From: Peter Maydell <peter.maydell@linaro.org>
To: qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 39/42] hw/devices: Move LAN9118 declarations into a new header
Date: Mon, 29 Apr 2019 18:00:27 +0100 [thread overview]
Message-ID: <20190429170030.11323-40-peter.maydell@linaro.org> (raw)
In-Reply-To: <20190429170030.11323-1-peter.maydell@linaro.org>
From: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190412165416.7977-10-philmd@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
include/hw/devices.h | 3 ---
include/hw/net/lan9118.h | 19 +++++++++++++++++++
hw/arm/kzm.c | 2 +-
hw/arm/mps2.c | 2 +-
hw/arm/realview.c | 1 +
hw/arm/vexpress.c | 2 +-
hw/net/lan9118.c | 2 +-
7 files changed, 24 insertions(+), 7 deletions(-)
create mode 100644 include/hw/net/lan9118.h
diff --git a/include/hw/devices.h b/include/hw/devices.h
index ba9034050b4..ebc45c87997 100644
--- a/include/hw/devices.h
+++ b/include/hw/devices.h
@@ -8,7 +8,4 @@
/* smc91c111.c */
void smc91c111_init(NICInfo *, uint32_t, qemu_irq);
-/* lan9118.c */
-void lan9118_init(NICInfo *, uint32_t, qemu_irq);
-
#endif
diff --git a/include/hw/net/lan9118.h b/include/hw/net/lan9118.h
new file mode 100644
index 00000000000..d13d8cd3d22
--- /dev/null
+++ b/include/hw/net/lan9118.h
@@ -0,0 +1,19 @@
+/*
+ * SMSC LAN9118 Ethernet interface emulation
+ *
+ * Copyright (c) 2009 CodeSourcery, LLC.
+ * Written by Paul Brook
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ */
+
+#ifndef HW_NET_LAN9118_H
+#define HW_NET_LAN9118_H
+
+#include "hw/irq.h"
+#include "net/net.h"
+
+void lan9118_init(NICInfo *, uint32_t, qemu_irq);
+
+#endif
diff --git a/hw/arm/kzm.c b/hw/arm/kzm.c
index 864c7bd4114..139934c4ecf 100644
--- a/hw/arm/kzm.c
+++ b/hw/arm/kzm.c
@@ -22,7 +22,7 @@
#include "qemu/error-report.h"
#include "exec/address-spaces.h"
#include "net/net.h"
-#include "hw/devices.h"
+#include "hw/net/lan9118.h"
#include "hw/char/serial.h"
#include "sysemu/qtest.h"
diff --git a/hw/arm/mps2.c b/hw/arm/mps2.c
index e3d698ba6c4..54b7395849f 100644
--- a/hw/arm/mps2.c
+++ b/hw/arm/mps2.c
@@ -36,7 +36,7 @@
#include "hw/timer/cmsdk-apb-timer.h"
#include "hw/timer/cmsdk-apb-dualtimer.h"
#include "hw/misc/mps2-scc.h"
-#include "hw/devices.h"
+#include "hw/net/lan9118.h"
#include "net/net.h"
typedef enum MPS2FPGAType {
diff --git a/hw/arm/realview.c b/hw/arm/realview.c
index 242f5a87b6a..e9983c87639 100644
--- a/hw/arm/realview.c
+++ b/hw/arm/realview.c
@@ -15,6 +15,7 @@
#include "hw/arm/arm.h"
#include "hw/arm/primecell.h"
#include "hw/devices.h"
+#include "hw/net/lan9118.h"
#include "hw/pci/pci.h"
#include "net/net.h"
#include "sysemu/sysemu.h"
diff --git a/hw/arm/vexpress.c b/hw/arm/vexpress.c
index f07134c4245..d8634f3dd29 100644
--- a/hw/arm/vexpress.c
+++ b/hw/arm/vexpress.c
@@ -28,7 +28,7 @@
#include "hw/sysbus.h"
#include "hw/arm/arm.h"
#include "hw/arm/primecell.h"
-#include "hw/devices.h"
+#include "hw/net/lan9118.h"
#include "hw/i2c/i2c.h"
#include "net/net.h"
#include "sysemu/sysemu.h"
diff --git a/hw/net/lan9118.c b/hw/net/lan9118.c
index a6269d9463b..a428b16eda5 100644
--- a/hw/net/lan9118.c
+++ b/hw/net/lan9118.c
@@ -14,7 +14,7 @@
#include "hw/sysbus.h"
#include "net/net.h"
#include "net/eth.h"
-#include "hw/devices.h"
+#include "hw/net/lan9118.h"
#include "sysemu/sysemu.h"
#include "hw/ptimer.h"
