From: Peter Maydell <peter.maydell@linaro.org>
To: qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 38/42] hw/devices: Move TI touchscreen declarations into a new header
Date: Mon, 29 Apr 2019 18:00:26 +0100 [thread overview]
Message-ID: <20190429170030.11323-39-peter.maydell@linaro.org> (raw)
In-Reply-To: <20190429170030.11323-1-peter.maydell@linaro.org>
From: Philippe Mathieu-Daudé <philmd@redhat.com>
Since uWireSlave is only used in this new header, there is no
need to expose it via "qemu/typedefs.h".
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190412165416.7977-9-philmd@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
include/hw/arm/omap.h | 6 +-----
include/hw/devices.h | 15 ---------------
include/hw/input/tsc2xxx.h | 36 ++++++++++++++++++++++++++++++++++++
include/qemu/typedefs.h | 1 -
hw/arm/nseries.c | 2 +-
hw/arm/palm.c | 2 +-
hw/input/tsc2005.c | 2 +-
hw/input/tsc210x.c | 4 ++--
MAINTAINERS | 2 ++
9 files changed, 44 insertions(+), 26 deletions(-)
create mode 100644 include/hw/input/tsc2xxx.h
diff --git a/include/hw/arm/omap.h b/include/hw/arm/omap.h
index e7fbd340f37..9de867daa46 100644
--- a/include/hw/arm/omap.h
+++ b/include/hw/arm/omap.h
@@ -20,6 +20,7 @@
#include "exec/memory.h"
# define hw_omap_h "omap.h"
#include "hw/irq.h"
+#include "hw/input/tsc2xxx.h"
#include "target/arm/cpu-qom.h"
#include "qemu/log.h"
@@ -679,11 +680,6 @@ qemu_irq *omap_mpuio_in_get(struct omap_mpuio_s *s);
void omap_mpuio_out_set(struct omap_mpuio_s *s, int line, qemu_irq handler);
void omap_mpuio_key(struct omap_mpuio_s *s, int row, int col, int down);
-struct uWireSlave {
- uint16_t (*receive)(void *opaque);
- void (*send)(void *opaque, uint16_t data);
- void *opaque;
-};
struct omap_uwire_s;
void omap_uwire_attach(struct omap_uwire_s *s,
uWireSlave *slave, int chipselect);
diff --git a/include/hw/devices.h b/include/hw/devices.h
index 7a630da47f7..ba9034050b4 100644
--- a/include/hw/devices.h
+++ b/include/hw/devices.h
@@ -4,7 +4,6 @@
/* Devices that have nowhere better to go. */
#include "hw/hw.h"
-#include "ui/console.h"
/* smc91c111.c */
void smc91c111_init(NICInfo *, uint32_t, qemu_irq);
@@ -12,18 +11,4 @@ void smc91c111_init(NICInfo *, uint32_t, qemu_irq);
/* lan9118.c */
void lan9118_init(NICInfo *, uint32_t, qemu_irq);
-/* tsc210x.c */
-uWireSlave *tsc2102_init(qemu_irq pint);
-uWireSlave *tsc2301_init(qemu_irq penirq, qemu_irq kbirq, qemu_irq dav);
-I2SCodec *tsc210x_codec(uWireSlave *chip);
-uint32_t tsc210x_txrx(void *opaque, uint32_t value, int len);
-void tsc210x_set_transform(uWireSlave *chip,
- MouseTransformInfo *info);
-void tsc210x_key_event(uWireSlave *chip, int key, int down);
-
-/* tsc2005.c */
-void *tsc2005_init(qemu_irq pintdav);
-uint32_t tsc2005_txrx(void *opaque, uint32_t value, int len);
-void tsc2005_set_transform(void *opaque, MouseTransformInfo *info);
-
#endif
diff --git a/include/hw/input/tsc2xxx.h b/include/hw/input/tsc2xxx.h
new file mode 100644
index 00000000000..dbfe5c55c1f
--- /dev/null
+++ b/include/hw/input/tsc2xxx.h
@@ -0,0 +1,36 @@
+/*
+ * TI touchscreen controller
+ *
+ * Copyright (c) 2006 Andrzej Zaborowski
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ */
+
+#ifndef HW_INPUT_TSC2XXX_H
+#define HW_INPUT_TSC2XXX_H
+
+#include "hw/irq.h"
+#include "ui/console.h"
