From: Peter Maydell <peter.maydell@linaro.org>
To: qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 27/42] target/arm: Implement VLSTM for v7M CPUs with an FPU
Date: Mon, 29 Apr 2019 18:00:15 +0100 [thread overview]
Message-ID: <20190429170030.11323-28-peter.maydell@linaro.org> (raw)
In-Reply-To: <20190429170030.11323-1-peter.maydell@linaro.org>
Implement the VLSTM instruction for v7M for the FPU present case.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190416125744.27770-25-peter.maydell@linaro.org
---
target/arm/cpu.h | 2 +
target/arm/helper.h | 2 +
target/arm/helper.c | 84 ++++++++++++++++++++++++++++++++++++++++++
target/arm/translate.c | 15 +++++++-
4 files changed, 102 insertions(+), 1 deletion(-)
diff --git a/target/arm/cpu.h b/target/arm/cpu.h
index 0b10aefb93d..22bc6e00ab9 100644
--- a/target/arm/cpu.h
+++ b/target/arm/cpu.h
@@ -58,6 +58,8 @@
#define EXCP_INVSTATE 18 /* v7M INVSTATE UsageFault */
#define EXCP_STKOF 19 /* v8M STKOF UsageFault */
#define EXCP_LAZYFP 20 /* v7M fault during lazy FP stacking */
+#define EXCP_LSERR 21 /* v8M LSERR SecureFault */
+#define EXCP_UNALIGNED 22 /* v7M UNALIGNED UsageFault */
/* NB: add new EXCP_ defines to the array in arm_log_exception() too */
#define ARMV7M_EXCP_RESET 1
diff --git a/target/arm/helper.h b/target/arm/helper.h
index 0a3a80528c7..62051ae6d51 100644
--- a/target/arm/helper.h
+++ b/target/arm/helper.h
@@ -71,6 +71,8 @@ DEF_HELPER_3(v7m_tt, i32, env, i32, i32)
DEF_HELPER_1(v7m_preserve_fp_state, void, env)
+DEF_HELPER_2(v7m_vlstm, void, env, i32)
+
DEF_HELPER_2(v8m_stackcheck, void, env, i32)
DEF_HELPER_4(access_check_cp_reg, void, env, ptr, i32, i32)
diff --git a/target/arm/helper.c b/target/arm/helper.c
index b11f8aa14df..b821037c3b6 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -7384,6 +7384,12 @@ void HELPER(v7m_preserve_fp_state)(CPUARMState *env)
g_assert_not_reached();
}
+void HELPER(v7m_vlstm)(CPUARMState *env, uint32_t fptr)
+{
+ /* translate.c should never generate calls here in user-only mode */
+ g_assert_not_reached();
+}
+
uint32_t HELPER(v7m_tt)(CPUARMState *env, uint32_t addr, uint32_t op)
{
/* The TT instructions can be used by unprivileged code, but in
@@ -8400,6 +8406,74 @@ static void v7m_update_fpccr(CPUARMState *env, uint32_t frameptr,
}
}
+void HELPER(v7m_vlstm)(CPUARMState *env, uint32_t fptr)
+{
+ /* fptr is the value of Rn, the frame pointer we store the FP regs to */
+ bool s = env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_S_MASK;
+ bool lspact = env->v7m.fpccr[s] & R_V7M_FPCCR_LSPACT_MASK;
+
+ assert(env->v7m.secure);
+
+ if (!(env->v7m.control[M_REG_S] & R_V7M_CONTROL_SFPA_MASK)) {
+ return;
+ }
+
+ /* Check access to the coprocessor is permitted */
+ if (!v7m_cpacr_pass(env, true, arm_current_el(env) != 0)) {
+ raise_exception_ra(env, EXCP_NOCP, 0, 1, GETPC());
+ }
+
+ if (lspact) {
+ /* LSPACT should not be active when there is active FP state */
+ raise_exception_ra(env, EXCP_LSERR, 0, 1, GETPC());
+ }
+
+ if (fptr & 7) {
+ raise_exception_ra(env, EXCP_UNALIGNED, 0, 1, GETPC());
+ }
+
+ /*
+ * Note that we do not use v7m_stack_write() here, because the
+ * accesses should not set the FSR bits for stacking errors if they
+ * fail. (In pseudocode terms, they are AccType_NORMAL, not AccType_STACK
+ * or AccType_LAZYFP). Faults in cpu_stl_data() will throw exceptions
+ * and longjmp out.
