qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Kevin Wolf <kwolf@redhat.com>
To: qemu-block@nongnu.org
Cc: kwolf@redhat.com, qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 03/24] block: Use BDRV_REQUEST_MAX_BYTES instead of BDRV_REQUEST_MAX_SECTORS
Date: Mon, 20 May 2019 18:14:32 +0200	[thread overview]
Message-ID: <20190520161453.30723-4-kwolf@redhat.com> (raw)
In-Reply-To: <20190520161453.30723-1-kwolf@redhat.com>

From: Alberto Garcia <berto@igalia.com>

There are a few places in which we turn a number of bytes into sectors
in order to compare the result against BDRV_REQUEST_MAX_SECTORS
instead of using BDRV_REQUEST_MAX_BYTES directly.

Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
 block/io.c     | 6 +++---
 qemu-io-cmds.c | 7 +++----
 2 files changed, 6 insertions(+), 7 deletions(-)

diff --git a/block/io.c b/block/io.c
index aeebc9c23c..3134a60a48 100644
--- a/block/io.c
+++ b/block/io.c
@@ -769,7 +769,7 @@ static bool coroutine_fn wait_serialising_requests(BdrvTrackedRequest *self)
 static int bdrv_check_byte_request(BlockDriverState *bs, int64_t offset,
                                    size_t size)
 {
-    if (size > BDRV_REQUEST_MAX_SECTORS << BDRV_SECTOR_BITS) {
+    if (size > BDRV_REQUEST_MAX_BYTES) {
         return -EIO;
     }
 
@@ -1017,7 +1017,7 @@ static int coroutine_fn bdrv_driver_preadv(BlockDriverState *bs,
 
     assert((offset & (BDRV_SECTOR_SIZE - 1)) == 0);
     assert((bytes & (BDRV_SECTOR_SIZE - 1)) == 0);
-    assert((bytes >> BDRV_SECTOR_BITS) <= BDRV_REQUEST_MAX_SECTORS);
+    assert(bytes <= BDRV_REQUEST_MAX_BYTES);
     assert(drv->bdrv_co_readv);
 
     return drv->bdrv_co_readv(bs, sector_num, nb_sectors, qiov);
@@ -1070,7 +1070,7 @@ static int coroutine_fn bdrv_driver_pwritev(BlockDriverState *bs,
 
     assert((offset & (BDRV_SECTOR_SIZE - 1)) == 0);
     assert((bytes & (BDRV_SECTOR_SIZE - 1)) == 0);
-    assert((bytes >> BDRV_SECTOR_BITS) <= BDRV_REQUEST_MAX_SECTORS);
+    assert(bytes <= BDRV_REQUEST_MAX_BYTES);
 
     assert(drv->bdrv_co_writev);
     ret = drv->bdrv_co_writev(bs, sector_num, nb_sectors, qiov,
diff --git a/qemu-io-cmds.c b/qemu-io-cmds.c
index 8826bebaf6..30a7d9a13b 100644
--- a/qemu-io-cmds.c
+++ b/qemu-io-cmds.c
@@ -538,7 +538,7 @@ static int do_write_compressed(BlockBackend *blk, char *buf, int64_t offset,
 {
     int ret;
 
-    if (bytes >> 9 > BDRV_REQUEST_MAX_SECTORS) {
+    if (bytes > BDRV_REQUEST_MAX_BYTES) {
         return -ERANGE;
     }
 
@@ -1781,10 +1781,9 @@ static int discard_f(BlockBackend *blk, int argc, char **argv)
     if (bytes < 0) {
         print_cvtnum_err(bytes, argv[optind]);
         return bytes;
-    } else if (bytes >> BDRV_SECTOR_BITS > BDRV_REQUEST_MAX_SECTORS) {
+    } else if (bytes > BDRV_REQUEST_MAX_BYTES) {
         printf("length cannot exceed %"PRIu64", given %s\n",
-               (uint64_t)BDRV_REQUEST_MAX_SECTORS << BDRV_SECTOR_BITS,
-               argv[optind]);
+               (uint64_t)BDRV_REQUEST_MAX_BYTES, argv[optind]);
         return -EINVAL;
     }
 
