From: "Philippe Mathieu-Daudé" <philmd@redhat.com> To: qemu-devel@nongnu.org, Stephen Checkoway <stephen.checkoway@oberlin.edu> Cc: "Markus Armbruster" <armbru@redhat.com>, "Max Reitz" <mreitz@redhat.com>, "Thomas Huth" <thuth@redhat.com>, "Laurent Vivier" <lvivier@redhat.com>, "Paolo Bonzini" <pbonzini@redhat.com>, qemu-block@nongnu.org, "Alex Bennée" <alex.bennee@linaro.org>, "Kevin Wolf" <kwolf@redhat.com>, "Peter Maydell" <peter.maydell@linaro.org>, "Philippe Mathieu-Daudé" <philmd@redhat.com> Subject: [Qemu-devel] [PATCH 11/13] hw/block/pflash_cfi02: Unify the MemoryRegionOps Date: Mon, 6 May 2019 00:15:42 +0200 [thread overview] Message-ID: <20190505221544.31568-12-philmd@redhat.com> (raw) In-Reply-To: <20190505221544.31568-1-philmd@redhat.com> The pflash_read()/pflash_write() can check the device endianess via the pfl->be variable, so remove the 'int be' argument. Since the big/little MemoryRegionOps are now identical, it is pointless to declare them both. Unify them. Signed-off-by: Stephen Checkoway <stephen.checkoway@oberlin.edu> Message-Id: <20190426162624.55977-3-stephen.checkoway@oberlin.edu> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> [PMD: Extracted from bigger patch to ease review] Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> --- hw/block/pflash_cfi02.c | 62 +++++++++++------------------------------ 1 file changed, 16 insertions(+), 46 deletions(-) diff --git a/hw/block/pflash_cfi02.c b/hw/block/pflash_cfi02.c index adfa39f9b5e..59daade2ee6 100644 --- a/hw/block/pflash_cfi02.c +++ b/hw/block/pflash_cfi02.c @@ -186,11 +186,11 @@ static uint64_t pflash_data_read(PFlashCFI02 *pfl, hwaddr offset, return ret; } -static uint32_t pflash_read(PFlashCFI02 *pfl, hwaddr offset, - int width, int be) +static uint64_t pflash_read(void *opaque, hwaddr offset, unsigned int width) { + PFlashCFI02 *pfl = opaque; hwaddr boff; - uint32_t ret; + uint64_t ret; ret = -1; trace_pflash_read(offset, pfl->cmd, width, pfl->wcycle); @@ -238,14 +238,14 @@ static uint32_t pflash_read(PFlashCFI02 *pfl, hwaddr offset, default: ret = pflash_data_read(pfl, offset, width); } - DPRINTF("%s: ID " TARGET_FMT_plx " %" PRIx32 "\n", __func__, boff, ret); + DPRINTF("%s: ID " TARGET_FMT_plx " %" PRIx64 "\n", __func__, boff, ret); break; case 0xA0: case 0x10: case 0x30: /* Status register read */ ret = pfl->status; - DPRINTF("%s: status %" PRIx32 "\n", __func__, ret); + DPRINTF("%s: status %" PRIx64 "\n", __func__, ret); /* Toggle bit 6 */ toggle_dq6(pfl); break; @@ -263,8 +263,7 @@ static uint32_t pflash_read(PFlashCFI02 *pfl, hwaddr offset, } /* update flash content on disk */ -static void pflash_update(PFlashCFI02 *pfl, int offset, - int size) +static void pflash_update(PFlashCFI02 *pfl, int offset, int size) { int offset_end; if (pfl->blk) { @@ -277,9 +276,10 @@ static void pflash_update(PFlashCFI02 *pfl, int offset, } } -static void pflash_write(PFlashCFI02 *pfl, hwaddr offset, - uint32_t value, int width, int be) +static void pflash_write(void *opaque, hwaddr offset, uint64_t value, + unsigned int width) { + PFlashCFI02 *pfl = opaque; hwaddr boff; uint8_t *p; uint8_t cmd; @@ -295,7 +295,7 @@ static void pflash_write(PFlashCFI02 *pfl, hwaddr offset, trace_pflash_write(offset, value, width, pfl->wcycle); offset &= pfl->chip_len - 1; - DPRINTF("%s: offset " TARGET_FMT_plx " %08" PRIx32 " %d\n", __func__, + DPRINTF("%s: offset " TARGET_FMT_plx " %08" PRIx64 " %d\n", __func__, offset, value, width); boff = offset & (pfl->sector_len - 1); if (pfl->width == 2) @@ -492,39 +492,9 @@ static void pflash_write(PFlashCFI02 *pfl, hwaddr offset, pfl->cmd = 0; } -static uint64_t pflash_be_readfn(void *opaque, hwaddr addr, unsigned size) -{ - return pflash_read(opaque, addr, size, 1); -} - -static void pflash_be_writefn(void *opaque, hwaddr addr, - uint64_t value, unsigned size) -{ - pflash_write(opaque, addr, value, size, 1); -} - -static uint64_t pflash_le_readfn(void *opaque, hwaddr addr, unsigned size) -{ - return pflash_read(opaque, addr, size, 0); -} - -static void pflash_le_writefn(void *opaque, hwaddr addr, - uint64_t value, unsigned size) -{ - pflash_write(opaque, addr, value, size, 0); -} - -static const MemoryRegionOps pflash_cfi02_ops_be = { - .read = pflash_be_readfn, - .write = pflash_be_writefn, - .valid.min_access_size = 1, - .valid.max_access_size = 4, - .endianness = DEVICE_NATIVE_ENDIAN, -}; - -static const MemoryRegionOps pflash_cfi02_ops_le = { - .read = pflash_le_readfn, - .write = pflash_le_writefn, +static const MemoryRegionOps pflash_cfi02_ops = { + .read = pflash_read, + .write = pflash_write, .valid.min_access_size = 1, .valid.max_access_size = 4, .endianness = DEVICE_NATIVE_ENDIAN, @@ -552,9 +522,9 @@ static void pflash_cfi02_realize(DeviceState *dev, Error **errp) chip_len = pfl->sector_len * pfl->nb_blocs; - memory_region_init_rom_device(&pfl->orig_mem, OBJECT(pfl), pfl->be ? - &pflash_cfi02_ops_be : &pflash_cfi02_ops_le, - pfl, pfl->name, chip_len, &local_err); + memory_region_init_rom_device(&pfl->orig_mem, OBJECT(pfl), + &pflash_cfi02_ops, pfl, pfl->name, + chip_len, &local_err); if (local_err) { error_propagate(errp, local_err); return; -- 2.20.1
WARNING: multiple messages have this Message-ID (diff)
From: "Philippe Mathieu-Daudé" <philmd@redhat.com> To: qemu-devel@nongnu.org, Stephen Checkoway <stephen.checkoway@oberlin.edu> Cc: "Laurent Vivier" <lvivier@redhat.com>, "Kevin Wolf" <kwolf@redhat.com>, "Thomas Huth" <thuth@redhat.com>, qemu-block@nongnu.org, "Peter Maydell" <peter.maydell@linaro.org>, "Philippe Mathieu-Daudé" <philmd@redhat.com>, "Markus Armbruster" <armbru@redhat.com>, "Max Reitz" <mreitz@redhat.com>, "Paolo Bonzini" <pbonzini@redhat.com>, "Alex Bennée" <alex.bennee@linaro.org> Subject: [Qemu-devel] [PATCH 11/13] hw/block/pflash_cfi02: Unify the MemoryRegionOps Date: Mon, 6 May 2019 00:15:42 +0200 [thread overview] Message-ID: <20190505221544.31568-12-philmd@redhat.com> (raw) Message-ID: <20190505221542.FdnhMHI_FFyS8V4-JSc7jiSvsq2EVkf8kHgyMP7utEI@z> (raw) In-Reply-To: <20190505221544.31568-1-philmd@redhat.com> The pflash_read()/pflash_write() can check the device endianess via the pfl->be variable, so remove the 'int be' argument. Since the big/little MemoryRegionOps are now identical, it is pointless to declare them both. Unify them. Signed-off-by: Stephen Checkoway <stephen.checkoway@oberlin.edu> Message-Id: <20190426162624.55977-3-stephen.checkoway@oberlin.edu> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> [PMD: Extracted from bigger patch to ease review] Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> --- hw/block/pflash_cfi02.c | 62 +++++++++++------------------------------ 1 file changed, 16 insertions(+), 46 deletions(-) diff --git a/hw/block/pflash_cfi02.c b/hw/block/pflash_cfi02.c index adfa39f9b5e..59daade2ee6 