+
+typedef struct uWireSlave {
+ uint16_t (*receive)(void *opaque);
+ void (*send)(void *opaque, uint16_t data);
+ void *opaque;
+} uWireSlave;
+
+/* tsc210x.c */
+uWireSlave *tsc2102_init(qemu_irq pint);
+uWireSlave *tsc2301_init(qemu_irq penirq, qemu_irq kbirq, qemu_irq dav);
+I2SCodec *tsc210x_codec(uWireSlave *chip);
+uint32_t tsc210x_txrx(void *opaque, uint32_t value, int len);
+void tsc210x_set_transform(uWireSlave *chip, MouseTransformInfo *info);
+void tsc210x_key_event(uWireSlave *chip, int key, int down);
+
+/* tsc2005.c */
+void *tsc2005_init(qemu_irq pintdav);
+uint32_t tsc2005_txrx(void *opaque, uint32_t value, int len);
+void tsc2005_set_transform(void *opaque, MouseTransformInfo *info);
+
+#endif
diff --git a/include/qemu/typedefs.h b/include/qemu/typedefs.h
index e4a0a656d1c..fcdaae58c44 100644
--- a/include/qemu/typedefs.h
+++ b/include/qemu/typedefs.h
@@ -99,7 +99,6 @@ typedef struct RAMBlock RAMBlock;
typedef struct Range Range;
typedef struct SHPCDevice SHPCDevice;
typedef struct SSIBus SSIBus;
-typedef struct uWireSlave uWireSlave;
typedef struct VirtIODevice VirtIODevice;
typedef struct Visitor Visitor;
typedef void SaveStateHandler(QEMUFile *f, void *opaque);
diff --git a/hw/arm/nseries.c b/hw/arm/nseries.c
index 6889f13d699..303f7a31e1c 100644
--- a/hw/arm/nseries.c
+++ b/hw/arm/nseries.c
@@ -30,8 +30,8 @@
#include "ui/console.h"
#include "hw/boards.h"
#include "hw/i2c/i2c.h"
-#include "hw/devices.h"
#include "hw/display/blizzard.h"
+#include "hw/input/tsc2xxx.h"
#include "hw/misc/cbus.h"
#include "hw/misc/tmp105.h"
#include "hw/block/flash.h"
diff --git a/hw/arm/palm.c b/hw/arm/palm.c
index 285f43709dd..139d27d1cc0 100644
--- a/hw/arm/palm.c
+++ b/hw/arm/palm.c
@@ -26,7 +26,7 @@
#include "hw/arm/omap.h"
#include "hw/boards.h"
#include "hw/arm/arm.h"
-#include "hw/devices.h"
+#include "hw/input/tsc2xxx.h"
#include "hw/loader.h"
#include "exec/address-spaces.h"
#include "cpu.h"
diff --git a/hw/input/tsc2005.c b/hw/input/tsc2005.c
index 2b9108a1932..f82771e7a7c 100644
--- a/hw/input/tsc2005.c
+++ b/hw/input/tsc2005.c
@@ -23,7 +23,7 @@
#include "hw/hw.h"
#include "qemu/timer.h"
#include "ui/console.h"
-#include "hw/devices.h"
+#include "hw/input/tsc2xxx.h"
#include "trace.h"
#define TSC_CUT_RESOLUTION(value, p) ((value) >> (16 - (p ? 12 : 10)))
diff --git a/hw/input/tsc210x.c b/hw/input/tsc210x.c
index 41731619bb6..f94cb4683bf 100644
--- a/hw/input/tsc210x.c
+++ b/hw/input/tsc210x.c
@@ -24,8 +24,8 @@
#include "audio/audio.h"
#include "qemu/timer.h"
#include "ui/console.h"
-#include "hw/arm/omap.h" /* For I2SCodec and uWireSlave */
-#include "hw/devices.h"
+#include "hw/arm/omap.h" /* For I2SCodec */
+#include "hw/input/tsc2xxx.h"
#define TSC_DATA_REGISTERS_PAGE 0x0
#define TSC_CONTROL_REGISTERS_PAGE 0x1
diff --git a/MAINTAINERS b/MAINTAINERS
index 39a3216e1c4..7dd71e0a2d1 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -669,6 +669,7 @@ F: hw/input/tsc2005.c
F: hw/misc/cbus.c
F: hw/timer/twl92230.c
F: include/hw/display/blizzard.h
+F: include/hw/input/tsc2xxx.h
F: include/hw/misc/cbus.h
Palm
@@ -678,6 +679,7 @@ L: qemu-arm@nongnu.org
S: Odd Fixes
F: hw/arm/palm.c
F: hw/input/tsc210x.c
+F: include/hw/input/tsc2xxx.h
Raspberry Pi
M: Peter Maydell <peter.maydell@linaro.org>
--
2.20.1
