qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Kevin Wolf <kwolf@redhat.com>
To: qemu-block@nongnu.org
Cc: kwolf@redhat.com, qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 11/27] qcow2: Fix full preallocation with external data file
Date: Tue, 30 Apr 2019 17:42:28 +0200	[thread overview]
Message-ID: <20190430154244.30083-12-kwolf@redhat.com> (raw)
In-Reply-To: <20190430154244.30083-1-kwolf@redhat.com>

preallocate_co() already gave the data file the full size without
forwarding the requested preallocation mode to the protocol. When
bdrv_co_truncate() was called later with the preallocation mode, the
file didn't actually grow any more, so the data file stayed unallocated
even if full preallocation was requested.

Pass the right preallocation mode to preallocate_co() and remove the
second bdrv_co_truncate() to fix this. As a side effect, the ugly
one-byte write in preallocate_co() is replaced with a truncate call,
now leaving the last block unallocated on the protocol level as it
should be.

Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
---
 block/qcow2.c | 41 +++++++++++++++++++++++------------------
 1 file changed, 23 insertions(+), 18 deletions(-)

diff --git a/block/qcow2.c b/block/qcow2.c
index b4f9f5a240..7fbef97aab 100644
--- a/block/qcow2.c
+++ b/block/qcow2.c
@@ -2721,11 +2721,13 @@ static int qcow2_set_up_encryption(BlockDriverState *bs,
  * Returns: 0 on success, -errno on failure.
  */
 static int coroutine_fn preallocate_co(BlockDriverState *bs, uint64_t offset,
-                                       uint64_t new_length, Error **errp)
+                                       uint64_t new_length, PreallocMode mode,
+                                       Error **errp)
 {
     BDRVQcow2State *s = bs->opaque;
     uint64_t bytes;
     uint64_t host_offset = 0;
+    int64_t file_length;
     unsigned int cur_bytes;
     int ret;
     QCowL2Meta *meta;
@@ -2772,12 +2774,19 @@ static int coroutine_fn preallocate_co(BlockDriverState *bs, uint64_t offset,
      * all of the allocated clusters (otherwise we get failing reads after
      * EOF). Extend the image to the last allocated sector.
      */
-    if (host_offset != 0) {
-        uint8_t data = 0;
-        ret = bdrv_pwrite(s->data_file, (host_offset + cur_bytes) - 1,
-                          &data, 1);
+    file_length = bdrv_getlength(s->data_file->bs);
+    if (file_length < 0) {
+        error_setg_errno(errp, -file_length, "Could not get file size");
+        return file_length;
+    }
+
+    if (host_offset + cur_bytes > file_length) {
+        if (mode == PREALLOC_MODE_METADATA) {
+            mode = PREALLOC_MODE_OFF;
+        }
+        ret = bdrv_co_truncate(s->data_file, host_offset + cur_bytes, mode,
+                               errp);
         if (ret < 0) {
-            error_setg_errno(errp, -ret, "Writing to EOF failed");
             return ret;
         }
     }
@@ -3748,10 +3757,16 @@ static int coroutine_fn qcow2_co_truncate(BlockDriverState *bs, int64_t offset,
 
     switch (prealloc) {
     case PREALLOC_MODE_OFF:
+        if (has_data_file(bs)) {
+            ret = bdrv_co_truncate(s->data_file, offset, prealloc, errp);
+            if (ret < 0) {
+                goto fail;
+            }
+        }
         break;
 
     case PREALLOC_MODE_METADATA:
-        ret = preallocate_co(bs, old_length, offset, errp);
+        ret = preallocate_co(bs, old_length, offset, prealloc, errp);
         if (ret < 0) {
             goto fail;
         }
@@ -3768,7 +3783,7 @@ static int coroutine_fn qcow2_co_truncate(BlockDriverState *bs, int64_t offset,
         /* With a data file, preallocation means just allocating the metadata
          * and forwarding the truncate request to the data file */
         if (has_data_file(bs)) {
-            ret = preallocate_co(bs, old_length, offset, errp);
+            ret = preallocate_co(bs, old_length, offset, prealloc, errp);
             if (ret < 0) {
                 goto fail;
             }
@@ -3883,16 +3898,6 @@ static int coroutine_fn qcow2_co_truncate(BlockDriverState *bs, int64_t offset,
 
     bs->total_sectors = offset / BDRV_SECTOR_SIZE;
 
-    if (has_data_file(bs)) {
-        if (prealloc == PREALLOC_MODE_METADATA) {
-            prealloc = PREALLOC_MODE_OFF;
-        }
-        ret = bdrv_co_truncate(s->data_file, offset, prealloc, errp);
-        if (ret < 0) {
-            goto fail;
-        }
-    }
-
     /* write updated header.size */
     offset = cpu_to_be64(offset);
     ret = bdrv_pwrite_sync(bs->file, offsetof(QCowHeader, size),
-- 
2.20.1

  parent reply	other threads:[~2019-04-30 15:43 UTC|newest]