100644 --- a/hw/block/pflash_cfi02.c +++ b/hw/block/pflash_cfi02.c @@ -186,11 +186,11 @@ static uint64_t pflash_data_read(PFlashCFI02 *pfl, hwaddr offset, return ret; } -static uint32_t pflash_read(PFlashCFI02 *pfl, hwaddr offset, - int width, int be) +static uint64_t pflash_read(void *opaque, hwaddr offset, unsigned int width) { + PFlashCFI02 *pfl = opaque; hwaddr boff; - uint32_t ret; + uint64_t ret; ret = -1; trace_pflash_read(offset, pfl->cmd, width, pfl->wcycle); @@ -238,14 +238,14 @@ static uint32_t pflash_read(PFlashCFI02 *pfl, hwaddr offset, default: ret = pflash_data_read(pfl, offset, width); } - DPRINTF("%s: ID " TARGET_FMT_plx " %" PRIx32 "\n", __func__, boff, ret); + DPRINTF("%s: ID " TARGET_FMT_plx " %" PRIx64 "\n", __func__, boff, ret); break; case 0xA0: case 0x10: case 0x30: /* Status register read */ ret = pfl->status; - DPRINTF("%s: status %" PRIx32 "\n", __func__, ret); + DPRINTF("%s: status %" PRIx64 "\n", __func__, ret); /* Toggle bit 6 */ toggle_dq6(pfl); break; @@ -263,8 +263,7 @@ static uint32_t pflash_read(PFlashCFI02 *pfl, hwaddr offset, } /* update flash content on disk */ -static void pflash_update(PFlashCFI02 *pfl, int offset, - int size) +static void pflash_update(PFlashCFI02 *pfl, int offset, int size) { int offset_end; if (pfl->blk) { @@ -277,9 +276,10 @@ static void pflash_update(PFlashCFI02 *pfl, int offset, } } -static void pflash_write(PFlashCFI02 *pfl, hwaddr offset, - uint32_t value, int width, int be) +static void pflash_write(void *opaque, hwaddr offset, uint64_t value, + unsigned int width) { + PFlashCFI02 *pfl = opaque; hwaddr boff; uint8_t *p; uint8_t cmd; @@ -295,7 +295,7 @@ static void pflash_write(PFlashCFI02 *pfl, hwaddr offset, trace_pflash_write(offset, value, width, pfl->wcycle); offset &= pfl->chip_len - 1; - DPRINTF("%s: offset " TARGET_FMT_plx " %08" PRIx32 " %d\n", __func__, + DPRINTF("%s: offset " TARGET_FMT_plx " %08" PRIx64 " %d\n", __func__, offset, value, width); boff = offset & (pfl->sector_len - 1); if (pfl->width == 2) @@ -492,39 +492,9 @@ static void pflash_write(PFlashCFI02 *pfl, hwaddr offset, pfl->cmd = 0; } -static uint64_t pflash_be_readfn(void *opaque, hwaddr addr, unsigned size) -{ - return pflash_read(opaque, addr, size, 1); -} - -static void pflash_be_writefn(void *opaque, hwaddr addr, - uint64_t value, unsigned size) -{ - pflash_write(opaque, addr, value, size, 1); -} - -static uint64_t pflash_le_readfn(void *opaque, hwaddr addr, unsigned size) -{ - return pflash_read(opaque, addr, size, 0); -} - -static void pflash_le_writefn(void *opaque, hwaddr addr, - uint64_t value, unsigned size) -{ - pflash_write(opaque, addr, value, size, 0); -} - -static const MemoryRegionOps pflash_cfi02_ops_be = { - .read = pflash_be_readfn, - .write = pflash_be_writefn, - .valid.min_access_size = 1, - .valid.max_access_size = 4, - .endianness = DEVICE_NATIVE_ENDIAN, -}; - -static const MemoryRegionOps pflash_cfi02_ops_le = { - .read = pflash_le_readfn, - .write = pflash_le_writefn, +static const MemoryRegionOps pflash_cfi02_ops = { + .read = pflash_read, + .write = pflash_write, .valid.min_access_size = 1, .valid.max_access_size = 4, .endianness = DEVICE_NATIVE_ENDIAN, @@ -552,9 +522,9 @@ static void pflash_cfi02_realize(DeviceState *dev, Error **errp) chip_len = pfl->sector_len * pfl->nb_blocs; - memory_region_init_rom_device(&pfl->orig_mem, OBJECT(pfl), pfl->be ? - &pflash_cfi02_ops_be : &pflash_cfi02_ops_le, - pfl, pfl->name, chip_len, &local_err); + memory_region_init_rom_device(&pfl->orig_mem, OBJECT(pfl), + &pflash_cfi02_ops, pfl, pfl->name, + chip_len, &local_err); if (local_err) { error_propagate(errp, local_err); return; -- 2.20.1
