* [Qemu-devel] [PULL 0/5] Vga 20190308 patches
@ 2019-03-08 12:39 Gerd Hoffmann
2019-03-08 12:39 ` [Qemu-devel] [PULL 1/5] hw/display: Add basic ATI VGA emulation Gerd Hoffmann
` (5 more replies)
0 siblings, 6 replies; 9+ messages in thread
From: Gerd Hoffmann @ 2019-03-08 12:39 UTC (permalink / raw)
To: qemu-devel
Cc: Paolo Bonzini, Marcel Apfelbaum, Aleksandar Markovic,
Aurelien Jarno, Aleksandar Rikalo, Michael S. Tsirkin,
Gerd Hoffmann
The following changes since commit 32694e98b8d7a246345448a8f707d2e11d6c65e2:
Merge remote-tracking branch 'remotes/ehabkost/tags/machine-next-pull-request' into staging (2019-03-06 18:52:19 +0000)
are available in the Git repository at:
git://git.kraxel.org/qemu tags/vga-20190308-pull-request
for you to fetch changes up to 61dbd9eaa1450f94886fb41366e4687d405c52c8:
virtio-gpu: make virtio_gpu_reset static (2019-03-08 09:36:23 +0100)
----------------------------------------------------------------
vga: virtio reset fix, add ati emulation.
----------------------------------------------------------------
BALATON Zoltan (2):
hw/display: Add basic ATI VGA emulation
mips_fulong2e: Add on-board graphics chip
Gerd Hoffmann (3):
virtio: add class_size to VirtioPCIDeviceTypeInfo
virtio-vga: fix reset.
virtio-gpu: make virtio_gpu_reset static
hw/display/ati_int.h | 96 ++++
hw/display/ati_regs.h | 461 ++++++++++++++++++
hw/virtio/virtio-pci.h | 1 +
include/hw/virtio/virtio-gpu.h | 1 -
hw/display/ati.c | 865 +++++++++++++++++++++++++++++++++
hw/display/ati_2d.c | 167 +++++++
hw/display/ati_dbg.c | 259 ++++++++++
hw/display/virtio-gpu.c | 2 +-
hw/display/virtio-vga.c | 17 +-
hw/mips/mips_fulong2e.c | 6 +
hw/virtio/virtio-pci.c | 1 +
vl.c | 1 +
default-configs/pci.mak | 1 +
hw/display/Makefile.objs | 2 +
hw/display/trace-events | 4 +
15 files changed, 1880 insertions(+), 4 deletions(-)
create mode 100644 hw/display/ati_int.h
create mode 100644 hw/display/ati_regs.h
create mode 100644 hw/display/ati.c
create mode 100644 hw/display/ati_2d.c
create mode 100644 hw/display/ati_dbg.c
--
2.18.1
^ permalink raw reply [flat|nested] 9+ messages in thread* [Qemu-devel] [PULL 1/5] hw/display: Add basic ATI VGA emulation 2019-03-08 12:39 [Qemu-devel] [PULL 0/5] Vga 20190308 patches Gerd Hoffmann @ 2019-03-08 12:39 ` Gerd Hoffmann 2019-03-08 16:16 ` BALATON Zoltan 2019-03-08 12:39 ` [Qemu-devel] [PULL 2/5] mips_fulong2e: Add on-board graphics chip Gerd Hoffmann ` (4 subsequent siblings) 5 siblings, 1 reply; 9+ messages in thread From: Gerd Hoffmann @ 2019-03-08 12:39 UTC (permalink / raw) To: qemu-devel Cc: Paolo Bonzini, Marcel Apfelbaum, Aleksandar Markovic, Aurelien Jarno, Aleksandar Rikalo, Michael S. Tsirkin, Gerd Hoffmann, BALATON Zoltan From: BALATON Zoltan <balaton@eik.bme.hu> At least two machines, the PPC mac99 and MIPS fulong2e, have an ATI gfx chip by default (Rage 128 Pro and M6/RV100 respectively) and guests running on these and the PMON2000 firmware of the fulong2e expect this to be available. Fortunately these are very similar chips so they can be mostly emulated in the same device model. This patch adds basic emulation of these ATI VGA chips. While this is incomplete and currently only enough to run the MIPS firmware and get framebuffer output with Linux, it allows the fulong2e board to work more like the real hardware and having it in QEMU in this state provides a way to experiment with it and allows others to contribute to improve it. It is compiled for all archs but only the fulong2e (which currently has no display output at all) is set to use it by default (in a separate patch). Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Acked-by: Aleksandar Markovic <amarkovic@wavecomp.com> Message-id: 20190308002431.466C87456B2@zero.eik.bme.hu Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> --- hw/display/ati_int.h | 96 +++++ hw/display/ati_regs.h | 461 +++++++++++++++++++++ hw/display/ati.c | 865 +++++++++++++++++++++++++++++++++++++++ hw/display/ati_2d.c | 167 ++++++++ hw/display/ati_dbg.c | 259 ++++++++++++ vl.c | 1 + default-configs/pci.mak | 1 + hw/display/Makefile.objs | 2 + hw/display/trace-events | 4 + 9 files changed, 1856 insertions(+) create mode 100644 hw/display/ati_int.h create mode 100644 hw/display/ati_regs.h create mode 100644 hw/display/ati.c create mode 100644 hw/display/ati_2d.c create mode 100644 hw/display/ati_dbg.c diff --git a/hw/display/ati_int.h b/hw/display/ati_int.h new file mode 100644 index 000000000000..a6f3e20e6319 --- /dev/null +++ b/hw/display/ati_int.h @@ -0,0 +1,96 @@ +/* + * QEMU ATI SVGA emulation + * + * Copyright (c) 2019 BALATON Zoltan + * + * This work is licensed under the GNU GPL license version 2 or later. + */ + +#ifndef ATI_INT_H +#define ATI_INT_H + +#include "qemu/osdep.h" +#include "hw/pci/pci.h" +#include "vga_int.h" + +/*#define DEBUG_ATI*/ + +#ifdef DEBUG_ATI +#define DPRINTF(fmt, ...) printf("%s: " fmt, __func__, ## __VA_ARGS__) +#else +#define DPRINTF(fmt, ...) do {} while (0) +#endif + +#define PCI_VENDOR_ID_ATI 0x1002 +/* Rage128 Pro GL */ +#define PCI_DEVICE_ID_ATI_RAGE128_PF 0x5046 +/* Radeon RV100 (VE) */ +#define PCI_DEVICE_ID_ATI_RADEON_QY 0x5159 + +#define TYPE_ATI_VGA "ati-vga" +#define ATI_VGA(obj) OBJECT_CHECK(ATIVGAState, (obj), TYPE_ATI_VGA) + +typedef struct ATIVGARegs { + uint32_t mm_index; + uint32_t bios_scratch[8]; + uint32_t crtc_gen_cntl; + uint32_t crtc_ext_cntl; + uint32_t dac_cntl; + uint32_t crtc_h_total_disp; + uint32_t crtc_h_sync_strt_wid; + uint32_t crtc_v_total_disp; + uint32_t crtc_v_sync_strt_wid; + uint32_t crtc_offset; + uint32_t crtc_offset_cntl; + uint32_t crtc_pitch; + uint32_t cur_offset; + uint32_t cur_hv_pos; + uint32_t cur_hv_offs; + uint32_t cur_color0; + uint32_t cur_color1; + uint32_t dst_offset; + uint32_t dst_pitch; + uint32_t dst_tile; + uint32_t dst_width; + uint32_t dst_height; + uint32_t src_offset; + uint32_t src_pitch; + uint32_t src_tile; + uint32_t src_x; + uint32_t src_y; + uint32_t dst_x; + uint32_t dst_y; + uint32_t dp_gui_master_cntl; + uint32_t dp_brush_bkgd_clr; + uint32_t dp_brush_frgd_clr; + uint32_t dp_src_frgd_clr; + uint32_t dp_src_bkgd_clr; + uint32_t dp_cntl; + uint32_t dp_datatype; + uint32_t dp_mix; + uint32_t dp_write_mask; + uint32_t default_offset; + uint32_t default_pitch; + uint32_t default_sc_bottom_right; +} ATIVGARegs; + +typedef struct ATIVGAState { + PCIDevice dev; + VGACommonState vga; + char *model; + uint16_t dev_id; + uint8_t mode; + bool cursor_guest_mode; + uint16_t cursor_size; + uint32_t cursor_offset; + QEMUCursor *cursor; + MemoryRegion io; + MemoryRegion mm; + ATIVGARegs regs; +} ATIVGAState; + +const char *ati_reg_name(int num); + +void ati_2d_blt(ATIVGAState *s); + +#endif /* ATI_INT_H */ diff --git a/hw/display/ati_regs.h b/hw/display/ati_regs.h new file mode 100644 index 000000000000..923bfd33ceb7 --- /dev/null +++ b/hw/display/ati_regs.h @@ -0,0 +1,461 @@ +/* + * ATI VGA register definitions + * + * based on: + * linux/include/video/aty128.h + * Register definitions for ATI Rage128 boards + * Anthony Tong <atong@uiuc.edu>, 1999 + * Brad Douglas <brad@neruo.com>, 2000 + * + * and linux/include/video/radeon.h + * + * This work is licensed under the GNU GPL license version 2. + */ + +/* + * Register mapping: + * 0x0000-0x00ff Misc regs also accessible via io and mmio space + * 0x0100-0x0eff Misc regs only accessible via mmio + * 0x0f00-0x0fff Read-only copy of PCI config regs + * 0x1000-0x13ff Concurrent Command Engine (CCE) regs + * 0x1400-0x1fff GUI (drawing engine) regs + */ + +#ifndef ATI_REGS_H +#define ATI_REGS_H + +#undef DEFAULT_PITCH /* needed for mingw builds */ + +#define MM_INDEX 0x0000 +#define MM_DATA 0x0004 +#define CLOCK_CNTL_INDEX 0x0008 +#define CLOCK_CNTL_DATA 0x000c +#define BIOS_0_SCRATCH 0x0010 +#define BUS_CNTL 0x0030 +#define BUS_CNTL1 0x0034 +#define GEN_INT_CNTL 0x0040 +#define CRTC_GEN_CNTL 0x0050 +#define CRTC_EXT_CNTL 0x0054 +#define DAC_CNTL 0x0058 +#define GPIO_MONID 0x0068 +#define I2C_CNTL_1 0x0094 +#define PALETTE_INDEX 0x00b0 +#define PALETTE_DATA 0x00b4 +#define CNFG_CNTL 0x00e0 +#define GEN_RESET_CNTL 0x00f0 +#define CNFG_MEMSIZE 0x00f8 +#define MEM_CNTL 0x0140 +#define MC_FB_LOCATION 0x0148 +#define MC_AGP_LOCATION 0x014C +#define MC_STATUS 0x0150 +#define MEM_POWER_MISC 0x015c +#define AGP_BASE 0x0170 +#define AGP_CNTL 0x0174 +#define AGP_APER_OFFSET 0x0178 +#define PCI_GART_PAGE 0x017c +#define PC_NGUI_MODE 0x0180 +#define PC_NGUI_CTLSTAT 0x0184 +#define MPP_TB_CONFIG 0x01C0 +#define MPP_GP_CONFIG 0x01C8 +#define VIPH_CONTROL 0x01D0 +#define CRTC_H_TOTAL_DISP 0x0200 +#define CRTC_H_SYNC_STRT_WID 0x0204 +#define CRTC_V_TOTAL_DISP 0x0208 +#define CRTC_V_SYNC_STRT_WID 0x020c +#define CRTC_VLINE_CRNT_VLINE 0x0210 +#define CRTC_CRNT_FRAME 0x0214 +#define CRTC_GUI_TRIG_VLINE 0x0218 +#define CRTC_OFFSET 0x0224 +#define CRTC_OFFSET_CNTL 0x0228 +#define CRTC_PITCH 0x022c +#define OVR_CLR 0x0230 +#define OVR_WID_LEFT_RIGHT 0x0234 +#define OVR_WID_TOP_BOTTOM 0x0238 +#define CUR_OFFSET 0x0260 +#define CUR_HORZ_VERT_POSN 0x0264 +#define CUR_HORZ_VERT_OFF 0x0268 +#define CUR_CLR0 0x026c +#define CUR_CLR1 0x0270 +#define LVDS_GEN_CNTL 0x02d0 +#define DDA_CONFIG 0x02e0 +#define DDA_ON_OFF 0x02e4 +#define VGA_DDA_CONFIG 0x02e8 +#define VGA_DDA_ON_OFF 0x02ec +#define CRTC2_H_TOTAL_DISP 0x0300 +#define CRTC2_H_SYNC_STRT_WID 0x0304 +#define CRTC2_V_TOTAL_DISP 0x0308 +#define CRTC2_V_SYNC_STRT_WID 0x030c +#define CRTC2_VLINE_CRNT_VLINE 0x0310 +#define CRTC2_CRNT_FRAME 0x0314 +#define CRTC2_GUI_TRIG_VLINE 0x0318 +#define CRTC2_OFFSET 0x0324 +#define CRTC2_OFFSET_CNTL 0x0328 +#define CRTC2_PITCH 0x032c +#define DDA2_CONFIG 0x03e0 +#define DDA2_ON_OFF 0x03e4 +#define CRTC2_GEN_CNTL 0x03f8 +#define CRTC2_STATUS 0x03fc +#define OV0_SCALE_CNTL 0x0420 +#define SUBPIC_CNTL 0x0540 +#define PM4_BUFFER_OFFSET 0x0700 +#define PM4_BUFFER_CNTL 0x0704 +#define PM4_BUFFER_WM_CNTL 0x0708 +#define PM4_BUFFER_DL_RPTR_ADDR 0x070c +#define PM4_BUFFER_DL_RPTR 0x0710 +#define PM4_BUFFER_DL_WPTR 0x0714 +#define PM4_VC_FPU_SETUP 0x071c +#define PM4_FPU_CNTL 0x0720 +#define PM4_VC_FORMAT 0x0724 +#define PM4_VC_CNTL 0x0728 +#define PM4_VC_I01 0x072c +#define PM4_VC_VLOFF 0x0730 +#define PM4_VC_VLSIZE 0x0734 +#define PM4_IW_INDOFF 0x0738 +#define PM4_IW_INDSIZE 0x073c +#define PM4_FPU_FPX0 0x0740 +#define PM4_FPU_FPY0 0x0744 +#define PM4_FPU_FPX1 0x0748 +#define PM4_FPU_FPY1 0x074c +#define PM4_FPU_FPX2 0x0750 +#define PM4_FPU_FPY2 0x0754 +#define PM4_FPU_FPY3 0x0758 +#define PM4_FPU_FPY4 0x075c +#define PM4_FPU_FPY5 0x0760 +#define PM4_FPU_FPY6 0x0764 +#define PM4_FPU_FPR 0x0768 +#define PM4_FPU_FPG 0x076c +#define PM4_FPU_FPB 0x0770 +#define PM4_FPU_FPA 0x0774 +#define PM4_FPU_INTXY0 0x0780 +#define PM4_FPU_INTXY1 0x0784 +#define PM4_FPU_INTXY2 0x0788 +#define PM4_FPU_INTARGB 0x078c +#define PM4_FPU_FPTWICEAREA 0x0790 +#define PM4_FPU_DMAJOR01 0x0794 +#define PM4_FPU_DMAJOR12 0x0798 +#define PM4_FPU_DMAJOR02 0x079c +#define PM4_FPU_STAT 0x07a0 +#define PM4_STAT 0x07b8 +#define PM4_TEST_CNTL 0x07d0 +#define PM4_MICROCODE_ADDR 0x07d4 +#define PM4_MICROCODE_RADDR 0x07d8 +#define PM4_MICROCODE_DATAH 0x07dc +#define PM4_MICROCODE_DATAL 0x07e0 +#define PM4_CMDFIFO_ADDR 0x07e4 +#define PM4_CMDFIFO_DATAH 0x07e8 +#define PM4_CMDFIFO_DATAL 0x07ec +#define PM4_BUFFER_ADDR 0x07f0 +#define PM4_BUFFER_DATAH 0x07f4 +#define PM4_BUFFER_DATAL 0x07f8 +#define PM4_MICRO_CNTL 0x07fc +#define CAP0_TRIG_CNTL 0x0950 +#define CAP1_TRIG_CNTL 0x09c0 + +#define RBBM_STATUS 0x0e40 + +/* + * GUI Block Memory Mapped Registers + * These registers are FIFOed. + */ +#define PM4_FIFO_DATA_EVEN 0x1000 +#define PM4_FIFO_DATA_ODD 0x1004 + +#define DST_OFFSET 0x1404 +#define DST_PITCH 0x1408 +#define DST_WIDTH 0x140c +#define DST_HEIGHT 0x1410 +#define SRC_X 0x1414 +#define SRC_Y 0x1418 +#define DST_X 0x141c +#define DST_Y 0x1420 +#define SRC_PITCH_OFFSET 0x1428 +#define DST_PITCH_OFFSET 0x142c +#define SRC_Y_X 0x1434 +#define DST_Y_X 0x1438 +#define DST_HEIGHT_WIDTH 0x143c +#define DP_GUI_MASTER_CNTL 0x146c +#define BRUSH_SCALE 0x1470 +#define BRUSH_Y_X 0x1474 +#define DP_BRUSH_BKGD_CLR 0x1478 +#define DP_BRUSH_FRGD_CLR 0x147c +#define DST_WIDTH_X 0x1588 +#define DST_HEIGHT_WIDTH_8 0x158c +#define SRC_X_Y 0x1590 +#define DST_X_Y 0x1594 +#define DST_WIDTH_HEIGHT 0x1598 +#define DST_WIDTH_X_INCY 0x159c +#define DST_HEIGHT_Y 0x15a0 +#define DST_X_SUB 0x15a4 +#define DST_Y_SUB 0x15a8 +#define SRC_OFFSET 0x15ac +#define SRC_PITCH 0x15b0 +#define DST_HEIGHT_WIDTH_BW 0x15b4 +#define CLR_CMP_CNTL 0x15c0 +#define CLR_CMP_CLR_SRC 0x15c4 +#define CLR_CMP_CLR_DST 0x15c8 +#define CLR_CMP_MASK 0x15cc +#define DP_SRC_FRGD_CLR 0x15d8 +#define DP_SRC_BKGD_CLR 0x15dc +#define DST_BRES_ERR 0x1628 +#define DST_BRES_INC 0x162c +#define DST_BRES_DEC 0x1630 +#define DST_BRES_LNTH 0x1634 +#define DST_BRES_LNTH_SUB 0x1638 +#define SC_LEFT 0x1640 +#define SC_RIGHT 0x1644 +#define SC_TOP 0x1648 +#define SC_BOTTOM 0x164c +#define SRC_SC_RIGHT 0x1654 +#define SRC_SC_BOTTOM 0x165c +#define GUI_DEBUG0 0x16a0 +#define GUI_DEBUG1 0x16a4 +#define GUI_TIMEOUT 0x16b0 +#define GUI_TIMEOUT0 0x16b4 +#define GUI_TIMEOUT1 0x16b8 +#define GUI_PROBE 0x16bc +#define DP_CNTL 0x16c0 +#define DP_DATATYPE 0x16c4 +#define DP_MIX 0x16c8 +#define DP_WRITE_MASK 0x16cc +#define DP_CNTL_XDIR_YDIR_YMAJOR 0x16d0 +#define DEFAULT_OFFSET 0x16e0 +#define DEFAULT_PITCH 0x16e4 +#define DEFAULT_SC_BOTTOM_RIGHT 0x16e8 +#define SC_TOP_LEFT 0x16ec +#define SC_BOTTOM_RIGHT 0x16f0 +#define SRC_SC_BOTTOM_RIGHT 0x16f4 +#define DST_TILE 0x1700 +#define WAIT_UNTIL 0x1720 +#define CACHE_CNTL 0x1724 +#define GUI_STAT 0x1740 +#define PC_GUI_MODE 0x1744 +#define PC_GUI_CTLSTAT 0x1748 +#define PC_DEBUG_MODE 0x1760 +#define BRES_DST_ERR_DEC 0x1780 +#define TRAIL_BRES_T12_ERR_DEC 0x1784 +#define TRAIL_BRES_T12_INC 0x1788 +#define DP_T12_CNTL 0x178c +#define DST_BRES_T1_LNTH 0x1790 +#define DST_BRES_T2_LNTH 0x1794 +#define SCALE_SRC_HEIGHT_WIDTH 0x1994 +#define SCALE_OFFSET_0 0x1998 +#define SCALE_PITCH 0x199c +#define SCALE_X_INC 0x19a0 +#define SCALE_Y_INC 0x19a4 +#define SCALE_HACC 0x19a8 +#define SCALE_VACC 0x19ac +#define SCALE_DST_X_Y 0x19b0 +#define SCALE_DST_HEIGHT_WIDTH 0x19b4 +#define SCALE_3D_CNTL 0x1a00 +#define SCALE_3D_DATATYPE 0x1a20 +#define SETUP_CNTL 0x1bc4 +#define SOLID_COLOR 0x1bc8 +#define WINDOW_XY_OFFSET 0x1bcc +#define DRAW_LINE_POINT 0x1bd0 +#define SETUP_CNTL_PM4 0x1bd4 +#define DST_PITCH_OFFSET_C 0x1c80 +#define DP_GUI_MASTER_CNTL_C 0x1c84 +#define SC_TOP_LEFT_C 0x1c88 +#define SC_BOTTOM_RIGHT_C 0x1c8c + +#define CLR_CMP_MASK_3D 0x1A28 +#define MISC_3D_STATE_CNTL_REG 0x1CA0 +#define MC_SRC1_CNTL 0x19D8 +#define TEX_CNTL 0x1800 + +/* CONSTANTS */ +#define GUI_ACTIVE 0x80000000 +#define ENGINE_IDLE 0x0 + +#define PLL_WR_EN 0x00000080 + +#define CLK_PIN_CNTL 0x01 +#define PPLL_CNTL 0x02 +#define PPLL_REF_DIV 0x03 +#define PPLL_DIV_0 0x04 +#define PPLL_DIV_1 0x05 +#define PPLL_DIV_2 0x06 +#define PPLL_DIV_3 0x07 +#define VCLK_ECP_CNTL 0x08 +#define HTOTAL_CNTL 0x09 +#define X_MPLL_REF_FB_DIV 0x0a +#define XPLL_CNTL 0x0b +#define XDLL_CNTL 0x0c +#define XCLK_CNTL 0x0d +#define MPLL_CNTL 0x0e +#define MCLK_CNTL 0x0f +#define AGP_PLL_CNTL 0x10 +#define FCP_CNTL 0x12 +#define PLL_TEST_CNTL 0x13 +#define P2PLL_CNTL 0x2a +#define P2PLL_REF_DIV 0x2b +#define P2PLL_DIV_0 0x2b +#define POWER_MANAGEMENT 0x2f + +#define PPLL_RESET 0x00000001 +#define PPLL_ATOMIC_UPDATE_EN 0x00010000 +#define PPLL_VGA_ATOMIC_UPDATE_EN 0x00020000 +#define PPLL_REF_DIV_MASK 0x000003FF +#define PPLL_FB3_DIV_MASK 0x000007FF +#define PPLL_POST3_DIV_MASK 0x00070000 +#define PPLL_ATOMIC_UPDATE_R 0x00008000 +#define PPLL_ATOMIC_UPDATE_W 0x00008000 +#define MEM_CFG_TYPE_MASK 0x00000003 +#define XCLK_SRC_SEL_MASK 0x00000007 +#define XPLL_FB_DIV_MASK 0x0000FF00 +#define X_MPLL_REF_DIV_MASK 0x000000FF + +/* Config control values (CONFIG_CNTL) */ +#define CFG_VGA_IO_DIS 0x00000400 + +/* CRTC control values (CRTC_GEN_CNTL) */ +#define CRTC_CSYNC_EN 0x00000010 + +#define CRTC2_DBL_SCAN_EN 0x00000001 +#define CRTC2_DISPLAY_DIS 0x00800000 +#define CRTC2_FIFO_EXTSENSE 0x00200000 +#define CRTC2_ICON_EN 0x00100000 +#define CRTC2_CUR_EN 0x00010000 +#define CRTC2_EXT_DISP_EN 0x01000000 +#define CRTC2_EN 0x02000000 +#define CRTC2_DISP_REQ_EN_B 0x04000000 + +#define CRTC_PIX_WIDTH_MASK 0x00000700 +#define CRTC_PIX_WIDTH_4BPP 0x00000100 +#define CRTC_PIX_WIDTH_8BPP 0x00000200 +#define CRTC_PIX_WIDTH_15BPP 0x00000300 +#define CRTC_PIX_WIDTH_16BPP 0x00000400 +#define CRTC_PIX_WIDTH_24BPP 0x00000500 +#define CRTC_PIX_WIDTH_32BPP 0x00000600 + +/* DAC_CNTL bit constants */ +#define DAC_8BIT_EN 0x00000100 +#define DAC_MASK 0xFF000000 +#define DAC_BLANKING 0x00000004 +#define DAC_RANGE_CNTL 0x00000003 +#define DAC_CLK_SEL 0x00000010 +#define DAC_PALETTE_ACCESS_CNTL 