From: Cornelia Huck <cohuck@redhat.com> To: Peter Maydell <peter.maydell@linaro.org> Cc: qemu-s390x@nongnu.org, qemu-devel@nongnu.org, David Hildenbrand <david@redhat.com>, Cornelia Huck <cohuck@redhat.com> Subject: [Qemu-devel] [PULL 18/19] s390x/kvm: Configure page size after memory has actually been initialized Date: Thu, 25 Apr 2019 15:21:33 +0200 [thread overview] Message-ID: <20190425132134.2839-19-cohuck@redhat.com> (raw) In-Reply-To: <20190425132134.2839-1-cohuck@redhat.com> From: David Hildenbrand <david@redhat.com> Right now we configure the pagesize quite early, when initializing KVM. This is long before system memory is actually allocated via memory_region_allocate_system_memory(), and therefore memory backends marked as mapped. Instead, let's configure the maximum page size after initializing memory in s390_memory_init(). cap_hpage_1m is still properly configured before creating any CPUs, and therefore before configuring the CPU model and eventually enabling CMMA. This is not a fix but rather a preparation for the future, when initial memory might reside on memory backends (not the case for s390x right now) We will replace qemu_getrampagesize() soon by a function that will always return the maximum page size (not the minimum page size, which only works by pure luck so far, as there are no memory backends). Acked-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20190417113143.5551-2-david@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com> --- hw/s390x/s390-virtio-ccw.c | 12 ++++++++++++ target/s390x/cpu.c | 7 +++++++ target/s390x/cpu.h | 1 + target/s390x/kvm-stub.c | 4 ++++ target/s390x/kvm.c | 35 ++++++++++++++--------------------- target/s390x/kvm_s390x.h | 1 + 6 files changed, 39 insertions(+), 21 deletions(-) diff --git a/hw/s390x/s390-virtio-ccw.c b/hw/s390x/s390-virtio-ccw.c index d11069b860b4..3be567965736 100644 --- a/hw/s390x/s390-virtio-ccw.c +++ b/hw/s390x/s390-virtio-ccw.c @@ -15,6 +15,7 @@ #include "cpu.h" #include "hw/boards.h" #include "exec/address-spaces.h" +#include "exec/ram_addr.h" #include "hw/s390x/s390-virtio-hcall.h" #include "hw/s390x/sclp.h" #include "hw/s390x/s390_flic.h" @@ -163,6 +164,7 @@ static void s390_memory_init(ram_addr_t mem_size) MemoryRegion *sysmem = get_system_memory(); ram_addr_t chunk, offset = 0; unsigned int number = 0; + Error *local_err = NULL; gchar *name; /* allocate RAM for core */ @@ -182,6 +184,15 @@ static void s390_memory_init(ram_addr_t mem_size) } g_free(name); + /* + * Configure the maximum page size. As no memory devices were created + * yet, this is the page size of initial memory only. + */ + s390_set_max_pagesize(qemu_getrampagesize(), &local_err); + if (local_err) { + error_report_err(local_err); + exit(EXIT_FAILURE); + } /* Initialize storage key device */ s390_skeys_init(); /* Initialize storage attributes device */ @@ -253,6 +264,7 @@ static void ccw_init(MachineState *machine) DeviceState *dev; s390_sclp_init(); + /* init memory + setup max page size. Required for the CPU model */ s390_memory_init(machine->ram_size); /* init CPUs (incl. CPU model) early so s390_has_feature() works */ diff --git a/target/s390x/cpu.c b/target/s390x/cpu.c index 698dd9cb82ab..b58ef0a8ef62 100644 --- a/target/s390x/cpu.c +++ b/target/s390x/cpu.c @@ -399,6 +399,13 @@ int s390_set_memory_limit(uint64_t new_limit, uint64_t *hw_limit) return 0; } +void s390_set_max_pagesize(uint64_t pagesize, Error **errp) +{ + if (kvm_enabled()) { + kvm_s390_set_max_pagesize(pagesize, errp); + } +} + void s390_cmma_reset(void) { if (kvm_enabled()) { diff --git a/target/s390x/cpu.h b/target/s390x/cpu.h index d8990c405a5d..7305cacc7b77 100644 --- a/target/s390x/cpu.h +++ b/target/s390x/cpu.h @@ -734,6 +734,7 @@ static inline void s390_do_cpu_load_normal(CPUState *cs, run_on_cpu_data arg) /* cpu.c */ void s390_crypto_reset(void); int s390_set_memory_limit(uint64_t new_limit, uint64_t *hw_limit); +void s390_set_max_pagesize(uint64_t pagesize, Error **errp); void s390_cmma_reset(void); void s390_enable_css_support(S390CPU *cpu); int s390_assign_subch_ioeventfd(EventNotifier *notifier, uint32_t sch_id, diff --git a/target/s390x/kvm-stub.c b/target/s390x/kvm-stub.c index bf7795e47a1c..22b4514ca68c 100644 --- a/target/s390x/kvm-stub.c +++ b/target/s390x/kvm-stub.c @@ -93,6 +93,10 @@ int kvm_s390_set_mem_limit(uint64_t new_limit, uint64_t *hw_limit) return 0; } +void kvm_s390_set_max_pagesize(uint64_t pagesize, Error **errp) +{ +} + void kvm_s390_crypto_reset(void) { } diff --git a/target/s390x/kvm.c b/target/s390x/kvm.c index 2c6e35b5aafe..7df7be4a1bdc 100644 --- a/target/s390x/kvm.c +++ b/target/s390x/kvm.c @@ -283,44 +283,37 @@ void kvm_s390_crypto_reset(void) } } -static int kvm_s390_configure_mempath_backing(KVMState *s) +void kvm_s390_set_max_pagesize(uint64_t pagesize, Error **errp) { - size_t path_psize = qemu_getrampagesize(); - - if (path_psize == 4 * KiB) { - return 0; + if (pagesize == 4 * KiB) { + return; } if (!hpage_1m_allowed()) { - error_report("This QEMU machine does not support huge page " - "mappings"); - return -EINVAL; + error_setg(errp, "This QEMU machine does not support huge page " + "mappings"); + return; } - if (path_psize != 1 * MiB) { - error_report("Memory backing with 2G pages was specified, " - "but KVM does not support this memory backing"); - return -EINVAL; + if (pagesize != 1 * MiB) { + error_setg(errp, "Memory backing with 2G pages was specified, " + "but KVM does not support this memory backing"); + return; } - if (kvm_vm_enable_cap(s, KVM_CAP_S390_HPAGE_1M, 0)) { - error_report("Memory backing with 1M pages was specified, " - "but KVM does not support this memory backing"); - return -EINVAL; + if (kvm_vm_enable_cap(kvm_state, KVM_CAP_S390_HPAGE_1M, 0)) { + error_setg(errp, "Memory backing with 1M pages was specified, " + "but KVM does not support this memory backing"); + return; } cap_hpage_1m = 1; - return 0; } int kvm_arch_init(MachineState *ms, KVMState *s) { MachineClass *mc = MACHINE_GET_CLASS(ms); - if (kvm_s390_configure_mempath_backing(s)) { - return -EINVAL; - } - mc->default_cpu_type = S390_CPU_TYPE_NAME("host"); cap_sync_regs = kvm_check_extension(s, KVM_CAP_SYNC_REGS); cap_async_pf = kvm_check_extension(s, KVM_CAP_ASYNC_PF); diff --git a/target/s390x/kvm_s390x.h b/target/s390x/kvm_s390x.h index 6e52287da3f0..caf985955ba5 100644 --- a/target/s390x/kvm_s390x.h +++ b/target/s390x/kvm_s390x.h @@ -36,6 +36,7 @@ int kvm_s390_cmma_active(void); void kvm_s390_cmma_reset(void); void kvm_s390_reset_vcpu(S390CPU *cpu); int kvm_s390_set_mem_limit(uint64_t new_limit, uint64_t *hw_limit); +void kvm_s390_set_max_pagesize(uint64_t pagesize, Error **errp); void kvm_s390_crypto_reset(void); void kvm_s390_restart_interrupt(S390CPU *cpu); void kvm_s390_stop_interrupt(S390CPU *cpu); -- 2.17.2
WARNING: multiple messages have this Message-ID (diff)