next prev parent reply other threads:[~2019-04-29 17:01 UTC|newest]
Thread overview: 88+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-04-29 16:59 [Qemu-devel] [PULL 00/42] target-arm queue Peter Maydell
2019-04-29 16:59 ` Peter Maydell
2019-04-29 16:59 ` [Qemu-devel] [PULL 01/42] hw/arm/smmuv3: Remove SMMUNotifierNode Peter Maydell
2019-04-29 16:59 ` Peter Maydell
2019-04-29 16:59 ` [Qemu-devel] [PULL 02/42] hw/ssi/xilinx_spips: Avoid variable length array Peter Maydell
2019-04-29 16:59 ` Peter Maydell
2019-04-29 16:59 ` [Qemu-devel] [PULL 03/42] configure: Remove --source-path option Peter Maydell
2019-04-29 16:59 ` Peter Maydell
2019-04-29 16:59 ` [Qemu-devel] [PULL 04/42] target/arm: Make sure M-profile FPSCR RES0 bits are not settable Peter Maydell
2019-04-29 16:59 ` Peter Maydell
2019-04-29 16:59 ` [Qemu-devel] [PULL 05/42] hw/intc/armv7m_nvic: Allow reading of M-profile MVFR* registers Peter Maydell
2019-04-29 16:59 ` Peter Maydell
2019-04-29 16:59 ` [Qemu-devel] [PULL 06/42] target/arm: Implement dummy versions of M-profile FP-related registers Peter Maydell
2019-04-29 16:59 ` Peter Maydell
2019-04-29 16:59 ` [Qemu-devel] [PULL 07/42] target/arm: Disable most VFP sysregs for M-profile Peter Maydell
2019-04-29 16:59 ` Peter Maydell
2019-04-29 16:59 ` [Qemu-devel] [PULL 08/42] target/arm: Honour M-profile FP enable bits Peter Maydell
2019-04-29 16:59 ` Peter Maydell
2019-04-29 16:59 ` [Qemu-devel] [PULL 09/42] target/arm: Decode FP instructions for M profile Peter Maydell
2019-04-29 16:59 ` Peter Maydell
2019-04-29 16:59 ` [Qemu-devel] [PULL 10/42] target/arm: Clear CONTROL_S.SFPA in SG insn if FPU present Peter Maydell
2019-04-29 16:59 ` Peter Maydell
2019-04-29 16:59 ` [Qemu-devel] [PULL 11/42] target/arm: Handle SFPA and FPCA bits in reads and writes of CONTROL Peter Maydell
2019-04-29 16:59 ` Peter Maydell
2019-04-29 17:00 ` [Qemu-devel] [PULL 12/42] target/arm/helper: don't return early for STKOF faults during stacking Peter Maydell
2019-04-29 17:00 ` Peter Maydell
2019-04-29 17:00 ` [Qemu-devel] [PULL 13/42] target/arm: Handle floating point registers in exception entry Peter Maydell
2019-04-29 17:00 ` Peter Maydell
2019-04-29 17:00 ` [Qemu-devel] [PULL 14/42] target/arm: Implement v7m_update_fpccr() Peter Maydell
2019-04-29 17:00 ` Peter Maydell
2019-04-29 17:00 ` [Qemu-devel] [PULL 15/42] target/arm: Clear CONTROL.SFPA in BXNS and BLXNS Peter Maydell
2019-04-29 17:00 ` Peter Maydell
2019-04-29 17:00 ` [Qemu-devel] [PULL 16/42] target/arm: Clean excReturn bits when tail chaining Peter Maydell
2019-04-29 17:00 ` Peter Maydell
2019-04-29 17:00 ` [Qemu-devel] [PULL 17/42] target/arm: Allow for floating point in callee stack integrity check Peter Maydell
2019-04-29 17:00 ` Peter Maydell
2019-04-29 17:00 ` [Qemu-devel] [PULL 18/42] target/arm: Handle floating point registers in exception return Peter Maydell
2019-04-29 17:00 ` Peter Maydell
2019-04-29 17:00 ` [Qemu-devel] [PULL 19/42] target/arm: Move NS TBFLAG from bit 19 to bit 6 Peter Maydell
2019-04-29 17:00 ` Peter Maydell
2019-04-29 17:00 ` [Qemu-devel] [PULL 20/42] target/arm: Overlap VECSTRIDE and XSCALE_CPAR TB flags Peter Maydell
2019-04-29 17:00 ` Peter Maydell
2019-04-29 17:00 ` [Qemu-devel] [PULL 21/42] target/arm: Set FPCCR.S when executing M-profile floating point insns Peter Maydell
