From: Peter Maydell <peter.maydell@linaro.org>
To: qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 05/27] target/arm: Restructure disas_fp_int_conv
Date: Thu, 14 Feb 2019 19:05:41 +0000 [thread overview]
Message-ID: <20190214190603.25030-6-peter.maydell@linaro.org> (raw)
In-Reply-To: <20190214190603.25030-1-peter.maydell@linaro.org>
From: Richard Henderson <richard.henderson@linaro.org>
For opcodes 0-5, move some if conditions into the structure
of a switch statement. For opcodes 6 & 7, decode everything
at once with a second switch.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190206052857.5077-3-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
target/arm/translate-a64.c | 94 ++++++++++++++++++++------------------
1 file changed, 49 insertions(+), 45 deletions(-)
diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c
index e002251ac6f..2f849a6951d 100644
--- a/target/arm/translate-a64.c
+++ b/target/arm/translate-a64.c
@@ -6541,68 +6541,72 @@ static void disas_fp_int_conv(DisasContext *s, uint32_t insn)
int type = extract32(insn, 22, 2);
bool sbit = extract32(insn, 29, 1);
bool sf = extract32(insn, 31, 1);
+ bool itof = false;
if (sbit) {
- unallocated_encoding(s);
- return;
+ goto do_unallocated;
}
- if (opcode > 5) {
- /* FMOV */
- bool itof = opcode & 1;
-
- if (rmode >= 2) {
- unallocated_encoding(s);
- return;
- }
-
- switch (sf << 3 | type << 1 | rmode) {
- case 0x0: /* 32 bit */
- case 0xa: /* 64 bit */
- case 0xd: /* 64 bit to top half of quad */
- break;
- case 0x6: /* 16-bit float, 32-bit int */
- case 0xe: /* 16-bit float, 64-bit int */
- if (dc_isar_feature(aa64_fp16, s)) {
- break;
- }
- /* fallthru */
- default:
- /* all other sf/type/rmode combinations are invalid */
- unallocated_encoding(s);
- return;
- }
-
- if (!fp_access_check(s)) {
- return;
- }
- handle_fmov(s, rd, rn, type, itof);
- } else {
- /* actual FP conversions */
- bool itof = extract32(opcode, 1, 1);
-
- if (rmode != 0 && opcode > 1) {
- unallocated_encoding(s);
- return;
+ switch (opcode) {
+ case 2: /* SCVTF */
+ case 3: /* UCVTF */
+ itof = true;
+ /* fallthru */
+ case 4: /* FCVTAS */
+ case 5: /* FCVTAU */
+ if (rmode != 0) {
+ goto do_unallocated;
}
+ /* fallthru */
+ case 0: /* FCVT[NPMZ]S */
+ case 1: /* FCVT[NPMZ]U */
switch (type) {
case 0: /* float32 */
case 1: /* float64 */
break;
case 3: /* float16 */
- if (dc_isar_feature(aa64_fp16, s)) {
- break;
+ if (!dc_isar_feature(aa64_fp16, s)) {
+ goto do_unallocated;
}
- /* fallthru */
+ break;
default:
- unallocated_encoding(s);
- return;
+ goto do_unallocated;
}
-
if (!fp_access_check(s)) {
return;
}
handle_fpfpcvt(s, rd, rn, opcode, itof, rmode, 64, sf, type);
+ break;
+
+ default:
+ switch (sf << 7 | type << 5 | rmode << 3 | opcode) {
+ case 0b01100110: /* FMOV half <-> 32-bit int */
+ case 0b01100111:
+ case 0b11100110: /* FMOV half <-> 64-bit int */
+ case 0b11100111:
+ if (!dc_isar_feature(aa64_fp16, s)) {
+ goto do_unallocated;
+ }
+ /* fallthru */
+ case 0b00000110: /* FMOV 32-bit */
+ case 0b00000111:
+ case 0b10100110: /* FMOV 64-bit */
+ case 0b10100111:
+ case 0b11001110: /* FMOV top half of 128-bit */
+ case 0b11001111:
+ if (!fp_access_check(s)) {
+ return;
+ }
+ itof = opcode & 1;
+ handle_fmov(s, rd, rn, type, itof);
+ break;
+
+ default:
+ do_unallocated:
+ unallocated_encoding(s);
+ return;
+ }
+ break;
}
}
--
2.20.1
next prev parent reply other threads:[~2019-02-14 19:06 UTC|newest]
Thread overview: 63+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-14 19:05 [Qemu-devel] [PULL 00/27] target-arm queue Peter Maydell
2019-02-14 19:05 ` [Qemu-devel] [PULL 01/27] target/arm: Fix CRn to be 14 for PMEVTYPER/PMEVCNTR Peter Maydell
2019-02-14 19:05 ` [Qemu-devel] [PULL 02/27] target/arm: Implement HACR_EL2 Peter Maydell
2019-02-14 19:05 ` [Qemu-devel] [PULL 03/27] target/arm: Fix int128_make128 lo, hi order in paired_cmpxchg64_be Peter Maydell
