From: Gerd Hoffmann <kraxel@redhat.com>
To: qemu-devel@nongnu.org
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>,
Eduardo Habkost <ehabkost@redhat.com>,
Gerd Hoffmann <kraxel@redhat.com>, Bandan Das <bsd@redhat.com>
Subject: [Qemu-devel] [PULL 7/8] usb-mtp: breakup MTP write into smaller chunks
Date: Wed, 30 Jan 2019 08:34:25 +0100 [thread overview]
Message-ID: <20190130073426.11525-8-kraxel@redhat.com> (raw)
In-Reply-To: <20190130073426.11525-1-kraxel@redhat.com>
From: Bandan Das <bsd@redhat.com>
For every MTP_WRITE_BUF_SZ copied, this patch writes it to file before
getting the next block of data. The file is kept opened for the
duration of the operation but the sanity checks on the write operation
are performed only once when the write operation starts. Additionally,
we also update the file size in the object metadata once the file has
completely been written.
Suggested-by: Gerd Hoffman <kraxel@redhat.com>
Signed-off-by: Bandan Das <bsd@redhat.com>
Message-id: 20190129131908.27924-3-bsd@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
---
hw/usb/dev-mtp.c | 134 +++++++++++++++++++++++++++++++++++++------------------
1 file changed, 91 insertions(+), 43 deletions(-)
diff --git a/hw/usb/dev-mtp.c b/hw/usb/dev-mtp.c
index 2e342c7745..2ca25c9da5 100644
--- a/hw/usb/dev-mtp.c
+++ b/hw/usb/dev-mtp.c
@@ -36,6 +36,13 @@ enum mtp_container_type {
TYPE_EVENT = 4,
};
+/* MTP write stage, for internal use only */
+enum mtp_write_status {
+ WRITE_START = 1,
+ WRITE_CONTINUE = 2,
+ WRITE_END = 3,
+};
+
enum mtp_code {
/* command codes */
CMD_GET_DEVICE_INFO = 0x1001,
@@ -154,6 +161,9 @@ struct MTPData {
/* Used for >4G file sizes */
bool pending;
int fd;
+ uint8_t write_status;
+ /* Internal pointer per every MTP_WRITE_BUF_SZ */
+ uint64_t data_offset;
};
struct MTPObject {
@@ -1620,10 +1630,14 @@ static char *utf16_to_str(uint8_t len, uint16_t *arr)
}
/* Wrapper around write, returns 0 on failure */
-static uint64_t write_retry(int fd, void *buf, uint64_t size)
+static uint64_t write_retry(int fd, void *buf, uint64_t size, off_t offset)
{
uint64_t bytes_left = size, ret;
+ if (lseek(fd, offset, SEEK_SET) < 0) {
+ goto done;
+ }
+
while (bytes_left > 0) {
ret = write(fd, buf, bytes_left);
if ((ret == -1) && (errno != EINTR || errno != EAGAIN ||
@@ -1634,9 +1648,20 @@ static uint64_t write_retry(int fd, void *buf, uint64_t size)
buf += ret;
}
+done:
return size - bytes_left;
}
+static void usb_mtp_update_object(MTPObject *parent, char *name)
+{
+ MTPObject *o =
+ usb_mtp_object_lookup_name(parent, name, strlen(name));
+
+ if (o) {
+ lstat(o->path, &o->stat);
+ }
+}
+
static void usb_mtp_write_data(MTPState *s)
{
MTPData *d = s->data_out;
@@ -1648,48 +1673,56 @@ static void usb_mtp_write_data(MTPState *s)
assert(d != NULL);
- if (parent == NULL || !s->write_pending) {