next prev parent reply other threads:[~2019-05-05 22:16 UTC|newest] Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-05-05 22:15 [Qemu-devel] [PATCH 00/13] hw/block/pflash_cfi02: Clean-up and fixes Philippe Mathieu-Daudé 2019-05-05 22:15 ` Philippe Mathieu-Daudé 2019-05-05 22:15 ` [Qemu-devel] [PATCH 01/13] tests/pflash-cfi02: Add test for supported CFI commands Philippe Mathieu-Daudé 2019-05-05 22:15 ` Philippe Mathieu-Daudé 2019-05-05 22:15 ` [Qemu-devel] [PATCH 02/13] tests/pflash-cfi02: Use the GLib API Philippe Mathieu-Daudé 2019-05-05 22:15 ` Philippe Mathieu-Daudé 2019-05-05 22:15 ` [Qemu-devel] [PATCH 03/13] tests/pflash-cfi02: Use IEC binary prefixes for size constants Philippe Mathieu-Daudé 2019-05-05 22:15 ` Philippe Mathieu-Daudé 2019-05-05 22:15 ` [Qemu-devel] [PATCH 04/13] hw/block/pflash_cfi02: Fix debug format string Philippe Mathieu-Daudé 2019-05-05 22:15 ` Philippe Mathieu-Daudé 2019-05-05 22:15 ` [Qemu-devel] [PATCH 05/13] hw/block/pflash_cfi02: Add an enum to define the write cycles Philippe Mathieu-Daudé 2019-05-05 22:15 ` Philippe Mathieu-Daudé 2019-05-05 22:15 ` [Qemu-devel] [PATCH 06/13] hw/block/pflash_cfi02: Add helpers to manipulate the status bits Philippe Mathieu-Daudé 2019-05-05 22:15 ` Philippe Mathieu-Daudé 2019-05-05 22:15 ` [Qemu-devel] [PATCH 07/13] hw/block/pflash_cfi02: Simplify a statement using fall through Philippe Mathieu-Daudé 2019-05-05 22:15 ` Philippe Mathieu-Daudé 2019-05-05 22:15 ` [Qemu-devel] [PATCH 08/13] hw/block/pflash_cfi02: Use the ldst API in pflash_write() Philippe Mathieu-Daudé 2019-05-05 22:15 ` Philippe Mathieu-Daudé 2019-05-05 22:15 ` [Qemu-devel] [PATCH 09/13] hw/block/pflash_cfi02: Use the ldst API in pflash_read() Philippe Mathieu-Daudé 2019-05-05 22:15 ` Philippe Mathieu-Daudé 2019-05-05 22:15 ` [Qemu-devel] [PATCH 10/13] hw/block/pflash_cfi02: Extract the pflash_data_read() function Philippe Mathieu-Daudé 2019-05-05 22:15 ` Philippe Mathieu-Daudé 2019-05-05 22:15 ` Philippe Mathieu-Daudé [this message] 2019-05-05 22:15 ` [Qemu-devel] [PATCH 11/13] hw/block/pflash_cfi02: Unify the MemoryRegionOps Philippe Mathieu-Daudé 2019-05-05 22:15 ` [Qemu-devel] [PATCH 12/13] hw/block/pflash_cfi02: Fix command address comparison Philippe Mathieu-Daudé 2019-05-05 22:15 ` Philippe Mathieu-Daudé 2019-05-05 22:15 ` [Qemu-devel] [PATCH 13/13] hw/block/pflash_cfi02: Use the chip erase time specified in the CFI table Philippe Mathieu-Daudé 2019-05-05 22:15 ` Philippe Mathieu-Daudé 2019-06-26 20:33 ` [Qemu-devel] [Qemu-block] [PATCH 00/13] hw/block/pflash_cfi02: Clean-up and fixes John Snow 2019-06-26 21:06 ` Philippe Mathieu-Daudé 2019-06-26 21:09 ` John Snow
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20190505221544.31568-12-philmd@redhat.com \ --to=philmd@redhat.com \ --cc=alex.bennee@linaro.org \ --cc=armbru@redhat.com \ --cc=kwolf@redhat.com \ --cc=lvivier@redhat.com \ --cc=mreitz@redhat.com \ --cc=pbonzini@redhat.com \ --cc=peter.maydell@linaro.org \ --cc=qemu-block@nongnu.org \ --cc=qemu-devel@nongnu.org \ --cc=stephen.checkoway@oberlin.edu \ --cc=thuth@redhat.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).