#include "qemu/log.h"
--
2.20.1
next prev parent reply other threads:[~2019-04-29 17:01 UTC|newest]
Thread overview: 88+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-04-29 16:59 [Qemu-devel] [PULL 00/42] target-arm queue Peter Maydell
2019-04-29 16:59 ` Peter Maydell
2019-04-29 16:59 ` [Qemu-devel] [PULL 01/42] hw/arm/smmuv3: Remove SMMUNotifierNode Peter Maydell
2019-04-29 16:59 ` Peter Maydell
2019-04-29 16:59 ` [Qemu-devel] [PULL 02/42] hw/ssi/xilinx_spips: Avoid variable length array Peter Maydell
2019-04-29 16:59 ` Peter Maydell
2019-04-29 16:59 ` [Qemu-devel] [PULL 03/42] configure: Remove --source-path option Peter Maydell
2019-04-29 16:59 ` Peter Maydell
2019-04-29 16:59 ` [Qemu-devel] [PULL 04/42] target/arm: Make sure M-profile FPSCR RES0 bits are not settable Peter Maydell
2019-04-29 16:59 ` Peter Maydell
2019-04-29 16:59 ` [Qemu-devel] [PULL 05/42] hw/intc/armv7m_nvic: Allow reading of M-profile MVFR* registers Peter Maydell
2019-04-29 16:59 ` Peter Maydell
2019-04-29 16:59 ` [Qemu-devel] [PULL 06/42] target/arm: Implement dummy versions of M-profile FP-related registers Peter Maydell
2019-04-29 16:59 ` Peter Maydell
2019-04-29 16:59 ` [Qemu-devel] [PULL 07/42] target/arm: Disable most VFP sysregs for M-profile Peter Maydell
2019-04-29 16:59 ` Peter Maydell
2019-04-29 16:59 ` [Qemu-devel] [PULL 08/42] target/arm: Honour M-profile FP enable bits Peter Maydell
2019-04-29 16:59 ` Peter Maydell
2019-04-29 16:59 ` [Qemu-devel] [PULL 09/42] target/arm: Decode FP instructions for M profile Peter Maydell
2019-04-29 16:59 ` Peter Maydell
2019-04-29 16:59 ` [Qemu-devel] [PULL 10/42] target/arm: Clear CONTROL_S.SFPA in SG insn if FPU present Peter Maydell
2019-04-29 16:59 ` Peter Maydell
2019-04-29 16:59 ` [Qemu-devel] [PULL 11/42] target/arm: Handle SFPA and FPCA bits in reads and writes of CONTROL Peter Maydell
2019-04-29 16:59 ` Peter Maydell
2019-04-29 17:00 ` [Qemu-devel] [PULL 12/42] target/arm/helper: don't return early for STKOF faults during stacking Peter Maydell
2019-04-29 17:00 ` Peter Maydell
2019-04-29 17:00 ` [Qemu-devel] [PULL 13/42] target/arm: Handle floating point registers in exception entry Peter Maydell
2019-04-29 17:00 ` Peter Maydell
2019-04-29 17:00 ` [Qemu-devel] [PULL 14/42] target/arm: Implement v7m_update_fpccr() Peter Maydell
2019-04-29 17:00 ` Peter Maydell
2019-04-29 17:00 ` [Qemu-devel] [PULL 15/42] target/arm: Clear CONTROL.SFPA in BXNS and BLXNS Peter Maydell
2019-04-29 17:00 ` Peter Maydell
2019-04-29 17:00 ` [Qemu-devel] [PULL 16/42] target/arm: Clean excReturn bits when tail chaining Peter Maydell
2019-04-29 17:00 ` Peter Maydell
2019-04-29 17:00 ` [Qemu-devel] [PULL 17/42] target/arm: Allow for floating point in callee stack integrity check Peter Maydell
2019-04-29 17:00 ` Peter Maydell
2019-04-29 17:00 ` [Qemu-devel] [PULL 18/42] target/arm: Handle floating point registers in exception return Peter Maydell
2019-04-29 17:00 ` Peter Maydell
2019-04-29 17:00 ` [Qemu-devel] [PULL 19/42] target/arm: Move NS TBFLAG from bit 19 to bit 6 Peter Maydell
2019-04-29 17:00 ` Peter Maydell
2019-04-29 17:00 ` [Qemu-devel] [PULL 20/42] target/arm: Overlap VECSTRIDE and XSCALE_CPAR TB flags Peter Maydell
2019-04-29 17:00 ` Peter Maydell
2019-04-29 17:00 ` [Qemu-devel] [PULL 21/42] target/arm: Set FPCCR.S when executing M-profile floating point insns Peter Maydell
