From: Kevin Wolf <kwolf@redhat.com>
To: qemu-block@nongnu.org
Cc: kwolf@redhat.com, peter.maydell@linaro.org, qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 17/27] block: Remove blk_attach_dev_legacy() / legacy_dev code
Date: Fri, 1 Feb 2019 17:35:08 +0100 [thread overview]
Message-ID: <20190201163518.31157-18-kwolf@redhat.com> (raw)
In-Reply-To: <20190201163518.31157-1-kwolf@redhat.com>
From: Thomas Huth <thuth@redhat.com>
The last user of blk_attach_dev_legacy() was the code in xen_disk which
has recently been reworked. Now there is no user for this legacy function
anymore. Thus we can finally remove all code related to the "legacy_dev"
flag, too, and turn the related "void *" in block-backend.c into proper
"DeviceState *" to fix some of the remaining TODOs there.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
include/sysemu/block-backend.h | 5 ++--
block/block-backend.c | 54 ++++++----------------------------
2 files changed, 11 insertions(+), 48 deletions(-)
diff --git a/include/sysemu/block-backend.h b/include/sysemu/block-backend.h
index c8f816a200..832a4bf168 100644
--- a/include/sysemu/block-backend.h
+++ b/include/sysemu/block-backend.h
@@ -110,9 +110,8 @@ void blk_iostatus_disable(BlockBackend *blk);
void blk_iostatus_reset(BlockBackend *blk);
void blk_iostatus_set_err(BlockBackend *blk, int error);
int blk_attach_dev(BlockBackend *blk, DeviceState *dev);
-void blk_attach_dev_legacy(BlockBackend *blk, void *dev);
-void blk_detach_dev(BlockBackend *blk, void *dev);
-void *blk_get_attached_dev(BlockBackend *blk);
+void blk_detach_dev(BlockBackend *blk, DeviceState *dev);
+DeviceState *blk_get_attached_dev(BlockBackend *blk);
char *blk_get_attached_dev_id(BlockBackend *blk);
BlockBackend *blk_by_dev(void *dev);
BlockBackend *blk_by_qdev_id(const char *id, Error **errp);
diff --git a/block/block-backend.c b/block/block-backend.c
index f0be0d9039..f6ea824308 100644
--- a/block/block-backend.c
+++ b/block/block-backend.c
@@ -47,9 +47,7 @@ struct BlockBackend {
QTAILQ_ENTRY(BlockBackend) monitor_link; /* for monitor_block_backends */
BlockBackendPublic public;
- void *dev; /* attached device model, if any */
- bool legacy_dev; /* true if dev is not a DeviceState */
- /* TODO change to DeviceState when all users are qdevified */
+ DeviceState *dev; /* attached device model, if any */
const BlockDevOps *dev_ops;
void *dev_opaque;
@@ -836,7 +834,11 @@ void blk_get_perm(BlockBackend *blk, uint64_t *perm, uint64_t *shared_perm)
*shared_perm = blk->shared_perm;
}
-static int blk_do_attach_dev(BlockBackend *blk, void *dev)
+/*
+ * Attach device model @dev to @blk.
+ * Return 0 on success, -EBUSY when a device model is attached already.
+ */
+int blk_attach_dev(BlockBackend *blk, DeviceState *dev)
{
if (blk->dev) {
return -EBUSY;
@@ -851,40 +853,16 @@ static int blk_do_attach_dev(BlockBackend *blk, void *dev)
blk_ref(blk);
blk->dev = dev;
- blk->legacy_dev = false;
blk_iostatus_reset(blk);
return 0;
}
-/*
- * Attach device model @dev to @blk.
- * Return 0 on success, -EBUSY when a device model is attached already.
- */
-int blk_attach_dev(BlockBackend *blk, DeviceState *dev)
-{
- return blk_do_attach_dev(blk, dev);
-}
-
-/*
- * Attach device model @dev to @blk.
- * @blk must not have a device model attached already.
- * TODO qdevified devices don't use this, remove when devices are qdevified
- */
-void blk_attach_dev_legacy(BlockBackend *blk, void *dev)
-{
- if (blk_do_attach_dev(blk, dev) < 0) {
- abort();
- }
- blk->legacy_dev = true;
-}
-
/*
* Detach device model @dev from @blk.
* @dev must be currently attached to @blk.
*/
-void blk_detach_dev(BlockBackend *blk, void *dev)
-/* TODO change to DeviceState *dev when all users are qdevified */
+void blk_detach_dev(BlockBackend *blk, DeviceState *dev)
{
assert(blk->dev == dev);
blk->dev = NULL;
@@ -898,8 +876,7 @@ void blk_detach_dev(BlockBackend *blk, void *dev)
/*
* Return the device model attached to @blk if any, else null.
