qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Jon Doron <arilou@gmail.com>
To: qemu-devel@nongnu.org
Cc: alex.bennee@linaro.org, Jon Doron <arilou@gmail.com>
Subject: [Qemu-devel] [PATCH v10 20/20] gdbstub: Implement qemu physical memory mode
Date: Tue, 21 May 2019 12:59:48 +0300	[thread overview]
Message-ID: <20190521095948.8204-21-arilou@gmail.com> (raw)
In-Reply-To: <20190521095948.8204-1-arilou@gmail.com>

Add a new query/set which changes the memory GDB sees to physical memory
only.

gdb> maint packet qqemu.PhyMemMode
will reply the current phy_mem_mode state (1 for enabled, 0 for disabled)
gdb> maint packet Qqemu.PhyMemMode:1
Will make GDB read/write only to physical memory, set to 0 to disable

Signed-off-by: Jon Doron <arilou@gmail.com>
---
 gdbstub.c | 62 +++++++++++++++++++++++++++++++++++++++++++++++++++++--
 1 file changed, 60 insertions(+), 2 deletions(-)

diff --git a/gdbstub.c b/gdbstub.c
index 9dd934a079..c9269319d8 100644
--- a/gdbstub.c
+++ b/gdbstub.c
@@ -46,11 +46,27 @@
 #define GDB_ATTACHED "1"
 #endif
 
+#ifndef CONFIG_USER_ONLY
+static int phy_memory_mode;
+#endif
+
 static inline int target_memory_rw_debug(CPUState *cpu, target_ulong addr,
                                          uint8_t *buf, int len, bool is_write)
 {
-    CPUClass *cc = CPU_GET_CLASS(cpu);
+    CPUClass *cc;
 
+#ifndef CONFIG_USER_ONLY
+    if (phy_memory_mode) {
+        if (is_write) {
+            cpu_physical_memory_write(addr, buf, len);
+        } else {
+            cpu_physical_memory_read(addr, buf, len);
+        }
+        return 0;
+    }
+#endif
+
+    cc = CPU_GET_CLASS(cpu);
     if (cc->memory_rw_debug) {
         return cc->memory_rw_debug(cpu, addr, buf, len, is_write);
     }
@@ -2118,8 +2134,36 @@ static void handle_query_attached(GdbCmdContext *gdb_ctx, void *user_ctx)
 
 static void handle_query_qemu_supported(GdbCmdContext *gdb_ctx, void *user_ctx)
 {
-    put_packet(gdb_ctx->s, "sstepbits;sstep");
+    snprintf(gdb_ctx->str_buf, sizeof(gdb_ctx->str_buf), "sstepbits;sstep");
+#ifndef CONFIG_USER_ONLY
+    pstrcat(gdb_ctx->str_buf, sizeof(gdb_ctx->str_buf), ";PhyMemMode");
+#endif
+    put_packet(gdb_ctx->s, gdb_ctx->str_buf);
+}
+
+#ifndef CONFIG_USER_ONLY
+static void handle_query_qemu_phy_mem_mode(GdbCmdContext *gdb_ctx,
+                                           void *user_ctx)
+{
+    snprintf(gdb_ctx->str_buf, sizeof(gdb_ctx->str_buf), "%d", phy_memory_mode);
+    put_packet(gdb_ctx->s, gdb_ctx->str_buf);
+}
+
+static void handle_set_qemu_phy_mem_mode(GdbCmdContext *gdb_ctx, void *user_ctx)
+{
+    if (!gdb_ctx->num_params) {
+        put_packet(gdb_ctx->s, "E22");
+        return;
+    }
+
+    if (!gdb_ctx->params[0].val_ul) {
+        phy_memory_mode = 0;
+    } else {
+        phy_memory_mode = 1;
+    }
+    put_packet(gdb_ctx->s, "OK");
 }
+#endif
 
 static GdbCmdParseEntry gdb_gen_query_set_common_table[] = {
     /* Order is important if has same prefix */
@@ -2201,6 +2245,12 @@ static GdbCmdParseEntry gdb_gen_query_table[] = {
         .handler = handle_query_qemu_supported,
         .cmd = "qemu.Supported",
     },
+#ifndef CONFIG_USER_ONLY
+    {
+        .handler = handle_query_qemu_phy_mem_mode,
+        .cmd = "qemu.PhyMemMode",
+    },
+#endif
 };
 
