qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: David Gibson <david@gibson.dropbear.id.au>
To: Markus Armbruster <armbru@redhat.com>
Cc: qemu-devel@nongnu.org, alex.bennee@linaro.org, lersek@redhat.com,
	kwolf@redhat.com, mreitz@redhat.com, qemu-block@nongnu.org,
	qemu-ppc@nongnu.org, philmd@redhat.com, balaton@eik.bme.hu
Subject: Re: [Qemu-devel] [PATCH v3 07/14] ppc405_boards: Don't size flash memory to match backing image
Date: Fri, 8 Mar 2019 11:10:32 +1100	[thread overview]
Message-ID: <20190308001032.GF7722@umbus.fritz.box> (raw)
In-Reply-To: <20190307130323.9353-8-armbru@redhat.com>

[-- Attachment #1: Type: text/plain, Size: 6651 bytes --]

On Thu, Mar 07, 2019 at 02:03:16PM +0100, Markus Armbruster wrote:
> Machine "ref405ep" maps its flash memory at address 2^32 - image size.
> Image size is rounded up to the next multiple of 64KiB.  Useless,
> because pflash_cfi02_realize() fails with "failed to read the initial
> flash content" unless the rounding is a no-op.
> 
> If the image size exceeds 0x80000 Bytes, we overlap first SRAM, then
> other stuff.  No idea how that would play out, but useful outcomes
> seem unlikely.
> 
> Map the flash memory at fixed address 0xFFF80000 with size 512KiB,
> regardless of image size, to match the physical hardware.
> 
> Machine "taihu" maps its boot flash memory similarly.  The code even
> has a comment /* XXX: should check that size is 2MB */, followed by
> disabled code to adjust the size to 2MiB regardless of image size.
> 
> Its code to map its application flash memory looks the same, except
> there the XXX comment asks for 32MiB, and the code to adjust the size
> isn't disabled.  Note that pflash_cfi02_realize() fails with "failed
> to read the initial flash content" for images smaller than 32MiB.
> 
> Map the boot flash memory at fixed address 0xFFE00000 with size 2MiB,
> to match the physical hardware.  Delete dead code from application
> flash mapping, and simplify some.
> 
> Cc: David Gibson <david@gibson.dropbear.id.au>
> Signed-off-by: Markus Armbruster <armbru@redhat.com>
> Acked-by: David Gibson <david@gibson.dropbear.id.au>
> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>

I'm assuming because this is in a series I'm not otherwise CCed on
that this is going in through someone else's tree.  Let me know if you
want me take it through mine.