-- 
2.20.1



  parent reply	other threads:[~2019-05-20 16:17 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-20 16:14 [Qemu-devel] [PULL 00/24] Block layer patches Kevin Wolf
2019-05-20 16:14 ` [Qemu-devel] [PULL 01/24] block/file-posix: Truncate in xfs_write_zeroes() Kevin Wolf
2019-05-20 16:14 ` [Qemu-devel] [PULL 02/24] qcow2: Define and use QCOW2_COMPRESSED_SECTOR_SIZE Kevin Wolf
2019-05-20 16:14 ` Kevin Wolf [this message]
2019-05-20 16:14 ` [Qemu-devel] [PULL 04/24] qmp: forbid qmp_cont in RUN_STATE_FINISH_MIGRATE Kevin Wolf
2019-05-20 16:14 ` [Qemu-devel] [PULL 05/24] iotest: fix 169: do not run " Kevin Wolf
2019-05-20 16:14 ` [Qemu-devel] [PULL 06/24] nvme: fix copy direction in DMA reads going to CMB Kevin Wolf
2019-05-20 16:14 ` [Qemu-devel] [PULL 07/24] block: Add bdrv_try_set_aio_context() Kevin Wolf
2019-05-20 16:14 ` [Qemu-devel] [PULL 08/24] block: Make bdrv_attach/detach_aio_context() static Kevin Wolf
2019-05-20 16:14 ` [Qemu-devel] [PULL 09/24] block: Move recursion to bdrv_set_aio_context() Kevin Wolf
2019-05-20 16:14 ` [Qemu-devel] [PULL 10/24] block: Propagate AioContext change to parents Kevin Wolf
2019-05-20 16:14 ` [Qemu-devel] [PULL 11/24] test-block-iothread: Test AioContext propagation through the tree Kevin Wolf
2019-05-20 16:14 ` [Qemu-devel] [PULL 12/24] block: Implement .(can_)set_aio_ctx for BlockBackend Kevin Wolf
2019-05-20 16:14 ` [Qemu-devel] [PULL 13/24] block: Add blk_set_allow_aio_context_change() Kevin Wolf
2019-05-20 16:14 ` [Qemu-devel] [PULL 14/24] blockjob: Propagate AioContext change to all job nodes Kevin Wolf
2019-05-20 16:14 ` [Qemu-devel] [PULL 15/24] blockjob: Remove AioContext notifiers Kevin Wolf
2019-05-20 16:14 ` [Qemu-devel] [PULL 16/24] test-block-iothread: Test AioContext propagation for block jobs Kevin Wolf
2019-05-20 16:14 ` [Qemu-devel] [PULL 17/24] block/file-posix: Unaligned O_DIRECT block-status Kevin Wolf
2019-05-20 16:14 ` [Qemu-devel] [PULL 18/24] iotests: Test unaligned raw images with O_DIRECT Kevin Wolf
2019-05-20 16:14 ` [Qemu-devel] [PULL 19/24] qemu-img.texi: Be specific about JSON object types Kevin Wolf
2019-05-20 16:14 ` [Qemu-devel] [PULL 20/24] qemu-img.texi: Describe human-readable info output Kevin Wolf
2019-05-20 16:14 ` [Qemu-devel] [PULL 21/24] block: Improve "Block node is read-only" message Kevin Wolf
2019-05-20 16:14 ` [Qemu-devel] [PULL 22/24] iotests.py: Let assert_qmp() accept an array Kevin Wolf
2019-05-20 16:14 ` [Qemu-devel] [PULL 23/24] iotests.py: Fix VM.run_job Kevin Wolf
2019-05-20 16:14 ` [Qemu-devel] [PULL 24/24] iotests: Make 245 faster and more reliable Kevin Wolf
2019-05-20 17:08 ` [Qemu-devel] [PULL 00/24] Block layer patches Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190520161453.30723-4-kwolf@redhat.com \
    --to=kwolf@redhat.com \
    --cc=qemu-block@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).