From: Cornelia Huck <cohuck@redhat.com> To: Peter Maydell <peter.maydell@linaro.org> Cc: qemu-s390x@nongnu.org, Cornelia Huck <cohuck@redhat.com>, qemu-devel@nongnu.org, David Hildenbrand <david@redhat.com> Subject: [Qemu-devel] [PULL 18/19] s390x/kvm: Configure page size after memory has actually been initialized Date: Thu, 25 Apr 2019 15:21:33 +0200 [thread overview] Message-ID: <20190425132134.2839-19-cohuck@redhat.com> (raw) Message-ID: <20190425132133.weBmln72V1sKAJMMAELpFR8VX7Uv7HXzVwS3EoPz4HI@z> (raw) In-Reply-To: <20190425132134.2839-1-cohuck@redhat.com> From: David Hildenbrand <david@redhat.com> Right now we configure the pagesize quite early, when initializing KVM. This is long before system memory is actually allocated via memory_region_allocate_system_memory(), and therefore memory backends marked as mapped. Instead, let's configure the maximum page size after initializing memory in s390_memory_init(). cap_hpage_1m is still properly configured before creating any CPUs, and therefore before configuring the CPU model and eventually enabling CMMA. This is not a fix but rather a preparation for the future, when initial memory might reside on memory backends (not the case for s390x right now) We will replace qemu_getrampagesize() soon by a function that will always return the maximum page size (not the minimum page size, which only works by pure luck so far, as there are no memory backends). Acked-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20190417113143.5551-2-david@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com> --- hw/s390x/s390-virtio-ccw.c | 12 ++++++++++++ target/s390x/cpu.c | 7 +++++++ target/s390x/cpu.h | 1 + target/s390x/kvm-stub.c | 4 ++++ target/s390x/kvm.c | 35 ++++++++++++++--------------------- target/s390x/kvm_s390x.h | 1 + 6 files changed, 39 insertions(+), 21 deletions(-) diff --git a/hw/s390x/s390-virtio-ccw.c b/hw/s390x/s390-virtio-ccw.c index d11069b860b4..3be567965736 100644 --- a/hw/s390x/s390-virtio-ccw.c +++ b/hw/s390x/s390-virtio-ccw.c @@ -15,6 +15,7 @@ #include "cpu.h" #include "hw/boards.h" #include "exec/address-spaces.h" +#include "exec/ram_addr.h" #include "hw/s390x/s390-virtio-hcall.h" #include "hw/s390x/sclp.h" #include "hw/s390x/s390_flic.h" @@ -163,6 +164,7 @@ static void s390_memory_init(ram_addr_t mem_size) MemoryRegion *sysmem = get_system_memory(); ram_addr_t chunk, offset = 0; unsigned int number = 0; + Error *local_err = NULL; gchar *name; /* allocate RAM for core */ @@ -182,6 +184,15 @@ static void s390_memory_init(ram_addr_t mem_size) } g_free(name); + /* + * Configure the maximum page size. As no memory devices were created + * yet, this is the page size of initial memory only. + */ + s390_set_max_pagesize(qemu_getrampagesize(), &local_err); + if (local_err) { + error_report_err(local_err); + exit(EXIT_FAILURE); + } /* Initialize storage key device */ s390_skeys_init(); /* Initialize storage attributes device */ @@ -253,6 +264,7 @@ static void ccw_init(MachineState *machine) DeviceState *dev; s390_sclp_init(); + /* init memory + setup max page size. Required for the CPU model */ s390_memory_init(machine->ram_size); /* init CPUs (incl. CPU model) early so s390_has_feature() works */ diff --git a/target/s390x/cpu.c b/target/s390x/cpu.c index 698dd9cb82ab..b58ef0a8ef62 100644 --- a/target/s390x/cpu.c +++ b/target/s390x/cpu.c @@ -399,6 +399,13 @@ int s390_set_memory_limit(uint64_t new_limit, uint64_t *hw_limit) return 0; } +void s390_set_max_pagesize(uint64_t pagesize, Error **errp) +{ + if (kvm_enabled()) { + kvm_s390_set_max_pagesize(pagesize, errp); + } +} + void s390_cmma_reset(void) { if (kvm_enabled()) { diff --git a/target/s390x/cpu.h b/target/s390x/cpu.h index d8990c405a5d..7305cacc7b77 100644 --- a/target/s390x/cpu.h +++ b/target/s390x/cpu.h @@ -734,6 +734,7 @@ static inline void s390_do_cpu_load_normal(CPUState *cs, run_on_cpu_data arg) /* cpu.c */ void s390_crypto_reset(void); int s390_set_memory_limit(uint64_t new_limit, uint64_t *hw_limit); +void s390_set_max_pagesize(uint64_t pagesize, Error **errp); void s390_cmma_reset(void); void s390_enable_css_support(S390CPU *cpu); int s390_assign_subch_ioeventfd(EventNotifier *notifier, uint32_t sch_id, diff --git a/target/s390x/kvm-stub.c b/target/s390x/kvm-stub.c index bf7795e47a1c..22b4514ca68c 100644 --- a/target/s390x/kvm-stub.c +++ b/target/s390x/kvm-stub.c @@ -93,6 +93,10 @@ int kvm_s390_set_mem_limit(uint64_t new_limit, uint64_t *hw_limit) return 0; } +void kvm_s390_set_max_pagesize(uint64_t pagesize, Error **errp) +{ +} + void kvm_s390_crypto_reset(void) { } diff --git a/target/s390x/kvm.c b/target/s390x/kvm.c index 2c6e35b5aafe..7df7be4a1bdc 100644 --- a/target/s390x/kvm.c +++ b/target/s390x/kvm.c @@ -283,44 +283,37 @@ void kvm_s390_crypto_reset(void) } } -static int kvm_s390_configure_mempath_backing(KVMState *s) +void kvm_s390_set_max_pagesize(uint64_t pagesize, Error **errp) { - size_t path_psize = qemu_getrampagesize(); - - if (path_psize == 4 * KiB) { - return 0; + if (pagesize == 4 * KiB) { + return; } if (!hpage_1m_allowed()) { - error_report("This QEMU machine does not support huge page " - "mappings"); - return -EINVAL; + error_setg(errp, "This QEMU machine does not support huge page " + "mappings"); + return; } - if (path_psize != 1 * MiB) { - error_report("Memory backing with 2G pages was specified, " - "but KVM does not support this memory backing"); - return -EINVAL; + if (pagesize != 1 * MiB) { + error_setg(errp, "Memory backing with 2G pages was specified, " + "but KVM does not support this memory backing"); + return; } - if (kvm_vm_enable_cap(s, KVM_CAP_S390_HPAGE_1M, 0)) { - error_report("Memory backing with 1M pages was specified, " - "but KVM does not support this memory backing"); - return -EINVAL; + if (kvm_vm_enable_cap(kvm_state, KVM_CAP_S390_HPAGE_1M, 0)) { + error_setg(errp, "Memory backing with 1M pages was specified, " + "but KVM does not support this memory backing"); + return; } cap_hpage_1m = 1; - return 0; } int kvm_arch_init(MachineState *ms, KVMState *s) { MachineClass *mc = MACHINE_GET_CLASS(ms); - if (kvm_s390_configure_mempath_backing(s)) { - return -EINVAL; - } - mc->default_cpu_type = S390_CPU_TYPE_NAME("host"); cap_sync_regs = kvm_check_extension(s, KVM_CAP_SYNC_REGS); cap_async_pf = kvm_check_extension(s, KVM_CAP_ASYNC_PF); diff --git a/target/s390x/kvm_s390x.h b/target/s390x/kvm_s390x.h index 6e52287da3f0..caf985955ba5 100644 --- a/target/s390x/kvm_s390x.h +++ b/target/s390x/kvm_s390x.h @@ -36,6 +36,7 @@ int kvm_s390_cmma_active(void); void kvm_s390_cmma_reset(void); void kvm_s390_reset_vcpu(S390CPU *cpu); int kvm_s390_set_mem_limit(uint64_t new_limit, uint64_t *hw_limit); +void kvm_s390_set_max_pagesize(uint64_t pagesize, Error **errp); void kvm_s390_crypto_reset(void); void kvm_s390_restart_interrupt(S390CPU *cpu); void kvm_s390_stop_interrupt(S390CPU *cpu); -- 2.17.2