- usb_mtp_queue_result(s, RES_INVALID_OBJECTINFO, d->trans,
- 0, 0, 0, 0);
+ switch (d->write_status) {
+ case WRITE_START:
+ if (!parent || !s->write_pending) {
+ usb_mtp_queue_result(s, RES_INVALID_OBJECTINFO, d->trans,
+ 0, 0, 0, 0);
return;
- }
-
- if (s->dataset.filename) {
- path = g_strdup_printf("%s/%s", parent->path, s->dataset.filename);
- if (s->dataset.format == FMT_ASSOCIATION) {
- d->fd = mkdir(path, mask);
- goto free;
- }
- if ((s->dataset.size != 0xFFFFFFFF) && (s->dataset.size != d->offset)) {
- usb_mtp_queue_result(s, RES_STORE_FULL, d->trans,
- 0, 0, 0, 0);
- goto done;
- }
- d->fd = open(path, O_CREAT | O_WRONLY | O_CLOEXEC | O_NOFOLLOW, mask);
- if (d->fd == -1) {
- usb_mtp_queue_result(s, RES_STORE_FULL, d->trans,
- 0, 0, 0, 0);
- goto done;
}
- /*
- * Return success if initiator sent 0 sized data
- */
- if (!s->dataset.size) {
- goto success;
- }
+ if (s->dataset.filename) {
+ path = g_strdup_printf("%s/%s", parent->path, s->dataset.filename);
+ if (s->dataset.format == FMT_ASSOCIATION) {
+ d->fd = mkdir(path, mask);
+ goto free;
+ }
+ d->fd = open(path, O_CREAT | O_WRONLY |
+ O_CLOEXEC | O_NOFOLLOW, mask);
+ if (d->fd == -1) {
+ usb_mtp_queue_result(s, RES_STORE_FULL, d->trans,
+ 0, 0, 0, 0);
+ goto done;
+ }
- rc = write_retry(d->fd, d->data, d->offset);
- if (rc != d->offset) {
+ /* Return success if initiator sent 0 sized data */
+ if (!s->dataset.size) {
+ goto success;
+ }
+ if (d->length != MTP_WRITE_BUF_SZ && !d->pending) {
+ d->write_status = WRITE_END;
+ }
+ }
+ /* fall through */
+ case WRITE_CONTINUE:
+ case WRITE_END:
+ rc = write_retry(d->fd, d->data, d->data_offset,
+ d->offset - d->data_offset);
+ if (rc != d->data_offset) {
usb_mtp_queue_result(s, RES_STORE_FULL, d->trans,
0, 0, 0, 0);
goto done;
+ }
+ if (d->write_status != WRITE_END) {
+ return;
+ } else {
+ /* Only for < 4G file sizes */
+ if (s->dataset.size != 0xFFFFFFFF && d->offset != s->dataset.size) {
+ usb_mtp_queue_result(s, RES_INCOMPLETE_TRANSFER, d->trans,
+ 0, 0, 0, 0);
+ goto done;
}
- /* Only for < 4G file sizes */
- if (s->dataset.size != 0xFFFFFFFF && rc != s->dataset.size) {
- usb_mtp_queue_result(s, RES_INCOMPLETE_TRANSFER, d->trans,
- 0, 0, 0, 0);
- goto done;
+ usb_mtp_update_object(parent, s->dataset.filename);
}
}
@@ -1788,25 +1821,33 @@ static void usb_mtp_get_data(MTPState *s, mtp_container *container,
d->offset = 0;
d->first = false;
d->pending = false;
+ d->data_offset = 0;
+ d->write_status = WRITE_START;
}
if (d->pending) {
- usb_mtp_realloc(d, MTP_WRITE_BUF_SZ);
- d->length += MTP_WRITE_BUF_SZ;
+ memset(d->data, 0, d->length);
+ if (d->length != MTP_WRITE_BUF_SZ) {
+ usb_mtp_realloc(d, MTP_WRITE_BUF_SZ - d->length);
+ d->length += (MTP_WRITE_BUF_SZ - d->length);
+ }
d->pending = false;
+ d->write_status = WRITE_CONTINUE;
+ d->data_offset = 0;
}
- if (d->length - d->offset > data_len) {