Thread overview: 58+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-04-30 15:42 [Qemu-devel] [PULL 00/27] Block layer patches Kevin Wolf
2019-04-30 15:42 ` Kevin Wolf
2019-04-30 15:42 ` [Qemu-devel] [PULL 01/27] tests/qemu-iotests: Fix output of qemu-io related tests Kevin Wolf
2019-04-30 15:42   ` Kevin Wolf
2019-04-30 15:42 ` [Qemu-devel] [PULL 02/27] block: Fix AioContext switch for bs->drv == NULL Kevin Wolf
2019-04-30 15:42   ` Kevin Wolf
2019-04-30 15:42 ` [Qemu-devel] [PULL 03/27] vpc: unlock Coroutine lock to make IO submit Concurrently Kevin Wolf
2019-04-30 15:42   ` Kevin Wolf
2019-04-30 15:42 ` [Qemu-devel] [PULL 04/27] vmdk: Set vmdk parent backing_format to vmdk Kevin Wolf
2019-04-30 15:42   ` Kevin Wolf
2019-04-30 15:42 ` [Qemu-devel] [PULL 05/27] block/vhdx: Remove redundant IEC binary prefixes definition Kevin Wolf
2019-04-30 15:42   ` Kevin Wolf
2019-04-30 15:42 ` [Qemu-devel] [PULL 06/27] block/vhdx: Use IEC binary prefixes for size constants Kevin Wolf
2019-04-30 15:42   ` Kevin Wolf
2019-04-30 15:42 ` [Qemu-devel] [PULL 07/27] cutils: Fix size_to_str() on 32-bit platforms Kevin Wolf
2019-04-30 15:42   ` Kevin Wolf
2019-04-30 15:42 ` [Qemu-devel] [PULL 08/27] qemu-img: Saner printing of large file sizes Kevin Wolf
2019-04-30 15:42   ` Kevin Wolf
2019-04-30 15:42 ` [Qemu-devel] [PULL 09/27] qcow2: Avoid COW during metadata preallocation Kevin Wolf
2019-04-30 15:42   ` Kevin Wolf
2019-04-30 15:42 ` [Qemu-devel] [PULL 10/27] qcow2: Add errp to preallocate_co() Kevin Wolf
2019-04-30 15:42   ` Kevin Wolf
2019-04-30 15:42 ` Kevin Wolf [this message]
2019-04-30 15:42   ` [Qemu-devel] [PULL 11/27] qcow2: Fix full preallocation with external data file Kevin Wolf
2019-04-30 15:42 ` [Qemu-devel] [PULL 12/27] iotests: Perform the correct test in 082 Kevin Wolf
2019-04-30 15:42   ` Kevin Wolf
2019-04-30 15:42 ` [Qemu-devel] [PULL 13/27] qemu-img: Make create hint at protocol options Kevin Wolf
2019-04-30 15:42   ` Kevin Wolf
2019-04-30 15:42 ` [Qemu-devel] [PULL 14/27] qcow2: Fix qcow2_make_empty() with external data file Kevin Wolf
2019-04-30 15:42   ` Kevin Wolf
2019-04-30 15:42 ` [Qemu-devel] [PULL 15/27] qcow2: Fix error handling in the compression code Kevin Wolf
2019-04-30 15:42   ` Kevin Wolf
2019-04-30 15:42 ` [Qemu-devel] [PULL 16/27] block: introduce byte-based io helpers Kevin Wolf
2019-04-30 15:42   ` Kevin Wolf
2019-04-30 15:42 ` [Qemu-devel] [PULL 17/27] block/qcow2: use buffer-based io Kevin Wolf
2019-04-30 15:42   ` Kevin Wolf
2019-04-30 15:42 ` [Qemu-devel] [PULL 18/27] block/qcow: " Kevin Wolf
2019-04-30 15:42   ` Kevin Wolf
2019-04-30 15:42 ` [Qemu-devel] [PULL 19/27] block/qed: " Kevin Wolf
2019-04-30 15:42   ` Kevin Wolf
2019-04-30 15:42 ` [Qemu-devel] [PULL 20/27] block/parallels: " Kevin Wolf
2019-04-30 15:42   ` Kevin Wolf
2019-04-30 15:42 ` [Qemu-devel] [PULL 21/27] block/backup: " Kevin Wolf
2019-04-30 15:42   ` Kevin Wolf
2019-04-30 15:42 ` [Qemu-devel] [PULL 22/27] block/commit: " Kevin Wolf
2019-04-30 15:42   ` Kevin Wolf
2019-04-30 15:42 ` [Qemu-devel] [PULL 23/27] block/stream: " Kevin Wolf
2019-04-30 15:42   ` Kevin Wolf
2019-04-30 15:42 ` [Qemu-devel] [PULL 24/27] qemu-img: " Kevin Wolf
2019-04-30 15:42   ` Kevin Wolf
2019-04-30 15:42 ` [Qemu-devel] [PULL 25/27] commit: Make base read-only if there is an early failure Kevin Wolf
2019-04-30 15:42   ` Kevin Wolf
2019-04-30 15:42 ` [Qemu-devel] [PULL 26/27] iotests: Check that images are in read-only mode after block-commit Kevin Wolf
2019-04-30 15:42   ` Kevin Wolf
2019-04-30 15:42 ` [Qemu-devel] [PULL 27/27] block/qed: add missed coroutine_fn markers Kevin Wolf
2019-04-30 15:42   ` Kevin Wolf
2019-04-30 16:57 ` [Qemu-devel] [PULL 00/27] Block layer patches Peter Maydell
2019-04-30 16:57   ` Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190430154244.30083-12-kwolf@redhat.com \
    --to=kwolf@redhat.com \
    --cc=qemu-block@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).