From: David Gibson <david@gibson.dropbear.id.au>
To: "Cédric Le Goater" <clg@kaod.org>
Cc: qemu-ppc@nongnu.org, qemu-devel@nongnu.org
Subject: Re: [Qemu-devel] [PATCH 14/27] ppc/pnv: add a PSI bridge model class
Date: Thu, 7 Mar 2019 15:08:34 +1100 [thread overview]
Message-ID: <20190307040834.GA4308@umbus.fritz.box> (raw)
In-Reply-To: <20190307040519.GH7722@umbus.fritz.box>
[-- Attachment #1: Type: text/plain, Size: 9281 bytes --]
On Thu, Mar 07, 2019 at 03:05:19PM +1100, David Gibson wrote:
> On Wed, Mar 06, 2019 at 09:50:19AM +0100, Cédric Le Goater wrote:
> > It will ease the introduction of the PSI bridge model for POWER9.
> >
> > Signed-off-by: Cédric Le Goater <clg@kaod.org>
>
> Applied, thanks.
And now unapplied, due to issues revealed in the next patch. See the
comments there.
>
> > ---
> > include/hw/ppc/pnv_psi.h | 21 +++++++++++-
> > hw/ppc/pnv.c | 2 +-
> > hw/ppc/pnv_psi.c | 72 ++++++++++++++++++++++++++++------------
> > 3 files changed, 72 insertions(+), 23 deletions(-)
> >
> > diff --git a/include/hw/ppc/pnv_psi.h b/include/hw/ppc/pnv_psi.h
> > index 64ac73512e81..585a41cd19b6 100644
> > --- a/include/hw/ppc/pnv_psi.h
> > +++ b/include/hw/ppc/pnv_psi.h
> > @@ -25,6 +25,9 @@
> > #define TYPE_PNV_PSI "pnv-psi"
> > #define PNV_PSI(obj) \
> > OBJECT_CHECK(PnvPsi, (obj), TYPE_PNV_PSI)
> > +#define TYPE_PNV8_PSI TYPE_PNV_PSI "-POWER8"
> > +#define PNV8_PSI(obj) \
> > + OBJECT_CHECK(PnvPsi, (obj), TYPE_PNV8_PSI)
> >
> > #define PSIHB_XSCOM_MAX 0x20
> >
> > @@ -48,6 +51,22 @@ typedef struct PnvPsi {
> > MemoryRegion xscom_regs;
> > } PnvPsi;
> >
> > +#define PNV_PSI_CLASS(klass) \
> > + OBJECT_CLASS_CHECK(PnvPsiClass, (klass), TYPE_PNV_PSI)
> > +#define PNV_PSI_GET_CLASS(obj) \
> > + OBJECT_GET_CLASS(PnvPsiClass, (obj), TYPE_PNV_PSI)
> > +
> > +typedef struct PnvPsiClass {
> > + SysBusDeviceClass parent_class;
> > +
> > + int chip_type;
> > + uint32_t xscom_pcba;
> > + uint32_t xscom_size;
> > + uint64_t bar_mask;
> > +
> > + void (*irq_set)(PnvPsi *psi, int, bool state);
> > +} PnvPsiClass;
> > +
> > /* The PSI and FSP interrupts are muxed on the same IRQ number */
> > typedef enum PnvPsiIrq {
> > PSIHB_IRQ_PSI, /* internal use only */
> > @@ -61,6 +80,6 @@ typedef enum PnvPsiIrq {
> >
> > #define PSI_NUM_INTERRUPTS 6
> >
> > -extern void pnv_psi_irq_set(PnvPsi *psi, PnvPsiIrq irq, bool state);
> > +void pnv_psi_irq_set(PnvPsi *psi, int irq, bool state);
> >
> > #endif /* _PPC_PNV_PSI_H */
> > diff --git a/hw/ppc/pnv.c b/hw/ppc/pnv.c
> > index 7660eaa22cf9..67d40dc3eebc 100644
> > --- a/hw/ppc/pnv.c
> > +++ b/hw/ppc/pnv.c
