From: Igor Mammedov <imammedo@redhat.com>
To: Wei Yang <richardw.yang@linux.intel.com>
Cc: qemu-devel@nongnu.org, mst@redhat.com
Subject: Re: [Qemu-devel] [PATCH v7] i386, acpi: check acpi_memory_hotplug capacity in pre_plug
Date: Wed, 6 Mar 2019 17:18:03 +0100 [thread overview]
Message-ID: <20190306171803.2808e809@Igors-MacBook-Pro.local> (raw)
In-Reply-To: <20190301033548.6691-1-richardw.yang@linux.intel.com>
On Fri, 1 Mar 2019 11:35:48 +0800
Wei Yang <richardw.yang@linux.intel.com> wrote:
> Currently we do device realization like below:
>
> hotplug_handler_pre_plug()
> dc->realize()
> hotplug_handler_plug()
>
> Before we do device realization and plug, we should allocate necessary
> resources and check if memory-hotplug-support property is enabled.
>
> At the piix4 and ich9, the memory-hotplug-support property is checked at
> plug stage. This means that device has been realized and mapped into guest
> address space 'pc_dimm_plug()' by the time acpi plug handler is called,
> where it might fail and crash QEMU due to reaching g_assert_not_reached()
> (piix4) or error_abort (ich9).
>
> Fix it by checking if memory hotplug is enabled at pre_plug stage
> where we can gracefully abort hotplug request.
>
> Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
> CC: Igor Mammedov <imammedo@redhat.com>
> CC: Eric Blake <eblake@redhat.com>
> Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
>
> ---
> v7:
> * fix code style
> v6:
> * fix the check in piix4_device_pre_plug_cb
> v5:
> * rebase on latest upstream
> * remove a comment before hotplug_handler_pre_plug
> * fix alignment for ich9_pm_device_pre_plug_cb
> v4:
> * fix code alignment of piix4_device_pre_plug_cb
> v3:
> * replace acpi_memory_hotplug with memory-hotplug-support in changelog
> * fix code alignment of ich9_pm_device_pre_plug_cb
> * print which device type memory-hotplug-support is disabled in
> ich9_pm_device_pre_plug_cb and piix4_device_pre_plug_cb
> v2:
> * (imammedo@redhat.com)
> - Almost the whole third paragraph
> * apply this change to ich9
> * use hotplug_handler_pre_plug() instead of open-coding check
> ---
> hw/acpi/ich9.c | 15 +++++++++++++--
> hw/acpi/piix4.c | 13 ++++++++++---
> hw/i386/pc.c | 2 ++
> hw/isa/lpc_ich9.c | 1 +
> include/hw/acpi/ich9.h | 2 ++
> 5 files changed, 28 insertions(+), 5 deletions(-)
>
> diff --git a/hw/acpi/ich9.c b/hw/acpi/ich9.c
> index c5d8646abc..e53dfe1ee3 100644
> --- a/hw/acpi/ich9.c
> +++ b/hw/acpi/ich9.c
> @@ -483,13 +483,24 @@ void ich9_pm_add_properties(Object *obj, ICH9LPCPMRegs *pm, Error **errp)
> NULL);
> }
>
> +void ich9_pm_device_pre_plug_cb(HotplugHandler *hotplug_dev, DeviceState *dev,
> + Error **errp)
> +{
> + ICH9LPCState *lpc = ICH9_LPC_DEVICE(hotplug_dev);
> +
> + if (object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM) &&
> + !lpc->pm.acpi_memory_hotplug.is_enabled)
> + error_setg(errp,
> + "memory hotplug is not enabled: %s.memory-hotplug-support "
> + "is not set", object_get_typename(OBJECT(lpc)));
> +}
> +
> void ich9_pm_device_plug_cb(HotplugHandler *hotplug_dev, DeviceState *dev,
> Error **errp)
> {
> ICH9LPCState *lpc = ICH9_LPC_DEVICE(hotplug_dev);
>
> - if (lpc->pm.acpi_memory_hotplug.is_enabled &&
> - object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM)) {
> + if (object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM)) {
> if (object_dynamic_cast(OBJECT(dev), TYPE_NVDIMM)) {
> nvdimm_acpi_plug_cb(hotplug_dev, dev);
> } else {
