qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Richard Henderson <richard.henderson@linaro.org>
To: qemu-devel@nongnu.org
Cc: peter.maydell@linaro.org, Stafford Horne <shorne@gmail.com>
Subject: [Qemu-devel] [PULL 15/27] target/openrisc: Convert to CPUClass::tlb_fill
Date: Fri, 10 May 2019 08:19:32 -0700	[thread overview]
Message-ID: <20190510151944.22981-16-richard.henderson@linaro.org> (raw)
In-Reply-To: <20190510151944.22981-1-richard.henderson@linaro.org>

Cc: Stafford Horne <shorne@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
 target/openrisc/cpu.h |  5 ++--
 target/openrisc/cpu.c |  5 ++--
 target/openrisc/mmu.c | 65 ++++++++++++++++++++++---------------------
 3 files changed, 39 insertions(+), 36 deletions(-)

diff --git a/target/openrisc/cpu.h b/target/openrisc/cpu.h
index 88a8c70092..9473d94d0c 100644
--- a/target/openrisc/cpu.h
+++ b/target/openrisc/cpu.h
@@ -344,8 +344,9 @@ hwaddr openrisc_cpu_get_phys_page_debug(CPUState *cpu, vaddr addr);
 int openrisc_cpu_gdb_read_register(CPUState *cpu, uint8_t *buf, int reg);
 int openrisc_cpu_gdb_write_register(CPUState *cpu, uint8_t *buf, int reg);
 void openrisc_translate_init(void);
-int openrisc_cpu_handle_mmu_fault(CPUState *cpu, vaddr address, int size,
-                                  int rw, int mmu_idx);
+bool openrisc_cpu_tlb_fill(CPUState *cs, vaddr address, int size,
+                           MMUAccessType access_type, int mmu_idx,
+                           bool probe, uintptr_t retaddr);
 int cpu_openrisc_signal_handler(int host_signum, void *pinfo, void *puc);
 int print_insn_or1k(bfd_vma addr, disassemble_info *info);
 
diff --git a/target/openrisc/cpu.c b/target/openrisc/cpu.c
index d125236977..3816baee70 100644
--- a/target/openrisc/cpu.c
+++ b/target/openrisc/cpu.c
@@ -149,9 +149,8 @@ static void openrisc_cpu_class_init(ObjectClass *oc, void *data)
     cc->set_pc = openrisc_cpu_set_pc;
     cc->gdb_read_register = openrisc_cpu_gdb_read_register;
     cc->gdb_write_register = openrisc_cpu_gdb_write_register;
-#ifdef CONFIG_USER_ONLY
-    cc->handle_mmu_fault = openrisc_cpu_handle_mmu_fault;
-#else
+    cc->tlb_fill = openrisc_cpu_tlb_fill;
+#ifndef CONFIG_USER_ONLY
     cc->get_phys_page_debug = openrisc_cpu_get_phys_page_debug;
     dc->vmsd = &vmstate_openrisc_cpu;
 #endif
diff --git a/target/openrisc/mmu.c b/target/openrisc/mmu.c
index 5dec68dcff..94c65a25fa 100644
--- a/target/openrisc/mmu.c
+++ b/target/openrisc/mmu.c
@@ -107,16 +107,42 @@ static void raise_mmu_exception(OpenRISCCPU *cpu, target_ulong address,
     cpu->env.lock_addr = -1;
 }
 
-int openrisc_cpu_handle_mmu_fault(CPUState *cs, vaddr address, int size,
-                                  int rw, int mmu_idx)
+bool openrisc_cpu_tlb_fill(CPUState *cs, vaddr addr, int size,
+                           MMUAccessType access_type, int mmu_idx,
+                           bool probe, uintptr_t retaddr)
 {
-#ifdef CONFIG_USER_ONLY
     OpenRISCCPU *cpu = OPENRISC_CPU(cs);
-    raise_mmu_exception(cpu, address, EXCP_DPF);
-    return 1;
-#else
-    g_assert_not_reached();
+    int excp = EXCP_DPF;
+
+#ifndef CONFIG_USER_ONLY
+    int prot;
+    hwaddr phys_addr;
+
+    if (mmu_idx == MMU_NOMMU_IDX) {
+        /* The mmu is disabled; lookups never fail.  */
+        get_phys_nommu(&phys_addr, &prot, addr);
+        excp = 0;
+    } else {
+        bool super = mmu_idx == MMU_SUPERVISOR_IDX;
+        int need = (access_type == MMU_INST_FETCH ? PAGE_EXEC
+                    : access_type == MMU_DATA_STORE ? PAGE_WRITE
+                    : PAGE_READ);
+        excp = get_phys_mmu(cpu, &phys_addr, &prot, addr, need, super);
+    }
+
+    if (likely(excp == 0)) {
+        tlb_set_page(cs, addr & TARGET_PAGE_MASK,
+                     phys_addr & TARGET_PAGE_MASK, prot,
+                     mmu_idx, TARGET_PAGE_SIZE);
+        return true;
+    }
+    if (probe) {
+        return false;
+    }
 #endif
+
+    raise_mmu_exception(cpu, addr, excp);
+    cpu_loop_exit_restore(cs, retaddr);
 }
 