0x00000020 +#define DAC_PALETTE2_SNOOP_EN 0x00000040 +#define DAC_PDWN 0x00008000 + +/* CRTC_EXT_CNTL */ +#define CRT_CRTC_DISPLAY_DIS 0x00000400 +#define CRT_CRTC_ON 0x00008000 + +/* GEN_RESET_CNTL bit constants */ +#define SOFT_RESET_GUI 0x00000001 +#define SOFT_RESET_VCLK 0x00000100 +#define SOFT_RESET_PCLK 0x00000200 +#define SOFT_RESET_ECP 0x00000400 +#define SOFT_RESET_DISPENG_XCLK 0x00000800 + +/* PC_GUI_CTLSTAT bit constants */ +#define PC_BUSY_INIT 0x10000000 +#define PC_BUSY_GUI 0x20000000 +#define PC_BUSY_NGUI 0x40000000 +#define PC_BUSY 0x80000000 + +#define BUS_MASTER_DIS 0x00000040 +#define PM4_BUFFER_CNTL_NONPM4 0x00000000 + +/* DP_DATATYPE bit constants */ +#define DST_8BPP 0x00000002 +#define DST_15BPP 0x00000003 +#define DST_16BPP 0x00000004 +#define DST_24BPP 0x00000005 +#define DST_32BPP 0x00000006 + +#define BRUSH_SOLIDCOLOR 0x00000d00 + +/* DP_GUI_MASTER_CNTL bit constants */ +#define GMC_SRC_PITCH_OFFSET_DEFAULT 0x00000000 +#define GMC_DST_PITCH_OFFSET_DEFAULT 0x00000000 +#define GMC_SRC_CLIP_DEFAULT 0x00000000 +#define GMC_DST_CLIP_DEFAULT 0x00000000 +#define GMC_BRUSH_SOLIDCOLOR 0x000000d0 +#define GMC_SRC_DSTCOLOR 0x00003000 +#define GMC_BYTE_ORDER_MSB_TO_LSB 0x00000000 +#define GMC_DP_SRC_RECT 0x02000000 +#define GMC_3D_FCN_EN_CLR 0x00000000 +#define GMC_AUX_CLIP_CLEAR 0x20000000 +#define GMC_DST_CLR_CMP_FCN_CLEAR 0x10000000 +#define GMC_WRITE_MASK_SET 0x40000000 +#define GMC_DP_CONVERSION_TEMP_6500 0x00000000 + +/* DP_GUI_MASTER_CNTL ROP3 named constants */ +#define GMC_ROP3_MASK 0x00ff0000 +#define ROP3_BLACKNESS 0x00000000 +#define ROP3_SRCCOPY 0x00cc0000 +#define ROP3_PATCOPY 0x00f00000 +#define ROP3_WHITENESS 0x00ff0000 + +#define SRC_DSTCOLOR 0x00030000 + +/* DP_CNTL bit constants */ +#define DST_X_RIGHT_TO_LEFT 0x00000000 +#define DST_X_LEFT_TO_RIGHT 0x00000001 +#define DST_Y_BOTTOM_TO_TOP 0x00000000 +#define DST_Y_TOP_TO_BOTTOM 0x00000002 +#define DST_X_MAJOR 0x00000000 +#define DST_Y_MAJOR 0x00000004 +#define DST_X_TILE 0x00000008 +#define DST_Y_TILE 0x00000010 +#define DST_LAST_PEL 0x00000020 +#define DST_TRAIL_X_RIGHT_TO_LEFT 0x00000000 +#define DST_TRAIL_X_LEFT_TO_RIGHT 0x00000040 +#define DST_TRAP_FILL_RIGHT_TO_LEFT 0x00000000 +#define DST_TRAP_FILL_LEFT_TO_RIGHT 0x00000080 +#define DST_BRES_SIGN 0x00000100 +#define DST_HOST_BIG_ENDIAN_EN 0x00000200 +#define DST_POLYLINE_NONLAST 0x00008000 +#define DST_RASTER_STALL 0x00010000 +#define DST_POLY_EDGE 0x00040000 + +/* DP_MIX bit constants */ +#define DP_SRC_RECT 0x00000200 +#define DP_SRC_HOST 0x00000300 +#define DP_SRC_HOST_BYTEALIGN 0x00000400 + +/* LVDS_GEN_CNTL constants */ +#define LVDS_BL_MOD_LEVEL_MASK 0x0000ff00 +#define LVDS_BL_MOD_LEVEL_SHIFT 8 +#define LVDS_BL_MOD_EN 0x00010000 +#define LVDS_DIGION 0x00040000 +#define LVDS_BLON 0x00080000 +#define LVDS_ON 0x00000001 +#define LVDS_DISPLAY_DIS 0x00000002 +#define LVDS_PANEL_TYPE_2PIX_PER_CLK 0x00000004 +#define LVDS_PANEL_24BITS_TFT 0x00000008 +#define LVDS_FRAME_MOD_NO 0x00000000 +#define LVDS_FRAME_MOD_2_LEVELS 0x00000010 +#define LVDS_FRAME_MOD_4_LEVELS 0x00000020 +#define LVDS_RST_FM 0x00000040 +#define LVDS_EN 0x00000080 + +/* CRTC2_GEN_CNTL constants */ +#define CRTC2_EN 0x02000000 + +/* POWER_MANAGEMENT constants */ +#define PWR_MGT_ON 0x00000001 +#define PWR_MGT_MODE_MASK 0x00000006 +#define PWR_MGT_MODE_PIN 0x00000000 +#define PWR_MGT_MODE_REGISTER 0x00000002 +#define PWR_MGT_MODE_TIMER 0x00000004 +#define PWR_MGT_MODE_PCI 0x00000006 +#define PWR_MGT_AUTO_PWR_UP_EN 0x00000008 +#define PWR_MGT_ACTIVITY_PIN_ON 0x00000010 +#define PWR_MGT_STANDBY_POL 0x00000020 +#define PWR_MGT_SUSPEND_POL 0x00000040 +#define PWR_MGT_SELF_REFRESH 0x00000080 +#define PWR_MGT_ACTIVITY_PIN_EN 0x00000100 +#define PWR_MGT_KEYBD_SNOOP 0x00000200 +#define PWR_MGT_TRISTATE_MEM_EN 0x00000800 +#define PWR_MGT_SELW4MS 0x00001000 +#define PWR_MGT_SLOWDOWN_MCLK 0x00002000 + +#define PMI_PMSCR_REG 0x60 + +/* used by ATI bug fix for hardware ROM */ +#define RAGE128_MPP_TB_CONFIG 0x01c0 + +#endif /* ATI_REGS_H */ diff --git a/hw/display/ati.c b/hw/display/ati.c new file mode 100644 index 000000000000..8322f52affca --- /dev/null +++ b/hw/display/ati.c @@ -0,0 +1,865 @@ +/* + * QEMU ATI SVGA emulation + * + * Copyright (c) 2019 BALATON Zoltan + * + * This work is licensed under the GNU GPL license version 2 or later. + */ + +/* + * WARNING: + * This is very incomplete and only enough for Linux console and some + * unaccelerated X output at the moment. + * Currently it's little more than a frame buffer with minimal functions, + * other more advanced features of the hardware are yet to be implemented. + * We only aim for Rage 128 Pro (and some RV100) and 2D only at first, + * No 3D at all yet (maybe after 2D works, but feel free to improve it) + */ + +#include "ati_int.h" +#include "ati_regs.h" +#include "vga_regs.h" +#include "qemu/log.h" +#include "qemu/error-report.h" +#include "qapi/error.h" +#include "hw/hw.h" +#include "ui/console.h" +#include "trace.h" + +#define ATI_DEBUG_HW_CURSOR 0 + +static const struct { + const char *name; + uint16_t dev_id; +} ati_model_aliases[] = { + { "rage128p", PCI_DEVICE_ID_ATI_RAGE128_PF }, + { "rv100", PCI_DEVICE_ID_ATI_RADEON_QY }, +}; + +enum { VGA_MODE, EXT_MODE }; + +static void ati_vga_switch_mode(ATIVGAState *s) +{ + DPRINTF("%d -> %d\n", + s->mode, !!(s->regs.crtc_gen_cntl & CRTC2_EXT_DISP_EN)); + if (s->regs.crtc_gen_cntl & CRTC2_EXT_DISP_EN) { + /* Extended mode enabled */ + s->mode = EXT_MODE; + if (s->regs.crtc_gen_cntl & CRTC2_EN) { + /* CRT controller enabled, use CRTC values */ + uint32_t offs = s->regs.crtc_offset & 0x07ffffff; + int stride = (s->regs.crtc_pitch & 0x7ff) * 8; + int bpp = 0; + int h, v; + + if (s->regs.crtc_h_total_disp == 0) { + s->regs.crtc_h_total_disp = ((640 / 8) - 1) << 16; + } + if (s->regs.crtc_v_total_disp == 0) { + s->regs.crtc_v_total_disp = (480 - 1) << 16; + } + h = ((s->regs.crtc_h_total_disp >> 16) + 1) * 8; + v = (s->regs.crtc_v_total_disp >> 16) + 1; + switch (s->regs.crtc_gen_cntl & CRTC_PIX_WIDTH_MASK) { + case CRTC_PIX_WIDTH_4BPP: + bpp = 4; + break; + case CRTC_PIX_WIDTH_8BPP: + bpp = 8; + break; + case CRTC_PIX_WIDTH_15BPP: + bpp = 15; + break; + case CRTC_PIX_WIDTH_16BPP: + bpp = 16; + break; + case CRTC_PIX_WIDTH_24BPP: + bpp = 24; + break; + case CRTC_PIX_WIDTH_32BPP: + bpp = 32; + break; + default: + qemu_log_mask(LOG_UNIMP, "Unsupported bpp value\n"); + } + assert(bpp != 0); + DPRINTF("Switching to %dx%d %d %d @ %x\n", h, v, stride, bpp, offs); + vbe_ioport_write_index(&s->vga, 0, VBE_DISPI_INDEX_ENABLE); + vbe_ioport_write_data(&s->vga, 0, VBE_DISPI_DISABLED); + /* reset VBE regs then set up mode */ + s->vga.vbe_regs[VBE_DISPI_INDEX_XRES] = h; + s->vga.vbe_regs[VBE_DISPI_INDEX_YRES] = v; + s->vga.vbe_regs[VBE_DISPI_INDEX_BPP] = bpp; + /* enable mode via ioport so it updates vga regs */ + vbe_ioport_write_index(&s->vga, 0, VBE_DISPI_INDEX_ENABLE); + vbe_ioport_write_data(&s->vga, 0, VBE_DISPI_ENABLED | + VBE_DISPI_LFB_ENABLED | VBE_DISPI_NOCLEARMEM | + (s->regs.dac_cntl & DAC_8BIT_EN ? VBE_DISPI_8BIT_DAC : 0)); + /* now set offset and stride after enable as that resets these */ + if (stride) { + vbe_ioport_write_index(&s->vga, 0, VBE_DISPI_INDEX_VIRT_WIDTH); + vbe_ioport_write_data(&s->vga, 0, stride); + if (offs % stride == 0) { + vbe_ioport_write_index(&s->vga, 0, VBE_DISPI_INDEX_Y_OFFSET); + vbe_ioport_write_data(&s->vga, 0, offs / stride); + } else { + /* FIXME what to do with this? */ + error_report("VGA offset is not multiple of pitch, " + "expect bad picture"); + } + } + } + } else { + /* VGA mode enabled */ + s->mode = VGA_MODE; + vbe_ioport_write_index(&s->vga, 0, VBE_DISPI_INDEX_ENABLE); + vbe_ioport_write_data(&s->vga, 0, VBE_DISPI_DISABLED); + } +} + +/* Used by host side hardware cursor */ +static void ati_cursor_define(ATIVGAState *s) +{ + uint8_t data[1024]; + uint8_t *src; + int i, j, idx = 0; + + if ((s->regs.cur_offset & BIT(31)) || s->cursor_guest_mode) { + return; /* Do not update cursor if locked or rendered by guest */ + } + /* FIXME handle cur_hv_offs correctly */ + src = s->vga.vram_ptr + (s->regs.crtc_offset & 0x07ffffff) + + s->regs.cur_offset - (s->regs.cur_hv_offs >> 16) - + (s->regs.cur_hv_offs & 0xffff) * 16; + for (i = 0; i < 64; i++) { + for (j = 0; j < 8; j++, idx++) { + data[idx] = src[i * 16 + j]; + data[512 + idx] = src[i * 16 + j + 8]; + } + } + if (!s->cursor) { + s->cursor = cursor_alloc(64, 64); + } + cursor_set_mono(s->cursor, s->regs.cur_color1, s->regs.cur_color0, + &data[512], 1, &data[0]); + dpy_cursor_define(s->vga.con, s->cursor); +} + +/* Alternatively support guest rendered hardware cursor */ +static void ati_cursor_invalidate(VGACommonState *vga) +{ + ATIVGAState *s = container_of(vga, ATIVGAState, vga); + int size = (s->regs.crtc_gen_cntl & CRTC2_CUR_EN) ? 64 : 0; + + if (s->regs.cur_offset & BIT(31)) { + return; /* Do not update cursor if locked */ + } + if (s->cursor_size != size || + vga->hw_cursor_x != s->regs.cur_hv_pos >> 16 || + vga->hw_cursor_y != (s->regs.cur_hv_pos & 0xffff) || + s->cursor_offset != s->regs.cur_offset - (s->regs.cur_hv_offs >> 16) - + (s->regs.cur_hv_offs & 0xffff) * 16) { + /* Remove old cursor then update and show new one if needed */ + vga_invalidate_scanlines(vga, vga->hw_cursor_y, vga->hw_cursor_y + 63); + vga->hw_cursor_x = s->regs.cur_hv_pos >> 16; + vga->hw_cursor_y = s->regs.cur_hv_pos & 0xffff; + s->cursor_offset = s->regs.cur_offset - (s->regs.cur_hv_offs >> 16) - + (s->regs.cur_hv_offs & 0xffff) * 16; + s->cursor_size = size; + if (size) { + vga_invalidate_scanlines(vga, + vga->hw_cursor_y, vga->hw_cursor_y + 63); + } + } +} + +static void ati_cursor_draw_line(VGACommonState *vga, uint8_t *d, int scr_y) +{ + ATIVGAState *s = container_of(vga, ATIVGAState, vga); + uint8_t *src; + uint32_t *dp = (uint32_t *)d; + int i, j, h; + + if (!(s->regs.crtc_gen_cntl & CRTC2_CUR_EN) || + scr_y < vga->hw_cursor_y || scr_y >= vga->hw_cursor_y + 64 || + scr_y > s->regs.crtc_v_total_disp >> 16) { + return; + } + /* FIXME handle cur_hv_offs correctly */ + src = s->vga.vram_ptr + (s->regs.crtc_offset & 0x07ffffff) + + s->cursor_offset + (scr_y - vga->hw_cursor_y) * 16; + dp = &dp[vga->hw_cursor_x]; + h = ((s->regs.crtc_h_total_disp >> 16) + 1) * 8; + for (i = 0; i < 8; i++) { + uint32_t color; + uint8_t abits = src[i]; + uint8_t xbits = src[i + 8]; + for (j = 0; j < 8; j++, abits <<= 1, xbits <<= 1) { + if (abits & BIT(7)) { + if (xbits & BIT(7)) { + color = dp[i * 8 + j] ^ 0xffffffff; /* complement */ + } else { + continue; /* transparent, no change */ + } + } else { + color = (xbits & BIT(7) ? s->regs.cur_color1 : + s->regs.cur_color0) << 8 | 0xff; + } + if (vga->hw_cursor_x + i * 8 + j >= h) { + return; /* end of screen, don't span to next line */ + } + dp[i * 8 + j] = color; + } + } +} + +static inline uint64_t ati_reg_read_offs(uint32_t reg, int offs, + unsigned int size) +{ + if (offs == 0 && size == 4) { + return reg; + } else { + return extract32(reg, offs * BITS_PER_BYTE, size * BITS_PER_BYTE); + } +} + +static uint64_t ati_mm_read(void *opaque, hwaddr addr, unsigned int size) +{ + ATIVGAState *s = opaque; + uint64_t val = 0; + + switch (addr) { + case MM_INDEX: + val = s->regs.mm_index; + break; + case MM_DATA ... MM_DATA + 3: + /* indexed access to regs or memory */ + if (s->regs.mm_index & BIT(31)) { + if (s->regs.mm_index <= s->vga.vram_size - size) { + int i = size - 1; + while (i >= 0) { + val <<= 8; + val |= s->vga.vram_ptr[s->regs.mm_index + i--]; + } + } + } else { + val = ati_mm_read(s, s->regs.mm_index + addr - MM_DATA, size); + } + break; + case BIOS_0_SCRATCH ... BUS_CNTL - 1: + { + int i = (addr - BIOS_0_SCRATCH) / 4; + if (s->dev_id == PCI_DEVICE_ID_ATI_RAGE128_PF && i > 3) { + break; + } + val = ati_reg_read_offs(s->regs.bios_scratch[i], + addr - (BIOS_0_SCRATCH + i * 4), size); + break; + } + case CRTC_GEN_CNTL ... CRTC_GEN_CNTL + 3: + val = ati_reg_read_offs(s->regs.crtc_gen_cntl, + addr - CRTC_GEN_CNTL, size); + break; + case CRTC_EXT_CNTL ... CRTC_EXT_CNTL + 3: + val = ati_reg_read_offs(s->regs.crtc_ext_cntl, + addr - CRTC_EXT_CNTL, size); + break; + case DAC_CNTL: + val = s->regs.dac_cntl; + break; +/* case GPIO_MONID: FIXME hook up DDC I2C here */ + case PALETTE_INDEX: + /* FIXME unaligned access */ + val = vga_ioport_read(&s->vga, VGA_PEL_IR) << 16; + val |= vga_ioport_read(&s->vga, VGA_PEL_IW) & 0xff; + break; + case PALETTE_DATA: + val = vga_ioport_read(&s->vga, VGA_PEL_D); + break; + case CNFG_MEMSIZE: + val = s->vga.vram_size; + break; + case MC_STATUS: + val = 5; + break; + case RBBM_STATUS: + case GUI_STAT: + val = 64; /* free CMDFIFO entries */ + break; + case CRTC_H_TOTAL_DISP: + val = s->regs.crtc_h_total_disp; + break; + case CRTC_H_SYNC_STRT_WID: + val = s->regs.crtc_h_sync_strt_wid; + break; + case CRTC_V_TOTAL_DISP: + val = s->regs.crtc_v_total_disp; + break; + case CRTC_V_SYNC_STRT_WID: + val = s->regs.crtc_v_sync_strt_wid; + break; + case CRTC_OFFSET: + val = s->regs.crtc_offset; + break; + case CRTC_OFFSET_CNTL: + val = s->regs.crtc_offset_cntl; + break; + case CRTC_PITCH: + val = s->regs.crtc_pitch; + break; + case 0xf00 ... 0xfff: + val = pci_default_read_config(&s->dev, addr - 0xf00, size); + break; + case CUR_OFFSET: + val = s->regs.cur_offset; + break; + case CUR_HORZ_VERT_POSN: + val = s->regs.cur_hv_pos; + val |= s->regs.cur_offset & BIT(31); + break; + case CUR_HORZ_VERT_OFF: + val = s->regs.cur_hv_offs; + val |= s->regs.cur_offset & BIT(31); + break; + case CUR_CLR0: + val = s->regs.cur_color0; + break; + case CUR_CLR1: + val = s->regs.cur_color1; + break; + case DST_OFFSET: + val = s->regs.dst_offset; + break; + case DST_PITCH: + val = s->regs.dst_pitch; + if (s->dev_id == PCI_DEVICE_ID_ATI_RAGE128_PF) { + val &= s->regs.dst_tile << 16; + } + break; + case DST_WIDTH: + val = s->regs.dst_width; + break; + case DST_HEIGHT: + val = s->regs.dst_height; + break; + case SRC_X: + val = s->regs.src_x; + break; + case SRC_Y: + val = s->regs.src_y; + break; + case DST_X: + val = s->regs.dst_x; + break; + case DST_Y: + val = s->regs.dst_y; + break; + case DP_GUI_MASTER_CNTL: + val = s->regs.dp_gui_master_cntl; + break; + case SRC_OFFSET: + val = s->regs.src_offset; + break; + case SRC_PITCH: + val = s->regs.src_pitch; + if (s->dev_id == PCI_DEVICE_ID_ATI_RAGE128_PF) { + val &= s->regs.src_tile << 16; + } + break; + case DP_BRUSH_BKGD_CLR: + val = s->regs.dp_brush_bkgd_clr; + break; + case DP_BRUSH_FRGD_CLR: + val = s->regs.dp_brush_frgd_clr; + break; + case DP_SRC_FRGD_CLR: + val = s->regs.dp_src_frgd_clr; + break; + case DP_SRC_BKGD_CLR: + val = s->regs.dp_src_bkgd_clr; + break; + case DP_CNTL: + val = s->regs.dp_cntl; + break; + case DP_DATATYPE: + val = s->regs.dp_datatype; + break; + case DP_MIX: + val = s->regs.dp_mix; + break; + case DP_WRITE_MASK: + val = s->regs.dp_write_mask; + break; + case DEFAULT_OFFSET: + val = s->regs.default_offset; + break; + case DEFAULT_PITCH: + val = s->regs.default_pitch; + break; + case DEFAULT_SC_BOTTOM_RIGHT: + val = s->regs.default_sc_bottom_right; + break; + default: + break; + } + if (addr < CUR_OFFSET || addr > CUR_CLR1 || ATI_DEBUG_HW_CURSOR) { + trace_ati_mm_read(size, addr, ati_reg_name(addr & ~3ULL), val); + } + return val; +} + +static inline void ati_reg_write_offs(uint32_t *reg, int offs, + uint64_t data, unsigned int size) +{ + if (offs == 0 && size == 4) { + *reg = data; + } else { + *reg = deposit32(*reg, offs * BITS_PER_BYTE, size * BITS_PER_BYTE, + data); + } +} + +static void ati_mm_write(void *opaque, hwaddr addr, + uint64_t data, unsigned int size) +{ + ATIVGAState *s = opaque; + + if (addr < CUR_OFFSET || addr > CUR_CLR1 || ATI_DEBUG_HW_CURSOR) { + trace_ati_mm_write(size, addr, ati_reg_name(addr & ~3ULL), data); + } + switch (addr) { + case MM_INDEX: + s->regs.mm_index = data; + break; + case MM_DATA ... MM_DATA + 3: + /* indexed access to regs or memory */ + if (s->regs.mm_index & BIT(31)) { + if (s->regs.mm_index <= s->vga.vram_size - size) { + int i = 0; + while (i < size) { + s->vga.vram_ptr[s->regs.mm_index + i] = data & 0xff; + data >>= 8; + } + } + } else { + ati_mm_write(s, s->regs.mm_index + addr - MM_DATA, data, size); + } + break; + case BIOS_0_SCRATCH ... BUS_CNTL - 1: + { + int i = (addr - BIOS_0_SCRATCH) / 4; + if (s->dev_id == PCI_DEVICE_ID_ATI_RAGE128_PF && i > 3) { + break; + } + ati_reg_write_offs(&s->regs.bios_scratch[i], + addr - (BIOS_0_SCRATCH + i * 4), data, size); + break; + } + case CRTC_GEN_CNTL ... CRTC_GEN_CNTL + 3: + { + uint32_t val = s->regs.crtc_gen_cntl; + ati_reg_write_offs(&s->regs.crtc_gen_cntl, + addr - CRTC_GEN_CNTL, data, size); + if ((val & CRTC2_CUR_EN) != (s->regs.crtc_gen_cntl & CRTC2_CUR_EN)) { + if (s->cursor_guest_mode) { + s->vga.force_shadow = !!