+ if (d->length - d->data_offset > data_len) {
dlen = data_len;
} else {
- dlen = d->length - d->offset;
+ dlen = d->length - d->data_offset;
}
switch (d->code) {
case CMD_SEND_OBJECT_INFO:
- usb_packet_copy(p, d->data + d->offset, dlen);
+ usb_packet_copy(p, d->data + d->data_offset, dlen);
d->offset += dlen;
- if (d->offset == d->length) {
+ d->data_offset += dlen;
+ if (d->data_offset == d->length) {
/* The operation might have already failed */
if (!s->result) {
usb_mtp_write_metadata(s, dlen);
@@ -1817,19 +1858,26 @@ static void usb_mtp_get_data(MTPState *s, mtp_container *container,
}
break;
case CMD_SEND_OBJECT:
- usb_packet_copy(p, d->data + d->offset, dlen);
+ usb_packet_copy(p, d->data + d->data_offset, dlen);
d->offset += dlen;
+ d->data_offset += dlen;
if ((p->iov.size % 64) || !p->iov.size) {
assert((s->dataset.size == 0xFFFFFFFF) ||
(s->dataset.size == d->offset));
+ if (d->length == MTP_WRITE_BUF_SZ) {
+ d->write_status = WRITE_END;
+ } else {
+ d->write_status = WRITE_START;
+ }
usb_mtp_write_data(s);
usb_mtp_data_free(s->data_out);
s->data_out = NULL;
return;
}
- if (d->offset == d->length) {
+ if (d->data_offset == d->length) {
d->pending = true;
+ usb_mtp_write_data(s);
}
break;
default:
--
2.9.3
next prev parent reply other threads:[~2019-01-30 7:34 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-30 7:34 [Qemu-devel] [PULL 0/8] Usb 20190130 patches Gerd Hoffmann
2019-01-30 7:34 ` [Qemu-devel] [PULL 1/8] usb: assign unique serial numbers to hid devices Gerd Hoffmann
2019-05-17 16:54 ` Dr. David Alan Gilbert
2019-01-30 7:34 ` [Qemu-devel] [PULL 2/8] usb: dev-mtp: close fd in usb_mtp_object_readdir() Gerd Hoffmann
2019-01-30 7:34 ` [Qemu-devel] [PULL 3/8] hw/usb: Fix LGPL information in the file headers Gerd Hoffmann
2019-01-30 7:34 ` [Qemu-devel] [PULL 4/8] usb: XHCI shall not halt isochronous endpoints Gerd Hoffmann
2019-01-30 7:34 ` [Qemu-devel] [PULL 5/8] usb: implement XHCI underrun/overrun events Gerd Hoffmann
2019-01-30 7:34 ` [Qemu-devel] [PULL 6/8] usb-mtp: Reallocate buffer in multiples of MTP_WRITE_BUF_SZ Gerd Hoffmann
2019-01-30 7:34 ` Gerd Hoffmann [this message]
2019-02-14 18:52 ` [Qemu-devel] [PULL 7/8] usb-mtp: breakup MTP write into smaller chunks Peter Maydell
2019-02-15 18:45 ` Bandan Das
2019-02-15 18:55 ` Peter Maydell
2019-02-15 19:22 ` Bandan Das
2019-01-30 7:34 ` [Qemu-devel] [PULL 8/8] usb-mtp: replace the homebrew write with qemu_write_full Gerd Hoffmann
2019-01-31 15:40 ` [Qemu-devel] [PULL 0/8] Usb 20190130 patches Peter Maydell
2019-01-31 18:10 ` no-reply
2019-02-02 21:26 ` no-reply
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190130073426.11525-8-kraxel@redhat.com \
--to=kraxel@redhat.com \
--cc=bsd@redhat.com \
--cc=ehabkost@redhat.com \
--cc=marcel.apfelbaum@gmail.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).