2019-04-29 17:00 ` Peter Maydell
2019-04-29 17:00 ` [Qemu-devel] [PULL 22/42] target/arm: Activate M-profile floating point context when FPCCR.ASPEN is set Peter Maydell
2019-04-29 17:00 ` Peter Maydell
2019-04-29 17:00 ` [Qemu-devel] [PULL 23/42] target/arm: New helper function arm_v7m_mmu_idx_all() Peter Maydell
2019-04-29 17:00 ` Peter Maydell
2019-04-29 17:00 ` [Qemu-devel] [PULL 24/42] target/arm: New function armv7m_nvic_set_pending_lazyfp() Peter Maydell
2019-04-29 17:00 ` Peter Maydell
2019-04-29 17:00 ` [Qemu-devel] [PULL 25/42] target/arm: Add lazy-FP-stacking support to v7m_stack_write() Peter Maydell
2019-04-29 17:00 ` Peter Maydell
2019-04-29 17:00 ` [Qemu-devel] [PULL 26/42] target/arm: Implement M-profile lazy FP state preservation Peter Maydell
2019-04-29 17:00 ` Peter Maydell
2019-04-29 17:00 ` [Qemu-devel] [PULL 27/42] target/arm: Implement VLSTM for v7M CPUs with an FPU Peter Maydell
2019-04-29 17:00 ` Peter Maydell
2019-04-29 17:00 ` [Qemu-devel] [PULL 28/42] target/arm: Implement VLLDM " Peter Maydell
2019-04-29 17:00 ` Peter Maydell
2019-04-29 17:00 ` [Qemu-devel] [PULL 29/42] target/arm: Enable FPU for Cortex-M4 and Cortex-M33 Peter Maydell
2019-04-29 17:00 ` Peter Maydell
2019-04-29 17:00 ` [Qemu-devel] [PULL 30/42] hw/dma: Compile the bcm2835_dma device as common object Peter Maydell
2019-04-29 17:00 ` Peter Maydell
2019-04-29 17:00 ` [Qemu-devel] [PULL 31/42] hw/arm/aspeed: Use TYPE_TMP105/TYPE_PCA9552 instead of hardcoded string Peter Maydell
2019-04-29 17:00 ` Peter Maydell
2019-04-29 17:00 ` [Qemu-devel] [PULL 32/42] hw/arm/nseries: Use TYPE_TMP105 " Peter Maydell
2019-04-29 17:00 ` Peter Maydell
2019-04-29 17:00 ` [Qemu-devel] [PULL 33/42] hw/display/tc6393xb: Remove unused functions Peter Maydell
2019-04-29 17:00 ` Peter Maydell
2019-04-29 17:00 ` [Qemu-devel] [PULL 34/42] hw/devices: Move TC6393XB declarations into a new header Peter Maydell
2019-04-29 17:00 ` Peter Maydell
2019-04-29 17:00 ` [Qemu-devel] [PULL 35/42] hw/devices: Move Blizzard " Peter Maydell
2019-04-29 17:00 ` Peter Maydell
2019-04-29 17:00 ` [Qemu-devel] [PULL 36/42] hw/devices: Move CBus " Peter Maydell
2019-04-29 17:00 ` Peter Maydell
2019-04-29 17:00 ` [Qemu-devel] [PULL 37/42] hw/devices: Move Gamepad " Peter Maydell
2019-04-29 17:00 ` Peter Maydell
2019-04-29 17:00 ` Peter Maydell [this message]
2019-04-29 17:00 ` [Qemu-devel] [PULL 38/42] hw/devices: Move TI touchscreen " Peter Maydell
2019-04-29 17:00 ` [Qemu-devel] [PULL 39/42] hw/devices: Move LAN9118 " Peter Maydell
2019-04-29 17:00 ` Peter Maydell
2019-04-29 17:00 ` [Qemu-devel] [PULL 40/42] hw/net/ne2000-isa: Add guards to the header Peter Maydell
2019-04-29 17:00 ` Peter Maydell
2019-04-29 17:00 ` [Qemu-devel] [PULL 41/42] hw/net/lan9118: Export TYPE_LAN9118 and use it instead of hardcoded string Peter Maydell
2019-04-29 17:00 ` Peter Maydell
2019-04-29 17:00 ` [Qemu-devel] [PULL 42/42] hw/devices: Move SMSC 91C111 declaration into a new header Peter Maydell
2019-04-29 17:00 ` Peter Maydell
2019-04-29 18:10 ` [Qemu-devel] [PULL 00/42] target-arm queue Peter Maydell
2019-04-29 18:10 ` Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190429170030.11323-39-peter.maydell@linaro.org \
--to=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).