> > @@ -788,7 +788,7 @@ static void pnv_chip_power8_instance_init(Object *obj)
> > Pnv8Chip *chip8 = PNV8_CHIP(obj);
> >
> > object_initialize_child(obj, "psi", &chip8->psi, sizeof(chip8->psi),
> > - TYPE_PNV_PSI, &error_abort, NULL);
> > + TYPE_PNV8_PSI, &error_abort, NULL);
> > object_property_add_const_link(OBJECT(&chip8->psi), "xics",
> > OBJECT(qdev_get_machine()), &error_abort);
> >
> > diff --git a/hw/ppc/pnv_psi.c b/hw/ppc/pnv_psi.c
> > index e61861bfd3c6..e56b455a61b1 100644
> > --- a/hw/ppc/pnv_psi.c
> > +++ b/hw/ppc/pnv_psi.c
> > @@ -118,10 +118,11 @@
> >
> > static void pnv_psi_set_bar(PnvPsi *psi, uint64_t bar)
> > {
> > + PnvPsiClass *ppc = PNV_PSI_GET_CLASS(psi);
> > MemoryRegion *sysmem = get_system_memory();
> > uint64_t old = psi->regs[PSIHB_XSCOM_BAR];
> >
> > - psi->regs[PSIHB_XSCOM_BAR] = bar & (PSIHB_BAR_MASK | PSIHB_BAR_EN);
> > + psi->regs[PSIHB_XSCOM_BAR] = bar & (ppc->bar_mask | PSIHB_BAR_EN);
> >
> > /* Update MR, always remove it first */
> > if (old & PSIHB_BAR_EN) {
> > @@ -130,7 +131,7 @@ static void pnv_psi_set_bar(PnvPsi *psi, uint64_t bar)
> >
> > /* Then add it back if needed */
> > if (bar & PSIHB_BAR_EN) {
> > - uint64_t addr = bar & PSIHB_BAR_MASK;
> > + uint64_t addr = bar & ppc->bar_mask;
> > memory_region_add_subregion(sysmem, addr, &psi->regs_mr);
> > }
> > }
> > @@ -207,7 +208,12 @@ static const uint64_t stat_bits[] = {
> > [PSIHB_IRQ_EXTERNAL] = PSIHB_IRQ_STAT_EXT,
> > };
> >
> > -void pnv_psi_irq_set(PnvPsi *psi, PnvPsiIrq irq, bool state)
> > +void pnv_psi_irq_set(PnvPsi *psi, int irq, bool state)
> > +{
> > + PNV_PSI_GET_CLASS(psi)->irq_set(psi, irq, state);
> > +}
> > +
> > +static void pnv_psi_power8_irq_set(PnvPsi *psi, int irq, bool state)
> > {
> > uint32_t xivr_reg;
> > uint32_t stat_reg;
> > @@ -451,9 +457,9 @@ static void pnv_psi_reset(void *dev)
> > psi->regs[PSIHB_XSCOM_BAR] = psi->bar | PSIHB_BAR_EN;
> > }
> >
> > -static void pnv_psi_init(Object *obj)
> > +static void pnv_psi_power8_instance_init(Object *obj)
> > {
> > - PnvPsi *psi = PNV_PSI(obj);
> > + PnvPsi *psi = PNV8_PSI(obj);
> >
> > object_initialize_child(obj, "ics-psi", &psi->ics, sizeof(psi->ics),
> > TYPE_ICS_SIMPLE, &error_abort, NULL);
> > @@ -468,9 +474,9 @@ static const uint8_t irq_to_xivr[] = {
> > PSIHB_XSCOM_XIVR_EXT,
> > };
> >
> > -static void pnv_psi_realize(DeviceState *dev, Error **errp)
> > +static void pnv_psi_power8_realize(DeviceState *dev, Error **errp)
> > {
> > - PnvPsi *psi = PNV_PSI(dev);
> > + PnvPsi *psi = PNV8_PSI(dev);
> > ICSState *ics = &psi->ics;
> > Object *obj;
> > Error *err = NULL;