+ */
+ if (!(env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_LSPEN_MASK)) {
+ bool ts = env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_TS_MASK;
+ int i;
+
+ for (i = 0; i < (ts ? 32 : 16); i += 2) {
+ uint64_t dn = *aa32_vfp_dreg(env, i / 2);
+ uint32_t faddr = fptr + 4 * i;
+ uint32_t slo = extract64(dn, 0, 32);
+ uint32_t shi = extract64(dn, 32, 32);
+
+ if (i >= 16) {
+ faddr += 8; /* skip the slot for the FPSCR */
+ }
+ cpu_stl_data(env, faddr, slo);
+ cpu_stl_data(env, faddr + 4, shi);
+ }
+ cpu_stl_data(env, fptr + 0x40, vfp_get_fpscr(env));
+
+ /*
+ * If TS is 0 then s0 to s15 and FPSCR are UNKNOWN; we choose to
+ * leave them unchanged, matching our choice in v7m_preserve_fp_state.
+ */
+ if (ts) {
+ for (i = 0; i < 32; i += 2) {
+ *aa32_vfp_dreg(env, i / 2) = 0;
+ }
+ vfp_set_fpscr(env, 0);
+ }
+ } else {
+ v7m_update_fpccr(env, fptr, false);
+ }
+
+ env->v7m.control[M_REG_S] &= ~R_V7M_CONTROL_FPCA_MASK;
+}
+
static bool v7m_push_stack(ARMCPU *cpu)
{
/* Do the "set up stack frame" part of exception entry,
@@ -9160,6 +9234,8 @@ static void arm_log_exception(int idx)
[EXCP_INVSTATE] = "v7M INVSTATE UsageFault",
[EXCP_STKOF] = "v8M STKOF UsageFault",
[EXCP_LAZYFP] = "v7M exception during lazy FP stacking",
+ [EXCP_LSERR] = "v8M LSERR UsageFault",
+ [EXCP_UNALIGNED] = "v7M UNALIGNED UsageFault",
};
if (idx >= 0 && idx < ARRAY_SIZE(excnames)) {
@@ -9334,6 +9410,14 @@ void arm_v7m_cpu_do_interrupt(CPUState *cs)
armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, env->v7m.secure);
env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_STKOF_MASK;
break;
+ case EXCP_LSERR:
+ armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_SECURE, false);
+ env->v7m.sfsr |= R_V7M_SFSR_LSERR_MASK;
+ break;
+ case EXCP_UNALIGNED:
+ armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, env->v7m.secure);
+ env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_UNALIGNED_MASK;
+ break;
case EXCP_SWI:
/* The PC already points to the next instruction. */
armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_SVC, env->v7m.secure);
diff --git a/target/arm/translate.c b/target/arm/translate.c
index 4f29d09a28a..99b38dd5f2b 100644
--- a/target/arm/translate.c
+++ b/target/arm/translate.c
@@ -11818,7 +11818,20 @@ static void disas_thumb2_insn(DisasContext *s, uint32_t insn)
if (!s->v8m_secure || (insn & 0x0040f0ff)) {
goto illegal_op;
}
- /* Just NOP since FP support is not implemented */
+
+ if (arm_dc_feature(s, ARM_FEATURE_VFP)) {
+ TCGv_i32 fptr = load_reg(s, rn);
+
+ if (extract32(insn, 20, 1)) {
+ /* VLLDM */
+ } else {
+ gen_helper_v7m_vlstm(cpu_env, fptr);
+ }
+ tcg_temp_free_i32(fptr);
+
+ /* End the TB, because we have updated FP control bits */
+ s->base.is_jmp = DISAS_UPDATE;
+ }
break;
}
if (arm_dc_feature(s, ARM_FEATURE_VFP) &&
--
2.20.1
next prev parent reply other threads:[~2019-04-29 17:01 UTC|newest]
Thread overview: 88+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-04-29 16:59 [Qemu-devel] [PULL 00/42] target-arm queue Peter Maydell
2019-04-29 16:59 ` Peter Maydell
2019-04-29 16:59 ` [Qemu-devel] [PULL 01/42] hw/arm/smmuv3: Remove SMMUNotifierNode Peter Maydell
