From: Stefan Berger <stefanb@linux.vnet.ibm.com>
To: qemu-devel@nongnu.org
Cc: peter.maydell@linaro.org, Liam Merwick <liam.merwick@oracle.com>,
Stefan Berger <stefanb@linux.ibm.com>
Subject: [Qemu-devel] [PULL v1 2/2] tpm_tis: convert tpm_tis_show_buffer() to use trace event
Date: Mon, 4 Mar 2019 10:47:39 -0500 [thread overview]
Message-ID: <20190304154739.758486-3-stefanb@linux.vnet.ibm.com> (raw)
In-Reply-To: <20190304154739.758486-1-stefanb@linux.vnet.ibm.com>
From: Liam Merwick <liam.merwick@oracle.com>
cppcheck reports:
[hw/tpm/tpm_tis.c:113]: (warning) %d in format string (no. 2) requires 'int' but the argument type is 'unsigned int'
Rather than just converting the format specifier to use '%u", the
tpm_tis_show_buffer() function is converted to use trace points and
the two debug callers use the trace event infrastructure so that it's
available in production cases also and not just when DEBUG_TIS is enabled.
Signed-off-by: Liam Merwick <liam.merwick@oracle.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
---
hw/tpm/tpm_tis.c | 31 +++++++++++++++++++------------
hw/tpm/trace-events | 1 +
2 files changed, 20 insertions(+), 12 deletions(-)
diff --git a/hw/tpm/tpm_tis.c b/hw/tpm/tpm_tis.c
index 61a130beef..fd183e8deb 100644
--- a/hw/tpm/tpm_tis.c
+++ b/hw/tpm/tpm_tis.c
@@ -106,17 +106,26 @@ static uint8_t tpm_tis_locality_from_addr(hwaddr addr)
static void tpm_tis_show_buffer(const unsigned char *buffer,
size_t buffer_size, const char *string)
{
- uint32_t len, i;
+ size_t len, i;
+ char *line_buffer, *p;
len = MIN(tpm_cmd_get_size(buffer), buffer_size);
- printf("tpm_tis: %s length = %d\n", string, len);
- for (i = 0; i < len; i++) {
+
+ /*
+ * allocate enough room for 3 chars per buffer entry plus a
+ * newline after every 16 chars and a final null terminator.
+ */
+ line_buffer = g_malloc(len * 3 + (len / 16) + 1);
+
+ for (i = 0, p = line_buffer; i < len; i++) {
if (i && !(i % 16)) {
- printf("\n");
+ p += sprintf(p, "\n");
}
- printf("%.2X ", buffer[i]);
+ p += sprintf(p, "%.2X ", buffer[i]);
}
- printf("\n");
+ trace_tpm_tis_show_buffer(string, len, line_buffer);
+
+ g_free(line_buffer);
}
/*
@@ -143,9 +152,8 @@ static void tpm_tis_sts_set(TPMLocality *l, uint32_t flags)
*/
static void tpm_tis_tpm_send(TPMState *s, uint8_t locty)
{
- if (DEBUG_TIS) {
- tpm_tis_show_buffer(s->buffer, s->be_buffer_size,
- "tpm_tis: To TPM");
+ if (trace_event_get_state_backends(TRACE_TPM_TIS_SHOW_BUFFER)) {
+ tpm_tis_show_buffer(s->buffer, s->be_buffer_size, "To TPM");
}
/*
@@ -313,9 +321,8 @@ static void tpm_tis_request_completed(TPMIf *ti, int ret)
s->loc[locty].state = TPM_TIS_STATE_COMPLETION;
s->rw_offset = 0;
- if (DEBUG_TIS) {
- tpm_tis_show_buffer(s->buffer, s->be_buffer_size,
- "tpm_tis: From TPM");
+ if (trace_event_get_state_backends(TRACE_TPM_TIS_SHOW_BUFFER)) {
+ tpm_tis_show_buffer(s->buffer, s->be_buffer_size, "From TPM");
}
if (TPM_TIS_IS_VALID_LOCTY(s->next_locty)) {
diff --git a/hw/tpm/trace-events b/hw/tpm/trace-events
index 920d32ad55..f45dcd2209 100644
--- a/hw/tpm/trace-events
+++ b/hw/tpm/trace-events
@@ -36,6 +36,7 @@ tpm_emulator_pre_save(void) ""
tpm_emulator_inst_init(void) ""
# hw/tpm/tpm_tis.c
+tpm_tis_show_buffer(const char *direction, size_t len, const char *buf) "direction: %s len: %zu\nbuf: %s"
tpm_tis_raise_irq(uint32_t irqmask) "Raising IRQ for flag 0x%08x"
tpm_tis_new_active_locality(uint8_t locty) "Active locality is now %d"
tpm_tis_abort(uint8_t locty) "New active locality is %d"
--
2.17.2
next prev parent reply other threads:[~2019-03-04 15:48 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-04 15:47 [Qemu-devel] [PULL v1 0/2] Merge tpm 2019/02/25 v1 Stefan Berger
2019-03-04 15:47 ` [Qemu-devel] [PULL v1 1/2] tpm_tis: fix loop that cancels any seizure by a lower locality Stefan Berger
2019-03-04 15:47 ` Stefan Berger [this message]
2019-03-04 16:43 ` [Qemu-devel] [PULL v1 0/2] Merge tpm 2019/02/25 v1 Peter Maydell
2019-03-05 22:26 ` Stefan Berger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190304154739.758486-3-stefanb@linux.vnet.ibm.com \
--to=stefanb@linux.vnet.ibm.com \
--cc=liam.merwick@oracle.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=stefanb@linux.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).