> ---
>  hw/ppc/ppc405_boards.c | 51 +++++++++++++-----------------------------
>  1 file changed, 15 insertions(+), 36 deletions(-)
> 
> diff --git a/hw/ppc/ppc405_boards.c b/hw/ppc/ppc405_boards.c
> index f47b15f10e..672717ef1b 100644
> --- a/hw/ppc/ppc405_boards.c
> +++ b/hw/ppc/ppc405_boards.c
> @@ -158,7 +158,7 @@ static void ref405ep_init(MachineState *machine)
>      target_ulong kernel_base, initrd_base;
>      long kernel_size, initrd_size;
>      int linux_boot;
> -    int fl_idx, fl_sectors, len;
> +    int len;
>      DriveInfo *dinfo;
>      MemoryRegion *sysmem = get_system_memory();
>  
> @@ -185,26 +185,19 @@ static void ref405ep_init(MachineState *machine)
>  #ifdef DEBUG_BOARD_INIT
>      printf("%s: register BIOS\n", __func__);
>  #endif
> -    fl_idx = 0;
>  #ifdef USE_FLASH_BIOS
> -    dinfo = drive_get(IF_PFLASH, 0, fl_idx);
> +    dinfo = drive_get(IF_PFLASH, 0, 0);
>      if (dinfo) {
> -        BlockBackend *blk = blk_by_legacy_dinfo(dinfo);
> -
> -        bios_size = blk_getlength(blk);
> -        fl_sectors = (bios_size + 65535) >> 16;
>  #ifdef DEBUG_BOARD_INIT
> -        printf("Register parallel flash %d size %lx"
> -               " at addr %lx '%s' %d\n",
> -               fl_idx, bios_size, -bios_size,
> -               blk_name(blk), fl_sectors);
> +        printf("Register parallel flash\n");
>  #endif
> +        bios_size = 8 * MiB;
>          pflash_cfi02_register((uint32_t)(-bios_size),
>                                NULL, "ef405ep.bios", bios_size,
> -                              blk, 65536, fl_sectors, 1,
> +                              dinfo ? blk_by_legacy_dinfo(dinfo) : NULL,
> +                              64 * KiB, bios_size / (64 * KiB), 1,
>                                2, 0x0001, 0x22DA, 0x0000, 0x0000, 0x555, 0x2AA,
>                                1);
> -        fl_idx++;
>      } else
>  #endif
>      {
> @@ -455,7 +448,7 @@ static void taihu_405ep_init(MachineState *machine)
>      target_ulong kernel_base, initrd_base;
>      long kernel_size, initrd_size;
>      int linux_boot;
> -    int fl_idx, fl_sectors;
> +    int fl_idx;
>      DriveInfo *dinfo;
>  
>      /* RAM is soldered to the board so the size cannot be changed */
> @@ -486,21 +479,14 @@ static void taihu_405ep_init(MachineState *machine)
>  #if defined(USE_FLASH_BIOS)
>      dinfo = drive_get(IF_PFLASH, 0, fl_idx);
>      if (dinfo) {
> -        BlockBackend *blk = blk_by_legacy_dinfo(dinfo);
> -
> -        bios_size = blk_getlength(blk);
> -        /* XXX: should check that size is 2MB */
> -        //        bios_size = 2 * 1024 * 1024;
> -        fl_sectors = (bios_size + 65535) >> 16;
>  #ifdef DEBUG_BOARD_INIT
> -        printf("Register parallel flash %d size %lx"
> -               " at addr %lx '%s' %d\n",
> -               fl_idx, bios_size, -bios_size,
> -               blk_name(blk), fl_sectors);
> +        printf("Register boot flash\n");
>  #endif
> -        pflash_cfi02_register((uint32_t)(-bios_size),
> +        bios_size = 2 * MiB;
> +        pflash_cfi02_register(0xFFE00000,
>                                NULL, "taihu_405ep.bios", bios_size,
> -                              blk, 65536, fl_sectors, 1,
> +                              dinfo ? blk_by_legacy_dinfo(dinfo) : NULL,
> +                              64 * KiB, bios_size / (64 * KiB), 1,
>                                4, 0x0001, 0x22DA, 0x0000, 0x0000, 0x555, 0x2AA,
>                                1);
>          fl_idx++;
> @@ -536,20 +522,13 @@ static void taihu_405ep_init(MachineState *machine)
>      /* Register Linux flash */
>      dinfo = drive_get(IF_PFLASH, 0, fl_idx);
>      if (dinfo) {
> -        BlockBackend *blk = blk_by_legacy_dinfo(dinfo);
> -
> -        bios_size = blk_getlength(blk);
> -        /* XXX: should check that size is 32MB */
>          bios_size = 32 * MiB;
> -        fl_sectors = (bios_size + 65535) >> 16;
>  #ifdef DEBUG_BOARD_INIT
> -        printf("Register parallel flash %d size %lx"
> -               " at addr " TARGET_FMT_lx " '%s'\n",
> -               fl_idx, bios_size, (target_ulong)0xfc000000,
> -               blk_name(blk));
> +        printf("Register application flash\n"
>  #endif
>          pflash_cfi02_register(0xfc000000, NULL, "taihu_405ep.flash", bios_size,
> -                              blk, 65536, fl_sectors, 1,
> +                              dinfo ? blk_by_legacy_dinfo(dinfo) : NULL,
> +                              64 * KiB, bios_size / (64 * KiB), 1,
>                                4, 0x0001, 0x22DA, 0x0000, 0x0000, 0x555, 0x2AA,
>                                1);
>          fl_idx++;