(s->regs.crtc_gen_cntl & CRTC2_CUR_EN); + } else { + if (s->regs.crtc_gen_cntl & CRTC2_CUR_EN) { + ati_cursor_define(s); + } + dpy_mouse_set(s->vga.con, s->regs.cur_hv_pos >> 16, + s->regs.cur_hv_pos & 0xffff, + (s->regs.crtc_gen_cntl & CRTC2_CUR_EN) != 0); + } + } + if ((val & (CRTC2_EXT_DISP_EN | CRTC2_EN)) != + (s->regs.crtc_gen_cntl & (CRTC2_EXT_DISP_EN | CRTC2_EN))) { + ati_vga_switch_mode(s); + } + break; + } + case CRTC_EXT_CNTL ... CRTC_EXT_CNTL + 3: + { + uint32_t val = s->regs.crtc_ext_cntl; + ati_reg_write_offs(&s->regs.crtc_ext_cntl, + addr - CRTC_EXT_CNTL, data, size); + if (s->regs.crtc_ext_cntl & CRT_CRTC_DISPLAY_DIS) { + DPRINTF("Display disabled\n"); + s->vga.ar_index &= ~BIT(5); + } else { + DPRINTF("Display enabled\n"); + s->vga.ar_index |= BIT(5); + ati_vga_switch_mode(s); + } + if ((val & CRT_CRTC_DISPLAY_DIS) != + (s->regs.crtc_ext_cntl & CRT_CRTC_DISPLAY_DIS)) { + ati_vga_switch_mode(s); + } + break; + } + case DAC_CNTL: + s->regs.dac_cntl = data & 0xffffe3ff; + s->vga.dac_8bit = !!(data & DAC_8BIT_EN); + break; +/* case GPIO_MONID: FIXME hook up DDC I2C here */ + case PALETTE_INDEX ... PALETTE_INDEX + 3: + if (size == 4) { + vga_ioport_write(&s->vga, VGA_PEL_IR, (data >> 16) & 0xff); + vga_ioport_write(&s->vga, VGA_PEL_IW, data & 0xff); + } else { + if (addr == PALETTE_INDEX) { + vga_ioport_write(&s->vga, VGA_PEL_IW, data & 0xff); + } else { + vga_ioport_write(&s->vga, VGA_PEL_IR, data & 0xff); + } + } + break; + case PALETTE_DATA ... PALETTE_DATA + 3: + data <<= addr - PALETTE_DATA; + data = bswap32(data) >> 8; + vga_ioport_write(&s->vga, VGA_PEL_D, data & 0xff); + data >>= 8; + vga_ioport_write(&s->vga, VGA_PEL_D, data & 0xff); + data >>= 8; + vga_ioport_write(&s->vga, VGA_PEL_D, data & 0xff); + break; + case CRTC_H_TOTAL_DISP: + s->regs.crtc_h_total_disp = data & 0x07ff07ff; + break; + case CRTC_H_SYNC_STRT_WID: + s->regs.crtc_h_sync_strt_wid = data & 0x17bf1fff; + break; + case CRTC_V_TOTAL_DISP: + s->regs.crtc_v_total_disp = data & 0x0fff0fff; + break; + case CRTC_V_SYNC_STRT_WID: + s->regs.crtc_v_sync_strt_wid = data & 0x9f0fff; + break; + case CRTC_OFFSET: + s->regs.crtc_offset = data & 0xc7ffffff; + break; + case CRTC_OFFSET_CNTL: + s->regs.crtc_offset_cntl = data; /* FIXME */ + break; + case CRTC_PITCH: + s->regs.crtc_pitch = data & 0x07ff07ff; + break; + case 0xf00 ... 0xfff: + /* read-only copy of PCI config space so ignore writes */ + break; + case CUR_OFFSET: + if (s->regs.cur_offset != (data & 0x87fffff0)) { + s->regs.cur_offset = data & 0x87fffff0; + ati_cursor_define(s); + } + break; + case CUR_HORZ_VERT_POSN: + s->regs.cur_hv_pos = data & 0x3fff0fff; + if (data & BIT(31)) { + s->regs.cur_offset |= data & BIT(31); + } else if (s->regs.cur_offset & BIT(31)) { + s->regs.cur_offset &= ~BIT(31); + ati_cursor_define(s); + } + if (!s->cursor_guest_mode && + (s->regs.crtc_gen_cntl & CRTC2_CUR_EN) && !(data & BIT(31))) { + dpy_mouse_set(s->vga.con, s->regs.cur_hv_pos >> 16, + s->regs.cur_hv_pos & 0xffff, 1); + } + break; + case CUR_HORZ_VERT_OFF: + s->regs.cur_hv_offs = data & 0x3f003f; + if (data & BIT(31)) { + s->regs.cur_offset |= data & BIT(31); + } else if (s->regs.cur_offset & BIT(31)) { + s->regs.cur_offset &= ~BIT(31); + ati_cursor_define(s); + } + break; + case CUR_CLR0: + if (s->regs.cur_color0 != (data & 0xffffff)) { + s->regs.cur_color0 = data & 0xffffff; + ati_cursor_define(s); + } + break; + case CUR_CLR1: + /* + * Update cursor unconditionally here because some clients set up + * other registers before actually writing cursor data to memory at + * offset so we would miss cursor change unless always updating here + */ + s->regs.cur_color1 = data & 0xffffff; + ati_cursor_define(s); + break; + case DST_OFFSET: + if (s->dev_id == PCI_DEVICE_ID_ATI_RAGE128_PF) { + s->regs.dst_offset = data & 0xfffffff0; + } else { + s->regs.dst_offset = data & 0xfffffc00; + } + break; + case DST_PITCH: + if (s->dev_id == PCI_DEVICE_ID_ATI_RAGE128_PF) { + s->regs.dst_pitch = data & 0x3fff; + s->regs.dst_tile = (data >> 16) & 1; + } else { + s->regs.dst_pitch = data & 0x3ff0; + } + break; + case DST_TILE: + if (s->dev_id == PCI_DEVICE_ID_ATI_RADEON_QY) { + s->regs.dst_tile = data & 3; + } + break; + case DST_WIDTH: + s->regs.dst_width = data & 0x3fff; + ati_2d_blt(s); + break; + case DST_HEIGHT: + s->regs.dst_height = data & 0x3fff; + break; + case SRC_X: + s->regs.src_x = data & 0x3fff; + break; + case SRC_Y: + s->regs.src_y = data & 0x3fff; + break; + case DST_X: + s->regs.dst_x = data & 0x3fff; + break; + case DST_Y: + s->regs.dst_y = data & 0x3fff; + break; + case SRC_PITCH_OFFSET: + if (s->dev_id == PCI_DEVICE_ID_ATI_RAGE128_PF) { + s->regs.src_offset = (data & 0x1fffff) << 5; + s->regs.src_pitch = (data >> 21) & 0x3ff; + s->regs.src_tile = data >> 31; + } else { + s->regs.src_offset = (data & 0x3fffff) << 11; + s->regs.src_pitch = (data & 0x3fc00000) >> 16; + s->regs.src_tile = (data >> 30) & 1; + } + break; + case DST_PITCH_OFFSET: + if (s->dev_id == PCI_DEVICE_ID_ATI_RAGE128_PF) { + s->regs.dst_offset = (data & 0x1fffff) << 5; + s->regs.dst_pitch = (data >> 21) & 0x3ff; + s->regs.dst_tile = data >> 31; + } else { + s->regs.dst_offset = (data & 0x3fffff) << 11; + s->regs.dst_pitch = (data & 0x3fc00000) >> 16; + s->regs.dst_tile = data >> 30; + } + break; + case SRC_Y_X: + s->regs.src_x = data & 0x3fff; + s->regs.src_y = (data >> 16) & 0x3fff; + break; + case DST_Y_X: + s->regs.dst_x = data & 0x3fff; + s->regs.dst_y = (data >> 16) & 0x3fff; + break; + case DST_HEIGHT_WIDTH: + s->regs.dst_width = data & 0x3fff; + s->regs.dst_height = (data >> 16) & 0x3fff; + ati_2d_blt(s); + break; + case DP_GUI_MASTER_CNTL: + s->regs.dp_gui_master_cntl = data & 0xf800000f; + s->regs.dp_datatype = (data & 0x0f00) >> 8 | (data & 0x30f0) << 4 | + (data & 0x4000) << 16; + s->regs.dp_mix = (data & GMC_ROP3_MASK) | (data & 0x7000000) >> 16; + break; + case DST_WIDTH_X: + s->regs.dst_x = data & 0x3fff; + s->regs.dst_width = (data >> 16) & 0x3fff; + ati_2d_blt(s); + break; + case SRC_X_Y: + s->regs.src_y = data & 0x3fff; + s->regs.src_x = (data >> 16) & 0x3fff; + break; + case DST_X_Y: + s->regs.dst_y = data & 0x3fff; + s->regs.dst_x = (data >> 16) & 0x3fff; + break; + case DST_WIDTH_HEIGHT: + s->regs.dst_height = data & 0x3fff; + s->regs.dst_width = (data >> 16) & 0x3fff; + ati_2d_blt(s); + break; + case DST_HEIGHT_Y: + s->regs.dst_y = data & 0x3fff; + s->regs.dst_height = (data >> 16) & 0x3fff; + break; + case SRC_OFFSET: + if (s->dev_id == PCI_DEVICE_ID_ATI_RAGE128_PF) { + s->regs.src_offset = data & 0xfffffff0; + } else { + s->regs.src_offset = data & 0xfffffc00; + } + break; + case SRC_PITCH: + if (s->dev_id == PCI_DEVICE_ID_ATI_RAGE128_PF) { + s->regs.src_pitch = data & 0x3fff; + s->regs.src_tile = (data >> 16) & 1; + } else { + s->regs.src_pitch = data & 0x3ff0; + } + break; + case DP_BRUSH_BKGD_CLR: + s->regs.dp_brush_bkgd_clr = data; + break; + case DP_BRUSH_FRGD_CLR: + s->regs.dp_brush_frgd_clr = data; + break; + case DP_CNTL: + s->regs.dp_cntl = data; + break; + case DP_DATATYPE: + s->regs.dp_datatype = data & 0xe0070f0f; + break; + case DP_MIX: + s->regs.dp_mix = data & 0x00ff0700; + break; + case DP_WRITE_MASK: + s->regs.dp_write_mask = data; + break; + case DEFAULT_OFFSET: + data &= (s->dev_id == PCI_DEVICE_ID_ATI_RAGE128_PF ? + 0x03fffc00 : 0xfffffc00); + s->regs.default_offset = data; + break; + case DEFAULT_PITCH: + if (s->dev_id == PCI_DEVICE_ID_ATI_RAGE128_PF) { + s->regs.default_pitch = data & 0x103ff; + } + break; + case DEFAULT_SC_BOTTOM_RIGHT: + s->regs.default_sc_bottom_right = data & 0x3fff3fff; + break; + default: + break; + } +} + +static const MemoryRegionOps ati_mm_ops = { + .read = ati_mm_read, + .write = ati_mm_write, + .endianness = DEVICE_LITTLE_ENDIAN, +}; + +static void ati_vga_realize(PCIDevice *dev, Error **errp) +{ + ATIVGAState *s = ATI_VGA(dev); + VGACommonState *vga = &s->vga; + + if (s->model) { + int i; + for (i = 0; i < ARRAY_SIZE(ati_model_aliases); i++) { + if (!strcmp(s->model, ati_model_aliases[i].name)) { + s->dev_id = ati_model_aliases[i].dev_id; + break; + } + } + if (i >= ARRAY_SIZE(ati_model_aliases)) { + warn_report("Unknown ATI VGA model name, " + "using default rage128p"); + } + } + if (s->dev_id != PCI_DEVICE_ID_ATI_RAGE128_PF && + s->dev_id != PCI_DEVICE_ID_ATI_RADEON_QY) { + error_setg(errp, "Unknown ATI VGA device id, " + "only 0x5046 and 0x5159 are supported"); + return; + } + pci_set_word(dev->config + PCI_DEVICE_ID, s->dev_id); + + if (s->dev_id == PCI_DEVICE_ID_ATI_RADEON_QY && + s->vga.vram_size_mb < 16) { + warn_report("Too small video memory for device id"); + s->vga.vram_size_mb = 16; + } + + /* init vga bits */ + vga_common_init(vga, OBJECT(s)); + vga_init(vga, OBJECT(s), pci_address_space(dev), + pci_address_space_io(dev), true); + vga->con = graphic_console_init(DEVICE(s), 0, s->vga.hw_ops, &s->vga); + if (s->cursor_guest_mode) { + vga->cursor_invalidate = ati_cursor_invalidate; + vga->cursor_draw_line = ati_cursor_draw_line; + } + + /* mmio register space */ + memory_region_init_io(&s->mm, OBJECT(s), &ati_mm_ops, s, + "ati.mmregs", 0x4000); + /* io space is alias to beginning of mmregs */ + memory_region_init_alias(&s->io, OBJECT(s), "ati.io", &s->mm, 0, 0x100); + + pci_register_bar(dev, 0, PCI_BASE_ADDRESS_MEM_PREFETCH, &vga->vram); + pci_register_bar(dev, 1, PCI_BASE_ADDRESS_SPACE_IO, &s->io); + pci_register_bar(dev, 2, PCI_BASE_ADDRESS_SPACE_MEMORY, &s->mm); +} + +static void ati_vga_reset(DeviceState *dev) +{ + ATIVGAState *s = ATI_VGA(dev); + + /* reset vga */ + vga_common_reset(&s->vga); + s->mode = VGA_MODE; +} + +static void ati_vga_exit(PCIDevice *dev) +{ + ATIVGAState *s = ATI_VGA(dev); + + graphic_console_close(s->vga.con); +} + +static Property ati_vga_properties[] = { + DEFINE_PROP_UINT32("vgamem_mb", ATIVGAState, vga.vram_size_mb, 16), + DEFINE_PROP_STRING("model", ATIVGAState, model), + DEFINE_PROP_UINT16("x-device-id", ATIVGAState, dev_id, + PCI_DEVICE_ID_ATI_RAGE128_PF), + DEFINE_PROP_BOOL("guest_hwcursor", ATIVGAState, cursor_guest_mode, false), + DEFINE_PROP_END_OF_LIST() +}; + +static void ati_vga_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + PCIDeviceClass *k = PCI_DEVICE_CLASS(klass); + + dc->reset = ati_vga_reset; + dc->props = ati_vga_properties; + dc->hotpluggable = false; + set_bit(DEVICE_CATEGORY_DISPLAY, dc->categories); + + k->class_id = PCI_CLASS_DISPLAY_VGA; + k->vendor_id = PCI_VENDOR_ID_ATI; + k->device_id = PCI_DEVICE_ID_ATI_RAGE128_PF; + k->romfile = "vgabios-stdvga.bin"; + k->realize = ati_vga_realize; + k->exit = ati_vga_exit; +} + +static const TypeInfo ati_vga_info = { + .name = TYPE_ATI_VGA, + .parent = TYPE_PCI_DEVICE, + .instance_size = sizeof(ATIVGAState), + .class_init = ati_vga_class_init, + .interfaces = (InterfaceInfo[]) { + { INTERFACE_CONVENTIONAL_PCI_DEVICE }, + { }, + }, +}; + +static void ati_vga_register_types(void) +{ + type_register_static(&ati_vga_info); +} + +type_init(ati_vga_register_types) diff --git a/hw/display/ati_2d.c b/hw/display/ati_2d.c new file mode 100644 index 000000000000..bc98ba6eebf6 --- /dev/null +++ b/hw/display/ati_2d.c @@ -0,0 +1,167 @@ +/* + * QEMU ATI SVGA emulation + * 2D engine functions + * + * Copyright (c) 2019 BALATON Zoltan + * + * This work is licensed under the GNU GPL license version 2 or later. + */ + +#include "ati_int.h" +#include "ati_regs.h" +#include "qemu/log.h" +#include "ui/pixel_ops.h" + +/* + * NOTE: + * This is 2D _acceleration_ and supposed to be fast. Therefore, don't try to + * reinvent the wheel (unlikely to get better with a naive implementation than + * existing libraries) and avoid (poorly) reimplementing gfx primitives. + * That is unnecessary and would become a performance problem. Instead, try to + * map to and reuse existing optimised facilities (e.g. pixman) wherever + * possible. + */ + +static int ati_bpp_from_datatype(ATIVGAState *s) +{ + switch (s->regs.dp_datatype & 0xf) { + case 2: + return 8; + case 3: + case 4: + return 16; + case 5: + return 24; + case 6: + return 32; + default: + qemu_log_mask(LOG_UNIMP, "Unknown dst datatype %d\n", + s->regs.dp_datatype & 0xf); + return 0; + } +} + +void ati_2d_blt(ATIVGAState *s) +{ + /* FIXME it is probably more complex than this and may need to be */ + /* rewritten but for now as a start just to get some output: */ + DisplaySurface *ds = qemu_console_surface(s->vga.con); + DPRINTF("%p %u ds: %p %d %d rop: %x\n", s->vga.vram_ptr, + s->vga.vbe_start_addr, surface_data(ds), surface_stride(ds), + surface_bits_per_pixel(ds), + (s->regs.dp_mix & GMC_ROP3_MASK) >> 16); + DPRINTF("%d %d, %d %d, (%d,%d) -> (%d,%d) %dx%d\n", s->regs.src_offset, + s->regs.dst_offset, s->regs.src_pitch, s->regs.dst_pitch, + s->regs.src_x, s->regs.src_y, s->regs.dst_x, s->regs.dst_y, + s->regs.dst_width, s->regs.dst_height); + switch (s->regs.dp_mix & GMC_ROP3_MASK) { + case ROP3_SRCCOPY: + { + uint8_t *src_bits, *dst_bits, *end; + int src_stride, dst_stride, bpp = ati_bpp_from_datatype(s); + src_bits = s->vga.vram_ptr + s->regs.src_offset; + dst_bits = s->vga.vram_ptr + s->regs.dst_offset; + src_stride = s->regs.src_pitch; + dst_stride = s->regs.dst_pitch; + + if (s->dev_id == PCI_DEVICE_ID_ATI_RAGE128_PF) { + src_bits += s->regs.crtc_offset & 0x07ffffff; + dst_bits += s->regs.crtc_offset & 0x07ffffff; + src_stride *= bpp; + dst_stride *= bpp; + } + src_stride /= sizeof(uint32_t); + dst_stride /= sizeof(uint32_t); + + DPRINTF("pixman_blt(%p, %p, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d)\n", + src_bits, dst_bits, src_stride, dst_stride, bpp, bpp, + s->regs.src_x, s->regs.src_y, s->regs.dst_x, s->regs.dst_y, + s->regs.dst_width, s->regs.dst_height); + end = s->vga.vram_ptr + s->vga.vram_size; + if (src_bits >= end || dst_bits >= end || + src_bits + (s->regs.src_y + s->regs.dst_height) * src_stride + + s->regs.src_x >= end || + dst_bits + (s->regs.dst_y + s->regs.dst_height) * dst_stride + + s->regs.dst_x >= end) { + qemu_log_mask(LOG_UNIMP, "blt outside vram not implemented\n"); + return; + } + pixman_blt((uint32_t *)src_bits, (uint32_t *)dst_bits, + src_stride, dst_stride, bpp, bpp, + s->regs.src_x, s->regs.src_y, + s->regs.dst_x, s->regs.dst_y, + s->regs.dst_width, s->regs.dst_height); + if (dst_bits >= s->vga.vram_ptr + s->vga.vbe_start_addr && + dst_bits < s->vga.vram_ptr + s->vga.vbe_start_addr + + s->vga.vbe_regs[VBE_DISPI_INDEX_YRES] * s->vga.vbe_line_offset) { + memory_region_set_dirty(&s->vga.vram, s->vga.vbe_start_addr + + s->regs.dst_offset + + s->regs.dst_y * surface_stride(ds), + s->regs.dst_height * surface_stride(ds)); + } + s->regs.dst_x += s->regs.dst_width; + s->regs.dst_y += s->regs.dst_height; + break; + } + case ROP3_PATCOPY: + case ROP3_BLACKNESS: + case ROP3_WHITENESS: + { + uint8_t *dst_bits, *end; + int dst_stride, bpp = ati_bpp_from_datatype(s); + uint32_t filler = 0; + dst_bits = s->vga.vram_ptr + s->regs.dst_offset; + dst_stride = s->regs.dst_pitch; + + if (s->dev_id == PCI_DEVICE_ID_ATI_RAGE128_PF) { + dst_bits += s->regs.crtc_offset & 0x07ffffff; + dst_stride *= bpp; + } + dst_stride /= sizeof(uint32_t); + + switch (s->regs.dp_mix & GMC_ROP3_MASK) { + case ROP3_PATCOPY: + filler = bswap32(s->regs.dp_brush_frgd_clr); + break; + case ROP3_BLACKNESS: + filler = rgb_to_pixel32(s->vga.palette[0], s->vga.palette[1], + s->vga.palette[2]) << 8 | 0xff; + break; + case ROP3_WHITENESS: + filler = rgb_to_pixel32(s->vga.palette[3], s->vga.palette[4], + s->vga.palette[5]) << 8 | 0xff; + break; + } + + DPRINTF("pixman_fill(%p, %d, %d, %d, %d, %d, %d, %x)\n", + dst_bits, dst_stride, bpp, + s->regs.dst_x, s->regs.dst_y, + s->regs.dst_width, s->regs.dst_height, + filler); + end = s->vga.vram_ptr + s->vga.vram_size; + if (dst_bits >= end || + dst_bits + (s->regs.dst_y + s->regs.dst_height) * dst_stride + + s->regs.dst_x >= end) { + qemu_log_mask(LOG_UNIMP, "blt outside vram not implemented\n"); + return; + } + pixman_fill((uint32_t *)dst_bits, dst_stride, bpp, + s->regs.dst_x, s->regs.dst_y, + s->regs.dst_width, s->regs.dst_height, + filler); + if (dst_bits >= s->vga.vram_ptr + s->vga.vbe_start_addr && + dst_bits < s->vga.vram_ptr + s->vga.vbe_start_addr + + s->vga.vbe_regs[VBE_DISPI_INDEX_YRES] * s->vga.vbe_line_offset) { + memory_region_set_dirty(&s->vga.vram, s->vga.vbe_start_addr + + s->regs.dst_offset + + s->regs.dst_y * surface_stride(ds), + s->regs.dst_height * surface_stride(ds)); + } + s->regs.dst_y += s->regs.dst_height; + break; + } + default: + qemu_log_mask(LOG_UNIMP, "Unimplemented ati_2d blt op %x\n", + (s->regs.dp_mix & GMC_ROP3_MASK) >> 16); + } +} diff --git a/hw/display/ati_dbg.c b/hw/display/ati_dbg.c new file mode 100644 index 000000000000..1e6c32624e5a --- /dev/null +++ b/hw/display/ati_dbg.c @@ -0,0 +1,259 @@ +#include "ati_int.h" + +#ifdef DEBUG_ATI +struct ati_regdesc { + const char *name; + int num; +}; + +static struct ati_regdesc ati_reg_names[] = { + {"MM_INDEX", 0x0000}, + {"MM_DATA", 0x0004}, + {"CLOCK_CNTL_INDEX", 0x0008}, + {"CLOCK_CNTL_DATA", 0x000c}, + {"BIOS_0_SCRATCH", 0x0010}, + {"BUS_CNTL", 0x0030}, + {"BUS_CNTL1", 0x0034}, + {"GEN_INT_CNTL", 0x0040}, + {"CRTC_GEN_CNTL", 0x0050}, + {"CRTC_EXT_CNTL", 0x0054}, + {"DAC_CNTL", 0x0058}, + {"GPIO_MONID", 0x0068}, + {"I2C_CNTL_1", 0x0094}, + {"PALETTE_INDEX", 0x00b0}, + {"PALETTE_DATA", 0x00b4}, + {"CNFG_CNTL", 0x00e0}, + {"GEN_RESET_CNTL", 0x00f0}, + {"CNFG_MEMSIZE", 0x00f8}, + {"MEM_CNTL", 0x0140}, + {"MC_FB_LOCATION", 0x0148}, + {"MC_AGP_LOCATION", 0x014C}, + {"MC_STATUS", 0x0150}, + {"MEM_POWER_MISC", 0x015c}, + {"AGP_BASE", 0x0170}, + {"AGP_CNTL", 0x0174}, + {"AGP_APER_OFFSET", 0x0178}, + {"PCI_GART_PAGE", 0x017c}, + {"PC_NGUI_MODE", 0x0180}, + {"PC_NGUI_CTLSTAT", 0x0184}, + {"MPP_TB_CONFIG", 0x01C0}, + {"MPP_GP_CONFIG", 0x01C8}, + {"VIPH_CONTROL", 0x01D0}, + {"CRTC_H_TOTAL_DISP", 0x0200}, + {"CRTC_H_SYNC_STRT_WID", 0x0204}, + {"CRTC_V_TOTAL_DISP", 0x0208}, + {"CRTC_V_SYNC_STRT_WID", 0x020c}, + {"CRTC_VLINE_CRNT_VLINE", 0x0210}, + {"CRTC_CRNT_FRAME", 0x0214}, + {"CRTC_GUI_TRIG_VLINE", 0x0218}, + {"CRTC_OFFSET", 0x0224}, + {"CRTC_OFFSET_CNTL", 0x0228}, + {"CRTC_PITCH", 0x022c}, + {"OVR_CLR", 0x0230}, + {"OVR_WID_LEFT_RIGHT", 0x0234}, + {"OVR_WID_TOP_BOTTOM", 0x0238}, + {"CUR_OFFSET", 0x0260}, + {"CUR_HORZ_VERT_POSN", 0x0264}, + {"CUR_HORZ_VERT_OFF", 0x0268}, + {"CUR_CLR0", 0x026c}, + {"CUR_CLR1", 0x0270}, + {"LVDS_GEN_CNTL", 0x02d0}, + {"DDA_CONFIG", 0x02e0}, + {"DDA_ON_OFF", 0x02e4}, + {"VGA_DDA_CONFIG", 0x02e8}, + {"VGA_DDA_ON_OFF", 0x02ec}, + {"CRTC2_H_TOTAL_DISP", 0x0300}, + {"CRTC2_H_SYNC_STRT_WID", 0x0304}, + {"CRTC2_V_TOTAL_DISP", 0x0308}, + {"CRTC2_V_SYNC_STRT_WID", 0x030c}, + {"CRTC2_VLINE_CRNT_VLINE", 0x0310}, + {"CRTC2_CRNT_FRAME", 0x0314}, + {"CRTC2_GUI_TRIG_VLINE", 0x0318}, + {"CRTC2_OFFSET", 0x0324}, + {"CRTC2_OFFSET_CNTL", 0x0328}, + {"CRTC2_PITCH", 0x032c}, + {"DDA2_CONFIG", 0x03e0}, + {"DDA2_ON_OFF", 0x03e4}, + {"CRTC2_GEN_CNTL", 0x03f8}, + {"CRTC2_STATUS", 0x03fc}, + {"OV0_SCALE_CNTL", 0x0420}, + {"SUBPIC_CNTL", 0x0540}, + {"PM4_BUFFER_OFFSET", 0x0700}, + {"PM4_BUFFER_CNTL", 0x0704}, + {"PM4_BUFFER_WM_CNTL", 0x0708}, + {"PM4_BUFFER_DL_RPTR_ADDR", 0x070c}, + {"PM4_BUFFER_DL_RPTR", 0x0710}, + {"PM4_BUFFER_DL_WPTR", 0x0714}, + {"PM4_VC_FPU_SETUP", 0x071c}, + {"PM4_FPU_CNTL", 0x0720}, + {"PM4_VC_FORMAT", 0x0724}, + {"PM4_VC_CNTL", 0x0728}, + {"PM4_VC_I01", 0x072c}, + {"PM4_VC_VLOFF", 0x0730}, + {"PM4_VC_VLSIZE", 0x0734}, + {"PM4_IW_INDOFF", 0x0738}, + {"PM4_IW_INDSIZE", 0x073c}, + {"PM4_FPU_FPX0", 0x0740}, + {"PM4_FPU_FPY0", 0x0744}, + {"PM4_FPU_FPX1", 0x0748}, + {"PM4_FPU_FPY1", 0x074c}, + {"PM4_FPU_FPX2", 0x0750}, + {"PM4_FPU_FPY2", 0x0754}, + {"PM4_FPU_FPY3", 0x0758}, + {"PM4_FPU_FPY4", 0x075c}, + {"PM4_FPU_FPY5", 0x0760}, + {"PM4_FPU_FPY6", 0x0764}, + {"PM4_FPU_FPR", 0x0768}, + {"PM4_FPU_FPG", 0x076c}, + {"PM4_FPU_FPB", 0x0770}, + {"PM4_FPU_FPA", 0x0774}, + {"PM4_FPU_INTXY0", 0x0780}, + {"PM4_FPU_INTXY1", 0x0784}, + {"PM4_FPU_INTXY2", 0x0788}, + {"PM4_FPU_INTARGB", 0x078c}, + {"PM4_FPU_FPTWICEAREA", 0x0790}, + {"PM4_FPU_DMAJOR01", 0x0794}, + {"PM4_FPU_DMAJOR12", 0x0798}, + {"PM4_FPU_DMAJOR02", 0x079c}, + {"PM4_FPU_STAT", 0x07a0}, + {"PM4_STAT", 0x07b8}, + {"PM4_TEST_CNTL", 0x07d0}, + {"PM4_MICROCODE_ADDR", 0x07d4}, + {"PM4_MICROCODE_RADDR", 0x07d8}, + {"PM4_MICROCODE_DATAH", 0x07dc}, + {"PM4_MICROCODE_DATAL", 0x07e0}, + {"PM4_CMDFIFO_ADDR", 0x07e4}, + {"PM4_CMDFIFO_DATAH", 0x07e8}, + {"PM4_CMDFIFO_DATAL", 0x07ec}, + {"PM4_BUFFER_ADDR", 0x07f0}, + {"PM4_BUFFER_DATAH", 0x07f4}, + {"PM4_BUFFER_DATAL", 0x07f8}, + {"PM4_MICRO_CNTL", 0x07fc}, + {"CAP0_TRIG_CNTL", 0x0950}, + {"CAP1_TRIG_CNTL", 0x09c0}, + {"RBBM_STATUS", 0x0e40}, + {"PM4_FIFO_DATA_EVEN", 0x1000}, + {"PM4_FIFO_DATA_ODD", 0x1004}, + {"DST_OFFSET", 0x1404}, + {"DST_PITCH", 0x1408}, + {"DST_WIDTH", 0x140c}, + {"DST_HEIGHT", 0x1410}, + {"SRC_X", 0x1414}, + {"SRC_Y", 0x1418}, + {"DST_X", 0x141c}, + {"DST_Y", 0x1420}, + {"SRC_PITCH_OFFSET", 0x1428}, + {"DST_PITCH_OFFSET", 0x142c}, + {"SRC_Y_X", 0x1434}, + {"DST_Y_X", 0x1438}, + {"DST_HEIGHT_WIDTH", 0x143c}, + {"DP_GUI_MASTER_CNTL", 0x146c}, + {"BRUSH_SCALE", 0x1470}, + {"BRUSH_Y_X", 0x1474}, + {"DP_BRUSH_BKGD_CLR", 0x1478}, + {"DP_BRUSH_FRGD_CLR", 0x147c}, + {"DST_WIDTH_X", 0x1588}, + {"DST_HEIGHT_WIDTH_8", 0x158c}, + {"SRC_X_Y", 0x1590}, + {"DST_X_Y", 0x1594}, + {"DST_WIDTH_HEIGHT", 0x1598}, + {"DST_WIDTH_X_INCY", 0x159c}, + {"DST_HEIGHT_Y", 0x15a0}, + {"DST_X_SUB", 0x15a4}, + {"DST_Y_SUB", 0x15a8}, + {"SRC_OFFSET", 0x15ac}, + {"SRC_PITCH", 0x15b0}, + {"DST_HEIGHT_WIDTH_BW", 0x15b4}, + {"CLR_CMP_CNTL", 0x15c0}, + {"CLR_CMP_CLR_SRC", 0x15c4}, + {"CLR_CMP_CLR_DST", 0x15c8}, + {"CLR_CMP_MASK", 0x15cc}, + {"DP_SRC_FRGD_CLR", 0x15d8}, + {"DP_SRC_BKGD_CLR", 0x15dc}, + {"DST_BRES_ERR", 0x1628}, + {"DST_BRES_INC", 0x162c}, + {"DST_BRES_DEC", 0x1630}, + {"DST_BRES_LNTH", 0x1634}, + {"DST_BRES_LNTH_SUB", 0x1638}, + {"SC_LEFT", 0x1640}, + {"SC_RIGHT", 0x1644}, + {"SC_TOP", 0x1648}, + {"SC_BOTTOM", 0x164c}, + {"SRC_SC_RIGHT", 0x1654}, + {"SRC_SC_BOTTOM", 0x165c}, + {"GUI_DEBUG0", 0x16a0}, + {"GUI_DEBUG1", 0x16a4}, + {"GUI_TIMEOUT", 0x16b0}, + {"GUI_TIMEOUT0", 0x16b4}, + {"GUI_TIMEOUT1", 0x16b8}, + {"GUI_PROBE", 0x16bc}, + {"DP_CNTL", 0x16c0}, + {"DP_DATATYPE", 0x16c4}, + {"DP_MIX", 0x16c8}, + {"DP_WRITE_MASK", 0x16cc}, + {"DP_CNTL_XDIR_YDIR_YMAJOR", 0x16d0}, + {"DEFAULT_OFFSET", 0x16e0}, + {"DEFAULT_PITCH", 0x16e4}, + {"DEFAULT_SC_BOTTOM_RIGHT", 0x16e8}, + {"SC_TOP_LEFT", 0x16ec}, + {"SC_BOTTOM_RIGHT", 0x16f0}, + {"SRC_SC_BOTTOM_RIGHT", 0x16f4}, + {"DST_TILE", 0x1700}, + {"WAIT_UNTIL", 0x1720}, + {"CACHE_CNTL", 0x1724}, + {"GUI_STAT", 0x1740}, + {"PC_GUI_MODE", 0x1744}, + {"PC_GUI_CTLSTAT", 0x1748}, + {"PC_DEBUG_MODE", 0x1760}, + {"BRES_DST_ERR_DEC", 0x1780}, + {"TRAIL_BRES_T12_ERR_DEC", 0x1784}, + {"TRAIL_BRES_T12_INC", 0x1788}, + {"DP_T12_CNTL", 0x178c}, + {"DST_BRES_T1_LNTH", 0x1790}, + {"DST_BRES_T2_LNTH", 0x1794}, + {"SCALE_SRC_HEIGHT_WIDTH", 0x1994}, + {"SCALE_OFFSET_0", 0x1998}, + {"SCALE_PITCH", 0x199c}, + {"SCALE_X_INC", 0x19a0}, + {"SCALE_Y_INC", 0x19a4}, + {"SCALE_HACC", 0x19a8}, + {"SCALE_VACC", 0x19ac}, + {"SCALE_DST_X_Y", 0x19b0}, + {"SCALE_DST_HEIGHT_WIDTH", 0x19b4}, + {"SCALE_3D_CNTL", 0x1a00}, + {"SCALE_3D_DATATYPE", 0x1a20}, + {"SETUP_CNTL", 0x1bc4}, + {"SOLID_COLOR", 0x1bc8}, + {"WINDOW_XY_OFFSET", 0x1bcc}, + {"DRAW_LINE_POINT", 0x1bd0}, + {"SETUP_CNTL_PM4", 0x1bd4}, + {"DST_PITCH_OFFSET_C", 0x1c80}, + {"DP_GUI_MASTER_CNTL_C", 0x1c84}, + {"SC_TOP_LEFT_C", 0x1c88}, + {"SC_BOTTOM_RIGHT_C", 0x1c8c}, + {"CLR_CMP_MASK_3D", 0x1A28}, + {"MISC_3D_STATE_CNTL_REG", 0x1CA0}, + {"MC_SRC1_CNTL", 0x19D8}, + {"TEX_CNTL", 0x1800}, + {"RAGE128_MPP_TB_CONFIG", 0x01c0}, + {NULL, -1} +}; + +const char *ati_reg_name(int num) +{ + int i; + + num &= ~3; + for (i = 0; ati_reg_names[i].name; i++) { + if (ati_reg_names[i].num == num) { + return ati_reg_names[i].name; + } + } + return "unknown"; +} +#else +const char *ati_reg_name(int num) +{ + return ""; +} +#endif diff --git a/vl.c b/vl.c index 4c5cc0d8ad91..4ab7fb37534d 100644 --- a/vl.c +++ b/vl.c @@ -240,6 +240,7 @@ static struct { { .driver = "vmware-svga", .flag = &default_vga }, { .driver = "qxl-vga", .flag = &default_vga }, { .driver = "virtio-vga", .flag = &default_vga }, + { .driver = "ati-vga", .flag = &default_vga }, }; static QemuOptsList qemu_rtc_opts = { diff --git a/default-configs/pci.mak b/default-configs/pci.mak index 037636fa3364..e59e2fa7b6fb 100644 --- a/default-configs/pci.mak +++ b/default-configs/pci.mak @@ -49,3 +49,4 @@ CONFIG_IVSHMEM_DEVICE=$(CONFIG_IVSHMEM) CONFIG_ROCKER=y CONFIG_VFIO=$(CONFIG_LINUX) CONFIG_VFIO_PCI=y +CONFIG_ATI_VGA=y diff --git a/hw/display/Makefile.objs b/hw/display/Makefile.objs index 7c4ae9a0fd0a..963c23f3c8f5 100644 --- a/hw/display/Makefile.objs +++ b/hw/display/Makefile.objs @@ -53,3 +53,5 @@ virtio-gpu-3d.o-cflags := $(VIRGL_CFLAGS) virtio-gpu-3d.o-libs += $(VIRGL_LIBS) obj-$(CONFIG_DPCD) += dpcd.o obj-$(CONFIG_XLNX_ZYNQMP_ARM) += xlnx_dp.o + +obj-$(CONFIG_ATI_VGA) += ati.o ati_2d.o ati_dbg.o diff --git a/hw/display/trace-events b/hw/display/trace-events index 37d3264bb2e6..80993cc4d913 100644 --- a/hw/display/trace-events +++ b/hw/display/trace-events @@ -138,3 +138,7 @@ vga_cirrus_write_blt(uint32_t offset, uint32_t val) "offset 0x%x, val 0x%x" sii9022_read_reg(uint8_t addr, uint8_t val) "addr 0x%02x, val 0x%02x" sii9022_write_reg(uint8_t addr, uint8_t val) "addr 0x%02x, val 0x%02x" sii9022_switch_mode(const char *mode) "mode: %s" + +# hw/display/ati*.c +ati_mm_read(unsigned int size, uint64_t addr, const char *name, uint64_t val) "%u 0x%"HWADDR_PRIx " %s -> 0x%"PRIx64 +ati_mm_write(unsigned int size, uint64_t addr, const char *name, uint64_t val) "%u 0x%"HWADDR_PRIx " %s <- 0x%"PRIx64 -- 2.18.1 ^ permalink raw reply related [flat|nested] 9+ messages in thread
* Re: [Qemu-devel] [PULL 1/5] hw/display: Add basic ATI VGA emulation 2019-03-08 12:39 ` [Qemu-devel] [PULL 1/5] hw/display: Add basic ATI VGA emulation Gerd Hoffmann @ 2019-03-08 16:16 ` BALATON Zoltan 0 siblings, 0 replies; 9+ messages in thread From: BALATON Zoltan @ 2019-03-08 16:16 UTC (permalink / raw) To: Gerd Hoffmann Cc: qemu-devel, Paolo Bonzini, Marcel Apfelbaum, Aleksandar Markovic, Aurelien Jarno, Aleksandar Rikalo, Michael S. Tsirkin, Howard Spoelstra On Fri, 8 Mar 2019, Gerd Hoffmann wrote: > From: BALATON Zoltan <balaton@eik.bme.hu> > > At least two machines, the PPC mac99 and MIPS fulong2e, have an ATI > gfx chip by default (Rage 128 Pro and M6/RV100 respectively) and > guests running on these and the PMON2000 firmware of the fulong2e > expect this to be available. Fortunately these are very similar chips > so they can be mostly emulated in the same device model. This patch > adds basic emulation of these ATI VGA chips. > > While this is incomplete and currently only enough to run the MIPS > firmware and get framebuffer output with Linux, it allows the fulong2e > board to work more like the real hardware and having it in QEMU in > this state provides a way to experiment with it and allows others to > contribute to improve it. It is compiled for all archs but only the > fulong2e (which currently has no display output at all) is set to use > it by default (in a separate patch). > > Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> > Acked-by: Aleksandar Markovic <amarkovic@wavecomp.com> > Message-id: 20190308002431.466C87456B2@zero.eik.bme.hu > Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> This was also Tested-by: Andrew Randrianasulu <randrianasulu@gmail.com> and by Howard Spoelstra <hsp.cat7@gmail.com> who did not send a formal Tested-by: as he's not subscrbed to qemu-devel but I think he would not be oppsed to add his Tested-by: as well. These testing confirmed that Linux console and unaccelerated framebuffer mostly works. There's known problem with 2D and maybe some bugs that can be addressed before release. As a start this is ready to go in now. Thank you, BALATON Zoltan > --- > hw/display/ati_int.h | 96 +++++ > hw/display/ati_regs.h | 461 +++++++++++++++++++++ > hw/display/ati.c | 865 +++++++++++++++++++++++++++++++++++++++ > hw/display/ati_2d.c | 167 ++++++++ > hw/display/ati_dbg.c | 259 ++++++++++++ > vl.c | 1 + > default-configs/pci.mak | 1 + > hw/display/Makefile.objs | 2 + > hw/display/trace-events | 4 + > 9 files changed, 1856 insertions(+) > create mode 100644 hw/display/ati_int.h > create mode 100644 hw/display/ati_regs.h > create mode 100644 hw/display/ati.c > create mode 100644 hw/display/ati_2d.c > create mode 100644 hw/display/ati_dbg.c > > diff --git a/hw/display/ati_int.h b/hw/display/ati_int.h > new file mode 100644 > index 000000000000..a6f3e20e6319 > --- /dev/null > +++ b/hw/display/ati_int.h > @@ -0,0 +1,96 @@ > +/* > + * QEMU ATI SVGA emulation > + * > + * Copyright (c) 2019 BALATON Zoltan > + * > + * This work is licensed under the GNU GPL license version 2 or later. > + */ > + > +#ifndef ATI_INT_H > +#define ATI_INT_H > + > +#include "qemu/osdep.h" > +#include "hw/pci/pci.h" > +#include "vga_int.h" > + > +/*#define DEBUG_ATI*/ > + > +#ifdef DEBUG_ATI > +#define DPRINTF(fmt, ...) printf("%s: " fmt, __func__, ## __VA_ARGS__) > +#else > +#define DPRINTF(fmt, ...) do {} while (0) > +#endif > + > +#define PCI_VENDOR_ID_ATI 0x1002 > +/* Rage128 Pro GL */ > +#define PCI_DEVICE_ID_ATI_RAGE128_PF 0x5046 > +/* Radeon RV100 (VE) */ > +#define PCI_DEVICE_ID_ATI_RADEON_QY 0x5159 > + > +#define TYPE_ATI_VGA "ati-vga" > +#define ATI_VGA(obj) OBJECT_CHECK(ATIVGAState, (obj), TYPE_ATI_VGA) > + > +typedef struct ATIVGARegs { > + uint32_t mm_index; > + uint32_t bios_scratch[8]; > + uint32_t crtc_gen_cntl; > + uint32_t crtc_ext_cntl; > + uint32_t dac_cntl; > + uint32_t crtc_h_total_disp; > + uint32_t crtc_h_sync_strt_wid; > + uint32_t crtc_v_total_disp; > + uint32_t crtc_v_sync_strt_wid; > + uint32_t crtc_offset; > + uint32_t crtc_offset_cntl; > + uint32_t crtc_pitch; > + uint32_t cur_offset; > + uint32_t cur_hv_pos; > + uint32_t cur_hv_offs; > + uint32_t cur_color0; > + uint32_t cur_color1; > + uint32_t dst_offset; > + uint32_t dst_pitch; > + uint32_t dst_tile; > + uint32_t dst_width; > + uint32_t dst_height; > + uint32_t src_offset; > + uint32_t src_pitch; > + uint32_t src_tile; > + uint32_t src_x; > + uint32_t src_y; > + uint32_t dst_x; > + uint32_t dst_y; > + uint32_t dp_gui_master_cntl; > + uint32_t dp_brush_bkgd_clr; > + uint32_t dp_brush_frgd_clr; > + uint32_t dp_src_frgd_clr; > + uint32_t dp_src_bkgd_clr; > + uint32_t dp_cntl; > + uint32_t dp_datatype; > + uint32_t dp_mix; > + uint32_t dp_write_mask; > + uint32_t default_offset; > + uint32_t default_pitch; > + uint32_t default_sc_bottom_right; > +} ATIVGARegs; > + > +typedef struct ATIVGAState { > + PCIDevice dev; > + VGACommonState vga; > + char *model; > + uint16_t dev_id; > + uint8_t mode; > + bool cursor_guest_mode; > + uint16_t cursor_size; > + uint32_t cursor_offset; > + QEMUCursor *cursor; > + MemoryRegion io; > + MemoryRegion mm; > + ATIVGARegs regs; > +} ATIVGAState; > + > +const char *ati_reg_name(int num); > + > +void ati_2d_blt(ATIVGAState *s); > + > +#endif /* ATI_INT_H */ > diff --git a/hw/display/ati_regs.h b/hw/display/ati_regs.h > new file mode 100644 > index 000000000000..923bfd33ceb7 > --- /dev/null > +++ b/hw/display/ati_regs.h > @@ -0,0 +1,461 @@ > +/* > + * ATI VGA register definitions > + * > + * based on: > + * linux/include/video/aty128.h > + * Register definitions for ATI Rage128 boards > + * Anthony Tong <atong@uiuc.edu>, 1999 > + * Brad Douglas <brad@neruo.com>, 2000 > + * > + * and linux/include/video/radeon.h > + * > + * This work is licensed under the GNU GPL license version 2. > + */ > + > +/* > + * Register mapping: > + * 0x0000-0x00ff Misc regs also accessible via io and mmio space > + * 0x0100-0x0eff Misc regs only accessible via mmio > + * 0x0f00-0x0fff Read-only copy of PCI config regs > + * 0x1000-0x13ff Concurrent Command Engine (CCE) regs > + * 0x1400-0x1fff GUI (drawing engine) regs > + */ > + > +#ifndef ATI_REGS_H > +#define ATI_REGS_H > + > +#undef DEFAULT_PITCH /* needed for mingw builds */ > + > +#define MM_INDEX 0x0000 > +#define MM_DATA 0x0004 > +#define CLOCK_CNTL_INDEX 0x0008 > +#define CLOCK_CNTL_DATA 0x000c > +#define BIOS_0_SCRATCH 0x0010 > +#define BUS_CNTL 0x0030 > +#define BUS_CNTL1 0x0034 > +#define GEN_INT_CNTL 0x0040 > +#define CRTC_GEN_CNTL 0x0050 > +#define CRTC_EXT_CNTL 0x0054 > +#define DAC_CNTL 0x0058 > +#define GPIO_MONID 0x0068 > +#define I2C_CNTL_1 0x0094 > +#define PALETTE_INDEX 0x00b0 > +#define PALETTE_DATA 0x00b4 > +#define CNFG_CNTL 0x00e0 > +#define GEN_RESET_CNTL 0x00f0 > +#define CNFG_MEMSIZE 0x00f8 > +#define MEM_CNTL 0x0140 > +#define MC_FB_LOCATION 0x0148 > +#define MC_AGP_LOCATION 0x014C > +#define MC_STATUS 0x0150 > +#define MEM_POWER_MISC 0x015c > +#define AGP_BASE 0x0170 > +#define AGP_CNTL 0x0174 > +#define AGP_APER_OFFSET 0x0178 > +#define PCI_GART_PAGE 0x017c > +#define PC_NGUI_MODE 0x0180 > +#define PC_NGUI_CTLSTAT 0x0184 > +#define MPP_TB_CONFIG 0x01C0 > +#define MPP_GP_CONFIG 0x01C8 > +#define VIPH_CONTROL 0x01D0 > +#define CRTC_H_TOTAL_DISP 0x0200 > +#define CRTC_H_SYNC_STRT_WID 0x0204 > +#define CRTC_V_TOTAL_DISP 0x0208 > +#define CRTC_V_SYNC_STRT_WID 0x020c > +#define CRTC_VLINE_CRNT_VLINE 0x0210 > +#define CRTC_CRNT_FRAME 0x0214 > +#define CRTC_GUI_TRIG_VLINE 0x0218 > +#define CRTC_OFFSET 0x0224 > +#define CRTC_OFFSET_CNTL 0x0228 > +#define CRTC_PITCH 0x022c > +#define OVR_CLR 0x0230 > +#define OVR_WID_LEFT_RIGHT 0x0234 > +#define OVR_WID_TOP_BOTTOM 0x0238 > +#define CUR_OFFSET 0x0260 > +#define CUR_HORZ_VERT_POSN 0x0264 > +#define CUR_HORZ_VERT_OFF 0x0268 > +#define CUR_CLR0 0x026c > +#define CUR_CLR1 0x0270 > +#define LVDS_GEN_CNTL 0x02d0 > +#define DDA_CONFIG 0x02e0 > +#define DDA_ON_OFF 0x02e4 > +#define VGA_DDA_CONFIG 0x02e8 > +#define VGA_DDA_ON_OFF 0x02ec > +#define CRTC2_H_TOTAL_DISP 0x0300 > +#define CRTC2_H_SYNC_STRT_WID 0x0304 > +#define CRTC2_V_TOTAL_DISP 0x0308 > +#define CRTC2_V_SYNC_STRT_WID 0x030c > +#define CRTC2_VLINE_CRNT_VLINE 0x0310 > +#define CRTC2_CRNT_FRAME 0x0314 > +#define CRTC2_GUI_TRIG_VLINE 0x0318 > +#define CRTC2_OFFSET 0x0324 > +#define CRTC2_OFFSET_CNTL 0x0328 > +#define CRTC2_PITCH 0x032c > +#define DDA2_CONFIG 0x03e0 > +#define DDA2_ON_OFF 0x03e4 > +#define CRTC2_GEN_CNTL 0x03f8 > +#define CRTC2_STATUS 0x03fc > +#define OV0_SCALE_CNTL 0x0420 > +#define SUBPIC_CNTL 0x0540 > +#define PM4_BUFFER_OFFSET 0x0700 > +#define PM4_BUFFER_CNTL 0x0704 > +#define PM4_BUFFER_WM_CNTL 0x0708 > +#define PM4_BUFFER_DL_RPTR_ADDR 0x070c > +#define PM4_BUFFER_DL_RPTR 0x0710 > +#define PM4_BUFFER_DL_WPTR 0x0714 > +#define PM4_VC_FPU_SETUP 0x071c > +#define PM4_FPU_CNTL 0x0720 > +#define PM4_VC_FORMAT 0x0724 > +#define PM4_VC_CNTL 0x0728 > +#define PM4_VC_I01 0x072c > +#define PM4_VC_VLOFF 0x0730 > +#define PM4_VC_VLSIZE 0x0734 > +#define PM4_IW_INDOFF 0x0738 > +#define PM4_IW_INDSIZE 0x073c > +#define PM4_FPU_FPX0 0x0740 > +#define PM4_FPU_FPY0 0x0744 > +#define PM4_FPU_FPX1 0x0748 > +#define PM4_FPU_FPY1 0x074c > +#define PM4_FPU_FPX2 0x0750 > +#define PM4_FPU_FPY2 0x0754 > +#define PM4_FPU_FPY3 0x0758 > +#define PM4_FPU_FPY4 0x075c > +#define PM4_FPU_FPY5 0x0760 > +#define PM4_FPU_FPY6 0x0764 > +#define PM4_FPU_FPR 0x0768 > +#define PM4_FPU_FPG 0x076c > +#define PM4_FPU_FPB 0x0770 > +#define PM4_FPU_FPA 0x0774 > +#define PM4_FPU_INTXY0 0x0780 > +#define PM4_FPU_INTXY1 0x0784 > +#define PM4_FPU_INTXY2 0x0788 > +#define PM4_FPU_INTARGB 0x078c > +#define PM4_FPU_FPTWICEAREA 0x0790 > +#define PM4_FPU_DMAJOR01 0x0794 > +#define PM4_FPU_DMAJOR12 0x0798 > +#define PM4_FPU_DMAJOR02 0x079c > +#define PM4_FPU_STAT 0x07a0 > +#define PM4_STAT 0x07b8 > +#define PM4_TEST_CNTL 0x07d0 > +#define PM4_MICROCODE_ADDR 0x07d4 > +#define PM4_MICROCODE_RADDR 0x07d8 > +#define PM4_MICROCODE_DATAH 0x07dc > +#define PM4_MICROCODE_DATAL 0x07e0 > +#define PM4_CMDFIFO_ADDR 0x07e4 > +#define PM4_CMDFIFO_DATAH 0x07e8 > +#define PM4_CMDFIFO_DATAL 0x07ec > +#define PM4_BUFFER_ADDR 0x07f0 > +#define PM4_BUFFER_DATAH 0x07f4 > +#define PM4_BUFFER_DATAL 0x07f8 > +#define PM4_MICRO_CNTL 0x07fc > +#define CAP0_TRIG_CNTL 0x0950 > +#define CAP1_TRIG_CNTL 0x09c0 > + > +#define RBBM_STATUS 0x0e40 > + > +/* > + * GUI Block Memory Mapped Registers > + * These registers are FIFOed. > + */ > +#define PM4_FIFO_DATA_EVEN 0x1000 > +#define PM4_FIFO_DATA_ODD 0x1004 > + > +#define DST_OFFSET 0x1404 > +#define DST_PITCH 0x1408 > +#define DST_WIDTH 0x140c > +#define DST_HEIGHT 0x1410 > +#define SRC_X 0x1414 > +#define SRC_Y 0x1418 > +#define DST_X 0x141c > +#define DST_Y 0x1420 > +#define SRC_PITCH_OFFSET 0x1428 > +#define DST_PITCH_OFFSET 0x142c > +#define SRC_Y_X 0x1434 > +#define DST_Y_X 0x1438 > +#define DST_HEIGHT_WIDTH 0x143c > +#define DP_GUI_MASTER_CNTL 0x146c > +#define BRUSH_SCALE 0x1470 > +#define BRUSH_Y_X 0x1474 > +#define DP_BRUSH_BKGD_CLR 0x1478 > +#define DP_BRUSH_FRGD_CLR 0x147c > +#define DST_WIDTH_X 0x1588 > +#define DST_HEIGHT_WIDTH_8 0x158c > +#define SRC_X_Y 0x1590 > +#define DST_X_Y 0x1594 > +#define DST_WIDTH_HEIGHT 0x1598 > +#define DST_WIDTH_X_INCY 0x159c > +#define DST_HEIGHT_Y 0x15a0 > +#define DST_X_SUB 0x15a4 > +#define DST_Y_SUB 0x15a8 > +#define SRC_OFFSET 0x15ac > +#define SRC_PITCH 0x15b0 > +#define DST_HEIGHT_WIDTH_BW 0x15b4 > +#define CLR_CMP_CNTL 0x15c0 > +#define CLR_CMP_CLR_SRC 0x15c4 > +#define CLR_CMP_CLR_DST 0x15c8 > +#define CLR_CMP_MASK 0x15cc > +#define DP_SRC_FRGD_CLR 0x15d8 > +#define DP_SRC_BKGD_CLR 0x15dc > +#define DST_BRES_ERR 0x1628 > +#define DST_BRES_INC 0x162c > +#define DST_BRES_DEC 0x1630 > +#define DST_BRES_LNTH 0x1634 > +#define DST_BRES_LNTH_SUB 0x1638 > +#define SC_LEFT 0x1640 > +#define SC_RIGHT 0x1644 > +#define SC_TOP 0x1648 > +#define SC_BOTTOM 0x164c > +#define SRC_SC_RIGHT 0x1654 > +#define SRC_SC_BOTTOM 0x165c > +#define GUI_DEBUG0 0x16a0 > +#define GUI_DEBUG1 0x16a4 > +#define GUI_TIMEOUT 0x16b0 > +#define GUI_TIMEOUT0 0x16b4 > +#define GUI_TIMEOUT1 0x16b8 > +#define GUI_PROBE 0x16bc > +#define DP_CNTL 0x16c0 > +#define DP_DATATYPE 0x16c4 > +#define DP_MIX 0x16c8 > +#define DP_WRITE_MASK 0x16cc > +#define DP_CNTL_XDIR_YDIR_YMAJOR 0x16d0 > +#define DEFAULT_OFFSET 0x16e0 > +#define DEFAULT_PITCH 0x16e4 > +#define DEFAULT_SC_BOTTOM_RIGHT 0x16e8 > +#define SC_TOP_LEFT 0x16ec > +#define SC_BOTTOM_RIGHT 0x16f0 > +#define SRC_SC_BOTTOM_RIGHT 0x16f4 > +#define DST_TILE 0x1700 > +#define WAIT_UNTIL 0x1720 > +#define CACHE_CNTL 0x1724 > +#define GUI_STAT 0x1740 > +#define PC_GUI_MODE 0x1744 > +#define PC_GUI_CTLSTAT 0x1748 > +#define PC_DEBUG_MODE 0x1760 > +#define BRES_DST_ERR_DEC 0x1780 > +#define TRAIL_BRES_T12_ERR_DEC 0x1784 > +#define TRAIL_BRES_T12_INC 0x1788 > +#define DP_T12_CNTL 0x178c > +#define DST_BRES_T1_LNTH 0x1790 > +#define DST_BRES_T2_LNTH 0x1794 > +#define SCALE_SRC_HEIGHT_WIDTH 0x1994 > +#define SCALE_OFFSET_0 0x1998 > +#define SCALE_PITCH 0x199c > +#define SCALE_X_INC 0x19a0 > +#define SCALE_Y_INC 0x19a4 > +#define SCALE_HACC 0x19a8 > +#define SCALE_VACC 0x19ac > +#define SCALE_DST_X_Y 0x19b0 > +#define SCALE_DST_HEIGHT_WIDTH 0x19b4 > +#define SCALE_3D_CNTL 0x1a00 > +#define SCALE_3D_DATATYPE 0x1a20 > +#define SETUP_CNTL 0x1bc4 > +#define SOLID_COLOR 0x1bc8 > +#define WINDOW_XY_OFFSET 0x1bcc > +#define DRAW_LINE_POINT 0x1bd0 > +#define SETUP_CNTL_PM4 0x1bd4 > +#define DST_PITCH_OFFSET_C 0x1c80 > +#define DP_GUI_MASTER_CNTL_C 0x1c84 > +#define SC_TOP_LEFT_C 0x1c88 > +#define SC_BOTTOM_RIGHT_C 0x1c8c > + > +#define CLR_CMP_MASK_3D 0x1A28 > +#define MISC_3D_STATE_CNTL_REG 0x1CA0 > +#define MC_SRC1_CNTL 0x19D8 > +#define TEX_CNTL 0x1800 > + > +/* CONSTANTS */ > +#define GUI_ACTIVE 0x80000000 > +#define ENGINE_IDLE 0x0 > + > +#define PLL_WR_EN 0x00000080 > + > +#define CLK_PIN_CNTL 0x01 > +#define PPLL_CNTL 0x02 > +#define PPLL_REF_DIV 0x03 > +#define PPLL_DIV_0 0x04 > +#define PPLL_DIV_1 0x05 > +#define PPLL_DIV_2 0x06 > +#define PPLL_DIV_3 0x07 > +#define VCLK_ECP_CNTL 0x08 > +#define HTOTAL_CNTL 0x09 > +#define X_MPLL_REF_FB_DIV 0x0a > +#define XPLL_CNTL 0x0b > +#define XDLL_CNTL 0x0c > +#define XCLK_CNTL 0x0d > +#define MPLL_CNTL 0x0e > +#define MCLK_CNTL 0x0f > +#define AGP_PLL_CNTL 0x10 > +#define FCP_CNTL 0x12 > +#define PLL_TEST_CNTL 0x13 > +#define P2PLL_CNTL 0x2a > +#define P2PLL_REF_DIV 0x2b > +#define P2PLL_DIV_0 0x2b > +#define POWER_MANAGEMENT 0x2f > + > +#define PPLL_RESET 0x00000001 > +#define PPLL_ATOMIC_UPDATE_EN 0x00010000 > +#define PPLL_VGA_ATOMIC_UPDATE_EN 0x00020000 > +#define PPLL_REF_DIV_MASK 0x000003FF > +#define PPLL_FB3_DIV_MASK 0x000007FF > +#define PPLL_POST3_DIV_MASK 0x00070000 > +#define PPLL_ATOMIC_UPDATE_R 0x00008000 > +#define PPLL_ATOMIC_UPDATE_W 0x00008000 > +#define MEM_CFG_TYPE_MASK 0x00000003 > +#define XCLK_SRC_SEL_MASK 0x00000007 > +#define XPLL_FB_DIV_MASK 0x0000FF00 > +#define X_MPLL_REF_DIV_MASK 0x000000FF > + > +/* Config control values (CONFIG_CNTL) */ > +#define CFG_VGA_IO_DIS 0x00000400 > + > +/* CRTC control values (CRTC_GEN_CNTL) */ > +#define CRTC_CSYNC_EN 0x00000010 > + > +#define CRTC2_DBL_SCAN_EN 0x00000001 > +#define CRTC2_DISPLAY_DIS 0x00800000 > +#define CRTC2_FIFO_EXTSENSE 0x00200000 > +#define CRTC2_ICON_EN 0x00100000 > +#define CRTC2_CUR_EN 0x00010000 > +#define CRTC2_EXT_DISP_EN 0x01000000 > +#define CRTC2_EN 0x02000000 > +#define CRTC2_DISP_REQ_EN_B 0x04000000 > + > +#define CRTC_PIX_WIDTH_MASK 0x00000700 > +#define CRTC_PIX_WIDTH_4BPP 0x00000100 > +#define CRTC_PIX_WIDTH_8BPP 0x00000200 > +#define CRTC_PIX_WIDTH_15BPP 0x00000300 > +#define CRTC_PIX_WIDTH_16BPP 0x00000400 > +#define CRTC_PIX_WIDTH_24BPP 0x00000500 > +#define CRTC_PIX_WIDTH_32BPP 0x00000600 > + > +/* DAC_CNTL bit constants */ > +#define DAC_8BIT_EN 0x00000100 > +#define DAC_MASK 0xFF000000 > +#define DAC_BLANKING 0x00000004 > +#define DAC_RANGE_CNTL 0x00000003 > +#define DAC_CLK_SEL 0x00000010 > +#define DAC_PALETTE_ACCESS_CNTL 0x00000020 > +#define DAC_PALETTE2_SNOOP_EN 0x00000040 > +#define DAC_PDWN 0x00008000 > + > +/* CRTC_EXT_CNTL */ > +#define CRT_CRTC_DISPLAY_DIS 0x00000400 > +#define CRT_CRTC_ON 0x00008000 > + > +/* GEN_RESET_CNTL bit constants */ > +#define SOFT_RESET_GUI 0x00000001 > +#define SOFT_RESET_VCLK 0x00000100 > +#define SOFT_RESET_PCLK 0x00000200 > +#define SOFT_RESET_ECP 0x00000400 > +#define SOFT_RESET_DISPENG_XCLK 0x00000800 > + > +/* PC_GUI_CTLSTAT bit constants */ > +#define PC_BUSY_INIT 0x10000000 > +#define PC_BUSY_GUI 0x20000000 > +#define PC_BUSY_NGUI 0x40000000 > +#define PC_BUSY 0x80000000 > + > +#define BUS_MASTER_DIS 0x00000040 > +#define PM4_BUFFER_CNTL_NONPM4 0x00000000 > + > +/* DP_DATATYPE bit constants */ > +#define DST_8BPP 0x00000002 > +#define DST_15BPP 0x00000003 > +#define DST_16BPP 0x00000004 > +#define DST_24BPP 0x00000005 > +#define DST_32BPP 0x00000006 > + > +#define BRUSH_SOLIDCOLOR 0x00000d00 > + > +/* DP_GUI_MASTER_CNTL bit constants */ > +#define GMC_SRC_PITCH_OFFSET_DEFAULT 0x00000000 > +#define GMC_DST_PITCH_OFFSET_DEFAULT 0x00000000 > +#define GMC_SRC_CLIP_DEFAULT 0x00000000 > +#define GMC_DST_CLIP_DEFAULT 0x00000000 > +#define GMC_BRUSH_SOLIDCOLOR 0x000000d0 > +#define GMC_SRC_DSTCOLOR 0x00003000 > +#define GMC_BYTE_ORDER_MSB_TO_LSB 0x00000000 > +#define GMC_DP_SRC_RECT 0x02000000 > +#define GMC_3D_FCN_EN_CLR 0x00000000 > +#define GMC_AUX_CLIP_CLEAR 0x20000000 > +#define GMC_DST_CLR_CMP_FCN_CLEAR 0x10000000 > +#define GMC_WRITE_MASK_SET 0x40000000 > +#define GMC_DP_CONVERSION_TEMP_6500 0x00000000 > + > +/* DP_GUI_MASTER_CNTL ROP3 named constants */ > +#define GMC_ROP3_MASK 0x00ff0000 > +#define ROP3_BLACKNESS 0x00000000 > +#define ROP3_SRCCOPY 0x00cc0000 > +#define ROP3_PATCOPY 0x00f00000 > +#define ROP3_WHITENESS 0x00ff0000 > + > +#define SRC_DSTCOLOR 0x00030000 > + > +/* DP_CNTL bit constants */ > +#define DST_X_RIGHT_TO_LEFT 0x00000000 > +#define DST_X_LEFT_TO_RIGHT 0x00000001 > +#define DST_Y_BOTTOM_TO_TOP 0x00000000 > +#define DST_Y_TOP_TO_BOTTOM 0x00000002 > +#define DST_X_MAJOR 0x00000000 > +#define DST_Y_MAJOR 0x00000004 > +#define DST_X_TILE 0x00000008 > +#define DST_Y_TILE 0x00000010 > +#define DST_LAST_PEL 0x00000020 > +#define DST_TRAIL_X_RIGHT_TO_LEFT 0x00000000 > +#define DST_TRAIL_X_LEFT_TO_RIGHT 0x00000040 > +#define DST_TRAP_FILL_RIGHT_TO_LEFT 0x00000000 > +#define DST_TRAP_FILL_LEFT_TO_RIGHT 0x00000080 > +#define DST_BRES_SIGN 0x00000100 > +#define DST_HOST_BIG_ENDIAN_EN 0x00000200 > +#define DST_POLYLINE_NONLAST 0x00008000 > +#define DST_RASTER_STALL 0x00010000 > +#define DST_POLY_EDGE 0x00040000 > + > +/* DP_MIX bit constants */ > +#define DP_SRC_RECT 0x00000200 > +#define DP_SRC_HOST 0x00000300 > +#define DP_SRC_HOST_BYTEALIGN 0x00000400 > + > +/* LVDS_GEN_CNTL constants */ > +#define LVDS_BL_MOD_LEVEL_MASK 0x0000ff00 > +#define LVDS_BL_MOD_LEVEL_SHIFT 8 > +#define LVDS_BL_MOD_EN 0x00010000 > +#define LVDS_DIGION 0x00040000 > +#define LVDS_BLON 0x00080000 > +#define LVDS_ON 0x00000001 > +#define LVDS_DISPLAY_DIS 0x00000002 > +#define LVDS_PANEL_TYPE_2PIX_PER_CLK 0x00000004 > +#define LVDS_PANEL_24BITS_TFT 0x00000008 > +#define LVDS_FRAME_MOD_NO 0x00000000 > +#define LVDS_FRAME_MOD_2_LEVELS 0x00000010 > +#define LVDS_FRAME_MOD_4_LEVELS 0x00000020 > +#define LVDS_RST_FM 0x00000040 > +#define LVDS_EN 0x00000080 > + > +/* CRTC2_GEN_CNTL constants */ > +#define CRTC2_EN 0x02000000 > + > +/* POWER_MANAGEMENT constants */ > +#define PWR_MGT_ON 0x00000001 > +#define PWR_MGT_MODE_MASK 0x00000006 > +#define PWR_MGT_MODE_PIN 0x00000000 > +#define PWR_MGT_MODE_REGISTER 0x00000002 > +#define PWR_MGT_MODE_TIMER 0x00000004 > +#define PWR_MGT_MODE_PCI 0x00000006 > +#define PWR_MGT_AUTO_PWR_UP_EN 0x00000008 > +#define PWR_MGT_ACTIVITY_PIN_ON 0x00000010 > +#define PWR_MGT_STANDBY_POL 0x00000020 > +#define PWR_MGT_SUSPEND_POL 0x00000040 > +#define PWR_MGT_SELF_REFRESH 0x00000080 > +#define PWR_MGT_ACTIVITY_PIN_EN 0x00000100 > +#define PWR_MGT_KEYBD_SNOOP 0x00000200 > +#define PWR_MGT_TRISTATE_MEM_EN 0x00000800 > +#define PWR_MGT_SELW4MS 0x00001000 > +#define PWR_MGT_SLOWDOWN_MCLK 0x00002000 > + > +#define PMI_PMSCR_REG 0x60 > + > +/* used by ATI bug fix for hardware ROM */ > +#define RAGE128_MPP_TB_CONFIG 0x01c0 > + > +#endif /* ATI_REGS_H */ > diff --git a/hw/display/ati.c b/hw/display/ati.c > new file mode 100644 > index 000000000000..8322f52affca > --- /dev/null > +++ b/hw/display/ati.c > @@ -0,0 +1,865 @@ > +/* > + * QEMU ATI SVGA emulation > + * > + * Copyright (c) 2019 BALATON Zoltan > + * > + * This work is licensed under the GNU GPL license version 2 or later. > + */ > + > +/* > + * WARNING: > + * This is very incomplete and only enough for Linux console and some > + * unaccelerated X output at the moment. > + * Currently it's little more than a frame buffer with minimal functions, > + * other more advanced features of the hardware are yet to be implemented. > + * We only aim for Rage 128 Pro (and some RV100) and 2D only at first, > + * No 3D at all yet (maybe after 2D works, but feel free to improve it) > + */ > + > +#include "ati_int.h" > +#include "ati_regs.h" > +#include "vga_regs.h" > +#include "qemu/log.h" > +#include "qemu/error-report.h" > +#include "qapi/error.h" > +#include "hw/hw.h" > +#include "ui/console.h" > +#include "trace.h" > + > +#define ATI_DEBUG_HW_CURSOR 0 > + > +static const struct { > + const char *name; > + uint16_t dev_id; > +} ati_model_aliases[] = { > + { "rage128p", PCI_DEVICE_ID_ATI_RAGE128_PF }, > + { "rv100", PCI_DEVICE_ID_ATI_RADEON_QY }, > +}; > + > +enum { VGA_MODE, EXT_MODE }; > + > +static void ati_vga_switch_mode(ATIVGAState *s) > +{ > + DPRINTF("%d -> %d\n", > + s->mode, !!(s->regs.crtc_gen_cntl & CRTC2_EXT_DISP_EN)); > + if (s->regs.crtc_gen_cntl & CRTC2_EXT_DISP_EN) { > + /* Extended mode enabled */ > + s->mode = EXT_MODE; > + if (s->regs.crtc_gen_cntl & CRTC2_EN) { > + /* CRT controller enabled, use CRTC values */ > + uint32_t offs = s->regs.crtc_offset & 0x07ffffff; > + int stride = (s->regs.crtc_pitch & 0x7ff) * 8; > + int bpp = 0; > + int h, v; > + > + if (s->regs.crtc_h_total_disp == 0) { > + s->regs.crtc_h_total_disp = ((640 / 8) - 1) << 16; > + } > + if (s->regs.crtc_v_total_disp == 0) { > + s->regs.crtc_v_total_disp = (480 - 1) << 16; > + } > + h = ((s->regs.crtc_h_total_disp >> 16) + 1) * 8; > + v = (s->regs.crtc_v_total_disp >> 16) + 1; > + switch (s->regs.crtc_gen_cntl & CRTC_PIX_WIDTH_MASK) { > + case CRTC_PIX_WIDTH_4BPP: > + bpp = 4; > + break; > + case CRTC_PIX_WIDTH_8BPP: > + bpp = 8; > + break; > + case CRTC_PIX_WIDTH_15BPP: > + bpp = 15; > + break; > + case CRTC_PIX_WIDTH_16BPP: > + bpp = 16; > + break; > + case CRTC_PIX_WIDTH_24BPP: > + bpp = 24; > + break; > + case CRTC_PIX_WIDTH_32BPP: > + bpp = 32; > + break; > + default: > + qemu_log_mask(LOG_UNIMP, "Unsupported bpp value\n"); > + } > + assert(bpp != 0); > + DPRINTF("Switching to %dx%d %d %d @ %x\n", h, v, stride, bpp, offs); > + vbe_ioport_write_index(&s->vga, 0, VBE_DISPI_INDEX_ENABLE); > + vbe_ioport_write_data(&s->vga, 0, VBE_DISPI_DISABLED); > + /* reset VBE regs then set up mode */ > + s->vga.vbe_regs[VBE_DISPI_INDEX_XRES] = h; > + s->vga.vbe_regs[VBE_DISPI_INDEX_YRES] = v; > + s->vga.vbe_regs[VBE_DISPI_INDEX_BPP] = bpp; > + /* enable mode via ioport so it updates vga regs */ > + vbe_ioport_write_index(&s->vga, 0, VBE_DISPI_INDEX_ENABLE); > + vbe_ioport_write_data(&s->vga, 0, VBE_DISPI_ENABLED | > + VBE_DISPI_LFB_ENABLED | VBE_DISPI_NOCLEARMEM | > + (s->regs.dac_cntl & DAC_8BIT_EN ? VBE_DISPI_8BIT_DAC : 0)); > + /* now set offset and stride after enable as that resets these */ > + if (stride) { > + vbe_ioport_write_index(&s->vga, 0, VBE_DISPI_INDEX_VIRT_WIDTH); > + vbe_ioport_write_data(&s->vga, 0, stride); > + if (offs % stride == 0) { > + vbe_ioport_write_index(&s->vga, 0, VBE_DISPI_INDEX_Y_OFFSET); > + vbe_ioport_write_data(&s->vga, 0, offs / stride); > + } else { > + /* FIXME what to do with this? */ > + error_report("VGA offset is not multiple of pitch, " > + "expect bad picture"); > + } > + } > + } > + } else { > + /* VGA mode enabled */ > + s->mode = VGA_MODE; > + vbe_ioport_write_index(&s->vga, 0, VBE_DISPI_INDEX_ENABLE); > + vbe_ioport_write_data(&s->vga, 0, VBE_DISPI_DISABLED); > + } > +} > + > +/* Used by host side hardware cursor */ > +static void ati_cursor_define(ATIVGAState *s) > +{ > + uint8_t data[1024]; > + uint8_t *src; > + int i, j, idx = 0; > + > + if ((s->regs.cur_offset & BIT(31)) || s->cursor_guest_mode) { > + return; /* Do not update cursor if locked or rendered by guest */ > + } > + /* FIXME handle cur_hv_offs correctly */ > + src = s->vga.vram_ptr + (s->regs.crtc_offset & 0x07ffffff) + > + s->regs.cur_offset - (s->regs.cur_hv_offs >> 16) - > + (s->regs.cur_hv_offs & 0xffff) * 16; > + for (i = 0; i < 64; i++) { > + for (j = 0; j < 8; j++, idx++) { > + data[idx] = src[i * 16 + j]; > + data[512 + idx] = src[i * 16 + j + 8]; > + } > + } > + if (!s->cursor) { > + s->cursor = cursor_alloc(64, 64); > + } > + cursor_set_mono(s->cursor, s->regs.cur_color1, s->regs.cur_color0, > + &data[512], 1, &data[0]); > + dpy_cursor_define(s->vga.con, s->cursor); > +} > + > +/* Alternatively support guest rendered hardware cursor */ > +static void ati_cursor_invalidate(VGACommonState *vga) > +{ > + ATIVGAState *s = container_of(vga, ATIVGAState, vga); > + int size = (s->regs.crtc_gen_cntl & CRTC2_CUR_EN) ? 