From: Richard Henderson <richard.henderson@linaro.org>
To: qemu-devel@nongnu.org
Cc: peter.maydell@linaro.org
Subject: [Qemu-devel] [PATCH v4 16/22] target/arm: Implement data cache set allocation tags
Date: Thu, 7 Mar 2019 09:04:34 -0800 [thread overview]
Message-ID: <20190307170440.3113-17-richard.henderson@linaro.org> (raw)
In-Reply-To: <20190307170440.3113-1-richard.henderson@linaro.org>
This is DC GVA and DC GZVA.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
v2: Use allocation_tag_mem + memset.
v3: Require pre-cleaned addresses.
---
target/arm/cpu.h | 4 +++-
target/arm/helper-a64.h | 1 +
target/arm/helper.c | 16 ++++++++++++++++
target/arm/mte_helper.c | 28 ++++++++++++++++++++++++++++
target/arm/translate-a64.c | 9 +++++++++
5 files changed, 57 insertions(+), 1 deletion(-)
diff --git a/target/arm/cpu.h b/target/arm/cpu.h
index b9b33bc285..e24d1e082c 100644
--- a/target/arm/cpu.h
+++ b/target/arm/cpu.h
@@ -2178,7 +2178,9 @@ static inline uint64_t cpreg_to_kvm_id(uint32_t cpregid)
#define ARM_CP_NZCV (ARM_CP_SPECIAL | 0x0300)
#define ARM_CP_CURRENTEL (ARM_CP_SPECIAL | 0x0400)
#define ARM_CP_DC_ZVA (ARM_CP_SPECIAL | 0x0500)
-#define ARM_LAST_SPECIAL ARM_CP_DC_ZVA
+#define ARM_CP_DC_GVA (ARM_CP_SPECIAL | 0x0600)
+#define ARM_CP_DC_GZVA (ARM_CP_SPECIAL | 0x0700)
+#define ARM_LAST_SPECIAL ARM_CP_DC_GZVA
#define ARM_CP_FPU 0x1000
#define ARM_CP_SVE 0x2000
#define ARM_CP_NO_GDB 0x4000
diff --git a/target/arm/helper-a64.h b/target/arm/helper-a64.h
index 5bcdfcf81b..ec4e7f7cf5 100644
--- a/target/arm/helper-a64.h
+++ b/target/arm/helper-a64.h
@@ -117,3 +117,4 @@ DEF_HELPER_FLAGS_3(st2g_parallel, TCG_CALL_NO_WG, void, env, i64, i64)
DEF_HELPER_FLAGS_2(ldgm, TCG_CALL_NO_WG, i64, env, i64)
DEF_HELPER_FLAGS_3(stgm, TCG_CALL_NO_WG, void, env, i64, i64)
DEF_HELPER_FLAGS_3(stzgm, TCG_CALL_NO_WG, void, env, i64, i64)
+DEF_HELPER_FLAGS_2(dc_gva, TCG_CALL_NO_RWG, void, env, i64)
diff --git a/target/arm/helper.c b/target/arm/helper.c
index a16c87d0d9..c8773a5528 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -5841,6 +5841,22 @@ static const ARMCPRegInfo mte_reginfo[] = {
{ .name = "CIGDVAC", .state = ARM_CP_STATE_AA64,
.opc0 = 1, .opc1 = 3, .crn = 7, .crm = 14, .opc2 = 5,
.type = ARM_CP_NOP, .access = PL1_W },
+ { .name = "GVA", .state = ARM_CP_STATE_AA64,
+ .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 4, .opc2 = 3,
+ .access = PL0_W, .type = ARM_CP_DC_GVA,
+#ifndef CONFIG_USER_ONLY
+ /* Avoid overhead of an access check that always passes in user-mode */
+ .accessfn = aa64_zva_access,
+#endif
+ },
+ { .name = "GZVA", .state = ARM_CP_STATE_AA64,
+ .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 4, .opc2 = 4,
+ .access = PL0_W, .type = ARM_CP_DC_GZVA,
+#ifndef CONFIG_USER_ONLY
+ /* Avoid overhead of an access check that always passes in user-mode */
+ .accessfn = aa64_zva_access,
+#endif
+ },
REGINFO_SENTINEL
};
#endif
diff --git a/target/arm/mte_helper.c b/target/arm/mte_helper.c
index afa4c26535..6d0f82eb99 100644
--- a/target/arm/mte_helper.c
+++ b/target/arm/mte_helper.c
@@ -473,3 +473,31 @@ void HELPER(stzgm)(CPUARMState *env, uint64_t ptr, uint64_t val)
}
}
}
+
+void HELPER(dc_gva)(CPUARMState *env, uint64_t ptr)
+{
+ ARMCPU *cpu = arm_env_get_cpu(env);
+ size_t blocklen = 4 << cpu->dcz_blocksize;
+ int el;
+ uint64_t sctlr;
+ uint8_t *mem;
+ int rtag;
+
+ ptr = QEMU_ALIGN_DOWN(ptr, blocklen);
+
+ /* Trap if accessing an invalid page. */
+ mem = allocation_tag_mem(env, ptr, true, GETPC());
+
+ /* No action if page does not support tags, or if access is disabled. */
+ el = arm_current_el(env);
+ sctlr = arm_sctlr(env, el);
+ if (!mem || !allocation_tag_access_enabled(env, el, sctlr)) {
+ return;
+ }
+
+ rtag = allocation_tag_from_addr(ptr);
+ rtag |= rtag << 4;
+
+ assert(QEMU_IS_ALIGNED(blocklen, 2 * TAG_GRANULE));
+ memset(mem, rtag, blocklen / (2 * TAG_GRANULE));