next prev parent reply other threads:[~2019-04-25 13:22 UTC|newest] Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-04-25 13:21 [Qemu-devel] [PULL 00/19] first batch of s390x patches for 4.1 Cornelia Huck 2019-04-25 13:21 ` Cornelia Huck 2019-04-25 13:21 ` [Qemu-devel] [PULL 01/19] s390 vfio-ccw: Add bootindex property and IPLB data Cornelia Huck 2019-04-25 13:21 ` Cornelia Huck 2019-04-30 16:54 ` Peter Maydell 2019-04-30 16:54 ` Peter Maydell 2019-04-30 20:30 ` Eduardo Habkost 2019-04-30 20:30 ` Eduardo Habkost 2019-05-02 15:48 ` Cornelia Huck 2019-05-02 15:48 ` Cornelia Huck 2019-04-25 13:21 ` [Qemu-devel] [PULL 02/19] s390-bios: decouple cio setup from virtio Cornelia Huck 2019-04-25 13:21 ` Cornelia Huck 2019-04-25 13:21 ` [Qemu-devel] [PULL 03/19] s390-bios: decouple common boot logic " Cornelia Huck 2019-04-25 13:21 ` Cornelia Huck 2019-04-25 13:21 ` [Qemu-devel] [PULL 04/19] s390-bios: Clean up cio.h Cornelia Huck 2019-04-25 13:21 ` Cornelia Huck 2019-04-25 13:21 ` [Qemu-devel] [PULL 05/19] s390-bios: Decouple channel i/o logic from virtio Cornelia Huck 2019-04-25 13:21 ` Cornelia Huck 2019-04-25 13:21 ` [Qemu-devel] [PULL 06/19] s390-bios: Map low core memory Cornelia Huck 2019-04-25 13:21 ` Cornelia Huck 2019-04-25 13:21 ` [Qemu-devel] [PULL 07/19] s390-bios: ptr2u32 and u32toptr Cornelia Huck 2019-04-25 13:21 ` Cornelia Huck 2019-04-25 13:21 ` [Qemu-devel] [PULL 08/19] s390-bios: Support for running format-0/1 channel programs Cornelia Huck 2019-04-25 13:21 ` Cornelia Huck 2019-04-25 13:21 ` [Qemu-devel] [PULL 09/19] s390-bios: cio error handling Cornelia Huck 2019-04-25 13:21 ` Cornelia Huck 2019-04-25 13:21 ` [Qemu-devel] [PULL 10/19] s390-bios: Extend find_dev() for non-virtio devices Cornelia Huck 2019-04-25 13:21 ` Cornelia Huck 2019-04-25 13:21 ` [Qemu-devel] [PULL 11/19] s390-bios: Factor finding boot device out of virtio code path Cornelia Huck 2019-04-25 13:21 ` Cornelia Huck 2019-04-25 13:21 ` [Qemu-devel] [PULL 12/19] s390-bios: Refactor virtio to run channel programs via cio Cornelia Huck 2019-04-25 13:21 ` Cornelia Huck 2019-04-25 13:21 ` [Qemu-devel] [PULL 13/19] s390-bios: Use control unit type to determine boot method Cornelia Huck 2019-04-25 13:21 ` Cornelia Huck 2019-04-25 13:21 ` [Qemu-devel] [PULL 14/19] s390-bios: Add channel command codes/structs needed for dasd-ipl Cornelia Huck 2019-04-25 13:21 ` Cornelia Huck 2019-04-25 13:21 ` [Qemu-devel] [PULL 15/19] s390-bios: Support booting from real dasd device Cornelia Huck 2019-04-25 13:21 ` Cornelia Huck 2019-04-25 13:21 ` [Qemu-devel] [PULL 16/19] s390-bios: Use control unit type to find bootable devices Cornelia Huck 2019-04-25 13:21 ` Cornelia Huck 2019-04-25 13:21 ` [Qemu-devel] [PULL 17/19] pc-bios/s390: Update firmware images Cornelia Huck 2019-04-25 13:21 ` Cornelia Huck 2019-04-25 13:21 ` Cornelia Huck [this message] 2019-04-25 13:21 ` [Qemu-devel] [PULL 18/19] s390x/kvm: Configure page size after memory has actually been initialized Cornelia Huck 2019-04-25 13:21 ` [Qemu-devel] [PULL 19/19] exec: Introduce qemu_maxrampagesize() and rename qemu_getrampagesize() Cornelia Huck 2019-04-25 13:21 ` Cornelia Huck 2019-04-26 13:29 ` [Qemu-devel] [PULL 00/19] first batch of s390x patches for 4.1 Peter Maydell 2019-04-26 13:29 ` Peter Maydell
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20190425132134.2839-19-cohuck@redhat.com \ --to=cohuck@redhat.com \ --cc=david@redhat.com \ --cc=peter.maydell@linaro.org \ --cc=qemu-devel@nongnu.org \ --cc=qemu-s390x@nongnu.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).