From: "Philippe Mathieu-Daudé" <philmd@redhat.com>
To: qemu-devel@nongnu.org
Cc: "Paolo Bonzini" <pbonzini@redhat.com>,
"Peter Maydell" <peter.maydell@linaro.org>,
"Marc-André Lureau" <marcandre.lureau@redhat.com>,
"Michael Walle" <michael@walle.cc>, "Fam Zheng" <fam@euphon.net>,
"Daniel P . Berrangé" <berrange@redhat.com>,
"Gerd Hoffmann" <kraxel@redhat.com>,
"Brad Smith" <brad@comstyle.com>,
"Philippe Mathieu-Daudé" <philmd@redhat.com>
Subject: [Qemu-devel] [PATCH v3 1/5] hw/lm32: Move LM32 specific hardware out of common-obj list
Date: Tue, 29 Jan 2019 16:00:25 +0100 [thread overview]
Message-ID: <20190129150029.29829-2-philmd@redhat.com> (raw)
In-Reply-To: <20190129150029.29829-1-philmd@redhat.com>
The LM32 specific hardware is only used by the LM32 target,
it is pointless to compile those objects in other targets.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
hw/audio/Makefile.objs | 2 +-
hw/char/Makefile.objs | 6 +++---
hw/display/Makefile.objs | 4 ++--
hw/intc/Makefile.objs | 2 +-
hw/timer/Makefile.objs | 4 ++--
5 files changed, 9 insertions(+), 9 deletions(-)
diff --git a/hw/audio/Makefile.objs b/hw/audio/Makefile.objs
index 63db383709..c771797c2d 100644
--- a/hw/audio/Makefile.objs
+++ b/hw/audio/Makefile.objs
@@ -13,6 +13,6 @@ common-obj-$(CONFIG_PL041) += pl041.o lm4549.o
common-obj-$(CONFIG_CS4231) += cs4231.o
common-obj-$(CONFIG_MARVELL_88W8618) += marvell_88w8618.o
-common-obj-$(CONFIG_MILKYMIST) += milkymist-ac97.o
+obj-$(CONFIG_MILKYMIST) += milkymist-ac97.o
common-obj-y += soundhw.o
diff --git a/hw/char/Makefile.objs b/hw/char/Makefile.objs
index c4947d7ae7..2c8999a910 100644
--- a/hw/char/Makefile.objs
+++ b/hw/char/Makefile.objs
@@ -26,9 +26,9 @@ common-obj-$(CONFIG_ETRAXFS) += etraxfs_ser.o
common-obj-$(CONFIG_ISA_DEBUG) += debugcon.o
common-obj-$(CONFIG_GRLIB) += grlib_apbuart.o
common-obj-$(CONFIG_IMX) += imx_serial.o
-common-obj-$(CONFIG_LM32) += lm32_juart.o
-common-obj-$(CONFIG_LM32) += lm32_uart.o
-common-obj-$(CONFIG_MILKYMIST) += milkymist-uart.o
+obj-$(CONFIG_LM32) += lm32_juart.o
+obj-$(CONFIG_LM32) += lm32_uart.o
+obj-$(CONFIG_MILKYMIST) += milkymist-uart.o
common-obj-$(CONFIG_SCLPCONSOLE) += sclpconsole.o sclpconsole-lm.o
obj-$(CONFIG_VIRTIO) += virtio-serial-bus.o
diff --git a/hw/display/Makefile.objs b/hw/display/Makefile.objs
index 97acd5b6cb..5b770817c7 100644
--- a/hw/display/Makefile.objs
+++ b/hw/display/Makefile.objs
@@ -25,10 +25,10 @@ common-obj-$(CONFIG_BOCHS_DISPLAY) += edid-region.o
common-obj-$(CONFIG_BLIZZARD) += blizzard.o
common-obj-$(CONFIG_EXYNOS4) += exynos4210_fimd.o
common-obj-$(CONFIG_FRAMEBUFFER) += framebuffer.o
-common-obj-$(CONFIG_MILKYMIST) += milkymist-vgafb.o
+obj-$(CONFIG_MILKYMIST) += milkymist-vgafb.o
common-obj-$(CONFIG_ZAURUS) += tc6393xb.o
-common-obj-$(CONFIG_MILKYMIST_TMU2) += milkymist-tmu2.o