+}
diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c
index a02c829db2..74ef1cd9c1 100644
--- a/target/arm/translate-a64.c
+++ b/target/arm/translate-a64.c
@@ -1897,6 +1897,15 @@ static void handle_sys(DisasContext *s, uint32_t insn, bool isread,
tcg_rt = clean_data_tbi(s, cpu_reg(s, rt), false);
gen_helper_dc_zva(cpu_env, tcg_rt);
return;
+ case ARM_CP_DC_GVA:
+ tcg_rt = clean_data_tbi(s, cpu_reg(s, rt), false);
+ gen_helper_dc_gva(cpu_env, tcg_rt);
+ return;
+ case ARM_CP_DC_GZVA:
+ tcg_rt = clean_data_tbi(s, cpu_reg(s, rt), false);
+ gen_helper_dc_zva(cpu_env, tcg_rt);
+ gen_helper_dc_gva(cpu_env, tcg_rt);
+ return;
default:
break;
}
--
2.17.2
next prev parent reply other threads:[~2019-03-07 17:06 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-07 17:04 [Qemu-devel] [PATCH v4 00/22] target/arm: Implement ARMv8.5-MemTag, system mode Richard Henderson
2019-03-07 17:04 ` [Qemu-devel] [PATCH v4 01/22] target/arm: Add MTE_ACTIVE to tb_flags Richard Henderson
2019-03-07 17:04 ` [Qemu-devel] [PATCH v4 02/22] target/arm: Extract TCMA with ARMVAParameters Richard Henderson
2019-03-07 17:04 ` [Qemu-devel] [PATCH v4 03/22] target/arm: Add MTE system registers Richard Henderson
2019-03-08 10:31 ` Laurent Desnogues
2019-03-08 10:37 ` Laurent Desnogues
2019-03-07 17:04 ` [Qemu-devel] [PATCH v4 04/22] target/arm: Add helper_mte_check{1, 2} Richard Henderson
2019-03-07 17:04 ` [Qemu-devel] [PATCH v4 05/22] target/arm: Suppress tag check for sp+offset Richard Henderson
2019-03-07 17:04 ` [Qemu-devel] [PATCH v4 06/22] target/arm: Implement the IRG instruction Richard Henderson
2019-03-07 17:04 ` [Qemu-devel] [PATCH v4 07/22] target/arm: Implement ADDG, SUBG instructions Richard Henderson
2019-03-07 17:04 ` [Qemu-devel] [PATCH v4 08/22] target/arm: Implement the GMI instruction Richard Henderson
2019-03-07 17:04 ` [Qemu-devel] [PATCH v4 09/22] target/arm: Implement the SUBP instruction Richard Henderson
2019-03-07 17:04 ` [Qemu-devel] [PATCH v4 10/22] target/arm: Define arm_cpu_do_unaligned_access for CONFIG_USER_ONLY Richard Henderson
2019-03-07 17:04 ` [Qemu-devel] [PATCH v4 11/22] target/arm: Implement LDG, STG, ST2G instructions Richard Henderson
2019-03-07 17:04 ` [Qemu-devel] [PATCH v4 12/22] target/arm: Implement the STGP instruction Richard Henderson
2019-03-07 17:04 ` [Qemu-devel] [PATCH v4 13/22] target/arm: Implement the LDGM and STGM instructions Richard Henderson
2019-03-07 17:04 ` [Qemu-devel] [PATCH v4 14/22] target/arm: Implement the access tag cache flushes Richard Henderson
2019-03-07 17:04 ` [Qemu-devel] [PATCH v4 15/22] target/arm: Clean address for DC ZVA Richard Henderson
2019-03-07 17:04 ` Richard Henderson [this message]
2019-03-07 17:04 ` [Qemu-devel] [PATCH v4 17/22] target/arm: Set PSTATE.TCO on exception entry Richard Henderson
2019-03-07 17:04 ` [Qemu-devel] [PATCH v4 18/22] target/arm: Cache the Tagged bit for a page in MemTxAttrs Richard Henderson
2019-03-07 17:04 ` [Qemu-devel] [PATCH v4 19/22] target/arm: Create tagged ram when MTE is enabled Richard Henderson
2019-07-22 16:03 ` Peter Maydell
2019-03-07 17:04 ` [Qemu-devel] [PATCH v4 20/22] target/arm: Create a TLB entry for tag physical address space Richard Henderson
2019-07-19 15:48 ` Peter Maydell
2019-07-19 21:31 ` Richard Henderson
2019-03-07 17:04 ` [Qemu-devel] [PATCH v4 21/22] target/arm: Add allocation tag storage for system mode Richard Henderson
2019-03-07 17:04 ` [Qemu-devel] [PATCH v4 22/22] target/arm: Enable MTE Richard Henderson
2019-03-07 17:35 ` [Qemu-devel] [PATCH v4 00/22] target/arm: Implement ARMv8.5-MemTag, system mode no-reply
2019-03-08 18:40 ` no-reply
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190307170440.3113-17-richard.henderson@linaro.org \
--to=richard.henderson@linaro.org \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).