[Qemu-devel] [PULL 14/42] target/arm: Implement v7m_update_fpccr()

[Peter Maydell <peter.maydell@linaro.org>]

Implement the code which updates the FPCCR register on an
exception entry where we are going to use lazy FP stacking.
We have to defer to the NVIC to determine whether the
various exceptions are currently ready or not.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20190416125744.27770-12-peter.maydell@linaro.org
---
 target/arm/cpu.h      | 14 +++++++++
 hw/intc/armv7m_nvic.c | 34 ++++++++++++++++++++++
 target/arm/helper.c   | 67 ++++++++++++++++++++++++++++++++++++++++++-
 3 files changed, 114 insertions(+), 1 deletion(-)

diff --git a/target/arm/cpu.h b/target/arm/cpu.h
index 67e4e95d440..eb989d773af 100644
--- a/target/arm/cpu.h
+++ b/target/arm/cpu.h
@@ -2044,6 +2044,20 @@ void armv7m_nvic_acknowledge_irq(void *opaque);
  * (Ignoring -1, this is the same as the RETTOBASE value before completion.)
  */
 int armv7m_nvic_complete_irq(void *opaque, int irq, bool secure);
+/**
+ * armv7m_nvic_get_ready_status(void *opaque, int irq, bool secure)
+ * @opaque: the NVIC
+ * @irq: the exception number to mark pending
+ * @secure: false for non-banked exceptions or for the nonsecure
+ * version of a banked exception, true for the secure version of a banked
+ * exception.
+ *
+ * Return whether an exception is "ready", i.e. whether the exception is
+ * enabled and is configured at a priority which would allow it to
+ * interrupt the current execution priority. This controls whether the
+ * RDY bit for it in the FPCCR is set.
+ */
+bool armv7m_nvic_get_ready_status(void *opaque, int irq, bool secure);
 /**
  * armv7m_nvic_raw_execution_priority: return the raw execution priority
  * @opaque: the NVIC
diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c
index 5eb438f5409..53b4631dace 100644
--- a/hw/intc/armv7m_nvic.c
+++ b/hw/intc/armv7m_nvic.c
@@ -746,6 +746,40 @@ int armv7m_nvic_complete_irq(void *opaque, int irq, bool secure)
     return ret;
 }
 
+bool armv7m_nvic_get_ready_status(void *opaque, int irq, bool secure)
+{
+    /*
+     * Return whether an exception is "ready", i.e. it is enabled and is
+     * configured at a priority which would allow it to interrupt the
+     * current execution priority.
+     *
+     * irq and secure have the same semantics as for armv7m_nvic_set_pending():
+     * for non-banked exceptions secure is always false; for banked exceptions
+     * it indicates which of the exceptions is required.
+     */
+    NVICState *s = (NVICState *)opaque;
+    bool banked = exc_is_banked(irq);
+    VecInfo *vec;
+    int running = nvic_exec_prio(s);
+
+    assert(irq > ARMV7M_EXCP_RESET && irq < s->num_irq);
+    assert(!secure || banked);
+
+    /*
+     * HardFault is an odd special case: we always check against -1,
+     * even if we're secure and HardFault has priority -3; we never
+     * need to check for enabled state.
+     */
+    if (irq == ARMV7M_EXCP_HARD) {
+        return running > -1;
+    }
+
+    vec = (banked && secure) ? &s->sec_vectors[irq] : &s->vectors[irq];
+
+    return vec->enabled &&
+        exc_group_prio(s, vec->prio, secure) < running;
+}
+
 /* callback when external interrupt line is changed */
 static void set_irq_level(void *opaque, int n, int level)
 {
diff --git a/target/arm/helper.c b/target/arm/helper.c
index 6e55da5c482..547898581a2 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -8177,6 +8177,71 @@ static void v7m_exception_taken(ARMCPU *cpu, uint32_t lr, bool dotailchain,
     env->thumb = addr & 1;
 }
 