+obj-$(CONFIG_MILKYMIST_TMU2) += milkymist-tmu2.o
milkymist-tmu2.o-cflags := $(X11_CFLAGS)
milkymist-tmu2.o-libs := $(X11_LIBS)
diff --git a/hw/intc/Makefile.objs b/hw/intc/Makefile.objs
index 301a8e972d..82bbbefdeb 100644
--- a/hw/intc/Makefile.objs
+++ b/hw/intc/Makefile.objs
@@ -7,7 +7,7 @@ common-obj-$(CONFIG_XLNX_ZYNQMP) += xlnx-pmu-iomod-intc.o
common-obj-$(CONFIG_XLNX_ZYNQMP) += xlnx-zynqmp-ipi.o
common-obj-$(CONFIG_ETRAXFS) += etraxfs_pic.o
common-obj-$(CONFIG_IMX) += imx_avic.o imx_gpcv2.o
-common-obj-$(CONFIG_LM32) += lm32_pic.o
+obj-$(CONFIG_LM32) += lm32_pic.o
common-obj-$(CONFIG_REALVIEW) += realview_gic.o
common-obj-$(CONFIG_SLAVIO) += slavio_intctl.o
common-obj-$(CONFIG_IOAPIC) += ioapic_common.o
diff --git a/hw/timer/Makefile.objs b/hw/timer/Makefile.objs
index 0e9a4530f8..3a7740f447 100644
--- a/hw/timer/Makefile.objs
+++ b/hw/timer/Makefile.objs
@@ -20,8 +20,8 @@ common-obj-$(CONFIG_ETRAXFS) += etraxfs_timer.o
common-obj-$(CONFIG_GRLIB) += grlib_gptimer.o
common-obj-$(CONFIG_IMX) += imx_epit.o
common-obj-$(CONFIG_IMX) += imx_gpt.o
-common-obj-$(CONFIG_LM32) += lm32_timer.o
-common-obj-$(CONFIG_MILKYMIST) += milkymist-sysctl.o
+obj-$(CONFIG_LM32) += lm32_timer.o
+obj-$(CONFIG_MILKYMIST) += milkymist-sysctl.o
common-obj-$(CONFIG_XLNX_ZYNQMP) += xlnx-zynqmp-rtc.o
common-obj-$(CONFIG_NRF51_SOC) += nrf51_timer.o
--
2.20.1
next prev parent reply other threads:[~2019-01-29 15:01 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-29 15:00 [Qemu-devel] [PATCH v3 0/5] sdl: Let it be optional (in particular, on OpenBSD) Philippe Mathieu-Daudé
2019-01-29 15:00 ` Philippe Mathieu-Daudé [this message]
2019-01-30 7:44 ` [Qemu-devel] [PATCH v3 1/5] hw/lm32: Move LM32 specific hardware out of common-obj list Gerd Hoffmann
2019-01-29 15:00 ` [Qemu-devel] [PATCH v3 2/5] configure: LM32 Milkymist Texture Mapping Unit (tmu2) also depends of X11 Philippe Mathieu-Daudé
2019-01-29 15:00 ` [Qemu-devel] [PATCH v3 3/5] hw/display/milkymist-tmu2: Explicit the dependency to both X11 / OpenGL Philippe Mathieu-Daudé
2019-01-29 15:00 ` [Qemu-devel] [PATCH v3 4/5] configure: Let SDL support be optional on OpenBSD Philippe Mathieu-Daudé
2019-01-30 7:52 ` Gerd Hoffmann
2019-01-29 15:00 ` [Qemu-devel] [PATCH v3 5/5] hw/display/milkymist-tmu2: Move inlined code from header to source Philippe Mathieu-Daudé
2019-02-03 1:24 ` [Qemu-devel] [PATCH v3 0/5] sdl: Let it be optional (in particular, on OpenBSD) no-reply
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190129150029.29829-2-philmd@redhat.com \
--to=philmd@redhat.com \
--cc=berrange@redhat.com \
--cc=brad@comstyle.com \
--cc=fam@euphon.net \
--cc=kraxel@redhat.com \
--cc=marcandre.lureau@redhat.com \
--cc=michael@walle.cc \
--cc=pbonzini@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).