[Qemu-devel] [PULL 5/7] hw/usb/hcd-ohci: Do not use PCI functions with sysbus devices in ohci_die()

[Gerd Hoffmann <kraxel@redhat.com>]

From: Thomas Huth <thuth@redhat.com>

The ohci_die() function always assumes to be running with a PCI OHCI
controller and calls the PCI-specific functions pci_set_word(). However,
this function might also get called for the sysbus OHCI devices, so it
likely fails in that case. To fix this issue, change the code now, so that
there are two implementations now, one for sysbus and one for PCI, and
use the right function via a function pointer in the OHCIState structure.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190419075625.24251-2-thuth@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
---
 hw/usb/hcd-ohci.c | 39 +++++++++++++++++++++++++++------------
 1 file changed, 27 insertions(+), 12 deletions(-)

diff --git a/hw/usb/hcd-ohci.c b/hw/usb/hcd-ohci.c
index 81cf5ab7a5a7..6d3f556989fb 100644
--- a/hw/usb/hcd-ohci.c
+++ b/hw/usb/hcd-ohci.c
@@ -52,7 +52,7 @@ typedef struct OHCIPort {
     uint32_t ctrl;
 } OHCIPort;
 
-typedef struct {
+typedef struct OHCIState {
     USBBus bus;
     qemu_irq irq;
     MemoryRegion mem;
@@ -108,6 +108,7 @@ typedef struct {
     uint32_t async_td;
     bool async_complete;
 
+    void (*ohci_die)(struct OHCIState *ohci);
 } OHCIState;
 
 /* Host Controller Communications Area */
@@ -302,7 +303,10 @@ struct ohci_iso_td {
 
 #define OHCI_HRESET_FSBIR       (1 << 0)
 
-static void ohci_die(OHCIState *ohci);
+static void ohci_die(OHCIState *ohci)
+{
+    ohci->ohci_die(ohci);
+}
 
 /* Update IRQ levels */
 static inline void ohci_intr_update(OHCIState *ohci)
@@ -1854,13 +1858,14 @@ static USBBusOps ohci_bus_ops = {
 
 static void usb_ohci_init(OHCIState *ohci, DeviceState *dev,
                           uint32_t num_ports, dma_addr_t localmem_base,
-                          char *masterbus, uint32_t firstport,
-                          AddressSpace *as, Error **errp)
+                          char *masterbus, uint32_t firstport, AddressSpace *as,
+                          void (*ohci_die_fn)(struct OHCIState *), Error **errp)
 {
     Error *err = NULL;
     int i;
 
     ohci->as = as;
+    ohci->ohci_die = ohci_die_fn;
 
     if (num_ports > OHCI_MAX_PORTS) {
         error_setg(errp, "OHCI num-ports=%u is too big (limit is %u ports)",
@@ -1933,18 +1938,28 @@ typedef struct {
     uint32_t firstport;
 } OHCIPCIState;
 
-/** A typical O/EHCI will stop operating, set itself into error state
- * (which can be queried by MMIO) and will set PERR in its config
- * space to signal that it got an error
+/**
+ * A typical OHCI will stop operating and set itself into error state
+ * (which can be queried by MMIO) to signal that it got an error.
  */
-static void ohci_die(OHCIState *ohci)
+static void ohci_sysbus_die(struct OHCIState *ohci)
 {
-    OHCIPCIState *dev = container_of(ohci, OHCIPCIState, state);
-
     trace_usb_ohci_die();
 
     ohci_set_interrupt(ohci, OHCI_INTR_UE);
     ohci_bus_stop(ohci);
+}
+
+/**
+ * A typical PCI OHCI will additionally set PERR in its configspace to
+ * signal that it got an error.
+ */
+static void ohci_pci_die(struct OHCIState *ohci)
+{
+    OHCIPCIState *dev = container_of(ohci, OHCIPCIState, state);
+
+    ohci_sysbus_die(ohci);
+
     pci_set_word(dev->parent_obj.config + PCI_STATUS,
                  PCI_STATUS_DETECTED_PARITY);
 }
@@ -1959,7 +1974,7 @@ static void usb_ohci_realize_pci(PCIDevice *dev, Error **errp)
 
     usb_ohci_init(&ohci->state, DEVICE(dev), ohci->num_ports, 0,
                   ohci->masterbus, ohci->firstport,
-                  pci_get_address_space(dev), &err);
+                  pci_get_address_space(dev), ohci_pci_die, &err);
     if (err) {
         error_propagate(errp, err);
         return;
@@ -2023,7 +2038,7 @@ static void ohci_realize_pxa(DeviceState *dev, Error **errp)
 
     usb_ohci_init(&s->ohci, dev, s->num_ports, s->dma_offset,
                   s->masterbus, s->firstport,
-                  &address_space_memory, &err);
+                  &address_space_memory, ohci_sysbus_die, &err);
     if (err) {
         error_propagate(errp, err);
         return;
-- 
2.18.1