 #ifndef CONFIG_USER_ONLY
@@ -156,29 +182,6 @@ hwaddr openrisc_cpu_get_phys_page_debug(CPUState *cs, vaddr addr)
 void tlb_fill(CPUState *cs, target_ulong addr, int size,
               MMUAccessType access_type, int mmu_idx, uintptr_t retaddr)
 {
-    OpenRISCCPU *cpu = OPENRISC_CPU(cs);
-    int prot, excp;
-    hwaddr phys_addr;
-
-    if (mmu_idx == MMU_NOMMU_IDX) {
-        /* The mmu is disabled; lookups never fail.  */
-        get_phys_nommu(&phys_addr, &prot, addr);
-        excp = 0;
-    } else {
-        bool super = mmu_idx == MMU_SUPERVISOR_IDX;
-        int need = (access_type == MMU_INST_FETCH ? PAGE_EXEC
-                    : access_type == MMU_DATA_STORE ? PAGE_WRITE
-                    : PAGE_READ);
-        excp = get_phys_mmu(cpu, &phys_addr, &prot, addr, need, super);
-    }
-
-    if (unlikely(excp)) {
-        raise_mmu_exception(cpu, addr, excp);
-        cpu_loop_exit_restore(cs, retaddr);
-    }
-
-    tlb_set_page(cs, addr & TARGET_PAGE_MASK,
-                 phys_addr & TARGET_PAGE_MASK, prot,
-                 mmu_idx, TARGET_PAGE_SIZE);
+    openrisc_cpu_tlb_fill(cs, addr, size, access_type, mmu_idx, 0, retaddr);
 }
 #endif
-- 
2.17.1



  parent reply	other threads:[~2019-05-10 15:44 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-10 15:19 [Qemu-devel] [PULL 00/27] tcg: Add CPUClass::tlb_fill Richard Henderson
2019-05-10 15:19 ` [Qemu-devel] [PULL 01/27] " Richard Henderson
2019-05-10 15:19 ` [Qemu-devel] [PULL 02/27] target/alpha: Convert to CPUClass::tlb_fill Richard Henderson
2019-05-10 15:19 ` [Qemu-devel] [PULL 03/27] target/arm: " Richard Henderson
2019-05-10 15:19 ` [Qemu-devel] [PULL 04/27] target/cris: " Richard Henderson
2019-05-10 15:19 ` [Qemu-devel] [PULL 05/27] target/hppa: " Richard Henderson
2019-05-10 15:19 ` [Qemu-devel] [PULL 06/27] target/i386: " Richard Henderson
2019-05-10 15:19 ` [Qemu-devel] [PULL 07/27] target/lm32: " Richard Henderson
2019-05-10 15:19 ` [Qemu-devel] [PULL 08/27] target/m68k: " Richard Henderson
2019-05-10 15:19 ` [Qemu-devel] [PULL 09/27] target/microblaze: " Richard Henderson
2019-05-10 15:19 ` [Qemu-devel] [PULL 10/27] target/mips: Pass a valid error to raise_mmu_exception for user-only Richard Henderson
2019-05-10 15:19 ` [Qemu-devel] [PULL 11/27] target/mips: Tidy control flow in mips_cpu_handle_mmu_fault Richard Henderson
2019-05-10 15:19 ` [Qemu-devel] [PULL 12/27] target/mips: Convert to CPUClass::tlb_fill Richard Henderson
2019-05-10 15:19 ` [Qemu-devel] [PULL 13/27] target/moxie: " Richard Henderson
2019-05-10 15:19 ` [Qemu-devel] [PULL 14/27] target/nios2: " Richard Henderson
2019-05-10 15:19 ` Richard Henderson [this message]
2019-05-10 15:19 ` [Qemu-devel] [PULL 16/27] target/ppc: " Richard Henderson
2019-05-10 15:19 ` [Qemu-devel] [PULL 17/27] target/riscv: " Richard Henderson
2019-05-10 15:19 ` [Qemu-devel] [PULL 18/27] target/s390x: " Richard Henderson
2019-05-10 15:19 ` [Qemu-devel] [PULL 19/27] target/sh4: " Richard Henderson
2019-05-10 15:19 ` [Qemu-devel] [PULL 20/27] target/sparc: " Richard Henderson
2019-05-10 15:19 ` [Qemu-devel] [PULL 21/27] target/tilegx: " Richard Henderson
2019-05-10 15:19 ` [Qemu-devel] [PULL 22/27] target/tricore: " Richard Henderson
2021-01-27 19:47   ` Philippe Mathieu-Daudé
2019-05-10 15:19 ` [Qemu-devel] [PULL 23/27] target/unicore32: " Richard Henderson
2019-05-10 15:19 ` [Qemu-devel] [PULL 24/27] target/xtensa: " Richard Henderson
2019-05-10 15:19 ` [Qemu-devel] [PULL 25/27] tcg: Use CPUClass::tlb_fill in cputlb.c Richard Henderson
2019-05-10 15:19 ` [Qemu-devel] [PULL 26/27] tcg: Remove CPUClass::handle_mmu_fault Richard Henderson
2019-05-10 15:19 ` [Qemu-devel] [PULL 27/27] tcg: Use tlb_fill probe from tlb_vaddr_to_host Richard Henderson
2019-05-10 17:44 ` [Qemu-devel] [PULL 00/27] tcg: Add CPUClass::tlb_fill Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190510151944.22981-16-richard.henderson@linaro.org \
    --to=richard.henderson@linaro.org \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    --cc=shorne@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).