64 : 0; > + > + if (s->regs.cur_offset & BIT(31)) { > + return; /* Do not update cursor if locked */ > + } > + if (s->cursor_size != size || > + vga->hw_cursor_x != s->regs.cur_hv_pos >> 16 || > + vga->hw_cursor_y != (s->regs.cur_hv_pos & 0xffff) || > + s->cursor_offset != s->regs.cur_offset - (s->regs.cur_hv_offs >> 16) - > + (s->regs.cur_hv_offs & 0xffff) * 16) { > + /* Remove old cursor then update and show new one if needed */ > + vga_invalidate_scanlines(vga, vga->hw_cursor_y, vga->hw_cursor_y + 63); > + vga->hw_cursor_x = s->regs.cur_hv_pos >> 16; > + vga->hw_cursor_y = s->regs.cur_hv_pos & 0xffff; > + s->cursor_offset = s->regs.cur_offset - (s->regs.cur_hv_offs >> 16) - > + (s->regs.cur_hv_offs & 0xffff) * 16; > + s->cursor_size = size; > + if (size) { > + vga_invalidate_scanlines(vga, > + vga->hw_cursor_y, vga->hw_cursor_y + 63); > + } > + } > +} > + > +static void ati_cursor_draw_line(VGACommonState *vga, uint8_t *d, int scr_y) > +{ > + ATIVGAState *s = container_of(vga, ATIVGAState, vga); > + uint8_t *src; > + uint32_t *dp = (uint32_t *)d; > + int i, j, h; > + > + if (!(s->regs.crtc_gen_cntl & CRTC2_CUR_EN) || > + scr_y < vga->hw_cursor_y || scr_y >= vga->hw_cursor_y + 64 || > + scr_y > s->regs.crtc_v_total_disp >> 16) { > + return; > + } > + /* FIXME handle cur_hv_offs correctly */ > + src = s->vga.vram_ptr + (s->regs.crtc_offset & 0x07ffffff) + > + s->cursor_offset + (scr_y - vga->hw_cursor_y) * 16; > + dp = &dp[vga->hw_cursor_x]; > + h = ((s->regs.crtc_h_total_disp >> 16) + 1) * 8; > + for (i = 0; i < 8; i++) { > + uint32_t color; > + uint8_t abits = src[i]; > + uint8_t xbits = src[i + 8]; > + for (j = 0; j < 8; j++, abits <<= 1, xbits <<= 1) { > + if (abits & BIT(7)) { > + if (xbits & BIT(7)) { > + color = dp[i * 8 + j] ^ 0xffffffff; /* complement */ > + } else { > + continue; /* transparent, no change */ > + } > + } else { > + color = (xbits & BIT(7) ? s->regs.cur_color1 : > + s->regs.cur_color0) << 8 | 0xff; > + } > + if (vga->hw_cursor_x + i * 8 + j >= h) { > + return; /* end of screen, don't span to next line */ > + } > + dp[i * 8 + j] = color; > + } > + } > +} > + > +static inline uint64_t ati_reg_read_offs(uint32_t reg, int offs, > + unsigned int size) > +{ > + if (offs == 0 && size == 4) { > + return reg; > + } else { > + return extract32(reg, offs * BITS_PER_BYTE, size * BITS_PER_BYTE); > + } > +} > + > +static uint64_t ati_mm_read(void *opaque, hwaddr addr, unsigned int size) > +{ > + ATIVGAState *s = opaque; > + uint64_t val = 0; > + > + switch (addr) { > + case MM_INDEX: > + val = s->regs.mm_index; > + break; > + case MM_DATA ... MM_DATA + 3: > + /* indexed access to regs or memory */ > + if (s->regs.mm_index & BIT(31)) { > + if (s->regs.mm_index <= s->vga.vram_size - size) { > + int i = size - 1; > + while (i >= 0) { > + val <<= 8; > + val |= s->vga.vram_ptr[s->regs.mm_index + i--]; > + } > + } > + } else { > + val = ati_mm_read(s, s->regs.mm_index + addr - MM_DATA, size); > + } > + break; > + case BIOS_0_SCRATCH ... BUS_CNTL - 1: > + { > + int i = (addr - BIOS_0_SCRATCH) / 4; > + if (s->dev_id == PCI_DEVICE_ID_ATI_RAGE128_PF && i > 3) { > + break; > + } > + val = ati_reg_read_offs(s->regs.bios_scratch[i], > + addr - (BIOS_0_SCRATCH + i * 4), size); > + break; > + } > + case CRTC_GEN_CNTL ... CRTC_GEN_CNTL + 3: > + val = ati_reg_read_offs(s->regs.crtc_gen_cntl, > + addr - CRTC_GEN_CNTL, size); > + break; > + case CRTC_EXT_CNTL ... CRTC_EXT_CNTL + 3: > + val = ati_reg_read_offs(s->regs.crtc_ext_cntl, > + addr - CRTC_EXT_CNTL, size); > + break; > + case DAC_CNTL: > + val = s->regs.dac_cntl; > + break; > +/* case GPIO_MONID: FIXME hook up DDC I2C here */ > + case PALETTE_INDEX: > + /* FIXME unaligned access */ > + val = vga_ioport_read(&s->vga, VGA_PEL_IR) << 16; > + val |= vga_ioport_read(&s->vga, VGA_PEL_IW) & 0xff; > + break; > + case PALETTE_DATA: > + val = vga_ioport_read(&s->vga, VGA_PEL_D); > + break; > + case CNFG_MEMSIZE: > + val = s->vga.vram_size; > + break; > + case MC_STATUS: > + val = 5; > + break; > + case RBBM_STATUS: > + case GUI_STAT: > + val = 64; /* free CMDFIFO entries */ > + break; > + case CRTC_H_TOTAL_DISP: > + val = s->regs.crtc_h_total_disp; > + break; > + case CRTC_H_SYNC_STRT_WID: > + val = s->regs.crtc_h_sync_strt_wid; > + break; > + case CRTC_V_TOTAL_DISP: > + val = s->regs.crtc_v_total_disp; > + break; > + case CRTC_V_SYNC_STRT_WID: > + val = s->regs.crtc_v_sync_strt_wid; > + break; > + case CRTC_OFFSET: > + val = s->regs.crtc_offset; > + break; > + case CRTC_OFFSET_CNTL: > + val = s->regs.crtc_offset_cntl; > + break; > + case CRTC_PITCH: > + val = s->regs.crtc_pitch; > + break; > + case 0xf00 ... 0xfff: > + val = pci_default_read_config(&s->dev, addr - 0xf00, size); > + break; > + case CUR_OFFSET: > + val = s->regs.cur_offset; > + break; > + case CUR_HORZ_VERT_POSN: > + val = s->regs.cur_hv_pos; > + val |= s->regs.cur_offset & BIT(31); > + break; > + case CUR_HORZ_VERT_OFF: > + val = s->regs.cur_hv_offs; > + val |= s->regs.cur_offset & BIT(31); > + break; > + case CUR_CLR0: > + val = s->regs.cur_color0; > + break; > + case CUR_CLR1: > + val = s->regs.cur_color1; > + break; > + case DST_OFFSET: > + val = s->regs.dst_offset; > + break; > + case DST_PITCH: > + val = s->regs.dst_pitch; > + if (s->dev_id == PCI_DEVICE_ID_ATI_RAGE128_PF) { > + val &= s->regs.dst_tile << 16; > + } > + break; > + case DST_WIDTH: > + val = s->regs.dst_width; > + break; > + case DST_HEIGHT: > + val = s->regs.dst_height; > + break; > + case SRC_X: > + val = s->regs.src_x; > + break; > + case SRC_Y: > + val = s->regs.src_y; > + break; > + case DST_X: > + val = s->regs.dst_x; > + break; > + case DST_Y: > + val = s->regs.dst_y; > + break; > + case DP_GUI_MASTER_CNTL: > + val = s->regs.dp_gui_master_cntl; > + break; > + case SRC_OFFSET: > + val = s->regs.src_offset; > + break; > + case SRC_PITCH: > + val = s->regs.src_pitch; > + if (s->dev_id == PCI_DEVICE_ID_ATI_RAGE128_PF) { > + val &= s->regs.src_tile << 16; > + } > + break; > + case DP_BRUSH_BKGD_CLR: > + val = s->regs.dp_brush_bkgd_clr; > + break; > + case DP_BRUSH_FRGD_CLR: > + val = s->regs.dp_brush_frgd_clr; > + break; > + case DP_SRC_FRGD_CLR: > + val = s->regs.dp_src_frgd_clr; > + break; > + case DP_SRC_BKGD_CLR: > + val = s->regs.dp_src_bkgd_clr; > + break; > + case DP_CNTL: > + val = s->regs.dp_cntl; > + break; > + case DP_DATATYPE: > + val = s->regs.dp_datatype; > + break; > + case DP_MIX: > + val = s->regs.dp_mix; > + break; > + case DP_WRITE_MASK: > + val = s->regs.dp_write_mask; > + break; > + case DEFAULT_OFFSET: > + val = s->regs.default_offset; > + break; > + case DEFAULT_PITCH: > + val = s->regs.default_pitch; > + break; > + case DEFAULT_SC_BOTTOM_RIGHT: > + val = s->regs.default_sc_bottom_right; > + break; > + default: > + break; > + } > + if (addr < CUR_OFFSET || addr > CUR_CLR1 || ATI_DEBUG_HW_CURSOR) { > + trace_ati_mm_read(size, addr, ati_reg_name(addr & ~3ULL), val); > + } > + return val; > +} > + > +static inline void ati_reg_write_offs(uint32_t *reg, int offs, > + uint64_t data, unsigned int size) > +{ > + if (offs == 0 && size == 4) { > + *reg = data; > + } else { > + *reg = deposit32(*reg, offs * BITS_PER_BYTE, size * BITS_PER_BYTE, > + data); > + } > +} > + > +static void ati_mm_write(void *opaque, hwaddr addr, > + uint64_t data, unsigned int size) > +{ > + ATIVGAState *s = opaque; > + > + if (addr < CUR_OFFSET || addr > CUR_CLR1 || ATI_DEBUG_HW_CURSOR) { > + trace_ati_mm_write(size, addr, ati_reg_name(addr & ~3ULL), data); > + } > + switch (addr) { > + case MM_INDEX: > + s->regs.mm_index = data; > + break; > + case MM_DATA ... MM_DATA + 3: > + /* indexed access to regs or memory */ > + if (s->regs.mm_index & BIT(31)) { > + if (s->regs.mm_index <= s->vga.vram_size - size) { > + int i = 0; > + while (i < size) { > + s->vga.vram_ptr[s->regs.mm_index + i] = data & 0xff; > + data >>= 8; > + } > + } > + } else { > + ati_mm_write(s, s->regs.mm_index + addr - MM_DATA, data, size); > + } > + break; > + case BIOS_0_SCRATCH ... BUS_CNTL - 1: > + { > + int i = (addr - BIOS_0_SCRATCH) / 4; > + if (s->dev_id == PCI_DEVICE_ID_ATI_RAGE128_PF && i > 3) { > + break; > + } > + ati_reg_write_offs(&s->regs.bios_scratch[i], > + addr - (BIOS_0_SCRATCH + i * 4), data, size); > + break; > + } > + case CRTC_GEN_CNTL ... CRTC_GEN_CNTL + 3: > + { > + uint32_t val = s->regs.crtc_gen_cntl; > + ati_reg_write_offs(&s->regs.crtc_gen_cntl, > + addr - CRTC_GEN_CNTL, data, size); > + if ((val & CRTC2_CUR_EN) != (s->regs.crtc_gen_cntl & CRTC2_CUR_EN)) { > + if (s->cursor_guest_mode) { > + s->vga.force_shadow = !!(s->regs.crtc_gen_cntl & CRTC2_CUR_EN); > + } else { > + if (s->regs.crtc_gen_cntl & CRTC2_CUR_EN) { > + ati_cursor_define(s); > + } > + dpy_mouse_set(s->vga.con, s->regs.cur_hv_pos >> 16, > + s->regs.cur_hv_pos & 0xffff, > + (s->regs.crtc_gen_cntl & CRTC2_CUR_EN) != 0); > + } > + } > + if ((val & (CRTC2_EXT_DISP_EN | CRTC2_EN)) != > + (s->regs.crtc_gen_cntl & (CRTC2_EXT_DISP_EN | CRTC2_EN))) { > + ati_vga_switch_mode(s); > + } > + break; > + } > + case CRTC_EXT_CNTL ... CRTC_EXT_CNTL + 3: > + { > + uint32_t val = s->regs.crtc_ext_cntl; > + ati_reg_write_offs(&s->regs.crtc_ext_cntl, > + addr - CRTC_EXT_CNTL, data, size); > + if (s->regs.crtc_ext_cntl & CRT_CRTC_DISPLAY_DIS) { > + DPRINTF("Display disabled\n"); > + s->vga.ar_index &= ~BIT(5); > + } else { > + DPRINTF("Display enabled\n"); > + s->vga.ar_index |= BIT(5); > + ati_vga_switch_mode(s); > + } > + if ((val & CRT_CRTC_DISPLAY_DIS) != > + (s->regs.crtc_ext_cntl & CRT_CRTC_DISPLAY_DIS)) { > + ati_vga_switch_mode(s); > + } > + break; > + } > + case DAC_CNTL: > + s->regs.dac_cntl = data & 0xffffe3ff; > + s->vga.dac_8bit = !!(data & DAC_8BIT_EN); > + break; > +/* case GPIO_MONID: FIXME hook up DDC I2C here */ > + case PALETTE_INDEX ... PALETTE_INDEX + 3: > + if (size == 4) { > + vga_ioport_write(&s->vga, VGA_PEL_IR, (data >> 16) & 0xff); > + vga_ioport_write(&s->vga, VGA_PEL_IW, data & 0xff); > + } else { > + if (addr == PALETTE_INDEX) { > + vga_ioport_write(&s->vga, VGA_PEL_IW, data & 0xff); > + } else { > + vga_ioport_write(&s->vga, VGA_PEL_IR, data & 0xff); > + } > + } > + break; > + case PALETTE_DATA ... PALETTE_DATA + 3: > + data <<= addr - PALETTE_DATA; > + data = bswap32(data) >> 8; > + vga_ioport_write(&s->vga, VGA_PEL_D, data & 0xff); > + data >>= 8; > + vga_ioport_write(&s->vga, VGA_PEL_D, data & 0xff); > + data >>= 8; > + vga_ioport_write(&s->vga, VGA_PEL_D, data & 0xff); > + break; > + case CRTC_H_TOTAL_DISP: > + s->regs.crtc_h_total_disp = data & 0x07ff07ff; > + break; > + case CRTC_H_SYNC_STRT_WID: > + s->regs.crtc_h_sync_strt_wid = data & 0x17bf1fff; > + break; > + case CRTC_V_TOTAL_DISP: > + s->regs.crtc_v_total_disp = data & 0x0fff0fff; > + break; > + case CRTC_V_SYNC_STRT_WID: > + s->regs.crtc_v_sync_strt_wid = data & 0x9f0fff; > + break; > + case CRTC_OFFSET: > + s->regs.crtc_offset = data & 0xc7ffffff; > + break; > + case CRTC_OFFSET_CNTL: > + s->regs.crtc_offset_cntl = data; /* FIXME */ > + break; > + case CRTC_PITCH: > + s->regs.crtc_pitch = data & 0x07ff07ff; > + break; > + case 0xf00 ... 0xfff: > + /* read-only copy of PCI config space so ignore writes */ > + break; > + case CUR_OFFSET: > + if (s->regs.cur_offset != (data & 0x87fffff0)) { > + s->regs.cur_offset = data & 0x87fffff0; > + ati_cursor_define(s); > + } > + break; > + case CUR_HORZ_VERT_POSN: > + s->regs.cur_hv_pos = data & 0x3fff0fff; > + if (data & BIT(31)) { > + s->regs.cur_offset |= data & BIT(31); > + } else if (s->regs.cur_offset & BIT(31)) { > + s->regs.cur_offset &= ~BIT(31); > + ati_cursor_define(s); > + } > + if (!s->cursor_guest_mode && > + (s->regs.crtc_gen_cntl & CRTC2_CUR_EN) && !(data & BIT(31))) { > + dpy_mouse_set(s->vga.con, s->regs.cur_hv_pos >> 16, > + s->regs.cur_hv_pos & 0xffff, 1); > + } > + break; > + case CUR_HORZ_VERT_OFF: > + s->regs.cur_hv_offs = data & 0x3f003f; > + if (data & BIT(31)) { > + s->regs.cur_offset |= data & BIT(31); > + } else if (s->regs.cur_offset & BIT(31)) { > + s->regs.cur_offset &= ~BIT(31); > + ati_cursor_define(s); > + } > + break; > + case CUR_CLR0: > + if (s->regs.cur_color0 != (data & 0xffffff)) { > + s->regs.cur_color0 = data & 0xffffff; > + ati_cursor_define(s); > + } > + break; > + case CUR_CLR1: > + /* > + * Update cursor unconditionally here because some clients set up > + * other registers before actually writing cursor data to memory at > + * offset so we would miss cursor change unless always updating here > + */ > + s->regs.cur_color1 = data & 0xffffff; > + ati_cursor_define(s); > + break; > + case DST_OFFSET: > + if (s->dev_id == PCI_DEVICE_ID_ATI_RAGE128_PF) { > + s->regs.dst_offset = data & 0xfffffff0; > + } else { > + s->regs.dst_offset = data & 0xfffffc00; > + } > + break; > + case DST_PITCH: > + if (s->dev_id == PCI_DEVICE_ID_ATI_RAGE128_PF) { > + s->regs.dst_pitch = data & 0x3fff; > + s->regs.dst_tile = (data >> 16) & 1; > + } else { > + s->regs.dst_pitch = data & 0x3ff0; > + } > + break; > + case DST_TILE: > + if (s->dev_id == PCI_DEVICE_ID_ATI_RADEON_QY) { > + s->regs.dst_tile = data & 3; > + } > + break; > + case DST_WIDTH: > + s->regs.dst_width = data & 0x3fff; > + ati_2d_blt(s); > + break; > + case DST_HEIGHT: > + s->regs.dst_height = data & 0x3fff; > + break; > + case SRC_X: > + s->regs.src_x = data & 0x3fff; > + break; > + case SRC_Y: > + s->regs.src_y = data & 0x3fff; > + break; > + case DST_X: > + s->regs.dst_x = data & 0x3fff; > + break; > + case DST_Y: > + s->regs.dst_y = data & 0x3fff; > + break; > + case SRC_PITCH_OFFSET: > + if (s->dev_id == PCI_DEVICE_ID_ATI_RAGE128_PF) { > + s->regs.src_offset = (data & 0x1fffff) << 5; > + s->regs.src_pitch = (data >> 21) & 0x3ff; > + s->regs.src_tile = data >> 31; > + } else { > + s->regs.src_offset = (data & 0x3fffff) << 11; > + s->regs.src_pitch = (data & 0x3fc00000) >> 16; > + s->regs.src_tile = (data >> 30) & 1; > + } > + break; > + case DST_PITCH_OFFSET: > + if (s->dev_id == PCI_DEVICE_ID_ATI_RAGE128_PF) { > + s->regs.dst_offset = (data & 0x1fffff) << 5; > + s->regs.dst_pitch = (data >> 21) & 0x3ff; > + s->regs.dst_tile = data >> 31; > + } else { > + s->regs.dst_offset = (data & 0x3fffff) << 11; > + s->regs.dst_pitch = (data & 0x3fc00000) >> 16; > + s->regs.dst_tile = data >> 30; > + } > + break; > + case SRC_Y_X: > + s->regs.src_x = data & 0x3fff; > + s->regs.src_y = (data >> 16) & 0x3fff; > + break; > + case DST_Y_X: > + s->regs.dst_x = data & 0x3fff; > + s->regs.dst_y = (data >> 16) & 0x3fff; > + break; > + case DST_HEIGHT_WIDTH: > + s->regs.dst_width = data & 0x3fff; > + s->regs.dst_height = (data >> 16) & 0x3fff; > + ati_2d_blt(s); > + break; > + case DP_GUI_MASTER_CNTL: > + s->regs.dp_gui_master_cntl = data & 0xf800000f; > + s->regs.dp_datatype = (data & 0x0f00) >> 8 | (data & 0x30f0) << 4 | > + (data & 0x4000) << 16; > + s->regs.dp_mix = (data & GMC_ROP3_MASK) | (data & 0x7000000) >> 16; > + break; > + case DST_WIDTH_X: > + s->regs.dst_x = data & 0x3fff; > + s->regs.dst_width = (data >> 16) & 0x3fff; > + ati_2d_blt(s); > + break; > + case SRC_X_Y: > + s->regs.src_y = data & 0x3fff; > + s->regs.src_x = (data >> 16) & 0x3fff; > + break; > + case DST_X_Y: > + s->regs.dst_y = data & 0x3fff; > + s->regs.dst_x = (data >> 16) & 0x3fff; > + break; > + case DST_WIDTH_HEIGHT: > + s->regs.dst_height = data & 0x3fff; > + s->regs.dst_width = (data >> 16) & 0x3fff; > + ati_2d_blt(s); > + break; > + case DST_HEIGHT_Y: > + s->regs.dst_y = data & 0x3fff; > + s->regs.dst_height = (data >> 16) & 0x3fff; > + break; > + case SRC_OFFSET: > + if (s->dev_id == PCI_DEVICE_ID_ATI_RAGE128_PF) { > + s->regs.src_offset = data & 0xfffffff0; > + } else { > + s->regs.src_offset = data & 0xfffffc00; > + } > + break; > + case SRC_PITCH: > + if (s->dev_id == PCI_DEVICE_ID_ATI_RAGE128_PF) { > + s->regs.src_pitch = data & 