*/
-void *blk_get_attached_dev(BlockBackend *blk)
-/* TODO change to return DeviceState * when all users are qdevified */
+DeviceState *blk_get_attached_dev(BlockBackend *blk)
{
return blk->dev;
}
@@ -908,10 +885,7 @@ void *blk_get_attached_dev(BlockBackend *blk)
* device attached to the BlockBackend. */
char *blk_get_attached_dev_id(BlockBackend *blk)
{
- DeviceState *dev;
-
- assert(!blk->legacy_dev);
- dev = blk->dev;
+ DeviceState *dev = blk->dev;
if (!dev) {
return g_strdup("");
@@ -949,11 +923,6 @@ BlockBackend *blk_by_dev(void *dev)
void blk_set_dev_ops(BlockBackend *blk, const BlockDevOps *ops,
void *opaque)
{
- /* All drivers that use blk_set_dev_ops() are qdevified and we want to keep
- * it that way, so we can assume blk->dev, if present, is a DeviceState if
- * blk->dev_ops is set. Non-device users may use dev_ops without device. */
- assert(!blk->legacy_dev);
-
blk->dev_ops = ops;
blk->dev_opaque = opaque;
@@ -979,8 +948,6 @@ void blk_dev_change_media_cb(BlockBackend *blk, bool load, Error **errp)
bool tray_was_open, tray_is_open;
Error *local_err = NULL;
- assert(!blk->legacy_dev);
-
tray_was_open = blk_dev_is_tray_open(blk);
blk->dev_ops->change_media_cb(blk->dev_opaque, load, &local_err);
if (local_err) {
@@ -1783,9 +1750,6 @@ void blk_eject(BlockBackend *blk, bool eject_flag)
BlockDriverState *bs = blk_bs(blk);
char *id;
- /* blk_eject is only called by qdevified devices */
- assert(!blk->legacy_dev);
-
if (bs) {
bdrv_eject(bs, eject_flag);
}
--
2.20.1
next prev parent reply other threads:[~2019-02-01 16:36 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-01 16:34 [Qemu-devel] [PULL 00/27] Block layer patches Kevin Wolf
2019-02-01 16:34 ` [Qemu-devel] [PULL 01/27] mirror: Release the dirty bitmap if mirror_start_job() fails Kevin Wolf
2019-02-01 16:34 ` [Qemu-devel] [PULL 02/27] mirror: Block the source BlockDriverState in mirror_start_job() Kevin Wolf
2019-02-01 16:34 ` [Qemu-devel] [PULL 03/27] qcow2: Assert that refcount block offsets fit in the refcount table Kevin Wolf
2019-02-01 16:34 ` [Qemu-devel] [PULL 04/27] qemu-iotests: add test case for dmg Kevin Wolf
2019-02-01 16:34 ` [Qemu-devel] [PULL 05/27] block: Replace qdict_put() by qdict_put_obj() where appropriate Kevin Wolf
2019-02-01 16:34 ` [Qemu-devel] [PULL 06/27] block: Fix hangs in synchronous APIs with iothreads Kevin Wolf
2019-02-01 16:34 ` [Qemu-devel] [PULL 07/27] iotests: Make 234 stable Kevin Wolf
2019-02-01 16:34 ` [Qemu-devel] [PULL 08/27] vmdk: Refactor vmdk_create_extent Kevin Wolf
2019-02-01 16:35 ` [Qemu-devel] [PULL 09/27] vmdk: Implement .bdrv_co_create callback Kevin Wolf
2019-02-01 16:35 ` [Qemu-devel] [PULL 10/27] iotests: Filter cid numbers in VMDK extent info Kevin Wolf
2019-02-01 16:35 ` [Qemu-devel] [PULL 11/27] iotests: Add VMDK tests for blockdev-create Kevin Wolf
2019-02-01 16:35 ` [Qemu-devel] [PULL 12/27] vmdk: Reject excess extents in blockdev-create Kevin Wolf
2019-02-01 16:35 ` [Qemu-devel] [PULL 13/27] block/vpc: Don't take address of fields in packed structs Kevin Wolf
2019-02-01 16:35 ` [Qemu-devel] [PULL 14/27] block/vdi: " Kevin Wolf
2019-02-01 16:35 ` [Qemu-devel] [PULL 15/27] uuid: Make qemu_uuid_bswap() take and return a QemuUUID Kevin Wolf
2019-02-01 16:35 ` [Qemu-devel] [PULL 16/27] block: Apply auto-read-only for ro-whitelist drivers Kevin Wolf
2019-02-01 16:35 ` Kevin Wolf [this message]
2019-02-01 16:35 ` [Qemu-devel] [PULL 18/27] block: Eliminate the S_1KiB, S_2KiB, ... macros Kevin Wolf
2019-02-01 16:35 ` [Qemu-devel] [PULL 19/27] virtio-scsi: Move BlockBackend back to the main AioContext on unplug Kevin Wolf
2019-02-01 16:35 ` [Qemu-devel] [PULL 20/27] scsi-disk: Acquire the AioContext in scsi_*_realize() Kevin Wolf
2019-02-01 16:35 ` [Qemu-devel] [PULL 21/27] virtio-scsi: Forbid devices with different iothreads sharing a blockdev Kevin Wolf
2019-02-01 16:35 ` [Qemu-devel] [PULL 22/27] iotests: Filter second BLOCK_JOB_ERROR from 229 Kevin Wolf
2019-02-01 16:35 ` [Qemu-devel] [PULL 23/27] iotests/236: fix transaction kwarg order Kevin Wolf
2019-02-01 16:35 ` [Qemu-devel] [PULL 24/27] block: Fix invalidate_cache error path for parent activation Kevin Wolf
2019-02-01 16:35 ` [Qemu-devel] [PULL 25/27] qtest.py: Wait for the result of qtest commands Kevin Wolf
2019-02-01 16:35 ` [Qemu-devel] [PULL 26/27] scsi-disk: Don't use empty string as device id Kevin Wolf
2019-02-01 16:35 ` [Qemu-devel] [PULL 27/27] scsi-disk: Add device_id property Kevin Wolf
2019-02-01 17:24 ` [Qemu-devel] [PULL 00/27] Block layer patches no-reply
2019-02-01 17:24 ` no-reply
2019-02-01 17:27 ` no-reply
2019-02-01 19:05 ` Peter Maydell
2019-02-03 15:10 ` no-reply
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190201163518.31157-18-kwolf@redhat.com \
--to=kwolf@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).