-- 
David Gibson			| I'll have my music baroque, and my code
david AT gibson.dropbear.id.au	| minimalist, thank you.  NOT _the_ _other_
				| _way_ _around_!
http://www.ozlabs.org/~dgibson

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

  reply	other threads:[~2019-03-08  0:10 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-03-07 13:03 [Qemu-devel] [PATCH v3 00/14] pflash: Fixes and cleanups Markus Armbruster
2019-03-07 13:03 ` [Qemu-devel] [PATCH v3 01/14] pflash: Rename pflash_t to PFlashCFI01, PFlashCFI02 Markus Armbruster
2019-03-07 13:03 ` [Qemu-devel] [PATCH v3 02/14] pflash_cfi01: Do not exit() on guest aborting "write to buffer" Markus Armbruster
2019-03-07 13:03 ` [Qemu-devel] [PATCH v3 03/14] pflash_cfi01: Log use of flawed " Markus Armbruster
2019-03-07 13:03 ` [Qemu-devel] [PATCH v3 04/14] pflash: Rename *CFI_PFLASH* to *PFLASH_CFI* Markus Armbruster
2019-03-07 13:03 ` [Qemu-devel] [PATCH v3 05/14] hw: Use PFLASH_CFI0{1, 2} and TYPE_PFLASH_CFI0{1, 2} Markus Armbruster
2019-03-07 13:03 ` [Qemu-devel] [PATCH v3 06/14] sam460ex: Don't size flash memory to match backing image Markus Armbruster
2019-03-08 14:04   ` Philippe Mathieu-Daudé
2019-03-08 14:27     ` Markus Armbruster
2019-03-08 14:34       ` Philippe Mathieu-Daudé
2019-03-07 13:03 ` [Qemu-devel] [PATCH v3 07/14] ppc405_boards: " Markus Armbruster
2019-03-08  0:10   ` David Gibson [this message]
2019-03-08  7:24     ` Markus Armbruster
2019-03-08 11:09       ` David Gibson
2019-03-07 13:03 ` [Qemu-devel] [PATCH v3 08/14] r2d: Fix flash memory size, sector size, width, device ID Markus Armbruster
2019-03-07 13:51   ` Philippe Mathieu-Daudé
2019-03-07 13:03 ` [Qemu-devel] [PATCH v3 09/14] hw/mips/malta: Fix the DEBUG_BOARD_INIT code Markus Armbruster
2019-03-07 13:03 ` [Qemu-devel] [PATCH v3 10/14] hw/mips/malta: Remove fl_sectors variable Markus Armbruster
2019-03-07 13:03 ` [Qemu-devel] [PATCH v3 11/14] hw/mips/malta: Restrict 'bios_size' variable scope Markus Armbruster
2019-03-07 13:03 ` [Qemu-devel] [PATCH v3 12/14] mips_malta: Clean up definition of flash memory size somewhat Markus Armbruster
2019-03-07 13:03 ` [Qemu-devel] [PATCH v3 13/14] pflash: Clean up after commit 368a354f02b, part 1 Markus Armbruster
2019-03-07 13:03 ` [Qemu-devel] [PATCH v3 14/14] pflash: Clean up after commit 368a354f02b, part 2 Markus Armbruster
2019-03-08 14:05   ` Philippe Mathieu-Daudé
2019-03-09 13:27 ` [Qemu-devel] [PATCH v3 00/14] pflash: Fixes and cleanups no-reply

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190308001032.GF7722@umbus.fritz.box \
    --to=david@gibson.dropbear.id.au \
    --cc=alex.bennee@linaro.org \
    --cc=armbru@redhat.com \
    --cc=balaton@eik.bme.hu \
    --cc=kwolf@redhat.com \
    --cc=lersek@redhat.com \
    --cc=mreitz@redhat.com \
    --cc=philmd@redhat.com \
    --cc=qemu-block@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    --cc=qemu-ppc@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).