> > @@ -524,28 +530,28 @@ static void pnv_psi_realize(DeviceState *dev, Error **errp)
> > qemu_register_reset(pnv_psi_reset, dev);
> > }
> >
> > +static const char compat_p8[] = "ibm,power8-psihb-x\0ibm,psihb-x";
> > +
> > static int pnv_psi_dt_xscom(PnvXScomInterface *dev, void *fdt, int xscom_offset)
> > {
> > - const char compat[] = "ibm,power8-psihb-x\0ibm,psihb-x";
> > + PnvPsiClass *ppc = PNV_PSI_GET_CLASS(dev);
> > char *name;
> > int offset;
> > - uint32_t lpc_pcba = PNV_XSCOM_PSIHB_BASE;
> > uint32_t reg[] = {
> > - cpu_to_be32(lpc_pcba),
> > - cpu_to_be32(PNV_XSCOM_PSIHB_SIZE)
> > + cpu_to_be32(ppc->xscom_pcba),
> > + cpu_to_be32(ppc->xscom_size)
> > };
> >
> > - name = g_strdup_printf("psihb@%x", lpc_pcba);
> > + name = g_strdup_printf("psihb@%x", ppc->xscom_pcba);
> > offset = fdt_add_subnode(fdt, xscom_offset, name);
> > _FDT(offset);
> > g_free(name);
> >
> > - _FDT((fdt_setprop(fdt, offset, "reg", reg, sizeof(reg))));
> > -
> > - _FDT((fdt_setprop_cell(fdt, offset, "#address-cells", 2)));
> > - _FDT((fdt_setprop_cell(fdt, offset, "#size-cells", 1)));
> > - _FDT((fdt_setprop(fdt, offset, "compatible", compat,
> > - sizeof(compat))));
> > + _FDT(fdt_setprop(fdt, offset, "reg", reg, sizeof(reg)));
> > + _FDT(fdt_setprop_cell(fdt, offset, "#address-cells", 2));
> > + _FDT(fdt_setprop_cell(fdt, offset, "#size-cells", 1));
> > + _FDT(fdt_setprop(fdt, offset, "compatible", compat_p8,
> > + sizeof(compat_p8)));
> > return 0;
> > }
> >
> > @@ -555,6 +561,28 @@ static Property pnv_psi_properties[] = {
> > DEFINE_PROP_END_OF_LIST(),
> > };
> >
> > +static void pnv_psi_power8_class_init(ObjectClass *klass, void *data)
> > +{
> > + DeviceClass *dc = DEVICE_CLASS(klass);
> > + PnvPsiClass *ppc = PNV_PSI_CLASS(klass);
> > +
> > + dc->desc = "PowerNV PSI Controller POWER8";
> > + dc->realize = pnv_psi_power8_realize;
> > +
> > + ppc->chip_type = PNV_CHIP_POWER8;
> > + ppc->xscom_pcba = PNV_XSCOM_PSIHB_BASE;
> > + ppc->xscom_size = PNV_XSCOM_PSIHB_SIZE;
> > + ppc->bar_mask = PSIHB_BAR_MASK;
> > + ppc->irq_set = pnv_psi_power8_irq_set;
> > +}
> > +
> > +static const TypeInfo pnv_psi_power8_info = {
> > + .name = TYPE_PNV8_PSI,
> > + .parent = TYPE_PNV_PSI,
> > + .instance_init = pnv_psi_power8_instance_init,
> > + .class_init = pnv_psi_power8_class_init,
> > +};
> > +
> > static void pnv_psi_class_init(ObjectClass *klass, void *data)
> > {
> > DeviceClass *dc = DEVICE_CLASS(klass);
> > @@ -562,7 +590,7 @@ static void pnv_psi_class_init(ObjectClass *klass, void *data)
> >
> > xdc->dt_xscom = pnv_psi_dt_xscom;
> >
> > - dc->realize = pnv_psi_realize;
> > + dc->desc = "PowerNV PSI Controller";