> diff --git a/hw/acpi/piix4.c b/hw/acpi/piix4.c
> index df8c0db909..c5a4b3f9fe 100644
> --- a/hw/acpi/piix4.c
> +++ b/hw/acpi/piix4.c
> @@ -374,9 +374,17 @@ static void piix4_pm_powerdown_req(Notifier *n, void *opaque)
> static void piix4_device_pre_plug_cb(HotplugHandler *hotplug_dev,
> DeviceState *dev, Error **errp)
> {
> + PIIX4PMState *s = PIIX4_PM(hotplug_dev);
> +
> if (object_dynamic_cast(OBJECT(dev), TYPE_PCI_DEVICE)) {
> acpi_pcihp_device_pre_plug_cb(hotplug_dev, dev, errp);
> - } else if (!object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM) &&
> + } else if (object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM)) {
> + if (!s->acpi_memory_hotplug.is_enabled) {
> + error_setg(errp,
> + "memory hotplug is not enabled: %s.memory-hotplug-support "
> + "is not set", object_get_typename(OBJECT(s)));
> + }
> + } else if (
> !object_dynamic_cast(OBJECT(dev), TYPE_CPU)) {
> error_setg(errp, "acpi: device pre plug request for not supported"
> " device type: %s", object_get_typename(OBJECT(dev)));
> @@ -388,8 +396,7 @@ static void piix4_device_plug_cb(HotplugHandler *hotplug_dev,
> {
> PIIX4PMState *s = PIIX4_PM(hotplug_dev);
>
> - if (s->acpi_memory_hotplug.is_enabled &&
> - object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM)) {
> + if (object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM)) {
> if (object_dynamic_cast(OBJECT(dev), TYPE_NVDIMM)) {
> nvdimm_acpi_plug_cb(hotplug_dev, dev);
> } else {
> diff --git a/hw/i386/pc.c b/hw/i386/pc.c
> index 578f772e7c..64d9e756fa 100644
> --- a/hw/i386/pc.c
> +++ b/hw/i386/pc.c
> @@ -2083,6 +2083,8 @@ static void pc_memory_pre_plug(HotplugHandler *hotplug_dev, DeviceState *dev,
> return;
> }
>
> + hotplug_handler_pre_plug(pcms->acpi_dev, dev, errp);
> +
> if (is_nvdimm && !pcms->acpi_nvdimm_state.is_enabled) {
> error_setg(errp, "nvdimm is not enabled: missing 'nvdimm' in '-M'");
> return;
> diff --git a/hw/isa/lpc_ich9.c b/hw/isa/lpc_ich9.c
> index e692b9fdc1..ac44aa53be 100644
> --- a/hw/isa/lpc_ich9.c
> +++ b/hw/isa/lpc_ich9.c
> @@ -805,6 +805,7 @@ static void ich9_lpc_class_init(ObjectClass *klass, void *data)
> * pc_q35_init()
> */
> dc->user_creatable = false;
> + hc->pre_plug = ich9_pm_device_pre_plug_cb;
> hc->plug = ich9_pm_device_plug_cb;
> hc->unplug_request = ich9_pm_device_unplug_request_cb;
> hc->unplug = ich9_pm_device_unplug_cb;
> diff --git a/include/hw/acpi/ich9.h b/include/hw/acpi/ich9.h
> index 59aeb06393..41568d1837 100644
> --- a/include/hw/acpi/ich9.h
> +++ b/include/hw/acpi/ich9.h
> @@ -74,6 +74,8 @@ extern const VMStateDescription vmstate_ich9_pm;
>
> void ich9_pm_add_properties(Object *obj, ICH9LPCPMRegs *pm, Error **errp);
>
> +void ich9_pm_device_pre_plug_cb(HotplugHandler *hotplug_dev, DeviceState *dev,
> + Error **errp);
> void ich9_pm_device_plug_cb(HotplugHandler *hotplug_dev, DeviceState *dev,
> Error **errp);
> void ich9_pm_device_unplug_request_cb(HotplugHandler *hotplug_dev,
prev parent reply other threads:[~2019-03-06 16:18 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-01 3:35 [Qemu-devel] [PATCH v7] i386, acpi: check acpi_memory_hotplug capacity in pre_plug Wei Yang
2019-03-06 16:18 ` Igor Mammedov [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190306171803.2808e809@Igors-MacBook-Pro.local \
--to=imammedo@redhat.com \
--cc=mst@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=richardw.yang@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).