+static void v7m_update_fpccr(CPUARMState *env, uint32_t frameptr,
+                             bool apply_splim)
+{
+    /*
+     * Like the pseudocode UpdateFPCCR: save state in FPCAR and FPCCR
+     * that we will need later in order to do lazy FP reg stacking.
+     */
+    bool is_secure = env->v7m.secure;
+    void *nvic = env->nvic;
+    /*
+     * Some bits are unbanked and live always in fpccr[M_REG_S]; some bits
+     * are banked and we want to update the bit in the bank for the
+     * current security state; and in one case we want to specifically
+     * update the NS banked version of a bit even if we are secure.
+     */
+    uint32_t *fpccr_s = &env->v7m.fpccr[M_REG_S];
+    uint32_t *fpccr_ns = &env->v7m.fpccr[M_REG_NS];
+    uint32_t *fpccr = &env->v7m.fpccr[is_secure];
+    bool hfrdy, bfrdy, mmrdy, ns_ufrdy, s_ufrdy, sfrdy, monrdy;
+
+    env->v7m.fpcar[is_secure] = frameptr & ~0x7;
+
+    if (apply_splim && arm_feature(env, ARM_FEATURE_V8)) {
+        bool splimviol;
+        uint32_t splim = v7m_sp_limit(env);
+        bool ign = armv7m_nvic_neg_prio_requested(nvic, is_secure) &&
+            (env->v7m.ccr[is_secure] & R_V7M_CCR_STKOFHFNMIGN_MASK);
+
+        splimviol = !ign && frameptr < splim;
+        *fpccr = FIELD_DP32(*fpccr, V7M_FPCCR, SPLIMVIOL, splimviol);
+    }
+
+    *fpccr = FIELD_DP32(*fpccr, V7M_FPCCR, LSPACT, 1);
+
+    *fpccr_s = FIELD_DP32(*fpccr_s, V7M_FPCCR, S, is_secure);
+
+    *fpccr = FIELD_DP32(*fpccr, V7M_FPCCR, USER, arm_current_el(env) == 0);
+
+    *fpccr = FIELD_DP32(*fpccr, V7M_FPCCR, THREAD,
+                        !arm_v7m_is_handler_mode(env));
+
+    hfrdy = armv7m_nvic_get_ready_status(nvic, ARMV7M_EXCP_HARD, false);
+    *fpccr_s = FIELD_DP32(*fpccr_s, V7M_FPCCR, HFRDY, hfrdy);
+
+    bfrdy = armv7m_nvic_get_ready_status(nvic, ARMV7M_EXCP_BUS, false);
+    *fpccr_s = FIELD_DP32(*fpccr_s, V7M_FPCCR, BFRDY, bfrdy);
+
+    mmrdy = armv7m_nvic_get_ready_status(nvic, ARMV7M_EXCP_MEM, is_secure);
+    *fpccr = FIELD_DP32(*fpccr, V7M_FPCCR, MMRDY, mmrdy);
+
+    ns_ufrdy = armv7m_nvic_get_ready_status(nvic, ARMV7M_EXCP_USAGE, false);
+    *fpccr_ns = FIELD_DP32(*fpccr_ns, V7M_FPCCR, UFRDY, ns_ufrdy);
+
+    monrdy = armv7m_nvic_get_ready_status(nvic, ARMV7M_EXCP_DEBUG, false);
+    *fpccr_s = FIELD_DP32(*fpccr_s, V7M_FPCCR, MONRDY, monrdy);
+
+    if (arm_feature(env, ARM_FEATURE_M_SECURITY)) {
+        s_ufrdy = armv7m_nvic_get_ready_status(nvic, ARMV7M_EXCP_USAGE, true);
+        *fpccr_s = FIELD_DP32(*fpccr_s, V7M_FPCCR, UFRDY, s_ufrdy);
+
+        sfrdy = armv7m_nvic_get_ready_status(nvic, ARMV7M_EXCP_SECURE, false);
+        *fpccr_s = FIELD_DP32(*fpccr_s, V7M_FPCCR, SFRDY, sfrdy);
+    }
+}
+
 static bool v7m_push_stack(ARMCPU *cpu)
 {
     /* Do the "set up stack frame" part of exception entry,
@@ -8324,7 +8389,7 @@ static bool v7m_push_stack(ARMCPU *cpu)
                 }
             } else {
                 /* Lazy stacking enabled, save necessary info to stack later */
-                /* TODO : equivalent of UpdateFPCCR() pseudocode */
+                v7m_update_fpccr(env, frameptr + 0x20, true);
             }
         }
     }
-- 
2.20.1