard
2019-01-28 17:54 ` [Qemu-devel] [PATCH v4 10/19] boards.h: Ignore migration for SMBus devices on older machines minyard
2019-01-28 18:08 ` Eduardo Habkost
2019-01-28 18:22 ` Corey Minyard
2019-01-28 17:54 ` [Qemu-devel] [PATCH v4 11/19] i2c:pm_smbus: Fix pm_smbus handling of I2C block read minyard
2019-01-28 17:54 ` [Qemu-devel] [PATCH v4 12/19] migration: Add a VMSTATE_BOOL_TEST() macro minyard
2019-01-28 17:54 ` [Qemu-devel] [PATCH v4 13/19] i2c:pm_smbus: Fix state transfer minyard
2019-01-28 17:54 ` [Qemu-devel] [PATCH v4 14/19] i2c:smbus_slave: Add an SMBus vmstate structure minyard
2019-01-28 17:54 ` [Qemu-devel] [PATCH v4 15/19] i2c:smbus_eeprom: Add normal type name and cast to smbus_eeprom.c minyard
2019-01-28 17:54 ` [Qemu-devel] [PATCH v4 16/19] i2c:smbus_eeprom: Add a size constant for the smbus_eeprom size minyard
2019-01-28 17:54 ` [Qemu-devel] [PATCH v4 17/19] i2c:smbus_eeprom: Add vmstate handling to the smbus eeprom minyard
2019-01-28 17:54 ` [Qemu-devel] [PATCH v4 18/19] i2c:smbus_eeprom: Add a reset function to smbus_eeprom minyard
2019-01-28 17:54 ` [Qemu-devel] [PATCH v4 19/19] i2c: Verify that the count passed in to smbus_eeprom_init() is valid minyard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190128175458.27255-2-minyard@acm.org \
--to=minyard@acm.org \
--cc=cminyard@mvista.com \
--cc=dgilbert@redhat.com \
--cc=mst@redhat.com \
--cc=pbonzini@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).