 static GdbCmdParseEntry gdb_gen_set_table[] = {
@@ -2211,6 +2261,14 @@ static GdbCmdParseEntry gdb_gen_set_table[] = {
         .cmd_startswith = 1,
         .schema = "l0"
     },
+#ifndef CONFIG_USER_ONLY
+    {
+        .handler = handle_set_qemu_phy_mem_mode,
+        .cmd = "qemu.PhyMemMode:",
+        .cmd_startswith = 1,
+        .schema = "l0"
+    },
+#endif
 };
 
 static void handle_gen_query(GdbCmdContext *gdb_ctx, void *user_ctx)
-- 
2.21.0



  parent reply	other threads:[~2019-05-21 10:16 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-21  9:59 [Qemu-devel] [PATCH v10 00/20] gdbstub: Refactor command packets handler Jon Doron
2019-05-21  9:59 ` [Qemu-devel] [PATCH v10 01/20] gdbstub: Add infrastructure to parse cmd packets Jon Doron
2019-05-21  9:59 ` [Qemu-devel] [PATCH v10 02/20] gdbstub: Implement deatch (D pkt) with new infra Jon Doron
2019-05-21  9:59 ` [Qemu-devel] [PATCH v10 03/20] gdbstub: Implement thread_alive (T " Jon Doron
2019-05-21  9:59 ` [Qemu-devel] [PATCH v10 04/20] gdbstub: Implement continue (c " Jon Doron
2019-05-21  9:59 ` [Qemu-devel] [PATCH v10 05/20] gdbstub: Implement continue with signal (C " Jon Doron
2019-05-21  9:59 ` [Qemu-devel] [PATCH v10 06/20] gdbstub: Implement set_thread (H " Jon Doron
2019-05-21  9:59 ` [Qemu-devel] [PATCH v10 07/20] gdbstub: Implement breakpoint commands (Z/z " Jon Doron
2019-05-21  9:59 ` [Qemu-devel] [PATCH v10 08/20] gdbstub: Implement set register (P " Jon Doron
2019-05-21  9:59 ` [Qemu-devel] [PATCH v10 09/20] gdbstub: Implement get register (p " Jon Doron
2019-05-21  9:59 ` [Qemu-devel] [PATCH v10 10/20] gdbstub: Implement write memory (M " Jon Doron
2019-05-21  9:59 ` [Qemu-devel] [PATCH v10 11/20] gdbstub: Implement read memory (m " Jon Doron
2019-05-21  9:59 ` [Qemu-devel] [PATCH v10 12/20] gdbstub: Implement write all registers (G " Jon Doron
2019-05-21  9:59 ` [Qemu-devel] [PATCH v10 13/20] gdbstub: Implement read all registers (g " Jon Doron
2019-05-21  9:59 ` [Qemu-devel] [PATCH v10 14/20] gdbstub: Implement file io (F " Jon Doron
2019-05-21  9:59 ` [Qemu-devel] [PATCH v10 15/20] gdbstub: Implement step (s " Jon Doron
2019-05-21  9:59 ` [Qemu-devel] [PATCH v10 16/20] gdbstub: Implement v commands " Jon Doron
2019-05-21  9:59 ` [Qemu-devel] [PATCH v10 17/20] gdbstub: Implement generic set/query (Q/q pkt) " Jon Doron
2019-05-21  9:59 ` [Qemu-devel] [PATCH v10 18/20] gdbstub: Implement target halted (? " Jon Doron
2019-05-21  9:59 ` [Qemu-devel] [PATCH v10 19/20] gdbstub: Clear unused variables in gdb_handle_packet Jon Doron
2019-05-21  9:59 ` Jon Doron [this message]
2019-05-23 10:36 ` [Qemu-devel] [PATCH v10 00/20] gdbstub: Refactor command packets handler Alex Bennée

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190521095948.8204-21-arilou@gmail.com \
    --to=arilou@gmail.com \
    --cc=alex.bennee@linaro.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).