2019-04-29 17:00 ` Peter Maydell
2019-04-29 17:00 ` [Qemu-devel] [PULL 22/42] target/arm: Activate M-profile floating point context when FPCCR.ASPEN is set Peter Maydell
2019-04-29 17:00 ` Peter Maydell
2019-04-29 17:00 ` [Qemu-devel] [PULL 23/42] target/arm: New helper function arm_v7m_mmu_idx_all() Peter Maydell
2019-04-29 17:00 ` Peter Maydell
2019-04-29 17:00 ` [Qemu-devel] [PULL 24/42] target/arm: New function armv7m_nvic_set_pending_lazyfp() Peter Maydell
2019-04-29 17:00 ` Peter Maydell
2019-04-29 17:00 ` [Qemu-devel] [PULL 25/42] target/arm: Add lazy-FP-stacking support to v7m_stack_write() Peter Maydell
2019-04-29 17:00 ` Peter Maydell
2019-04-29 17:00 ` [Qemu-devel] [PULL 26/42] target/arm: Implement M-profile lazy FP state preservation Peter Maydell
2019-04-29 17:00 ` Peter Maydell
2019-04-29 17:00 ` [Qemu-devel] [PULL 27/42] target/arm: Implement VLSTM for v7M CPUs with an FPU Peter Maydell
2019-04-29 17:00 ` Peter Maydell
2019-04-29 17:00 ` [Qemu-devel] [PULL 28/42] target/arm: Implement VLLDM " Peter Maydell
2019-04-29 17:00 ` Peter Maydell
2019-04-29 17:00 ` [Qemu-devel] [PULL 29/42] target/arm: Enable FPU for Cortex-M4 and Cortex-M33 Peter Maydell
2019-04-29 17:00 ` Peter Maydell
2019-04-29 17:00 ` [Qemu-devel] [PULL 30/42] hw/dma: Compile the bcm2835_dma device as common object Peter Maydell
2019-04-29 17:00 ` Peter Maydell
2019-04-29 17:00 ` [Qemu-devel] [PULL 31/42] hw/arm/aspeed: Use TYPE_TMP105/TYPE_PCA9552 instead of hardcoded string Peter Maydell
2019-04-29 17:00 ` Peter Maydell
2019-04-29 17:00 ` [Qemu-devel] [PULL 32/42] hw/arm/nseries: Use TYPE_TMP105 " Peter Maydell
2019-04-29 17:00 ` Peter Maydell
2019-04-29 17:00 ` [Qemu-devel] [PULL 33/42] hw/display/tc6393xb: Remove unused functions Peter Maydell
2019-04-29 17:00 ` Peter Maydell
2019-04-29 17:00 ` [Qemu-devel] [PULL 34/42] hw/devices: Move TC6393XB declarations into a new header Peter Maydell
2019-04-29 17:00 ` Peter Maydell
2019-04-29 17:00 ` [Qemu-devel] [PULL 35/42] hw/devices: Move Blizzard " Peter Maydell
2019-04-29 17:00 ` Peter Maydell
2019-04-29 17:00 ` [Qemu-devel] [PULL 36/42] hw/devices: Move CBus " Peter Maydell
2019-04-29 17:00 ` Peter Maydell
2019-04-29 17:00 ` [Qemu-devel] [PULL 37/42] hw/devices: Move Gamepad " Peter Maydell
2019-04-29 17:00 ` Peter Maydell
2019-04-29 17:00 ` [Qemu-devel] [PULL 38/42] hw/devices: Move TI touchscreen " Peter Maydell
2019-04-29 17:00 ` Peter Maydell
2019-04-29 17:00 ` Peter Maydell [this message]
2019-04-29 17:00 ` [Qemu-devel] [PULL 39/42] hw/devices: Move LAN9118 " Peter Maydell
2019-04-29 17:00 ` [Qemu-devel] [PULL 40/42] hw/net/ne2000-isa: Add guards to the header Peter Maydell
2019-04-29 17:00 ` Peter Maydell
2019-04-29 17:00 ` [Qemu-devel] [PULL 41/42] hw/net/lan9118: Export TYPE_LAN9118 and use it instead of hardcoded string Peter Maydell
2019-04-29 17:00 ` Peter Maydell
2019-04-29 17:00 ` [Qemu-devel] [PULL 42/42] hw/devices: Move SMSC 91C111 declaration into a new header Peter Maydell
2019-04-29 17:00 ` Peter Maydell
2019-04-29 18:10 ` [Qemu-devel] [PULL 00/42] target-arm queue Peter Maydell
2019-04-29 18:10 ` Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190429170030.11323-40-peter.maydell@linaro.org \
--to=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).