From: "Cédric Le Goater" <clg@kaod.org>
To: David Gibson <david@gibson.dropbear.id.au>
Cc: qemu-ppc@nongnu.org, qemu-devel@nongnu.org,
"Benjamin Herrenschmidt" <benh@kernel.crashing.org>,
"Cédric Le Goater" <clg@kaod.org>
Subject: [Qemu-devel] [PATCH 03/10] target/ppc: Fix support for "STOP light" states on POWER9
Date: Fri, 15 Feb 2019 17:16:41 +0100 [thread overview]
Message-ID: <20190215161648.9600-4-clg@kaod.org> (raw)
In-Reply-To: <20190215161648.9600-1-clg@kaod.org>
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
STOP must act differently based on PSSCR:EC on POWER9. When set, it
acts like the P7/P8 power management instructions and wake up at 0x100
based on the wakeup conditions in LPCR.
When PSSCR:EC is clear however it will wakeup at the next instruction
after STOP (if EE is clear) or take the corresponding interrupts (if
EE is set).
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
---
target/ppc/cpu-qom.h | 1 +
target/ppc/cpu.h | 12 +++++++++---
target/ppc/excp_helper.c | 8 ++++++--
target/ppc/translate.c | 13 ++++++++++++-
target/ppc/translate_init.inc.c | 7 +++++++
5 files changed, 35 insertions(+), 6 deletions(-)
diff --git a/target/ppc/cpu-qom.h b/target/ppc/cpu-qom.h
index 313080230419..e9cb15842387 100644
--- a/target/ppc/cpu-qom.h
+++ b/target/ppc/cpu-qom.h
@@ -122,6 +122,7 @@ typedef enum {
PPC_PM_NAP,
PPC_PM_SLEEP,
PPC_PM_RVWINKLE,
+ PPC_PM_STOP,
} powerpc_pm_insn_t;
/*****************************************************************************/
diff --git a/target/ppc/cpu.h b/target/ppc/cpu.h
index 78af7e460894..190e8127f14f 100644
--- a/target/ppc/cpu.h
+++ b/target/ppc/cpu.h
@@ -414,6 +414,10 @@ struct ppc_slb_t {
#define LPCR_HVICE PPC_BIT(62) /* HV Virtualisation Int Enable */
#define LPCR_HDICE PPC_BIT(63)
+/* PSSCR bits */
+#define PSSCR_ESL PPC_BIT(42) /* Enable State Loss */
+#define PSSCR_EC PPC_BIT(43) /* Exit Criterion */
+
#define msr_sf ((env->msr >> MSR_SF) & 1)
#define msr_isf ((env->msr >> MSR_ISF) & 1)
#define msr_shv ((env->msr >> MSR_SHV) & 1)
@@ -1110,9 +1114,11 @@ struct CPUPPCState {
* instructions and SPRs are diallowed if MSR:HV is 0
*/
bool has_hv_mode;
- /* On P7/P8, set when in PM state, we need to handle resume
- * in a special way (such as routing some resume causes to
- * 0x100), so flag this here.
+
+ /*
+ * On P7/P8/P9, set when in PM state, we need to handle resume in
+ * a special way (such as routing some resume causes to 0x100), so
+ * flag this here.