> > dc->props = pnv_psi_properties;
> > }
> >
> > @@ -570,8 +598,9 @@ static const TypeInfo pnv_psi_info = {
> > .name = TYPE_PNV_PSI,
> > .parent = TYPE_SYS_BUS_DEVICE,
> > .instance_size = sizeof(PnvPsi),
> > - .instance_init = pnv_psi_init,
> > .class_init = pnv_psi_class_init,
> > + .class_size = sizeof(PnvPsiClass),
> > + .abstract = true,
> > .interfaces = (InterfaceInfo[]) {
> > { TYPE_PNV_XSCOM_INTERFACE },
> > { }
> > @@ -581,6 +610,7 @@ static const TypeInfo pnv_psi_info = {
> > static void pnv_psi_register_types(void)
> > {
> > type_register_static(&pnv_psi_info);
> > + type_register_static(&pnv_psi_power8_info);
> > }
> >
> > -type_init(pnv_psi_register_types)
> > +type_init(pnv_psi_register_types);
>
--
David Gibson | I'll have my music baroque, and my code
david AT gibson.dropbear.id.au | minimalist, thank you. NOT _the_ _other_
| _way_ _around_!
http://www.ozlabs.org/~dgibson
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
next prev parent reply other threads:[~2019-03-07 4:22 UTC|newest]
Thread overview: 55+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-06 8:50 [Qemu-devel] [PATCH 00/27] ppc: add POWER9 support to the PowerNV platform Cédric Le Goater
2019-03-06 8:50 ` [Qemu-devel] [PATCH 01/27] ppc/xive: hardwire the Physical CAM line of the thread context Cédric Le Goater
2019-03-07 1:19 ` David Gibson
2019-03-06 8:50 ` [Qemu-devel] [PATCH 02/27] ppc: externalize ppc_get_vcpu_by_pir() Cédric Le Goater
2019-03-06 8:50 ` [Qemu-devel] [PATCH 03/27] ppc/xive: export the TIMA memory accessors Cédric Le Goater
2019-03-06 8:50 ` [Qemu-devel] [PATCH 04/27] ppc/pnv: export the xive_router_notify() routine Cédric Le Goater
2019-03-06 8:50 ` [Qemu-devel] [PATCH 05/27] ppc/pnv: change the CPU machine_data presenter type to Object * Cédric Le Goater
2019-03-07 1:36 ` David Gibson
2019-03-06 8:50 ` [Qemu-devel] [PATCH 06/27] ppc/pnv: add a XIVE interrupt controller model for POWER9 Cédric Le Goater
2019-03-07 1:37 ` David Gibson
2019-03-06 8:50 ` [Qemu-devel] [PATCH 07/27] ppc/pnv: introduce a new dt_populate() operation to the chip model Cédric Le Goater
2019-03-07 1:44 ` David Gibson
2019-03-06 8:50 ` [Qemu-devel] [PATCH 08/27] ppc/pnv: introduce a new pic_print_info() " Cédric Le Goater
2019-03-07 1:46 ` David Gibson
2019-03-06 8:50 ` [Qemu-devel] [PATCH 09/27] ppc/xive: activate HV support Cédric Le Goater
2019-03-07 1:48 ` David Gibson
2019-03-06 8:50 ` [Qemu-devel] [PATCH 10/27] ppc/xive: Make XIVE generate the proper interrupt types Cédric Le Goater
2019-03-07 3:29 ` David Gibson