2019-04-29 16:59 ` Peter Maydell
2019-04-29 16:59 ` [Qemu-devel] [PULL 02/42] hw/ssi/xilinx_spips: Avoid variable length array Peter Maydell
2019-04-29 16:59 ` Peter Maydell
2019-04-29 16:59 ` [Qemu-devel] [PULL 03/42] configure: Remove --source-path option Peter Maydell
2019-04-29 16:59 ` Peter Maydell
2019-04-29 16:59 ` [Qemu-devel] [PULL 04/42] target/arm: Make sure M-profile FPSCR RES0 bits are not settable Peter Maydell
2019-04-29 16:59 ` Peter Maydell
2019-04-29 16:59 ` [Qemu-devel] [PULL 05/42] hw/intc/armv7m_nvic: Allow reading of M-profile MVFR* registers Peter Maydell
2019-04-29 16:59 ` Peter Maydell
2019-04-29 16:59 ` [Qemu-devel] [PULL 06/42] target/arm: Implement dummy versions of M-profile FP-related registers Peter Maydell
2019-04-29 16:59 ` Peter Maydell
2019-04-29 16:59 ` [Qemu-devel] [PULL 07/42] target/arm: Disable most VFP sysregs for M-profile Peter Maydell
2019-04-29 16:59 ` Peter Maydell
2019-04-29 16:59 ` [Qemu-devel] [PULL 08/42] target/arm: Honour M-profile FP enable bits Peter Maydell
2019-04-29 16:59 ` Peter Maydell
2019-04-29 16:59 ` [Qemu-devel] [PULL 09/42] target/arm: Decode FP instructions for M profile Peter Maydell
2019-04-29 16:59 ` Peter Maydell
2019-04-29 16:59 ` [Qemu-devel] [PULL 10/42] target/arm: Clear CONTROL_S.SFPA in SG insn if FPU present Peter Maydell
2019-04-29 16:59 ` Peter Maydell
2019-04-29 16:59 ` [Qemu-devel] [PULL 11/42] target/arm: Handle SFPA and FPCA bits in reads and writes of CONTROL Peter Maydell
2019-04-29 16:59 ` Peter Maydell
2019-04-29 17:00 ` [Qemu-devel] [PULL 12/42] target/arm/helper: don't return early for STKOF faults during stacking Peter Maydell
2019-04-29 17:00 ` Peter Maydell
2019-04-29 17:00 ` [Qemu-devel] [PULL 13/42] target/arm: Handle floating point registers in exception entry Peter Maydell
2019-04-29 17:00 ` Peter Maydell
2019-04-29 17:00 ` [Qemu-devel] [PULL 14/42] target/arm: Implement v7m_update_fpccr() Peter Maydell
2019-04-29 17:00 ` Peter Maydell
2019-04-29 17:00 ` [Qemu-devel] [PULL 15/42] target/arm: Clear CONTROL.SFPA in BXNS and BLXNS Peter Maydell
2019-04-29 17:00 ` Peter Maydell
2019-04-29 17:00 ` [Qemu-devel] [PULL 16/42] target/arm: Clean excReturn bits when tail chaining Peter Maydell
2019-04-29 17:00 ` Peter Maydell
2019-04-29 17:00 ` [Qemu-devel] [PULL 17/42] target/arm: Allow for floating point in callee stack integrity check Peter Maydell
2019-04-29 17:00 ` Peter Maydell
2019-04-29 17:00 ` [Qemu-devel] [PULL 18/42] target/arm: Handle floating point registers in exception return Peter Maydell
2019-04-29 17:00 ` Peter Maydell
2019-04-29 17:00 ` [Qemu-devel] [PULL 19/42] target/arm: Move NS TBFLAG from bit 19 to bit 6 Peter Maydell
2019-04-29 17:00 ` Peter Maydell
2019-04-29 17:00 ` [Qemu-devel] [PULL 20/42] target/arm: Overlap VECSTRIDE and XSCALE_CPAR TB flags Peter Maydell
2019-04-29 17:00 ` Peter Maydell
2019-04-29 17:00 ` [Qemu-devel] [PULL 21/42] target/arm: Set FPCCR.S when executing M-profile floating point insns Peter Maydell
2019-04-29 17:00 ` Peter Maydell
2019-04-29 17:00 ` [Qemu-devel] [PULL 22/42] target/arm: Activate M-profile floating point context when FPCCR.ASPEN is set Peter Maydell