*/
bool in_pm_state;
#endif
diff --git a/target/ppc/excp_helper.c b/target/ppc/excp_helper.c
index 7c7c8d1b9dc6..97503193ef43 100644
--- a/target/ppc/excp_helper.c
+++ b/target/ppc/excp_helper.c
@@ -97,7 +97,10 @@ static inline void powerpc_excp(PowerPCCPU *cpu, int excp_model, int excp)
asrr0 = -1;
asrr1 = -1;
- /* check for special resume at 0x100 from doze/nap/sleep/winkle on P7/P8 */
+ /*
+ * check for special resume at 0x100 from doze/nap/sleep/winkle on
+ * P7/P8/P9
+ */
if (env->in_pm_state) {
env->in_pm_state = false;
@@ -960,7 +963,8 @@ void helper_pminsn(CPUPPCState *env, powerpc_pm_insn_t insn)
env->pending_interrupts &= ~(1 << PPC_INTERRUPT_HDECR);
/* Condition for waking up at 0x100 */
- env->in_pm_state = true;
+ env->in_pm_state = (insn != PPC_PM_STOP) ||
+ (env->spr[SPR_PSSCR] & PSSCR_EC);
}
#endif /* defined(TARGET_PPC64) */
diff --git a/target/ppc/translate.c b/target/ppc/translate.c
index e94422f7ff1c..75d170d1594f 100644
--- a/target/ppc/translate.c
+++ b/target/ppc/translate.c
@@ -3588,7 +3588,18 @@ static void gen_nap(DisasContext *ctx)
static void gen_stop(DisasContext *ctx)
{
- gen_nap(ctx);
+#if defined(CONFIG_USER_ONLY)
+ GEN_PRIV;
+#else
+ TCGv_i32 t;
+
+ CHK_HV;
+ t = tcg_const_i32(PPC_PM_STOP);
+ gen_helper_pminsn(cpu_env, t);
+ tcg_temp_free_i32(t);
+ /* Stop translation, as the CPU is supposed to sleep from now */
+ gen_exception_nip(ctx, EXCP_HLT, ctx->base.pc_next);
+#endif /* defined(CONFIG_USER_ONLY) */
}
static void gen_sleep(DisasContext *ctx)
diff --git a/target/ppc/translate_init.inc.c b/target/ppc/translate_init.inc.c
index c9985c0d222e..1cfb70aced12 100644
--- a/target/ppc/translate_init.inc.c
+++ b/target/ppc/translate_init.inc.c
@@ -8801,9 +8801,16 @@ static bool cpu_has_work_POWER9(CPUState *cs)
CPUPPCState *env = &cpu->env;
if (cs->halted) {
+ uint64_t psscr = env->spr[SPR_PSSCR];
+
if (!(cs->interrupt_request & CPU_INTERRUPT_HARD)) {
return false;
}
+
+ /* If EC is clear, just return true on any pending interrupt */
+ if (!(psscr & PSSCR_EC)) {
+ return true;
+ }
/* External Exception */
if ((env->pending_interrupts & (1u << PPC_INTERRUPT_EXT)) &&
(env->spr[SPR_LPCR] & LPCR_EEE)) {
--
2.20.1
next prev parent reply other threads:[~2019-02-15 16:17 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-15 16:16 [Qemu-devel] [PATCH 00/10] ppc: Add Hypervisor Virtualization Interrupt on POWER9 Cédric Le Goater
2019-02-15 16:16 ` [Qemu-devel] [PATCH 01/10] target/ppc: Fix nip on power management instructions Cédric Le Goater
2019-02-15 16:16 ` [Qemu-devel] [PATCH 02/10] target/ppc: Don't clobber MSR:EE on PM instructions Cédric Le Goater
2019-02-15 16:16 ` Cédric Le Goater [this message]
2019-02-15 16:16 ` [Qemu-devel] [PATCH 04/10] target/ppc: Move "wakeup reset" code to a separate function Cédric Le Goater
2019-02-15 16:16 ` [Qemu-devel] [PATCH 05/10] target/ppc: Rename "in_pm_state" to "resume_as_sreset" Cédric Le Goater
2019-02-15 16:16 ` [Qemu-devel] [PATCH 06/10] target/ppc: Add POWER9 exception model Cédric Le Goater
2019-02-15 16:16 ` [Qemu-devel] [PATCH 07/10] target/ppc: Detect erroneous condition in interrupt delivery Cédric Le Goater
2019-02-15 16:16 ` [Qemu-devel] [PATCH 08/10] target/ppc: Add Hypervisor Virtualization Interrupt on POWER9 Cédric Le Goater
2019-02-15 16:16 ` [Qemu-devel] [PATCH 09/10] target/ppc: Add POWER9 external interrupt model Cédric Le Goater
2019-02-15 16:16 ` [Qemu-devel] [PATCH 10/10] target/ppc: Add support for LPCR:HEIC on POWER9 Cédric Le Goater
2019-02-19 0:44 ` [Qemu-devel] [PATCH 00/10] ppc: Add Hypervisor Virtualization Interrupt " David Gibson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190215161648.9600-4-clg@kaod.org \
--to=clg@kaod.org \
--cc=benh@kernel.crashing.org \
--cc=david@gibson.dropbear.id.au \
--cc=qemu-devel@nongnu.org \
--cc=qemu-ppc@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).