0x3fff; > + s->regs.src_tile = (data >> 16) & 1; > + } else { > + s->regs.src_pitch = data & 0x3ff0; > + } > + break; > + case DP_BRUSH_BKGD_CLR: > + s->regs.dp_brush_bkgd_clr = data; > + break; > + case DP_BRUSH_FRGD_CLR: > + s->regs.dp_brush_frgd_clr = data; > + break; > + case DP_CNTL: > + s->regs.dp_cntl = data; > + break; > + case DP_DATATYPE: > + s->regs.dp_datatype = data & 0xe0070f0f; > + break; > + case DP_MIX: > + s->regs.dp_mix = data & 0x00ff0700; > + break; > + case DP_WRITE_MASK: > + s->regs.dp_write_mask = data; > + break; > + case DEFAULT_OFFSET: > + data &= (s->dev_id == PCI_DEVICE_ID_ATI_RAGE128_PF ? > + 0x03fffc00 : 0xfffffc00); > + s->regs.default_offset = data; > + break; > + case DEFAULT_PITCH: > + if (s->dev_id == PCI_DEVICE_ID_ATI_RAGE128_PF) { > + s->regs.default_pitch = data & 0x103ff; > + } > + break; > + case DEFAULT_SC_BOTTOM_RIGHT: > + s->regs.default_sc_bottom_right = data & 0x3fff3fff; > + break; > + default: > + break; > + } > +} > + > +static const MemoryRegionOps ati_mm_ops = { > + .read = ati_mm_read, > + .write = ati_mm_write, > + .endianness = DEVICE_LITTLE_ENDIAN, > +}; > + > +static void ati_vga_realize(PCIDevice *dev, Error **errp) > +{ > + ATIVGAState *s = ATI_VGA(dev); > + VGACommonState *vga = &s->vga; > + > + if (s->model) { > + int i; > + for (i = 0; i < ARRAY_SIZE(ati_model_aliases); i++) { > + if (!strcmp(s->model, ati_model_aliases[i].name)) { > + s->dev_id = ati_model_aliases[i].dev_id; > + break; > + } > + } > + if (i >= ARRAY_SIZE(ati_model_aliases)) { > + warn_report("Unknown ATI VGA model name, " > + "using default rage128p"); > + } > + } > + if (s->dev_id != PCI_DEVICE_ID_ATI_RAGE128_PF && > + s->dev_id != PCI_DEVICE_ID_ATI_RADEON_QY) { > + error_setg(errp, "Unknown ATI VGA device id, " > + "only 0x5046 and 0x5159 are supported"); > + return; > + } > + pci_set_word(dev->config + PCI_DEVICE_ID, s->dev_id); > + > + if (s->dev_id == PCI_DEVICE_ID_ATI_RADEON_QY && > + s->vga.vram_size_mb < 16) { > + warn_report("Too small video memory for device id"); > + s->vga.vram_size_mb = 16; > + } > + > + /* init vga bits */ > + vga_common_init(vga, OBJECT(s)); > + vga_init(vga, OBJECT(s), pci_address_space(dev), > + pci_address_space_io(dev), true); > + vga->con = graphic_console_init(DEVICE(s), 0, s->vga.hw_ops, &s->vga); > + if (s->cursor_guest_mode) { > + vga->cursor_invalidate = ati_cursor_invalidate; > + vga->cursor_draw_line = ati_cursor_draw_line; > + } > + > + /* mmio register space */ > + memory_region_init_io(&s->mm, OBJECT(s), &ati_mm_ops, s, > + "ati.mmregs", 0x4000); > + /* io space is alias to beginning of mmregs */ > + memory_region_init_alias(&s->io, OBJECT(s), "ati.io", &s->mm, 0, 0x100); > + > + pci_register_bar(dev, 0, PCI_BASE_ADDRESS_MEM_PREFETCH, &vga->vram); > + pci_register_bar(dev, 1, PCI_BASE_ADDRESS_SPACE_IO, &s->io); > + pci_register_bar(dev, 2, PCI_BASE_ADDRESS_SPACE_MEMORY, &s->mm); > +} > + > +static void ati_vga_reset(DeviceState *dev) > +{ > + ATIVGAState *s = ATI_VGA(dev); > + > + /* reset vga */ > + vga_common_reset(&s->vga); > + s->mode = VGA_MODE; > +} > + > +static void ati_vga_exit(PCIDevice *dev) > +{ > + ATIVGAState *s = ATI_VGA(dev); > + > + graphic_console_close(s->vga.con); > +} > + > +static Property ati_vga_properties[] = { > + DEFINE_PROP_UINT32("vgamem_mb", ATIVGAState, vga.vram_size_mb, 16), > + DEFINE_PROP_STRING("model", ATIVGAState, model), > + DEFINE_PROP_UINT16("x-device-id", ATIVGAState, dev_id, > + PCI_DEVICE_ID_ATI_RAGE128_PF), > + DEFINE_PROP_BOOL("guest_hwcursor", ATIVGAState, cursor_guest_mode, false), > + DEFINE_PROP_END_OF_LIST() > +}; > + > +static void ati_vga_class_init(ObjectClass *klass, void *data) > +{ > + DeviceClass *dc = DEVICE_CLASS(klass); > + PCIDeviceClass *k = PCI_DEVICE_CLASS(klass); > + > + dc->reset = ati_vga_reset; > + dc->props = ati_vga_properties; > + dc->hotpluggable = false; > + set_bit(DEVICE_CATEGORY_DISPLAY, dc->categories); > + > + k->class_id = PCI_CLASS_DISPLAY_VGA; > + k->vendor_id = PCI_VENDOR_ID_ATI; > + k->device_id = PCI_DEVICE_ID_ATI_RAGE128_PF; > + k->romfile = "vgabios-stdvga.bin"; > + k->realize = ati_vga_realize; > + k->exit = ati_vga_exit; > +} > + > +static const TypeInfo ati_vga_info = { > + .name = TYPE_ATI_VGA, > + .parent = TYPE_PCI_DEVICE, > + .instance_size = sizeof(ATIVGAState), > + .class_init = ati_vga_class_init, > + .interfaces = (InterfaceInfo[]) { > + { INTERFACE_CONVENTIONAL_PCI_DEVICE }, > + { }, > + }, > +}; > + > +static void ati_vga_register_types(void) > +{ > + type_register_static(&ati_vga_info); > +} > + > +type_init(ati_vga_register_types) > diff --git a/hw/display/ati_2d.c b/hw/display/ati_2d.c > new file mode 100644 > index 000000000000..bc98ba6eebf6 > --- /dev/null > +++ b/hw/display/ati_2d.c > @@ -0,0 +1,167 @@ > +/* > + * QEMU ATI SVGA emulation > + * 2D engine functions > + * > + * Copyright (c) 2019 BALATON Zoltan > + * > + * This work is licensed under the GNU GPL license version 2 or later. > + */ > + > +#include "ati_int.h" > +#include "ati_regs.h" > +#include "qemu/log.h" > +#include "ui/pixel_ops.h" > + > +/* > + * NOTE: > + * This is 2D _acceleration_ and supposed to be fast. Therefore, don't try to > + * reinvent the wheel (unlikely to get better with a naive implementation than > + * existing libraries) and avoid (poorly) reimplementing gfx primitives. > + * That is unnecessary and would become a performance problem. Instead, try to > + * map to and reuse existing optimised facilities (e.g. pixman) wherever > + * possible. > + */ > + > +static int ati_bpp_from_datatype(ATIVGAState *s) > +{ > + switch (s->regs.dp_datatype & 0xf) { > + case 2: > + return 8; > + case 3: > + case 4: > + return 16; > + case 5: > + return 24; > + case 6: > + return 32; > + default: > + qemu_log_mask(LOG_UNIMP, "Unknown dst datatype %d\n", > + s->regs.dp_datatype & 0xf); > + return 0; > + } > +} > + > +void ati_2d_blt(ATIVGAState *s) > +{ > + /* FIXME it is probably more complex than this and may need to be */ > + /* rewritten but for now as a start just to get some output: */ > + DisplaySurface *ds = qemu_console_surface(s->vga.con); > + DPRINTF("%p %u ds: %p %d %d rop: %x\n", s->vga.vram_ptr, > + s->vga.vbe_start_addr, surface_data(ds), surface_stride(ds), > + surface_bits_per_pixel(ds), > + (s->regs.dp_mix & GMC_ROP3_MASK) >> 16); > + DPRINTF("%d %d, %d %d, (%d,%d) -> (%d,%d) %dx%d\n", s->regs.src_offset, > + s->regs.dst_offset, s->regs.src_pitch, s->regs.dst_pitch, > + s->regs.src_x, s->regs.src_y, s->regs.dst_x, s->regs.dst_y, > + s->regs.dst_width, s->regs.dst_height); > + switch (s->regs.dp_mix & GMC_ROP3_MASK) { > + case ROP3_SRCCOPY: > + { > + uint8_t *src_bits, *dst_bits, *end; > + int src_stride, dst_stride, bpp = ati_bpp_from_datatype(s); > + src_bits = s->vga.vram_ptr + s->regs.src_offset; > + dst_bits = s->vga.vram_ptr + s->regs.dst_offset; > + src_stride = s->regs.src_pitch; > + dst_stride = s->regs.dst_pitch; > + > + if (s->dev_id == PCI_DEVICE_ID_ATI_RAGE128_PF) { > + src_bits += s->regs.crtc_offset & 0x07ffffff; > + dst_bits += s->regs.crtc_offset & 0x07ffffff; > + src_stride *= bpp; > + dst_stride *= bpp; > + } > + src_stride /= sizeof(uint32_t); > + dst_stride /= sizeof(uint32_t); > + > + DPRINTF("pixman_blt(%p, %p, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d)\n", > + src_bits, dst_bits, src_stride, dst_stride, bpp, bpp, > + s->regs.src_x, s->regs.src_y, s->regs.dst_x, s->regs.dst_y, > + s->regs.dst_width, s->regs.dst_height); > + end = s->vga.vram_ptr + s->vga.vram_size; > + if (src_bits >= end || dst_bits >= end || > + src_bits + (s->regs.src_y + s->regs.dst_height) * src_stride + > + s->regs.src_x >= end || > + dst_bits + (s->regs.dst_y + s->regs.dst_height) * dst_stride + > + s->regs.dst_x >= end) { > + qemu_log_mask(LOG_UNIMP, "blt outside vram not implemented\n"); > + return; > + } > + pixman_blt((uint32_t *)src_bits, (uint32_t *)dst_bits, > + src_stride, dst_stride, bpp, bpp, > + s->regs.src_x, s->regs.src_y, > + s->regs.dst_x, s->regs.dst_y, > + s->regs.dst_width, s->regs.dst_height); > + if (dst_bits >= s->vga.vram_ptr + s->vga.vbe_start_addr && > + dst_bits < s->vga.vram_ptr + s->vga.vbe_start_addr + > + s->vga.vbe_regs[VBE_DISPI_INDEX_YRES] * s->vga.vbe_line_offset) { > + memory_region_set_dirty(&s->vga.vram, s->vga.vbe_start_addr + > + s->regs.dst_offset + > + s->regs.dst_y * surface_stride(ds), > + s->regs.dst_height * surface_stride(ds)); > + } > + s->regs.dst_x += s->regs.dst_width; > + s->regs.dst_y += s->regs.dst_height; > + break; > + } > + case ROP3_PATCOPY: > + case ROP3_BLACKNESS: > + case ROP3_WHITENESS: > + { > + uint8_t *dst_bits, *end; > + int dst_stride, bpp = ati_bpp_from_datatype(s); > + uint32_t filler = 0; > + dst_bits = s->vga.vram_ptr + s->regs.dst_offset; > + dst_stride = s->regs.dst_pitch; > + > + if (s->dev_id == PCI_DEVICE_ID_ATI_RAGE128_PF) { > + dst_bits += s->regs.crtc_offset & 0x07ffffff; > + dst_stride *= bpp; > + } > + dst_stride /= sizeof(uint32_t); > + > + switch (s->regs.dp_mix & GMC_ROP3_MASK) { > + case ROP3_PATCOPY: > + filler = bswap32(s->regs.dp_brush_frgd_clr); > + break; > + case ROP3_BLACKNESS: > + filler = rgb_to_pixel32(s->vga.palette[0], s->vga.palette[1], > + s->vga.palette[2]) << 8 | 0xff; > + break; > + case ROP3_WHITENESS: > + filler = rgb_to_pixel32(s->vga.palette[3], s->vga.palette[4], > + s->vga.palette[5]) << 8 | 0xff; > + break; > + } > + > + DPRINTF("pixman_fill(%p, %d, %d, %d, %d, %d, %d, %x)\n", > + dst_bits, dst_stride, bpp, > + s->regs.dst_x, s->regs.dst_y, > + s->regs.dst_width, s->regs.dst_height, > + filler); > + end = s->vga.vram_ptr + s->vga.vram_size; > + if (dst_bits >= end || > + dst_bits + (s->regs.dst_y + s->regs.dst_height) * dst_stride + > + s->regs.dst_x >= end) { > + qemu_log_mask(LOG_UNIMP, "blt outside vram not implemented\n"); > + return; > + } > + pixman_fill((uint32_t *)dst_bits, dst_stride, bpp, > + s->regs.dst_x, s->regs.dst_y, > + s->regs.dst_width, s->regs.dst_height, > + filler); > + if (dst_bits >= s->vga.vram_ptr + s->vga.vbe_start_addr && > + dst_bits < s->vga.vram_ptr + s->vga.vbe_start_addr + > + s->vga.vbe_regs[VBE_DISPI_INDEX_YRES] * s->vga.vbe_line_offset) { > + memory_region_set_dirty(&s->vga.vram, s->vga.vbe_start_addr + > + s->regs.dst_offset + > + s->regs.dst_y * surface_stride(ds), > + s->regs.dst_height * surface_stride(ds)); > + } > + s->regs.dst_y += s->regs.dst_height; > + break; > + } > + default: > + qemu_log_mask(LOG_UNIMP, "Unimplemented ati_2d blt op %x\n", > + (s->regs.dp_mix & GMC_ROP3_MASK) >> 16); > + } > +} > diff --git a/hw/display/ati_dbg.c b/hw/display/ati_dbg.c > new file mode 100644 > index 000000000000..1e6c32624e5a > --- /dev/null > +++ b/hw/display/ati_dbg.c > @@ -0,0 +1,259 @@ > +#include "ati_int.h" > + > +#ifdef DEBUG_ATI > +struct ati_regdesc { > + const char *name; > + int num; > +}; > + > +static struct ati_regdesc ati_reg_names[] = { > + {"MM_INDEX", 0x0000}, > + {"MM_DATA", 0x0004}, > + {"CLOCK_CNTL_INDEX", 0x0008}, > + {"CLOCK_CNTL_DATA", 0x000c}, > + {"BIOS_0_SCRATCH", 0x0010}, > + {"BUS_CNTL", 0x0030}, > + {"BUS_CNTL1", 0x0034}, > + {"GEN_INT_CNTL", 0x0040}, > + {"CRTC_GEN_CNTL", 0x0050}, > + {"CRTC_EXT_CNTL", 0x0054}, > + {"DAC_CNTL", 0x0058}, > + {"GPIO_MONID", 0x0068}, > + {"I2C_CNTL_1", 0x0094}, > + {"PALETTE_INDEX", 0x00b0}, > + {"PALETTE_DATA", 0x00b4}, > + {"CNFG_CNTL", 0x00e0}, > + {"GEN_RESET_CNTL", 0x00f0}, > + {"CNFG_MEMSIZE", 0x00f8}, > + {"MEM_CNTL", 0x0140}, > + {"MC_FB_LOCATION", 0x0148}, > + {"MC_AGP_LOCATION", 0x014C}, > + {"MC_STATUS", 0x0150}, > + {"MEM_POWER_MISC", 0x015c}, > + {"AGP_BASE", 0x0170}, > + {"AGP_CNTL", 0x0174}, > + {"AGP_APER_OFFSET", 0x0178}, > + {"PCI_GART_PAGE", 0x017c}, > + {"PC_NGUI_MODE", 0x0180}, > + {"PC_NGUI_CTLSTAT", 0x0184}, > + {"MPP_TB_CONFIG", 0x01C0}, > + {"MPP_GP_CONFIG", 0x01C8}, > + {"VIPH_CONTROL", 0x01D0}, > + {"CRTC_H_TOTAL_DISP", 0x0200}, > + {"CRTC_H_SYNC_STRT_WID", 0x0204}, > + {"CRTC_V_TOTAL_DISP", 0x0208}, > + {"CRTC_V_SYNC_STRT_WID", 0x020c}, > + {"CRTC_VLINE_CRNT_VLINE", 0x0210}, > + {"CRTC_CRNT_FRAME", 0x0214}, > + {"CRTC_GUI_TRIG_VLINE", 0x0218}, > + {"CRTC_OFFSET", 0x0224}, > + {"CRTC_OFFSET_CNTL", 0x0228}, > + {"CRTC_PITCH", 0x022c}, > + {"OVR_CLR", 0x0230}, > + {"OVR_WID_LEFT_RIGHT", 0x0234}, > + {"OVR_WID_TOP_BOTTOM", 0x0238}, > + {"CUR_OFFSET", 0x0260}, > + {"CUR_HORZ_VERT_POSN", 0x0264}, > + {"CUR_HORZ_VERT_OFF", 0x0268}, > + {"CUR_CLR0", 0x026c}, > + {"CUR_CLR1", 0x0270}, > + {"LVDS_GEN_CNTL", 0x02d0}, > + {"DDA_CONFIG", 0x02e0}, > + {"DDA_ON_OFF", 0x02e4}, > + {"VGA_DDA_CONFIG", 0x02e8}, > + {"VGA_DDA_ON_OFF", 0x02ec}, > + {"CRTC2_H_TOTAL_DISP", 0x0300}, > + {"CRTC2_H_SYNC_STRT_WID", 0x0304}, > + {"CRTC2_V_TOTAL_DISP", 0x0308}, > + {"CRTC2_V_SYNC_STRT_WID", 0x030c}, > + {"CRTC2_VLINE_CRNT_VLINE", 0x0310}, > + {"CRTC2_CRNT_FRAME", 0x0314}, > + {"CRTC2_GUI_TRIG_VLINE", 0x0318}, > + {"CRTC2_OFFSET", 0x0324}, > + {"CRTC2_OFFSET_CNTL", 0x0328}, > + {"CRTC2_PITCH", 0x032c}, > + {"DDA2_CONFIG", 0x03e0}, > + {"DDA2_ON_OFF", 0x03e4}, > + {"CRTC2_GEN_CNTL", 0x03f8}, > + {"CRTC2_STATUS", 0x03fc}, > + {"OV0_SCALE_CNTL", 0x0420}, > + {"SUBPIC_CNTL", 0x0540}, > + {"PM4_BUFFER_OFFSET", 0x0700}, > + {"PM4_BUFFER_CNTL", 0x0704}, > + {"PM4_BUFFER_WM_CNTL", 0x0708}, > + {"PM4_BUFFER_DL_RPTR_ADDR", 0x070c}, > + {"PM4_BUFFER_DL_RPTR", 0x0710}, > + {"PM4_BUFFER_DL_WPTR", 0x0714}, > + {"PM4_VC_FPU_SETUP", 0x071c}, > + {"PM4_FPU_CNTL", 0x0720}, > + {"PM4_VC_FORMAT", 0x0724}, > + {"PM4_VC_CNTL", 0x0728}, > + {"PM4_VC_I01", 0x072c}, > + {"PM4_VC_VLOFF", 0x0730}, > + {"PM4_VC_VLSIZE", 0x0734}, > + {"PM4_IW_INDOFF", 0x0738}, > + {"PM4_IW_INDSIZE", 0x073c}, > + {"PM4_FPU_FPX0", 0x0740}, > + {"PM4_FPU_FPY0", 0x0744}, > + {"PM4_FPU_FPX1", 0x0748}, > + {"PM4_FPU_FPY1", 0x074c}, > + {"PM4_FPU_FPX2", 0x0750}, > + {"PM4_FPU_FPY2", 0x0754}, > + {"PM4_FPU_FPY3", 0x0758}, > + {"PM4_FPU_FPY4", 0x075c}, > + {"PM4_FPU_FPY5", 0x0760}, > + {"PM4_FPU_FPY6", 0x0764}, > + {"PM4_FPU_FPR", 0x0768}, > + {"PM4_FPU_FPG", 0x076c}, > + {"PM4_FPU_FPB", 0x0770}, > + {"PM4_FPU_FPA", 0x0774}, > + {"PM4_FPU_INTXY0", 0x0780}, > + {"PM4_FPU_INTXY1", 0x0784}, > + {"PM4_FPU_INTXY2", 0x0788}, > + {"PM4_FPU_INTARGB", 0x078c}, > + {"PM4_FPU_FPTWICEAREA", 0x0790}, > + {"PM4_FPU_DMAJOR01", 0x0794}, > + {"PM4_FPU_DMAJOR12", 0x0798}, > + {"PM4_FPU_DMAJOR02", 0x079c}, > + {"PM4_FPU_STAT", 0x07a0}, > + {"PM4_STAT", 0x07b8}, > + {"PM4_TEST_CNTL", 0x07d0}, > + {"PM4_MICROCODE_ADDR", 0x07d4}, > + {"PM4_MICROCODE_RADDR", 0x07d8}, > + {"PM4_MICROCODE_DATAH", 0x07dc}, > + {"PM4_MICROCODE_DATAL", 0x07e0}, > + {"PM4_CMDFIFO_ADDR", 0x07e4}, > + {"PM4_CMDFIFO_DATAH", 0x07e8}, > + {"PM4_CMDFIFO_DATAL", 0x07ec}, > + {"PM4_BUFFER_ADDR", 0x07f0}, > + {"PM4_BUFFER_DATAH", 0x07f4}, > + {"PM4_BUFFER_DATAL", 0x07f8}, > + {"PM4_MICRO_CNTL", 0x07fc}, > + {"CAP0_TRIG_CNTL", 0x0950}, > + {"CAP1_TRIG_CNTL", 0x09c0}, > + {"RBBM_STATUS", 0x0e40}, > + {"PM4_FIFO_DATA_EVEN", 0x1000}, > + {"PM4_FIFO_DATA_ODD", 0x1004}, > + {"DST_OFFSET", 0x1404}, > + {"DST_PITCH", 0x1408}, > + {"DST_WIDTH", 0x140c}, > + {"DST_HEIGHT", 0x1410}, > + {"SRC_X", 0x1414}, > + {"SRC_Y", 0x1418}, > + {"DST_X", 0x141c}, > + {"DST_Y", 0x1420}, > + {"SRC_PITCH_OFFSET", 0x1428}, > + {"DST_PITCH_OFFSET", 0x142c}, > + {"SRC_Y_X", 0x1434}, > + {"DST_Y_X", 0x1438}, > + {"DST_HEIGHT_WIDTH", 0x143c}, > + {"DP_GUI_MASTER_CNTL", 0x146c}, > + {"BRUSH_SCALE", 0x1470}, > + {"BRUSH_Y_X", 0x1474}, > + {"DP_BRUSH_BKGD_CLR", 0x1478}, > + {"DP_BRUSH_FRGD_CLR", 0x147c}, > + {"DST_WIDTH_X", 0x1588}, > + {"DST_HEIGHT_WIDTH_8", 0x158c}, > + {"SRC_X_Y", 0x1590}, > + {"DST_X_Y", 0x1594}, > + {"DST_WIDTH_HEIGHT", 0x1598}, > + {"DST_WIDTH_X_INCY", 0x159c}, > + {"DST_HEIGHT_Y", 0x15a0}, > + {"DST_X_SUB", 0x15a4}, > + {"DST_Y_SUB", 0x15a8}, > + {"SRC_OFFSET", 0x15ac}, > + {"SRC_PITCH", 0x15b0}, > + {"DST_HEIGHT_WIDTH_BW", 0x15b4}, > + {"CLR_CMP_CNTL", 0x15c0}, > + {"CLR_CMP_CLR_SRC", 0x15c4}, > + {"CLR_CMP_CLR_DST", 0x15c8}, > + {"CLR_CMP_MASK", 0x15cc}, > + {"DP_SRC_FRGD_CLR", 0x15d8}, > + {"DP_SRC_BKGD_CLR", 0x15dc}, > + {"DST_BRES_ERR", 0x1628}, > + {"DST_BRES_INC", 0x162c}, > + {"DST_BRES_DEC", 0x1630}, > + {"DST_BRES_LNTH", 0x1634}, > + {"DST_BRES_LNTH_SUB", 0x1638}, > + {"SC_LEFT", 0x1640}, > + {"SC_RIGHT", 0x1644}, > + {"SC_TOP", 0x1648}, > + {"SC_BOTTOM", 0x164c}, > + {"SRC_SC_RIGHT", 0x1654}, > + {"SRC_SC_BOTTOM", 0x165c}, > + {"GUI_DEBUG0", 0x16a0}, > + {"GUI_DEBUG1", 0x16a4}, > + {"GUI_TIMEOUT", 0x16b0}, > + {"GUI_TIMEOUT0", 0x16b4}, > + {"GUI_TIMEOUT1", 0x16b8}, > + {"GUI_PROBE", 0x16bc}, > + {"DP_CNTL", 0x16c0}, > + {"DP_DATATYPE", 0x16c4}, > + {"DP_MIX", 0x16c8}, > + {"DP_WRITE_MASK", 0x16cc}, > + {"DP_CNTL_XDIR_YDIR_YMAJOR", 0x16d0}, > + {"DEFAULT_OFFSET", 0x16e0}, > + {"DEFAULT_PITCH", 0x16e4}, > + {"DEFAULT_SC_BOTTOM_RIGHT", 