2019-04-29 17:00 ` Peter Maydell
2019-04-29 17:00 ` [Qemu-devel] [PULL 23/42] target/arm: New helper function arm_v7m_mmu_idx_all() Peter Maydell
2019-04-29 17:00 ` Peter Maydell
2019-04-29 17:00 ` [Qemu-devel] [PULL 24/42] target/arm: New function armv7m_nvic_set_pending_lazyfp() Peter Maydell
2019-04-29 17:00 ` Peter Maydell
2019-04-29 17:00 ` [Qemu-devel] [PULL 25/42] target/arm: Add lazy-FP-stacking support to v7m_stack_write() Peter Maydell
2019-04-29 17:00 ` Peter Maydell
2019-04-29 17:00 ` [Qemu-devel] [PULL 26/42] target/arm: Implement M-profile lazy FP state preservation Peter Maydell
2019-04-29 17:00 ` Peter Maydell
2019-04-29 17:00 ` Peter Maydell [this message]
2019-04-29 17:00 ` [Qemu-devel] [PULL 27/42] target/arm: Implement VLSTM for v7M CPUs with an FPU Peter Maydell
2019-04-29 17:00 ` [Qemu-devel] [PULL 28/42] target/arm: Implement VLLDM " Peter Maydell
2019-04-29 17:00 ` Peter Maydell
2019-04-29 17:00 ` [Qemu-devel] [PULL 29/42] target/arm: Enable FPU for Cortex-M4 and Cortex-M33 Peter Maydell
2019-04-29 17:00 ` Peter Maydell
2019-04-29 17:00 ` [Qemu-devel] [PULL 30/42] hw/dma: Compile the bcm2835_dma device as common object Peter Maydell
2019-04-29 17:00 ` Peter Maydell
2019-04-29 17:00 ` [Qemu-devel] [PULL 31/42] hw/arm/aspeed: Use TYPE_TMP105/TYPE_PCA9552 instead of hardcoded string Peter Maydell
2019-04-29 17:00 ` Peter Maydell
2019-04-29 17:00 ` [Qemu-devel] [PULL 32/42] hw/arm/nseries: Use TYPE_TMP105 " Peter Maydell
2019-04-29 17:00 ` Peter Maydell
2019-04-29 17:00 ` [Qemu-devel] [PULL 33/42] hw/display/tc6393xb: Remove unused functions Peter Maydell
2019-04-29 17:00 ` Peter Maydell
2019-04-29 17:00 ` [Qemu-devel] [PULL 34/42] hw/devices: Move TC6393XB declarations into a new header Peter Maydell
2019-04-29 17:00 ` Peter Maydell
2019-04-29 17:00 ` [Qemu-devel] [PULL 35/42] hw/devices: Move Blizzard " Peter Maydell
2019-04-29 17:00 ` Peter Maydell
2019-04-29 17:00 ` [Qemu-devel] [PULL 36/42] hw/devices: Move CBus " Peter Maydell
2019-04-29 17:00 ` Peter Maydell
2019-04-29 17:00 ` [Qemu-devel] [PULL 37/42] hw/devices: Move Gamepad " Peter Maydell
2019-04-29 17:00 ` Peter Maydell
2019-04-29 17:00 ` [Qemu-devel] [PULL 38/42] hw/devices: Move TI touchscreen " Peter Maydell
2019-04-29 17:00 ` Peter Maydell
2019-04-29 17:00 ` [Qemu-devel] [PULL 39/42] hw/devices: Move LAN9118 " Peter Maydell
2019-04-29 17:00 ` Peter Maydell
2019-04-29 17:00 ` [Qemu-devel] [PULL 40/42] hw/net/ne2000-isa: Add guards to the header Peter Maydell
2019-04-29 17:00 ` Peter Maydell
2019-04-29 17:00 ` [Qemu-devel] [PULL 41/42] hw/net/lan9118: Export TYPE_LAN9118 and use it instead of hardcoded string Peter Maydell
2019-04-29 17:00 ` Peter Maydell
2019-04-29 17:00 ` [Qemu-devel] [PULL 42/42] hw/devices: Move SMSC 91C111 declaration into a new header Peter Maydell
2019-04-29 17:00 ` Peter Maydell
2019-04-29 18:10 ` [Qemu-devel] [PULL 00/42] target-arm queue Peter Maydell
2019-04-29 18:10 ` Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190429170030.11323-28-peter.maydell@linaro.org \
--to=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).