2019-03-06 8:50 ` [Qemu-devel] [PATCH 11/27] ppc/pnv: fix logging primitives using Ox Cédric Le Goater
2019-03-07 3:30 ` David Gibson
2019-03-06 8:50 ` [Qemu-devel] [PATCH 12/27] ppc/pnv: psi: add a PSIHB_REG macro Cédric Le Goater
2019-03-07 3:30 ` David Gibson
2019-03-06 8:50 ` [Qemu-devel] [PATCH 13/27] ppc/pnv: psi: add a reset handler Cédric Le Goater
2019-03-07 3:32 ` David Gibson
2019-03-06 8:50 ` [Qemu-devel] [PATCH 14/27] ppc/pnv: add a PSI bridge model class Cédric Le Goater
2019-03-07 4:05 ` David Gibson
2019-03-07 4:08 ` David Gibson [this message]
2019-03-06 8:50 ` [Qemu-devel] [PATCH 15/27] ppc/pnv: add a PSI bridge model for POWER9 Cédric Le Goater
2019-03-07 4:10 ` David Gibson
2019-03-07 6:37 ` Cédric Le Goater
2019-03-07 22:33 ` Cédric Le Goater
2019-03-08 0:17 ` David Gibson
2019-03-08 6:45 ` Cédric Le Goater
2019-03-06 8:50 ` [Qemu-devel] [PATCH 16/27] ppc/pnv: lpc: fix OPB address ranges Cédric Le Goater
2019-03-07 4:11 ` David Gibson
2019-03-06 8:50 ` [Qemu-devel] [PATCH 17/27] ppc/pnv: add a LPC Controller model class Cédric Le Goater
2019-03-07 4:12 ` David Gibson
2019-03-06 8:50 ` [Qemu-devel] [PATCH 18/27] ppc/pnv: add a LPC Controller model for POWER9 Cédric Le Goater
2019-03-07 4:18 ` David Gibson
2019-03-07 7:07 ` Cédric Le Goater
2019-03-08 0:19 ` David Gibson
2019-03-08 6:49 ` Cédric Le Goater
2019-03-06 8:50 ` [Qemu-devel] [PATCH 19/27] ppc/pnv: add SerIRQ routing registers Cédric Le Goater
2019-03-06 8:50 ` [Qemu-devel] [PATCH 20/27] ppc/pnv: add a OCC model class Cédric Le Goater
2019-03-07 4:26 ` David Gibson
2019-03-06 8:50 ` [Qemu-devel] [PATCH 21/27] ppc/pnv: add a OCC model for POWER9 Cédric Le Goater
2019-03-07 4:27 ` David Gibson
2019-03-07 7:47 ` Cédric Le Goater
2019-03-06 8:50 ` [Qemu-devel] [PATCH 22/27] ppc/pnv: extend XSCOM core support " Cédric Le Goater
2019-03-07 4:28 ` David Gibson
2019-03-06 8:50 ` [Qemu-devel] [PATCH 23/27] ppc/pnv: POWER9 XSCOM quad support Cédric Le Goater
2019-03-06 8:50 ` [Qemu-devel] [PATCH 24/27] ppc/pnv: activate XSCOM tests for POWER9 Cédric Le Goater
2019-03-06 8:50 ` [Qemu-devel] [PATCH 25/27] ppc/pnv: add more dummy XSCOM addresses Cédric Le Goater
2019-03-06 8:50 ` [Qemu-devel] [PATCH 26/27] ppc/pnv: add a "ibm, opal/power-mgt" device tree node on POWER9 Cédric Le Goater
2019-03-06 8:50 ` [Qemu-devel] [PATCH 27/27] target/ppc: add HV support for POWER9 Cédric Le Goater
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190307040834.GA4308@umbus.fritz.box \
--to=david@gibson.dropbear.id.au \
--cc=clg@kaod.org \
--cc=qemu-devel@nongnu.org \
--cc=qemu-ppc@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).