2019-02-14 19:05 ` [Qemu-devel] [PULL 04/27] target/arm: Force result size into dp after operation Peter Maydell
2019-02-14 19:05 ` Peter Maydell [this message]
2019-02-14 19:05 ` [Qemu-devel] [PULL 06/27] target/arm: relax permission checks for HWCAP_CPUID registers Peter Maydell
2019-02-14 19:05 ` [Qemu-devel] [PULL 07/27] target/arm: expose CPUID registers to userspace Peter Maydell
2019-02-14 19:05 ` [Qemu-devel] [PULL 08/27] target/arm: expose MPIDR_EL1 " Peter Maydell
2019-02-14 19:05 ` [Qemu-devel] [PULL 09/27] target/arm: expose remaining CPUID registers as RAZ Peter Maydell
2019-02-14 19:05 ` [Qemu-devel] [PULL 10/27] linux-user/elfload: enable HWCAP_CPUID for AArch64 Peter Maydell
2019-02-14 19:05 ` [Qemu-devel] [PULL 11/27] arm: Allow system registers for KVM guests to be changed by QEMU code Peter Maydell
2019-02-21 14:20 ` Auger Eric
2019-02-21 14:23 ` Peter Maydell
2019-02-21 14:26 ` Peter Maydell
2019-02-21 14:55 ` Auger Eric
2019-03-08 15:53 ` Peter Maydell
2019-03-08 16:54 ` Auger Eric
2019-02-21 14:42 ` Alex Bennée
2019-02-26 16:53 ` Peter Maydell
2019-03-11 13:26 ` Peter Maydell
2019-03-11 14:54 ` Auger Eric
2019-03-11 14:55 ` Peter Maydell
2019-03-11 15:09 ` Auger Eric
2019-03-11 16:07 ` Peter Maydell
2019-02-14 19:05 ` [Qemu-devel] [PULL 12/27] MAINTAINERS: Remove Peter Crosthwaite from various entries Peter Maydell
2019-02-14 19:05 ` [Qemu-devel] [PULL 13/27] hw/intc/armv7m_nvic: Allow byte accesses to SHPR1 Peter Maydell
2019-02-14 19:05 ` [Qemu-devel] [PULL 14/27] hw/arm/armsse: Fix miswiring of expansion IRQs Peter Maydell
2019-02-14 19:05 ` [Qemu-devel] [PULL 15/27] target/arm: Rely on optimization within tcg_gen_gvec_or Peter Maydell
2019-02-14 19:05 ` [Qemu-devel] [PULL 16/27] target/arm: Use vector minmax expanders for aarch64 Peter Maydell
2019-02-14 19:05 ` [Qemu-devel] [PULL 17/27] target/arm: Use vector minmax expanders for aarch32 Peter Maydell
2019-02-14 19:05 ` [Qemu-devel] [PULL 18/27] target/arm: Use tcg integer min/max primitives for neon Peter Maydell
2019-02-14 19:05 ` [Qemu-devel] [PULL 19/27] target/arm: Remove neon min/max helpers Peter Maydell
2019-02-14 19:05 ` [Qemu-devel] [PULL 20/27] target/arm: Fix vfp_gdb_get/set_reg vs FPSCR Peter Maydell
2019-02-14 19:05 ` [Qemu-devel] [PULL 21/27] target/arm: Fix arm_cpu_dump_state " Peter Maydell
2019-02-14 19:05 ` [Qemu-devel] [PULL 22/27] target/arm: Split out flags setting from vfp compares Peter Maydell
2019-02-14 19:05 ` [Qemu-devel] [PULL 23/27] target/arm: Fix set of bits kept in xregs[ARM_VFP_FPSCR] Peter Maydell
2019-02-14 19:06 ` [Qemu-devel] [PULL 24/27] target/arm: Split out FPSCR.QC to a vector field Peter Maydell
2019-02-14 19:06 ` [Qemu-devel] [PULL 25/27] target/arm: Use vector operations for saturation Peter Maydell
2019-02-14 19:06 ` [Qemu-devel] [PULL 26/27] target/arm: Add missing clear_tail calls Peter Maydell
2019-02-14 19:06 ` [Qemu-devel] [PULL 27/27] gdbstub: Send a reply to the vKill packet Peter Maydell
2019-02-14 19:56 ` [Qemu-devel] [PULL 00/27] target-arm queue no-reply
2019-02-14 20:30 ` no-reply
2019-02-14 20:57 ` no-reply
2019-02-14 21:24 ` no-reply
2019-02-14 21:51 ` no-reply
2019-02-14 22:18 ` no-reply
2019-02-14 23:39 ` no-reply
2019-02-15 0:07 ` no-reply
2019-02-15 0:11 ` no-reply
2019-02-15 0:34 ` no-reply
2019-02-15 0:38 ` no-reply
2019-02-15 1:01 ` no-reply
2019-02-15 1:20 ` no-reply
2019-02-15 1:24 ` no-reply
2019-02-15 1:28 ` no-reply
2019-02-15 1:32 ` no-reply
2019-02-15 1:48 ` no-reply
2019-02-15 1:56 ` no-reply
2019-02-15 2:15 ` no-reply
2019-02-15 2:19 ` no-reply
2019-02-15 2:24 ` no-reply
2019-02-15 2:43 ` no-reply
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190214190603.25030-6-peter.maydell@linaro.org \
--to=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).