0x16e8}, > + {"SC_TOP_LEFT", 0x16ec}, > + {"SC_BOTTOM_RIGHT", 0x16f0}, > + {"SRC_SC_BOTTOM_RIGHT", 0x16f4}, > + {"DST_TILE", 0x1700}, > + {"WAIT_UNTIL", 0x1720}, > + {"CACHE_CNTL", 0x1724}, > + {"GUI_STAT", 0x1740}, > + {"PC_GUI_MODE", 0x1744}, > + {"PC_GUI_CTLSTAT", 0x1748}, > + {"PC_DEBUG_MODE", 0x1760}, > + {"BRES_DST_ERR_DEC", 0x1780}, > + {"TRAIL_BRES_T12_ERR_DEC", 0x1784}, > + {"TRAIL_BRES_T12_INC", 0x1788}, > + {"DP_T12_CNTL", 0x178c}, > + {"DST_BRES_T1_LNTH", 0x1790}, > + {"DST_BRES_T2_LNTH", 0x1794}, > + {"SCALE_SRC_HEIGHT_WIDTH", 0x1994}, > + {"SCALE_OFFSET_0", 0x1998}, > + {"SCALE_PITCH", 0x199c}, > + {"SCALE_X_INC", 0x19a0}, > + {"SCALE_Y_INC", 0x19a4}, > + {"SCALE_HACC", 0x19a8}, > + {"SCALE_VACC", 0x19ac}, > + {"SCALE_DST_X_Y", 0x19b0}, > + {"SCALE_DST_HEIGHT_WIDTH", 0x19b4}, > + {"SCALE_3D_CNTL", 0x1a00}, > + {"SCALE_3D_DATATYPE", 0x1a20}, > + {"SETUP_CNTL", 0x1bc4}, > + {"SOLID_COLOR", 0x1bc8}, > + {"WINDOW_XY_OFFSET", 0x1bcc}, > + {"DRAW_LINE_POINT", 0x1bd0}, > + {"SETUP_CNTL_PM4", 0x1bd4}, > + {"DST_PITCH_OFFSET_C", 0x1c80}, > + {"DP_GUI_MASTER_CNTL_C", 0x1c84}, > + {"SC_TOP_LEFT_C", 0x1c88}, > + {"SC_BOTTOM_RIGHT_C", 0x1c8c}, > + {"CLR_CMP_MASK_3D", 0x1A28}, > + {"MISC_3D_STATE_CNTL_REG", 0x1CA0}, > + {"MC_SRC1_CNTL", 0x19D8}, > + {"TEX_CNTL", 0x1800}, > + {"RAGE128_MPP_TB_CONFIG", 0x01c0}, > + {NULL, -1} > +}; > + > +const char *ati_reg_name(int num) > +{ > + int i; > + > + num &= ~3; > + for (i = 0; ati_reg_names[i].name; i++) { > + if (ati_reg_names[i].num == num) { > + return ati_reg_names[i].name; > + } > + } > + return "unknown"; > +} > +#else > +const char *ati_reg_name(int num) > +{ > + return ""; > +} > +#endif > diff --git a/vl.c b/vl.c > index 4c5cc0d8ad91..4ab7fb37534d 100644 > --- a/vl.c > +++ b/vl.c > @@ -240,6 +240,7 @@ static struct { > { .driver = "vmware-svga", .flag = &default_vga }, > { .driver = "qxl-vga", .flag = &default_vga }, > { .driver = "virtio-vga", .flag = &default_vga }, > + { .driver = "ati-vga", .flag = &default_vga }, > }; > > static QemuOptsList qemu_rtc_opts = { > diff --git a/default-configs/pci.mak b/default-configs/pci.mak > index 037636fa3364..e59e2fa7b6fb 100644 > --- a/default-configs/pci.mak > +++ b/default-configs/pci.mak > @@ -49,3 +49,4 @@ CONFIG_IVSHMEM_DEVICE=$(CONFIG_IVSHMEM) > CONFIG_ROCKER=y > CONFIG_VFIO=$(CONFIG_LINUX) > CONFIG_VFIO_PCI=y > +CONFIG_ATI_VGA=y > diff --git a/hw/display/Makefile.objs b/hw/display/Makefile.objs > index 7c4ae9a0fd0a..963c23f3c8f5 100644 > --- a/hw/display/Makefile.objs > +++ b/hw/display/Makefile.objs > @@ -53,3 +53,5 @@ virtio-gpu-3d.o-cflags := $(VIRGL_CFLAGS) > virtio-gpu-3d.o-libs += $(VIRGL_LIBS) > obj-$(CONFIG_DPCD) += dpcd.o > obj-$(CONFIG_XLNX_ZYNQMP_ARM) += xlnx_dp.o > + > +obj-$(CONFIG_ATI_VGA) += ati.o ati_2d.o ati_dbg.o > diff --git a/hw/display/trace-events b/hw/display/trace-events > index 37d3264bb2e6..80993cc4d913 100644 > --- a/hw/display/trace-events > +++ b/hw/display/trace-events > @@ -138,3 +138,7 @@ vga_cirrus_write_blt(uint32_t offset, uint32_t val) "offset 0x%x, val 0x%x" > sii9022_read_reg(uint8_t addr, uint8_t val) "addr 0x%02x, val 0x%02x" > sii9022_write_reg(uint8_t addr, uint8_t val) "addr 0x%02x, val 0x%02x" > sii9022_switch_mode(const char *mode) "mode: %s" > + > +# hw/display/ati*.c > +ati_mm_read(unsigned int size, uint64_t addr, const char *name, uint64_t val) "%u 0x%"HWADDR_PRIx " %s -> 0x%"PRIx64 > +ati_mm_write(unsigned int size, uint64_t addr, const char *name, uint64_t val) "%u 0x%"HWADDR_PRIx " %s <- 0x%"PRIx64 > ^ permalink raw reply [flat|nested] 9+ messages in thread
* [Qemu-devel] [PULL 2/5] mips_fulong2e: Add on-board graphics chip 2019-03-08 12:39 [Qemu-devel] [PULL 0/5] Vga 20190308 patches Gerd Hoffmann 2019-03-08 12:39 ` [Qemu-devel] [PULL 1/5] hw/display: Add basic ATI VGA emulation Gerd Hoffmann @ 2019-03-08 12:39 ` Gerd Hoffmann 2019-03-08 12:39 ` [Qemu-devel] [PULL 3/5] virtio: add class_size to VirtioPCIDeviceTypeInfo Gerd Hoffmann ` (3 subsequent siblings) 5 siblings, 0 replies; 9+ messages in thread From: Gerd Hoffmann @ 2019-03-08 12:39 UTC (permalink / raw) To: qemu-devel Cc: Paolo Bonzini, Marcel Apfelbaum, Aleksandar Markovic, Aurelien Jarno, Aleksandar Rikalo, Michael S. Tsirkin, Gerd Hoffmann, BALATON Zoltan From: BALATON Zoltan <balaton@eik.bme.hu> Add (partial) emulation of the on-board GPU of the machine. This allows the PMON2000 firmware to run and should also work with Linux console but probably not with X yet. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Message-Id: <12a45041a9a5ae863bf04edf3875aa9d25c481a3.1551902740.git.balaton@eik.bme.hu> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> --- hw/mips/mips_fulong2e.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/hw/mips/mips_fulong2e.c b/hw/mips/mips_fulong2e.c index fbbc543eede5..f87769376608 100644 --- a/hw/mips/mips_fulong2e.c +++ b/hw/mips/mips_fulong2e.c @@ -287,6 +287,7 @@ static void mips_fulong2e_init(MachineState *machine) I2CBus *smbus; MIPSCPU *cpu; CPUMIPSState *env; + DeviceState *dev; /* init CPUs */ cpu = MIPS_CPU(cpu_create(machine->cpu_type)); @@ -347,6 +348,11 @@ static void mips_fulong2e_init(MachineState *machine) vt82c686b_southbridge_init(pci_bus, FULONG2E_VIA_SLOT, env->irq[5], &smbus, &isa_bus); + /* GPU */ + dev = DEVICE(pci_create(pci_bus, -1, "ati-vga")); + qdev_prop_set_uint16(dev, "x-device-id", 0x5159); + qdev_init_nofail(dev); + /* Populate SPD eeprom data */ spd_data = spd_data_generate(DDR, ram_size, &err); if (err) { -- 2.18.1 ^ permalink raw reply related [flat|nested] 9+ messages in thread
* [Qemu-devel] [PULL 3/5] virtio: add class_size to VirtioPCIDeviceTypeInfo 2019-03-08 12:39 [Qemu-devel] [PULL 0/5] Vga 20190308 patches Gerd Hoffmann 2019-03-08 12:39 ` [Qemu-devel] [PULL 1/5] hw/display: Add basic ATI VGA emulation Gerd Hoffmann 2019-03-08 12:39 ` [Qemu-devel] [PULL 2/5] mips_fulong2e: Add on-board graphics chip Gerd Hoffmann @ 2019-03-08 12:39 ` Gerd Hoffmann 2019-03-08 12:39 ` [Qemu-devel] [PULL 4/5] virtio-vga: fix reset Gerd Hoffmann ` (2 subsequent siblings) 5 siblings, 0 replies; 9+ messages in thread From: Gerd Hoffmann @ 2019-03-08 12:39 UTC (permalink / raw) To: qemu-devel Cc: Paolo Bonzini, Marcel Apfelbaum, Aleksandar Markovic, Aurelien Jarno, Aleksandar Rikalo, Michael S. Tsirkin, Gerd Hoffmann Needed when VirtioPCIClass subclasses have their own class struct with some extra fields. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 20190307080244.9011-2-kraxel@redhat.com --- hw/virtio/virtio-pci.h | 1 + hw/virtio/virtio-pci.c | 1 + 2 files changed, 2 insertions(+) diff --git a/hw/virtio/virtio-pci.h b/hw/virtio/virtio-pci.h index bd223a6e3b0b..18581854cae1 100644 --- a/hw/virtio/virtio-pci.h +++ b/hw/virtio/virtio-pci.h @@ -230,6 +230,7 @@ typedef struct VirtioPCIDeviceTypeInfo { /* Same as TypeInfo fields: */ size_t instance_size; + size_t class_size; void (*instance_init)(Object *obj); void (*class_init)(ObjectClass *klass, void *data); } VirtioPCIDeviceTypeInfo; diff --git a/hw/virtio/virtio-pci.c b/hw/virtio/virtio-pci.c index e978bfe76048..cb44e19b6789 100644 --- a/hw/virtio/virtio-pci.c +++ b/hw/virtio/virtio-pci.c @@ -1935,6 +1935,7 @@ void virtio_pci_types_register(const VirtioPCIDeviceTypeInfo *t) .parent = t->parent ? t->parent : TYPE_VIRTIO_PCI, .instance_size = t->instance_size, .instance_init = t->instance_init, + .class_size = t->class_size, .class_init = virtio_pci_base_class_init, .class_data = (void *)t, .abstract = true, -- 2.18.1 ^ permalink raw reply related [flat|nested] 9+ messages in thread
* [Qemu-devel] [PULL 4/5] virtio-vga: fix reset. 2019-03-08 12:39 [Qemu-devel] [PULL 0/5] Vga 20190308 patches Gerd Hoffmann ` (2 preceding siblings ...) 2019-03-08 12:39 ` [Qemu-devel] [PULL 3/5] virtio: add class_size to VirtioPCIDeviceTypeInfo Gerd Hoffmann @ 2019-03-08 12:39 ` Gerd Hoffmann 2019-03-08 12:39 ` [Qemu-devel] [PULL 5/5] virtio-gpu: make virtio_gpu_reset static Gerd Hoffmann 2019-03-09 14:42 ` [Qemu-devel] [PULL 0/5] Vga 20190308 patches Peter Maydell 5 siblings, 0 replies; 9+ messages in thread From: Gerd Hoffmann @ 2019-03-08 12:39 UTC (permalink / raw) To: qemu-devel Cc: Paolo Bonzini, Marcel Apfelbaum, Aleksandar Markovic, Aurelien Jarno, Aleksandar Rikalo, Michael S. Tsirkin, Gerd Hoffmann Store reset handler of the parent class and just call that for a complete virtio reset. When taking the shortcut and calling virtio_gpu_reset() directly the generic virtio reset code (for virtqueues etc) will not be executed. Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1597621 Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 20190307080244.9011-3-kraxel@redhat.com --- hw/display/virtio-vga.c | 17 +++++++++++++++-- 1 file changed, 15 insertions(+), 2 deletions(-) diff --git a/hw/display/virtio-vga.c b/hw/display/virtio-vga.c index 1e48009b74a6..a2b803b75f94 100644 --- a/hw/display/virtio-vga.c +++ b/hw/display/virtio-vga.c @@ -12,6 +12,10 @@ #define TYPE_VIRTIO_VGA "virtio-vga" #define VIRTIO_VGA(obj) \ OBJECT_CHECK(VirtIOVGA, (obj), TYPE_VIRTIO_VGA) +#define VIRTIO_VGA_GET_CLASS(obj) \ + OBJECT_GET_CLASS(VirtIOVGAClass, obj, TYPE_VIRTIO_VGA) +#define VIRTIO_VGA_CLASS(klass) \ + OBJECT_CLASS_CHECK(VirtIOVGAClass, klass, TYPE_VIRTIO_VGA) typedef struct VirtIOVGA { VirtIOPCIProxy parent_obj; @@ -20,6 +24,11 @@ typedef struct VirtIOVGA { MemoryRegion vga_mrs[3]; } VirtIOVGA; +typedef struct VirtIOVGAClass { + VirtioPCIClass parent_class; + DeviceReset parent_reset; +} VirtIOVGAClass; + static void virtio_vga_invalidate_display(void *opaque) { VirtIOVGA *vvga = opaque; @@ -168,10 +177,11 @@ static void virtio_vga_realize(VirtIOPCIProxy *vpci_dev, Error **errp) static void virtio_vga_reset(DeviceState *dev) { + VirtIOVGAClass *klass = VIRTIO_VGA_GET_CLASS(dev); VirtIOVGA *vvga = VIRTIO_VGA(dev); /* reset virtio-gpu */ - virtio_gpu_reset(VIRTIO_DEVICE(&vvga->vdev)); + klass->parent_reset(dev); /* reset vga */ vga_common_reset(&vvga->vga); @@ -187,13 +197,15 @@ static void virtio_vga_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); VirtioPCIClass *k = VIRTIO_PCI_CLASS(klass); + VirtIOVGAClass *v = VIRTIO_VGA_CLASS(klass); PCIDeviceClass *pcidev_k = PCI_DEVICE_CLASS(klass); set_bit(DEVICE_CATEGORY_DISPLAY, dc->categories); dc->props = virtio_vga_properties; - dc->reset = virtio_vga_reset; dc->vmsd = &vmstate_virtio_vga; dc->hotpluggable = false; + device_class_set_parent_reset(dc, virtio_vga_reset, + &v->parent_reset); k->realize = virtio_vga_realize; pcidev_k->romfile = "vgabios-virtio.bin"; @@ -212,6 +224,7 @@ static VirtioPCIDeviceTypeInfo virtio_vga_info = { .generic_name = TYPE_VIRTIO_VGA, .instance_size = sizeof(struct VirtIOVGA), .instance_init = virtio_vga_inst_initfn, + .class_size = sizeof(struct VirtIOVGAClass), .class_init = virtio_vga_class_init, }; -- 2.18.1 ^ permalink raw reply related [flat|nested] 9+ messages in thread
* [Qemu-devel] [PULL 5/5] virtio-gpu: make virtio_gpu_reset static 2019-03-08 12:39 [Qemu-devel] [PULL 0/5] Vga 20190308 patches Gerd Hoffmann ` (3 preceding siblings ...) 2019-03-08 12:39 ` [Qemu-devel] [PULL 4/5] virtio-vga: fix reset Gerd Hoffmann @ 2019-03-08 12:39 ` Gerd Hoffmann 2019-03-09 14:42 ` [Qemu-devel] [PULL 0/5] Vga 20190308 patches Peter Maydell 5 siblings, 0 replies; 9+ messages in thread From: Gerd Hoffmann @ 2019-03-08 12:39 UTC (permalink / raw) To: qemu-devel Cc: Paolo Bonzini, Marcel Apfelbaum, Aleksandar Markovic, Aurelien Jarno, Aleksandar Rikalo, Michael S. Tsirkin, Gerd Hoffmann Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 20190307080244.9011-4-kraxel@redhat.com --- include/hw/virtio/virtio-gpu.h | 1 - hw/display/virtio-gpu.c | 2 +- 2 files changed, 1 insertion(+), 2 deletions(-) diff --git a/include/hw/virtio/virtio-gpu.h b/include/hw/virtio/virtio-gpu.h index 98504f907583..ce0ca7217175 100644 --- a/include/hw/virtio/virtio-gpu.h +++ b/include/hw/virtio/virtio-gpu.h @@ -148,7 +148,6 @@ extern const GraphicHwOps virtio_gpu_ops; } while (0) /* virtio-gpu.c */ -void virtio_gpu_reset(VirtIODevice *vdev); void virtio_gpu_ctrl_response(VirtIOGPU *g, struct virtio_gpu_ctrl_command *cmd, struct virtio_gpu_ctrl_hdr *resp, diff --git a/hw/display/virtio-gpu.c b/hw/display/virtio-gpu.c index a3627f58a9dd..4dbf48e42482 100644 --- a/hw/display/virtio-gpu.c +++ b/hw/display/virtio-gpu.c @@ -1346,7 +1346,7 @@ static void virtio_gpu_instance_init(Object *obj) { } -void virtio_gpu_reset(VirtIODevice *vdev) +static void virtio_gpu_reset(VirtIODevice *vdev) { VirtIOGPU *g = VIRTIO_GPU(vdev); struct virtio_gpu_simple_resource *res, *tmp; -- 2.18.1 ^ permalink raw reply related [flat|nested] 9+ messages in thread
* Re: [Qemu-devel] [PULL 0/5] Vga 20190308 patches 2019-03-08 12:39 [Qemu-devel] [PULL 0/5] Vga 20190308 patches Gerd Hoffmann ` (4 preceding siblings ...) 2019-03-08 12:39 ` [Qemu-devel] [PULL 5/5] virtio-gpu: make virtio_gpu_reset static Gerd Hoffmann @ 2019-03-09 14:42 ` Peter Maydell 2019-03-11 13:33 ` Paolo Bonzini 5 siblings, 1 reply; 9+ messages in thread From: Peter Maydell @ 2019-03-09 14:42 UTC (permalink / raw) To: Gerd Hoffmann Cc: QEMU Developers, Michael S. Tsirkin, Aleksandar Rikalo, Aleksandar Markovic, Paolo Bonzini, Aurelien Jarno On Fri, 8 Mar 2019 at 12:42, Gerd Hoffmann <kraxel@redhat.com> wrote: > > The following changes since commit 32694e98b8d7a246345448a8f707d2e11d6c65e2: > > Merge remote-tracking branch 'remotes/ehabkost/tags/machine-next-pull-request' into staging (2019-03-06 18:52:19 +0000) > > are available in the Git repository at: > > git://git.kraxel.org/qemu tags/vga-20190308-pull-request > > for you to fetch changes up to 61dbd9eaa1450f94886fb41366e4687d405c52c8: > > virtio-gpu: make virtio_gpu_reset static (2019-03-08 09:36:23 +0100) > > ---------------------------------------------------------------- > vga: virtio reset fix, add ati emulation. > > ---------------------------------------------------------------- Hi -- I'm afraid this has conflicted with the Kconfig merge: CONFLICT (modify/delete): default-configs/pci.mak deleted in HEAD and modified in remotes/kraxel/tags/vga-20190308-pull-request. Can you figure out what the Kconfig equivalent of the pci.mak change is and resend, please? thanks -- PMM ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [Qemu-devel] [PULL 0/5] Vga 20190308 patches 2019-03-09 14:42 ` [Qemu-devel] [PULL 0/5] Vga 20190308 patches Peter Maydell @ 2019-03-11 13:33 ` Paolo Bonzini 0 siblings, 0 replies; 9+ messages in thread From: Paolo Bonzini @ 2019-03-11 13:33 UTC (permalink / raw) To: Peter Maydell, Gerd Hoffmann Cc: QEMU Developers, Michael S. Tsirkin, Aleksandar Rikalo, Aleksandar Markovic, Aurelien Jarno On 09/03/19 15:42, Peter Maydell wrote: > On Fri, 8 Mar 2019 at 12:42, Gerd Hoffmann <kraxel@redhat.com> wrote: >> >> The following changes since commit 32694e98b8d7a246345448a8f707d2e11d6c65e2: >> >> Merge remote-tracking branch 'remotes/ehabkost/tags/machine-next-pull-request' into staging (2019-03-06 18:52:19 +0000) >> >> are available in the Git repository at: >> >> git://git.kraxel.org/qemu tags/vga-20190308-pull-request >> >> for you to fetch changes up to 61dbd9eaa1450f94886fb41366e4687d405c52c8: >> >> virtio-gpu: make virtio_gpu_reset static (2019-03-08 09:36:23 +0100) >> >> ---------------------------------------------------------------- >> vga: virtio reset fix, add ati emulation. >> >> ---------------------------------------------------------------- > > Hi -- I'm afraid this has conflicted with the Kconfig merge: > > CONFLICT (modify/delete): default-configs/pci.mak deleted in HEAD and > modified in remotes/kraxel/tags/vga-20190308-pull-request. > > Can you figure out what the Kconfig equivalent of the > pci.mak change is and resend, please? Should be: config ATI_VGA bool default y if PCI_DEVICES depends on PCI select VGA Paolo ^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2019-03-11 13:34 UTC | newest] Thread overview: 9+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2019-03-08 12:39 [Qemu-devel] [PULL 0/5] Vga 20190308 patches Gerd Hoffmann 2019-03-08 12:39 ` [Qemu-devel] [PULL 1/5] hw/display: Add basic ATI VGA emulation Gerd Hoffmann 2019-03-08 16:16 ` BALATON Zoltan 2019-03-08 12:39 ` [Qemu-devel] [PULL 2/5] mips_fulong2e: Add on-board graphics chip Gerd Hoffmann 2019-03-08 12:39 ` [Qemu-devel] [PULL 3/5] virtio: add class_size to VirtioPCIDeviceTypeInfo Gerd Hoffmann 2019-03-08 12:39 ` [Qemu-devel] [PULL 4/5] virtio-vga: fix reset Gerd Hoffmann 2019-03-08 12:39 ` [Qemu-devel] [PULL 5/5] virtio-gpu: make virtio_gpu_reset static Gerd Hoffmann 2019-03-09 14:42 ` [Qemu-devel] [PULL 0/5] Vga 20190308 patches Peter Maydell 2019-03-11 13:33 ` Paolo Bonzini
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).